From 6d58f346a61ff50eda740e6216e9829e572d75c8 Mon Sep 17 00:00:00 2001 From: John Youn Date: Thu, 17 Dec 2015 11:15:49 -0800 Subject: [PATCH] usb: dwc2: Rename dwc2_core_reset() Renamed dwc2_core_reset() to dwc2_core_reset_and_force_dr_mode(). This describes what it is doing more accurately. This is in preparation of introducing a plain dwc2_core_reset() function that only performs the reset and doesn't force the mode. Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/core.c | 8 ++++---- drivers/usb/dwc2/core.h | 2 +- drivers/usb/dwc2/platform.c | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 62505068abf2..eb291c9e3c16 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -481,7 +481,7 @@ static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg) * Do core a soft reset of the core. Be careful with this because it * resets all the internal state machines of the core. */ -int dwc2_core_reset(struct dwc2_hsotg *hsotg) +int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg) { u32 greset; int count = 0; @@ -561,7 +561,7 @@ static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); /* Reset after a PHY select */ - retval = dwc2_core_reset(hsotg); + retval = dwc2_core_reset_and_force_dr_mode(hsotg); if (retval) { dev_err(hsotg->dev, @@ -640,7 +640,7 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); /* Reset after setting the PHY parameters */ - retval = dwc2_core_reset(hsotg); + retval = dwc2_core_reset_and_force_dr_mode(hsotg); if (retval) { dev_err(hsotg->dev, "%s: Reset failed, aborting", __func__); @@ -805,7 +805,7 @@ int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup) * needed to in order to properly detect various parameters). */ if (!initial_setup) { - retval = dwc2_core_reset(hsotg); + retval = dwc2_core_reset_and_force_dr_mode(hsotg); if (retval) { dev_err(hsotg->dev, "%s(): Reset failed, aborting\n", __func__); diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index cbece3a68c30..d1989c68c728 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -880,7 +880,7 @@ enum dwc2_halt_status { * The following functions support initialization of the core driver component * and the DWC_otg controller */ -extern int dwc2_core_reset(struct dwc2_hsotg *hsotg); +extern int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg); extern void dwc2_core_host_init(struct dwc2_hsotg *hsotg); extern int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg); extern int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, bool restore); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index a72302d740dd..8bd7315a06c9 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -460,7 +460,7 @@ static int dwc2_driver_probe(struct platform_device *dev) * Reset before dwc2_get_hwparams() then it could get power-on real * reset value form registers. */ - dwc2_core_reset(hsotg); + dwc2_core_reset_and_force_dr_mode(hsotg); /* Detect config values from hardware */ retval = dwc2_get_hwparams(hsotg); -- 2.30.2