From 6a35b6f09b8ef19ac99342951e49e3b242b5093b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 24 Jan 2008 18:41:24 -0500 Subject: [PATCH] [POWERPC] 85xx: Add v1 device tree source for Wind River SBC8560 board This adds a v1 device tree source for the Wind River SBC8560 board. The biggest difference between this and the MPC8560ADS reference platform dts is the use of an external 16550 compatible UART instead of the CPM2. Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/sbc8560.dts | 330 ++++++++++++++++++++++++++++++ 1 file changed, 330 insertions(+) create mode 100644 arch/powerpc/boot/dts/sbc8560.dts diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts new file mode 100644 index 000000000000..0476802fba60 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8560.dts @@ -0,0 +1,330 @@ +/* + * SBC8560 Device Tree Source + * + * Copyright 2007 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "SBC8560"; + compatible = "SBC8560"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + soc@ff700000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xff700000 0x00100000>; + reg = <0xff700000 0x00100000>; + clock-frequency = <0>; + + memory-controller@2000 { + compatible = "fsl,8560-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <0x12 0x2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8560-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <0x20>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <0x10 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy0: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <0x6 0x1>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1a { + interrupt-parent = <&mpic>; + interrupts = <0x7 0x1>; + reg = <0x1a>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@1b { + interrupt-parent = <&mpic>; + interrupts = <0x8 0x1>; + reg = <0x1b>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@1c { + interrupt-parent = <&mpic>; + interrupts = <0x8 0x1>; + reg = <0x1c>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <165000000>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x2e 0x2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + enet2: ethernet@91320 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x16200300>; + interrupts = <0x21 0x8>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy2>; + }; + + enet3: ethernet@91340 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x1a400300>; + interrupts = <0x22 0x8>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy3>; + }; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8560-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pci@ff708000 { + cell-index = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xff708000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x02 */ + 0x1000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x1000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x1000 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x1000 0x0 0x0 0x4 &mpic 0x5 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + }; + + localbus@ff705000 { + compatible = "fsl,mpc8560-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xff705000 0x100>; // BRx, ORx, etc. + + ranges = < + 0x0 0x0 0xff800000 0x0800000 // 8MB boot flash + 0x1 0x0 0xe4000000 0x4000000 // 64MB flash + 0x3 0x0 0x20000000 0x4000000 // 64MB SDRAM + 0x4 0x0 0x24000000 0x4000000 // 64MB SDRAM + 0x5 0x0 0xfc000000 0x0c00000 // EPLD + 0x6 0x0 0xe0000000 0x4000000 // 64MB flash + 0x7 0x0 0x80000000 0x0200000 // ATM1,2 + >; + + epld@5,0 { + compatible = "wrs,epld-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x5 0x0 0xc00000>; + ranges = < + 0x0 0x0 0x5 0x000000 0x1fff // LED disp. + 0x1 0x0 0x5 0x100000 0x1fff // switches + 0x2 0x0 0x5 0x200000 0x1fff // ID reg. + 0x3 0x0 0x5 0x300000 0x1fff // status reg. + 0x4 0x0 0x5 0x400000 0x1fff // reset reg. + 0x5 0x0 0x5 0x500000 0x1fff // Wind port + 0x7 0x0 0x5 0x700000 0x1fff // UART #1 + 0x8 0x0 0x5 0x800000 0x1fff // UART #2 + 0x9 0x0 0x5 0x900000 0x1fff // RTC + 0xb 0x0 0x5 0xb00000 0x1fff // EEPROM + >; + + bidr@2,0 { + compatible = "wrs,sbc8560-bidr"; + reg = <0x2 0x0 0x10>; + }; + + bcsr@3,0 { + compatible = "wrs,sbc8560-bcsr"; + reg = <0x3 0x0 0x10>; + }; + + brstcr@4,0 { + compatible = "wrs,sbc8560-brstcr"; + reg = <0x4 0x0 0x10>; + }; + + serial0: serial@7,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x7 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <0x9 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@8,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x8 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <0xa 0x2>; + interrupt-parent = <&mpic>; + }; + + rtc@9,0 { + compatible = "m48t59"; + reg = <0x9 0x0 0x1fff>; + }; + }; + }; +}; -- 2.30.2