From 69df7eb73d9922e5e717b004aae06f93fe692dba Mon Sep 17 00:00:00 2001 From: Michal Cieslakiewicz Date: Wed, 16 Oct 2019 12:38:43 +0200 Subject: [PATCH] ath79: add LAN LEDs control bits for AR724x GPIO function pinmux Currently AR724x pinmux for register 0x18040028 controls only JTAG disable bit. This patch adds new DTS settings to control LAN LEDs and CLKs that allow full software control over these diodes - exactly the same is done by ar71xx target in device setup phase for many routers (WNR2000v3 for example). 'switch_led_disable_pins' clears AR724X_GPIO_FUNC_ETH_SWITCH_LED[0-4]_EN bits. 'clks_disable_pins' clears AR724X_GPIO_FUNC_CLK_OBS[1-5]_EN and AR724X_GPIO_FUNC_GE0_MII_CLK_EN bits. These all should be used together, along with 'jtag_disable_pins', to allow OS to control all GPIO-connected LEDs and buttons on device. Signed-off-by: Michal Cieslakiewicz --- target/linux/ath79/dts/ar724x.dtsi | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/target/linux/ath79/dts/ar724x.dtsi b/target/linux/ath79/dts/ar724x.dtsi index b2844bf17941..95832d998ad3 100644 --- a/target/linux/ath79/dts/ar724x.dtsi +++ b/target/linux/ath79/dts/ar724x.dtsi @@ -75,7 +75,15 @@ #pinctrl-cells = <2>; jtag_disable_pins: pinmux_jtag_disable_pins { - pinctrl-single,bits = <0x0 0x1 0x1>; + pinctrl-single,bits = <0x0 0x1 0x1>; + }; + + switch_led_disable_pins: pinmux_switch_led_disable_pins { + pinctrl-single,bits = <0x0 0x0 0xf8>; + }; + + clks_disable_pins: pinmux_clks_disable_pins { + pinctrl-single,bits = <0x0 0x0 0x81f00>; }; }; -- 2.30.2