From 692ef26e72fcce0c1e73c41683fd3512f3719d55 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 20 Feb 2019 11:52:14 +0100 Subject: [PATCH] gpio: of: Restrict enable-gpio quirk to regulator-gpio Commit 0e7d6f940164 ("gpio: of: Apply regulator-gpio quirk only to enable-gpios") breaks the device tree ABI specified in the device tree bindings for fixed regulators (compatible "regulator-fixed"). According to these bindings the polarity of the GPIO is exclusively controlled by the presence or absence of the enable-active-high property. As such the polarity quirk implemented in of_gpio_flags_quirks() must be applied to the GPIO specified for fixed regulators. However, commit 0e7d6f940164 ("gpio: of: Apply regulator-gpio quirk only to enable-gpios") restricted the quirk to the enable-gpios property for fixed regulators as well, whereas according to the commit message itself it should only apply to "regulator-gpio" compatible device tree nodes. Fix this by actually implementing what the offending commit intended, which is to ensure that the quirk is applied to the GPIO specified by the "enable-gpio" property for the "regulator-gpio" bindings only. This fixes a regression on Jetson TX1 where the fixed regulator for the HDMI +5V pin relies on the flags quirk for the proper polarity. Fixes: 0e7d6f940164 ("gpio: of: Apply regulator-gpio quirk only to enable-gpios") Signed-off-by: Thierry Reding Tested-by: Marek Vasut Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-of.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index 4547dba19956..950d3d6b2b7f 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -84,10 +84,10 @@ static void of_gpio_flags_quirks(struct device_node *np, * Note that active low is the default. */ if (IS_ENABLED(CONFIG_REGULATOR) && - !strcmp(propname, "enable-gpio") && (of_device_is_compatible(np, "regulator-fixed") || of_device_is_compatible(np, "reg-fixed-voltage") || - of_device_is_compatible(np, "regulator-gpio"))) { + (of_device_is_compatible(np, "regulator-gpio") && + strcmp(propname, "enable-gpio") == 0))) { /* * The regulator GPIO handles are specified such that the * presence or absence of "enable-active-high" solely controls -- 2.30.2