From 68d6963c44bdc7a0a073785fa6ead37464b63ca0 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Tue, 31 May 2011 02:12:50 +0000 Subject: [PATCH] arm/km: rename mgcoge2un to mgcoge3un The mgcoge2un target was only an intermediate step to mgcoge3un. For this reason the mgcoge2un support was moved to mgcoge3un, because it isn't needed to support both targets. We add the BootROM init file for the mgcoge3un memphis RAM. We also move the suen3 and suen8 boards into the correct category in the MAINTAINERS file. Signed-off-by: Valentin Longchamp Signed-off-by: Holger Brunck Acked-by: Heiko Schocher cc: Wolfgang Denk cc: Detlev Zundel cc: Prafulla Wadaskar --- MAINTAINERS | 6 +- board/keymile/km_arm/kwbimage-memphis.cfg | 197 +++++++++++++++++++ boards.cfg | 2 +- include/configs/{mgcoge2un.h => mgcoge3un.h} | 15 +- 4 files changed, 210 insertions(+), 10 deletions(-) create mode 100644 board/keymile/km_arm/kwbimage-memphis.cfg rename include/configs/{mgcoge2un.h => mgcoge3un.h} (81%) diff --git a/MAINTAINERS b/MAINTAINERS index 30c327b41b..9660459222 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -430,13 +430,10 @@ Heiko Schocher kmsupx5 MPC8321 mgcoge MPC8247 mgcoge3ne MPC8247 - mgcoge2un ARM926EJS (Kirkwood SoC) mucmc52 MPC5200 muas3001 MPC8270 municse MPC5200 sc3 PPC405GP - suen3 ARM926EJS (Kirkwood SoC) - suen8 ARM926EJS (Kirkwood SoC) suvd3 MPC8321 tuda1 MPC8321 tuxa1 MPC8321 @@ -820,6 +817,9 @@ Jens Scharsig Heiko Schocher magnesium i.MX27 + mgcoge3un ARM926EJS (Kirkwood SoC) + suen3 ARM926EJS (Kirkwood SoC) + suen8 ARM926EJS (Kirkwood SoC) Robert Schwebel diff --git a/board/keymile/km_arm/kwbimage-memphis.cfg b/board/keymile/km_arm/kwbimage-memphis.cfg new file mode 100644 index 0000000000..2faaf2b4c9 --- /dev/null +++ b/board/keymile/km_arm/kwbimage-memphis.cfg @@ -0,0 +1,197 @@ +# +# (C) Copyright 2010 +# Heiko Schocher, DENX Software Engineering, hs@denx.de. +# +# (C) Copyright 2011 +# Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM spi # Boot from SPI flash + +DATA 0xFFD10000 0x01112222 # MPP Control 0 Register +# bit 3-0: MPPSel0 2, NF_IO[2] +# bit 7-4: MPPSel1 2, NF_IO[3] +# bit 12-8: MPPSel2 2, NF_IO[4] +# bit 15-12: MPPSel3 2, NF_IO[5] +# bit 19-16: MPPSel4 1, NF_IO[6] +# bit 23-20: MPPSel5 1, NF_IO[7] +# bit 27-24: MPPSel6 1, SYSRST_O +# bit 31-28: MPPSel7 0, GPO[7] + +DATA 0xFFD10004 0x03303300 + +DATA 0xFFD10008 0x00001100 # MPP Control 2 Register +# bit 3-0: MPPSel16 0, GPIO[16] +# bit 7-4: MPPSel17 0, GPIO[17] +# bit 12-8: MPPSel18 1, NF_IO[0] +# bit 15-12: MPPSel19 1, NF_IO[1] +# bit 19-16: MPPSel20 0, GPIO[20] +# bit 23-20: MPPSel21 0, GPIO[21] +# bit 27-24: MPPSel22 0, GPIO[22] +# bit 31-28: MPPSel23 0, GPIO[23] + +DATA 0xFFD100E0 0x1B1B1B1B # IO Configuration 0 Register +DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register +DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register +DATA 0xFFD20154 0x00000200 # CPU RAM Management Control3 Register +DATA 0xFFD2014C 0x00001C00 # CPU RAM Management Control1 Register +DATA 0xFFD20148 0x00000001 # CPU RAM Management Control0 Register + +#Dram initalization +DATA 0xFFD01400 0x430004E0 # SDRAM Configuration Register +# bit13-0: 0x4E0 (DDR2 clks refresh rate) +# bit23-14: zero +# bit24: 1= enable exit self refresh mode on DDR access +# bit25: 1 required +# bit29-26: zero +# bit31-30: 01 + +DATA 0xFFD01404 0x38543000 # DDR Controller Control Low +# bit 3-0: 0 reserved +# bit 4: 0=addr/cmd in smame cycle +# bit 5: 0=clk is driven during self refresh, we don't care for APX +# bit 6: 0=use recommended falling edge of clk for addr/cmd +# bit14: 0=input buffer always powered up +# bit18: 1=cpu lock transaction enabled +# bit23-20: 5=recommended value for CL=4 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 8= CL+4, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 3 required +# bit31: 0=no additional STARTBURST delay + +DATA 0xFFD01408 0x2302433E # DDR Timing (Low) (active cycles value +1) +# bit3-0: TRAS lsbs +# bit7-4: TRCD +# bit11- 8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xFFD0140C 0x00000A3E # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: zero required + +DATA 0xFFD01410 0x00000001 # DDR Address Control +# bit1-0: 01, Cs0width=x16 +# bit3-2: 00, Cs0size=2Gb +# bit5-4: 00, Cs2width=nonexistent +# bit7-6: 00, Cs1size =nonexistent +# bit9-8: 00, Cs2width=nonexistent +# bit11-10: 00, Cs2size =nonexistent +# bit13-12: 00, Cs3width=nonexistent +# bit15-14: 00, Cs3size =nonexistent +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0 required + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0 required + +DATA 0xFFD01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0 required + +DATA 0xFFD0141C 0x00000652 # DDR Mode +DATA 0xFFD01420 0x00000006 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 1, DDR drive strenght reduced +# bit2: 1, DDR ODT control lsd disabled +# bit5-3: 000, required +# bit6: 0, DDR ODT control msb disabled +# bit9-7: 000, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0 required + +DATA 0xFFD01424 0x0000F17F # DDR Controller Control High +# bit2-0: 111, required +# bit3 : 1 , MBUS Burst Chop disabled +# bit6-4: 111, required +# bit7 : 0 +# bit8 : 1 , add a sample stage +# bit9 : 0 , no half clock cycle addition to dataout +# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals +# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh +# bit15-12: 1111 required +# bit31-16: 0 required + +DATA 0xFFD01428 0x00084520 # DDR2 SDRAM Timing Low +# bit3-0 : 0000, required +# bit7-4 : 0010, M_ODT assertion 2 cycles after read +# bit11-8 : 1001, M_ODT de-assertion 5 cycles after read +# bit15-12: 0100, internal ODT assertion 4 cycles after read +# bit19-16: 1000, internal ODT de-assertion 8 cycles after read +# bit31-20: 0 , required + +DATA 0xFFD0147c 0x00008451 # DDR2 SDRAM Timing High +# bit3-0 : 0001, M_ODT assertion same cycle as write +# bit7-4 : 0101, M_ODT de-assertion x cycles after write +# bit11-8 : 0100, internal ODT assertion x cycles after write +# bit15-12: 1000, internal ODT de-assertion x cycles after write + +DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 +DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size +# bit0: 1, Window enabled +# bit1: 0, Write Protect disabled +# bit3-2: 00, CS0 hit selected +# bit23-4: ones, required +# bit31-24: 0x0F, Size (i.e. 256MB) + +DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled + +DATA 0xFFD01494 0x00010000 # DDR ODT Control (Low) +# bit3-0: 0, ODT0Rd, MODT[0] not asserted during read from DRAM CS0 +# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 + +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) +# bit1-0: 00, ODT0 controlled by ODT Control (low) register above +# bit3-2: 00, ODT1 controlled by register +# bit31-4: zero, required + +DATA 0xFFD0149C 0x0000F801 # CPU ODT Control +# bit3-0: 1, ODT0Rd, Internal ODT asserted during read from DRAM bank0 +# bit7-4: 0, ODT0Wr, Internal ODT not asserted during write to DRAM bank0 +# bit9-8: 0, ODTEn, controlled by ODT0Rd and ODT0Wr +# bit11-10:2, DQ_ODTSel. ODT select turned on, 75 ohm +# bit13-12:3, STARTBURST ODT buffer selected, 50 ohm +# bit14 :1, STARTBURST ODT enabled +# bit15 :1, Use ODT Block + +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +# bit0=1, enable DDR init upon this register write + +# End of Header extension +DATA 0x0 0x0 diff --git a/boards.cfg b/boards.cfg index ced8788a15..ea5a850f14 100644 --- a/boards.cfg +++ b/boards.cfg @@ -108,7 +108,7 @@ davinci_sffsdr arm arm926ejs sffsdr davinci davinci_sonata arm arm926ejs sonata davinci davinci suen3 arm arm926ejs km_arm keymile kirkwood suen8 arm arm926ejs km_arm keymile kirkwood -mgcoge2un arm arm926ejs km_arm keymile kirkwood +mgcoge3un arm arm926ejs km_arm keymile kirkwood guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood openrd_base arm arm926ejs openrd Marvell kirkwood openrd:BOARD_IS_OPENRD_BASE diff --git a/include/configs/mgcoge2un.h b/include/configs/mgcoge3un.h similarity index 81% rename from include/configs/mgcoge2un.h rename to include/configs/mgcoge3un.h index 4e2a7740d7..22d1961689 100644 --- a/include/configs/mgcoge2un.h +++ b/include/configs/mgcoge3un.h @@ -31,8 +31,8 @@ /* for linking errors see * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */ -#ifndef _CONFIG_MGCOGE2UN_H -#define _CONFIG_MGCOGE2UN_H +#ifndef _CONFIG_MGCOGE3UN_H +#define _CONFIG_MGCOGE3UN_H /* include common defines/options for all arm based Keymile boards */ #include "km/km_arm.h" @@ -40,11 +40,14 @@ /* * Version number information */ -#define CONFIG_IDENT_STRING "\nKeymile MGCOGE2UN" - -#define CONFIG_HOSTNAME mgcoge2un +#define CONFIG_IDENT_STRING "\nKeymile MGCOGE3UN" +#define CONFIG_HOSTNAME mgcoge3un +#define CONFIG_MGCOGE3UN #define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ #define KM_ENV_BUS "pca9547:70:d" /* I2C2 (Mux-Port 5)*/ -#endif /* _CONFIG_MGCOGE2UN_H */ +/* we use a new RAM type on mgcoge3un board */ +#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg + +#endif /* _CONFIG_MGCOGE3UN_H */ -- 2.30.2