From 6801b827e41dead8fe2e77654f4309ff7fcd47fa Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Wed, 27 Oct 2021 19:40:45 +0200 Subject: [PATCH] ath79: mikrotik: enable SFP on RB921GS-5HPacD (mANTBox 15s) This patch enables the SFP cage on the MikroTik RouterBOARD 921GS-5HPacD (mANTBox 15s). The RB922UAGS-5HPacD had it already working, so the support code is moved to the common DTSI file both devices share. Tested on a RouterBOARD 921GS-5HPacD with a MikroTik S-53LC20D module. Signed-off-by: Roger Pueyo Centelles --- ...58_mikrotik_routerboard-922uags-5hpacd.dts | 48 ------------------- .../dts/qca9558_mikrotik_routerboard-92x.dtsi | 48 +++++++++++++++++++ target/linux/ath79/image/mikrotik.mk | 3 +- .../base-files/etc/board.d/02_network | 3 +- 4 files changed, 51 insertions(+), 51 deletions(-) diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts index 36979bbd335..8ad834fe61a 100644 --- a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts +++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts @@ -23,27 +23,6 @@ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; }; }; - - i2c: i2c { - compatible = "i2c-gpio"; - - sda-gpios = <&gpio 18 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio 19 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <5>; - i2c-gpio,timeout-ms = <1>; - }; - - sfp1: sfp { - compatible = "sff,sfp"; - - i2c-bus = <&i2c>; - maximum-power-milliwatt = <1000>; - los-gpios = <&gpio 21 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - tx-disable-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; - // Toggling GPIO16 actually enables/disables the transmitter, - // but the SFP driver does not seem to be using it. - }; }; &pcie0 { @@ -76,30 +55,3 @@ &usb_phy1 { status = "okay"; }; - -&mdio1 { - status = "okay"; - - phy_sfp: ethernet-phy@0 { - reg = <0>; - phy-mode = "sgmii"; - sfp = <&sfp1>; - }; -}; - -ð1 { - status = "okay"; - - phy-handle = <&phy_sfp>; - pll-data = <0x03000000 0x00000101 0x00001616>; - qca955x-sgmii-fixup; - - gmac-config { - device = <&gmac>; - }; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi index 5e919856a55..d71c12c1fd7 100644 --- a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi +++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi @@ -42,6 +42,27 @@ gpios = <&gpio 23 GPIO_ACTIVE_LOW>; }; }; + + i2c: i2c { + compatible = "i2c-gpio"; + + sda-gpios = <&gpio 18 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio 19 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + i2c-gpio,timeout-ms = <1>; + }; + + sfp1: sfp { + compatible = "sff,sfp"; + + i2c-bus = <&i2c>; + maximum-power-milliwatt = <1000>; + los-gpios = <&gpio 21 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + // Toggling GPIO16 actually enables/disables the transmitter, + // but the SFP driver does not seem to be using it. + }; }; &mdio0 { @@ -64,6 +85,33 @@ }; }; +&mdio1 { + status = "okay"; + + phy_sfp: ethernet-phy@0 { + reg = <0>; + phy-mode = "sgmii"; + sfp = <&sfp1>; + }; +}; + +ð1 { + status = "okay"; + + phy-handle = <&phy_sfp>; + pll-data = <0x03000000 0x00000101 0x00001616>; + qca955x-sgmii-fixup; + + gmac-config { + device = <&gmac>; + }; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + &spi { status = "okay"; diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk index 4256f773792..2324ecc195d 100644 --- a/target/linux/ath79/image/mikrotik.mk +++ b/target/linux/ath79/image/mikrotik.mk @@ -22,7 +22,8 @@ define Device/mikrotik_routerboard-921gs-5hpacd-15s $(Device/mikrotik_nand) SOC := qca9558 DEVICE_MODEL := RouterBOARD 921GS-5HPacD-15s (mANTBox 15s) - DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct + DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-i2c-gpio \ + kmod-sfp SUPPORTED_DEVICES += rb-921gs-5hpacd-r2 endef TARGET_DEVICES += mikrotik_routerboard-921gs-5hpacd-15s diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network index d4a32c1e1aa..40587421332 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -15,7 +15,6 @@ ath79_setup_interfaces() "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" ;; mikrotik,routerboard-912uag-2hpnd|\ - mikrotik,routerboard-921gs-5hpacd-15s|\ mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-sxt-5nd-r2|\ mikrotik,routerboard-wap-g-5hact2hnd|\ @@ -38,7 +37,6 @@ ath79_setup_macs() case "$board" in mikrotik,routerboard-912uag-2hpnd|\ - mikrotik,routerboard-921gs-5hpacd-15s|\ mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-sxt-5nd-r2|\ mikrotik,routerboard-wap-g-5hact2hnd|\ @@ -46,6 +44,7 @@ ath79_setup_macs() label_mac="$mac_base" lan_mac="$mac_base" ;; + mikrotik,routerboard-921gs-5hpacd-15s|\ mikrotik,routerboard-922uags-5hpacd) label_mac="$mac_base" lan_mac="$mac_base" -- 2.30.2