From 67974231d4354fe26aaa39a3153b5c0945b94858 Mon Sep 17 00:00:00 2001 From: Ion Badulescu Date: Mon, 3 Oct 2005 22:31:36 -0400 Subject: [PATCH] [netdrvr starfire] fix highmem and broken firmware issues Unfortunately, [your patch] might address the crash but doesn't address the real problem. It turns out that the problem is one of padding (the firmware cksum engine works only on 32-bit chunks, yuck), so the special casing for length == 1 wasn't sufficient anyway. This patch addresses the issue, as well the other issue of i386 + CONFIG_HIGHMEM being broken. It is pretty much the same workaround that Adaptec themselves used in their Windows driver. I have yet to check if it fixes the problem when the skb is non-linear, but this patch _will_ solve the problem for 99% of the users out there (those not using sendfile). Signed-off-by: Ion Badulescu Signed-off-by: Jeff Garzik --- drivers/net/starfire.c | 46 ++++++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 22 deletions(-) diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 88b89dc95c77..efdb179ecc8c 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -133,14 +133,18 @@ - finally added firmware (GPL'ed by Adaptec) - removed compatibility code for 2.2.x + LK1.4.2.1 (Ion Badulescu) + - fixed 32/64 bit issues on i386 + CONFIG_HIGHMEM + - added 32-bit padding to outgoing skb's, removed previous workaround + TODO: - fix forced speed/duplexing code (broken a long time ago, when somebody converted the driver to use the generic MII code) - fix VLAN support */ #define DRV_NAME "starfire" -#define DRV_VERSION "1.03+LK1.4.2" -#define DRV_RELDATE "January 19, 2005" +#define DRV_VERSION "1.03+LK1.4.2.1" +#define DRV_RELDATE "October 3, 2005" #include #include @@ -165,6 +169,14 @@ TODO: - fix forced speed/duplexing code (broken a long time ago, when * of length 1. If and when this is fixed, the #define below can be removed. */ #define HAS_BROKEN_FIRMWARE + +/* + * If using the broken firmware, data must be padded to the next 32-bit boundary. + */ +#ifdef HAS_BROKEN_FIRMWARE +#define PADDING_MASK 3 +#endif + /* * Define this if using the driver with the zero-copy patch */ @@ -257,9 +269,10 @@ static int full_duplex[MAX_UNITS] = {0, }; * This SUCKS. * We need a much better method to determine if dma_addr_t is 64-bit. */ -#if (defined(__i386__) && defined(CONFIG_HIGHMEM) && (LINUX_VERSION_CODE > 0x20500 || defined(CONFIG_HIGHMEM64G))) || defined(__x86_64__) || defined (__ia64__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) +#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) /* 64-bit dma_addr_t */ #define ADDR_64BITS /* This chip uses 64 bit addresses. */ +#define netdrv_addr_t u64 #define cpu_to_dma(x) cpu_to_le64(x) #define dma_to_cpu(x) le64_to_cpu(x) #define RX_DESC_Q_ADDR_SIZE RxDescQAddr64bit @@ -268,6 +281,7 @@ static int full_duplex[MAX_UNITS] = {0, }; #define TX_COMPL_Q_ADDR_SIZE TxComplQAddr64bit #define RX_DESC_ADDR_SIZE RxDescAddr64bit #else /* 32-bit dma_addr_t */ +#define netdrv_addr_t u32 #define cpu_to_dma(x) cpu_to_le32(x) #define dma_to_cpu(x) le32_to_cpu(x) #define RX_DESC_Q_ADDR_SIZE RxDescQAddr32bit @@ -1333,21 +1347,10 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) } #if defined(ZEROCOPY) && defined(HAS_BROKEN_FIRMWARE) - { - int has_bad_length = 0; - - if (skb_first_frag_len(skb) == 1) - has_bad_length = 1; - else { - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) - if (skb_shinfo(skb)->frags[i].size == 1) { - has_bad_length = 1; - break; - } - } - - if (has_bad_length) - skb_checksum_help(skb, 0); + if (skb->ip_summed == CHECKSUM_HW) { + skb = skb_padto(skb, (skb->len + PADDING_MASK) & ~PADDING_MASK); + if (skb == NULL) + return NETDEV_TX_OK; } #endif /* ZEROCOPY && HAS_BROKEN_FIRMWARE */ @@ -2127,13 +2130,12 @@ static int __init starfire_init (void) #endif #endif -#ifndef ADDR_64BITS /* we can do this test only at run-time... sigh */ - if (sizeof(dma_addr_t) == sizeof(u64)) { - printk("This driver has not been ported to this 64-bit architecture yet\n"); + if (sizeof(dma_addr_t) != sizeof(netdrv_addr_t)) { + printk("This driver has dma_addr_t issues, please send email to maintainer\n"); return -ENODEV; } -#endif /* not ADDR_64BITS */ + return pci_module_init (&starfire_driver); } -- 2.30.2