From 66eb88edb66d49939bda444ff36ea4bf0aaf9ae1 Mon Sep 17 00:00:00 2001 From: Tobias Schramm Date: Wed, 1 Jan 2020 10:01:48 +0100 Subject: [PATCH] ath79: add support for Ubiquiti EdgeSwitch/ToughSwitch 5XP The Ubiquiti ToughSwitch 5XP is a 5-port PoE Gigabit switch with a single Fast-Ethernet management port. It supports both 24V passive PoE out on all five ports. Flash: 8 MB RAM: 64 MB SoC: AR7242 Switch: ar8327 USB: 1x USB 2.0 Ethernet: 5x GbE, 1x FE Installation of the firmware is possible either via serial + tftpboot or the factory firmware update function via webinterface. By default the single Fast-Ethernet port labeled "MGMT" is configured as the WAN port. Thus access to the device is only possible via the five switch ports. Serial: 3v3 115200 8n1 The serial header is located in the lower left corner of the switches PCB: ``` | | | | o | o RX | o TX | o GND | | ++ +-++-+ ++ ++ + +--+ ++ +--++--++--+ ``` Signed-off-by: Tobias Schramm [remove ubnt,sw compatible - fix spelling - wrap commit message - remove superfluous phy-mode property] Signed-off-by: David Bauer --- .../ath79/dts/ar7242_ubnt_edgeswitch-5xp.dts | 77 +++++++++++++++++++ .../generic/base-files/etc/board.d/02_network | 5 ++ target/linux/ath79/image/generic-ubnt.mk | 6 ++ 3 files changed, 88 insertions(+) create mode 100644 target/linux/ath79/dts/ar7242_ubnt_edgeswitch-5xp.dts diff --git a/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-5xp.dts b/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-5xp.dts new file mode 100644 index 0000000000..f524b2e88e --- /dev/null +++ b/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-5xp.dts @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar7242_ubnt_sw.dtsi" + +/ { + compatible = "ubnt,edgeswitch-5xp", "qca,ar7242"; + model = "Ubiquiti EdgeSwitch 5XP"; + + gpio-export { + compatible = "gpio-export"; + + poe_24v_port1 { + gpio-export,name = "ubnt:24v-poe:port1"; + gpio-export,output = <0>; + gpios = <&gpio_hc595 1 GPIO_ACTIVE_HIGH>; + }; + + poe_24v_port2 { + gpio-export,name = "ubnt:24v-poe:port2"; + gpio-export,output = <0>; + gpios = <&gpio_hc595 3 GPIO_ACTIVE_HIGH>; + }; + + poe_24v_port3 { + gpio-export,name = "ubnt:24v-poe:port3"; + gpio-export,output = <0>; + gpios = <&gpio_hc595 5 GPIO_ACTIVE_HIGH>; + }; + + poe_24v_port4 { + gpio-export,name = "ubnt:24v-poe:port4"; + gpio-export,output = <0>; + gpios = <&gpio_hc595 7 GPIO_ACTIVE_HIGH>; + }; + + poe_24v_port5 { + gpio-export,name = "ubnt:24v-poe:port5"; + gpio-export,output = <0>; + gpios = <&gpio_hc595 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-switch@0 { + compatible = "qca,ar8327"; + reg = <0x0>; + + qca,ar8327-initvals = < + 0x04 0x05100000 /* PORT0 PAD MODE CTRL */ + 0x0c 0x05100000 /* PORT6 PAD MODE CTRL */ + 0x50 0x40004000 /* LED_CTRL0 */ + 0x54 0x40004000 /* LED_CTRL1 */ + 0x58 0x40004000 /* LED_CTRL2 */ + 0x5c 0x03ffff00 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x0000007e /* PORT6_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&phy0>; + phy-mode = "rgmii"; + + mtd-mac-address = <&art 0x0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index ae857b1771..2bf5751a5c 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -259,6 +259,11 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "2:lan:1" "3:lan:3" "4:lan:2" ;; + ubnt,edgeswitch-5xp) + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" + ;; ubnt,edgeswitch-8xp) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index 87e7f5cc32..78364caffe 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -129,6 +129,12 @@ define Device/ubnt_bullet-m-xw endef TARGET_DEVICES += ubnt_bullet-m-xw +define Device/ubnt_edgeswitch-5xp + $(Device/ubnt-sw) + DEVICE_MODEL := EdgeSwitch 5XP +endef +TARGET_DEVICES += ubnt_edgeswitch-5xp + define Device/ubnt_edgeswitch-8xp $(Device/ubnt-sw) DEVICE_MODEL := EdgeSwitch 8XP -- 2.30.2