From 668761ac01d6f5a36b8e5a24d4e154550e2c4c3b Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 12 Apr 2013 10:55:55 +0200 Subject: [PATCH] brcmfmac: define and use platform specific data for SDIO. This patch adds support for platform specific data for SDIO fullmac devices. Currently OOB interrupts are configured by Kconfig BRCMFMAC_SDIO_OOB but that is now determined dynamically by checking availibility of platform data. Cc: Hauke Mehrtens Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/Kconfig | 9 - .../net/wireless/brcm80211/brcmfmac/bcmsdh.c | 155 +++++++++--------- .../brcm80211/brcmfmac/bcmsdh_sdmmc.c | 114 ++++--------- .../wireless/brcm80211/brcmfmac/dhd_sdio.c | 29 ++-- .../wireless/brcm80211/brcmfmac/sdio_host.h | 6 +- include/linux/platform_data/brcmfmac-sdio.h | 124 ++++++++++++++ 6 files changed, 250 insertions(+), 187 deletions(-) create mode 100644 include/linux/platform_data/brcmfmac-sdio.h diff --git a/drivers/net/wireless/brcm80211/Kconfig b/drivers/net/wireless/brcm80211/Kconfig index 747e9317dabd..fc8a0fa6d3b2 100644 --- a/drivers/net/wireless/brcm80211/Kconfig +++ b/drivers/net/wireless/brcm80211/Kconfig @@ -37,15 +37,6 @@ config BRCMFMAC_SDIO IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to use the driver for a SDIO wireless card. -config BRCMFMAC_SDIO_OOB - bool "Out of band interrupt support for SDIO interface chipset" - depends on BRCMFMAC_SDIO - ---help--- - This option enables out-of-band interrupt support for Broadcom - SDIO Wifi chipset using fullmac in order to gain better - performance and deep sleep wake up capability on certain - platforms. Say N if you are unsure. - config BRCMFMAC_USB bool "USB bus interface support for FullMAC driver" depends on USB diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index aa51f370be49..4891e3df2058 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -37,16 +38,15 @@ #define SDIOH_API_ACCESS_RETRY_LIMIT 2 -#ifdef CONFIG_BRCMFMAC_SDIO_OOB -static irqreturn_t brcmf_sdio_irqhandler(int irq, void *dev_id) + +static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id) { struct brcmf_bus *bus_if = dev_get_drvdata(dev_id); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; - brcmf_dbg(INTR, "oob intr triggered\n"); + brcmf_dbg(INTR, "OOB intr triggered\n"); - /* - * out-of-band interrupt is level-triggered which won't + /* out-of-band interrupt is level-triggered which won't * be cleared until dpc */ if (sdiodev->irq_en) { @@ -59,72 +59,12 @@ static irqreturn_t brcmf_sdio_irqhandler(int irq, void *dev_id) return IRQ_HANDLED; } -int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) -{ - int ret = 0; - u8 data; - unsigned long flags; - - brcmf_dbg(SDIO, "Entering: irq %d\n", sdiodev->irq); - - ret = request_irq(sdiodev->irq, brcmf_sdio_irqhandler, - sdiodev->irq_flags, "brcmf_oob_intr", - &sdiodev->func[1]->dev); - if (ret != 0) - return ret; - spin_lock_init(&sdiodev->irq_en_lock); - spin_lock_irqsave(&sdiodev->irq_en_lock, flags); - sdiodev->irq_en = true; - spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags); - - ret = enable_irq_wake(sdiodev->irq); - if (ret != 0) - return ret; - sdiodev->irq_wake = true; - - sdio_claim_host(sdiodev->func[1]); - - /* must configure SDIO_CCCR_IENx to enable irq */ - data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret); - data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1; - brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret); - - /* redirect, configure and enable io for interrupt signal */ - data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE; - if (sdiodev->irq_flags & IRQF_TRIGGER_HIGH) - data |= SDIO_SEPINT_ACT_HI; - brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret); - - sdio_release_host(sdiodev->func[1]); - - return 0; -} - -int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev) -{ - brcmf_dbg(SDIO, "Entering\n"); - - sdio_claim_host(sdiodev->func[1]); - brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL); - brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL); - sdio_release_host(sdiodev->func[1]); - - if (sdiodev->irq_wake) { - disable_irq_wake(sdiodev->irq); - sdiodev->irq_wake = false; - } - free_irq(sdiodev->irq, &sdiodev->func[1]->dev); - sdiodev->irq_en = false; - - return 0; -} -#else /* CONFIG_BRCMFMAC_SDIO_OOB */ -static void brcmf_sdio_irqhandler(struct sdio_func *func) +static void brcmf_sdio_ib_irqhandler(struct sdio_func *func) { struct brcmf_bus *bus_if = dev_get_drvdata(&func->dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; - brcmf_dbg(INTR, "ib intr triggered\n"); + brcmf_dbg(INTR, "IB intr triggered\n"); brcmf_sdbrcm_isr(sdiodev->bus); } @@ -136,12 +76,56 @@ static void brcmf_sdio_dummy_irqhandler(struct sdio_func *func) int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) { - brcmf_dbg(SDIO, "Entering\n"); + int ret = 0; + u8 data; + unsigned long flags; - sdio_claim_host(sdiodev->func[1]); - sdio_claim_irq(sdiodev->func[1], brcmf_sdio_irqhandler); - sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler); - sdio_release_host(sdiodev->func[1]); + if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) { + brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n", + sdiodev->pdata->oob_irq_nr); + ret = request_irq(sdiodev->pdata->oob_irq_nr, + brcmf_sdio_oob_irqhandler, + sdiodev->pdata->oob_irq_flags, + "brcmf_oob_intr", + &sdiodev->func[1]->dev); + if (ret != 0) { + brcmf_err("request_irq failed %d\n", ret); + return ret; + } + sdiodev->oob_irq_requested = true; + spin_lock_init(&sdiodev->irq_en_lock); + spin_lock_irqsave(&sdiodev->irq_en_lock, flags); + sdiodev->irq_en = true; + spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags); + + ret = enable_irq_wake(sdiodev->pdata->oob_irq_nr); + if (ret != 0) { + brcmf_err("enable_irq_wake failed %d\n", ret); + return ret; + } + sdiodev->irq_wake = true; + + sdio_claim_host(sdiodev->func[1]); + + /* must configure SDIO_CCCR_IENx to enable irq */ + data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret); + data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1; + brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret); + + /* redirect, configure and enable io for interrupt signal */ + data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE; + if (sdiodev->pdata->oob_irq_flags & IRQF_TRIGGER_HIGH) + data |= SDIO_SEPINT_ACT_HI; + brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret); + + sdio_release_host(sdiodev->func[1]); + } else { + brcmf_dbg(SDIO, "Entering\n"); + sdio_claim_host(sdiodev->func[1]); + sdio_claim_irq(sdiodev->func[1], brcmf_sdio_ib_irqhandler); + sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler); + sdio_release_host(sdiodev->func[1]); + } return 0; } @@ -150,14 +134,31 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev) { brcmf_dbg(SDIO, "Entering\n"); - sdio_claim_host(sdiodev->func[1]); - sdio_release_irq(sdiodev->func[2]); - sdio_release_irq(sdiodev->func[1]); - sdio_release_host(sdiodev->func[1]); + if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) { + sdio_claim_host(sdiodev->func[1]); + brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL); + brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL); + sdio_release_host(sdiodev->func[1]); + + if (sdiodev->oob_irq_requested) { + sdiodev->oob_irq_requested = false; + if (sdiodev->irq_wake) { + disable_irq_wake(sdiodev->pdata->oob_irq_nr); + sdiodev->irq_wake = false; + } + free_irq(sdiodev->pdata->oob_irq_nr, + &sdiodev->func[1]->dev); + sdiodev->irq_en = false; + } + } else { + sdio_claim_host(sdiodev->func[1]); + sdio_release_irq(sdiodev->func[2]); + sdio_release_irq(sdiodev->func[1]); + sdio_release_host(sdiodev->func[1]); + } return 0; } -#endif /* CONFIG_BRCMFMAC_SDIO_OOB */ int brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index b1ea1036e825..44fa0cdbf97b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -26,6 +26,7 @@ #include /* request_irq() */ #include #include +#include #include #include @@ -62,14 +63,8 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = { }; MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids); -#ifdef CONFIG_BRCMFMAC_SDIO_OOB -static struct list_head oobirq_lh; -struct brcmf_sdio_oobirq { - unsigned int irq; - unsigned long flags; - struct list_head list; -}; -#endif /* CONFIG_BRCMFMAC_SDIO_OOB */ +static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata; + static bool brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev) @@ -428,33 +423,6 @@ void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev) } -#ifdef CONFIG_BRCMFMAC_SDIO_OOB -static int brcmf_sdio_getintrcfg(struct brcmf_sdio_dev *sdiodev) -{ - struct brcmf_sdio_oobirq *oobirq_entry; - - if (list_empty(&oobirq_lh)) { - brcmf_err("no valid oob irq resource\n"); - return -ENXIO; - } - - oobirq_entry = list_first_entry(&oobirq_lh, struct brcmf_sdio_oobirq, - list); - - sdiodev->irq = oobirq_entry->irq; - sdiodev->irq_flags = oobirq_entry->flags; - list_del(&oobirq_entry->list); - kfree(oobirq_entry); - - return 0; -} -#else -static inline int brcmf_sdio_getintrcfg(struct brcmf_sdio_dev *sdiodev) -{ - return 0; -} -#endif /* CONFIG_BRCMFMAC_SDIO_OOB */ - static int brcmf_ops_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id) { @@ -495,15 +463,13 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func, dev_set_drvdata(&func->dev, bus_if); dev_set_drvdata(&sdiodev->func[1]->dev, bus_if); sdiodev->dev = &sdiodev->func[1]->dev; + sdiodev->pdata = brcmfmac_sdio_pdata; atomic_set(&sdiodev->suspend, false); init_waitqueue_head(&sdiodev->request_byte_wait); init_waitqueue_head(&sdiodev->request_word_wait); init_waitqueue_head(&sdiodev->request_chain_wait); init_waitqueue_head(&sdiodev->request_buffer_wait); - err = brcmf_sdio_getintrcfg(sdiodev); - if (err) - goto fail; brcmf_dbg(SDIO, "F2 found, calling brcmf_sdio_probe...\n"); err = brcmf_sdio_probe(sdiodev); @@ -598,7 +564,7 @@ static const struct dev_pm_ops brcmf_sdio_pm_ops = { static struct sdio_driver brcmf_sdmmc_driver = { .probe = brcmf_ops_sdio_probe, .remove = brcmf_ops_sdio_remove, - .name = "brcmfmac", + .name = BRCMFMAC_SDIO_PDATA_NAME, .id_table = brcmf_sdmmc_ids, #ifdef CONFIG_PM_SLEEP .drv = { @@ -607,72 +573,51 @@ static struct sdio_driver brcmf_sdmmc_driver = { #endif /* CONFIG_PM_SLEEP */ }; -#ifdef CONFIG_BRCMFMAC_SDIO_OOB static int brcmf_sdio_pd_probe(struct platform_device *pdev) { - struct resource *res; - struct brcmf_sdio_oobirq *oobirq_entry; - int i, ret; + int ret; - INIT_LIST_HEAD(&oobirq_lh); + brcmf_dbg(SDIO, "Enter\n"); - for (i = 0; ; i++) { - res = platform_get_resource(pdev, IORESOURCE_IRQ, i); - if (!res) - break; + brcmfmac_sdio_pdata = pdev->dev.platform_data; - oobirq_entry = kzalloc(sizeof(struct brcmf_sdio_oobirq), - GFP_KERNEL); - if (!oobirq_entry) - return -ENOMEM; - oobirq_entry->irq = res->start; - oobirq_entry->flags = res->flags & IRQF_TRIGGER_MASK; - list_add_tail(&oobirq_entry->list, &oobirq_lh); - } - if (i == 0) - return -ENXIO; + if (brcmfmac_sdio_pdata->power_on) + brcmfmac_sdio_pdata->power_on(); ret = sdio_register_driver(&brcmf_sdmmc_driver); - if (ret) brcmf_err("sdio_register_driver failed: %d\n", ret); return ret; } -static struct platform_driver brcmf_sdio_pd = { - .probe = brcmf_sdio_pd_probe, - .driver = { - .name = "brcmf_sdio_pd" - } -}; - -void brcmf_sdio_exit(void) +static int brcmf_sdio_pd_remove(struct platform_device *pdev) { brcmf_dbg(SDIO, "Enter\n"); + if (brcmfmac_sdio_pdata->power_off) + brcmfmac_sdio_pdata->power_off(); + sdio_unregister_driver(&brcmf_sdmmc_driver); - platform_driver_unregister(&brcmf_sdio_pd); + return 0; } -void brcmf_sdio_init(void) -{ - int ret; - - brcmf_dbg(SDIO, "Enter\n"); - - ret = platform_driver_register(&brcmf_sdio_pd); +static struct platform_driver brcmf_sdio_pd = { + .remove = brcmf_sdio_pd_remove, + .driver = { + .name = BRCMFMAC_SDIO_PDATA_NAME + } +}; - if (ret) - brcmf_err("platform_driver_register failed: %d\n", ret); -} -#else void brcmf_sdio_exit(void) { brcmf_dbg(SDIO, "Enter\n"); - sdio_unregister_driver(&brcmf_sdmmc_driver); + if (brcmfmac_sdio_pdata) + platform_driver_unregister(&brcmf_sdio_pd); + else + sdio_unregister_driver(&brcmf_sdmmc_driver); } void brcmf_sdio_init(void) @@ -681,9 +626,12 @@ void brcmf_sdio_init(void) brcmf_dbg(SDIO, "Enter\n"); - ret = sdio_register_driver(&brcmf_sdmmc_driver); + ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe); + if (ret == -ENODEV) { + brcmf_dbg(SDIO, "No platform data available, registering without.\n"); + ret = sdio_register_driver(&brcmf_sdmmc_driver); + } if (ret) - brcmf_err("sdio_register_driver failed: %d\n", ret); + brcmf_err("driver registration failed: %d\n", ret); } -#endif /* CONFIG_BRCMFMAC_SDIO_OOB */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index fd697ce3683c..d2487518bd2a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -517,7 +518,7 @@ static int qcount[NUMPRIO]; static int tx_packets[NUMPRIO]; #endif /* DEBUG */ -#define SDIO_DRIVE_STRENGTH 6 /* in milliamps */ +#define DEFAULT_SDIO_DRIVE_STRENGTH 6 /* in milliamps */ #define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL) @@ -2046,23 +2047,19 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) bus->tx_seq = bus->rx_seq = 0; } -#ifdef CONFIG_BRCMFMAC_SDIO_OOB static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus) { unsigned long flags; - spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags); - if (!bus->sdiodev->irq_en && !atomic_read(&bus->ipend)) { - enable_irq(bus->sdiodev->irq); - bus->sdiodev->irq_en = true; + if (bus->sdiodev->oob_irq_requested) { + spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags); + if (!bus->sdiodev->irq_en && !atomic_read(&bus->ipend)) { + enable_irq(bus->sdiodev->pdata->oob_irq_nr); + bus->sdiodev->irq_en = true; + } + spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags); } - spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags); -} -#else -static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus) -{ } -#endif /* CONFIG_BRCMFMAC_SDIO_OOB */ static inline void brcmf_sdbrcm_adddpctsk(struct brcmf_sdio *bus) { @@ -3639,6 +3636,7 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) int err = 0; int reg_addr; u32 reg_val; + u32 drivestrength; bus->alp_only = true; @@ -3679,8 +3677,11 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) goto fail; } - brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci, - SDIO_DRIVE_STRENGTH); + if ((bus->sdiodev->pdata) && (bus->sdiodev->pdata->drive_strength)) + drivestrength = bus->sdiodev->pdata->drive_strength; + else + drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH; + brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength); /* Get info on the SOCRAM cores... */ bus->ramsize = bus->ci->ramsize; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h index 28ed3cc9f35a..7c1b6332747e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h @@ -174,13 +174,11 @@ struct brcmf_sdio_dev { wait_queue_head_t request_buffer_wait; struct device *dev; struct brcmf_bus *bus_if; -#ifdef CONFIG_BRCMFMAC_SDIO_OOB - unsigned int irq; /* oob interrupt number */ - unsigned long irq_flags; /* board specific oob flags */ + struct brcmfmac_sdio_platform_data *pdata; + bool oob_irq_requested; bool irq_en; /* irq enable flags */ spinlock_t irq_en_lock; bool irq_wake; /* irq wake enable flags */ -#endif /* CONFIG_BRCMFMAC_SDIO_OOB */ }; /* Register/deregister interrupt handler. */ diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h new file mode 100644 index 000000000000..1ade657d5fc1 --- /dev/null +++ b/include/linux/platform_data/brcmfmac-sdio.h @@ -0,0 +1,124 @@ +/* + * Copyright (c) 2013 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_BRCMFMAC_PLATFORM_H +#define _LINUX_BRCMFMAC_PLATFORM_H + +/* + * Platform specific driver functions and data. Through the platform specific + * device data functions can be provided to help the brcmfmac driver to + * operate with the device in combination with the used platform. + * + * Use the platform data in the following (similar) way: + * + * +#include + + +static void brcmfmac_power_on(void) +{ +} + +static void brcmfmac_power_off(void) +{ +} + +static void brcmfmac_reset(void) +{ +} + +static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { + .power_on = brcmfmac_power_on, + .power_off = brcmfmac_power_off, + .reset = brcmfmac_reset +}; + +static struct platform_device brcmfmac_device = { + .name = BRCMFMAC_SDIO_PDATA_NAME, + .id = PLATFORM_DEVID_NONE, + .dev.platform_data = &brcmfmac_sdio_pdata +}; + +void __init brcmfmac_init_pdata(void) +{ + brcmfmac_sdio_pdata.oob_irq_supported = true; + brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); + brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHLEVEL; + platform_device_register(&brcmfmac_device); +} + * + * + * Note: the brcmfmac can be loaded as module or be statically built-in into + * the kernel. If built-in then do note that it uses module_init (and + * module_exit) routines which equal device_initcall. So if you intend to + * create a module with the platform specific data for the brcmfmac and have + * it built-in to the kernel then use a higher initcall then device_initcall + * (see init.h). If this is not done then brcmfmac will load without problems + * but will not pickup the platform data. + * + * When the driver does not "detect" platform driver data then it will continue + * without reporting anything and just assume there is no data needed. Which is + * probably true for most platforms. + * + * Explanation of the platform_data fields: + * + * drive_strength: is the preferred drive_strength to be used for the SDIO + * pins. If 0 then a default value will be used. This is the target drive + * strength, the exact drive strength which will be used depends on the + * capabilities of the device. + * + * oob_irq_supported: does the board have support for OOB interrupts. SDIO + * in-band interrupts are relatively slow and for having less overhead on + * interrupt processing an out of band interrupt can be used. If the HW + * supports this then enable this by setting this field to true and configure + * the oob related fields. + * + * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are + * used for registering the irq using request_irq function. + * + * power_on: This function is called by the brcmfmac when the module gets + * loaded. This can be particularly useful for low power devices. The platform + * spcific routine may for example decide to power up the complete device. + * If there is no use-case for this function then provide NULL. + * + * power_off: This function is called by the brcmfmac when the module gets + * unloaded. At this point the device can be powered down or otherwise be reset. + * So if an actual power_off is not supported but reset is then reset the device + * when this function gets called. This can be particularly useful for low power + * devices. If there is no use-case for this function (either power-down or + * reset) then provide NULL. + * + * reset: This function can get called if the device communication broke down. + * This functionality is particularly useful in case of SDIO type devices. It is + * possible to reset a dongle via sdio data interface, but it requires that + * this is fully functional. This function is chip/module specific and this + * function should return only after the complete reset has completed. + */ + +#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" + +struct brcmfmac_sdio_platform_data { + unsigned int drive_strength; + bool oob_irq_supported; + unsigned int oob_irq_nr; + unsigned long oob_irq_flags; + void (*power_on)(void); + void (*power_off)(void); + void (*reset)(void); +}; + +#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ -- 2.30.2