From 65d9a715fc891740a900052be625f60da3a2b6a3 Mon Sep 17 00:00:00 2001 From: Guillaume Lefebvre Date: Wed, 9 Nov 2022 06:52:18 +0100 Subject: [PATCH] ipq40xx: D-Link DAP-2610: convert to DSA Reenable D-Link DAP-2610, convert it to DSA and label port to 'lan', as shown on the case Reviewed-by: Robert Marko Signed-off-by: Guillaume Lefebvre --- .../ipq40xx/base-files/etc/board.d/02_network | 1 + .../arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts | 14 ++++++++++++++ target/linux/ipq40xx/image/generic.mk | 3 +-- 3 files changed, 16 insertions(+), 2 deletions(-) diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 16b0f05a5b..80b7b02e8a 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -43,6 +43,7 @@ ipq40xx_setup_interfaces() ;; aruba,ap-303|\ avm,fritzrepeater-1200|\ + dlink,dap-2610|\ meraki,mr33|\ meraki,mr74|\ mikrotik,lhgg-60ad|\ diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts index ff8053c42b..724047c469 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts @@ -181,6 +181,20 @@ status = "okay"; }; +&gmac { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + +&swport5 { + status = "okay"; + + label = "lan"; +}; + &tlmm { serial_pins: serial_pinmux { mux { diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index b50d072bec..9fb34a7871 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -419,8 +419,7 @@ define Device/dlink_dap-2610 IMAGE/factory.bin := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata endef -# Missing DSA Setup -#TARGET_DEVICES += dlink_dap-2610 +TARGET_DEVICES += dlink_dap-2610 define Device/edgecore_ecw5211 $(call Device/FitImage) -- 2.30.2