From 64e22ebe49780e2454c8788c5af9f1e0e500e1a2 Mon Sep 17 00:00:00 2001 From: Elen Song Date: Mon, 22 Jul 2013 16:30:24 +0800 Subject: [PATCH] serial: at91: correct definition from DMA to PDC The DMA is available since at91sam9x5 socs, before that, we use PDC. Signed-off-by: Elen Song Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 71 ++++++++++++++++--------------- 1 file changed, 36 insertions(+), 35 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 5c17f8dac91b..1d59563016fb 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -139,11 +139,11 @@ struct atmel_uart_port { u32 backup_imr; /* IMR saved during suspend */ int break_active; /* break being received */ - short use_dma_rx; /* enable PDC receiver */ + bool use_pdc_rx; /* enable PDC receiver */ short pdc_rx_idx; /* current PDC RX buffer */ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */ - short use_dma_tx; /* enable PDC transmitter */ + bool use_pdc_tx; /* enable PDC transmitter */ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */ struct tasklet_struct tasklet; @@ -180,26 +180,26 @@ to_atmel_uart_port(struct uart_port *uart) } #ifdef CONFIG_SERIAL_ATMEL_PDC -static bool atmel_use_dma_rx(struct uart_port *port) +static bool atmel_use_pdc_rx(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - return atmel_port->use_dma_rx; + return atmel_port->use_pdc_rx; } -static bool atmel_use_dma_tx(struct uart_port *port) +static bool atmel_use_pdc_tx(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - return atmel_port->use_dma_tx; + return atmel_port->use_pdc_tx; } #else -static bool atmel_use_dma_rx(struct uart_port *port) +static bool atmel_use_pdc_rx(struct uart_port *port) { return false; } -static bool atmel_use_dma_tx(struct uart_port *port) +static bool atmel_use_pdc_tx(struct uart_port *port) { return false; } @@ -232,7 +232,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); - if (atmel_use_dma_tx(port)) + if (atmel_use_pdc_tx(port)) atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE; else @@ -344,7 +344,7 @@ static void atmel_stop_tx(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_use_dma_tx(port)) { + if (atmel_use_pdc_tx(port)) { /* disable PDC transmit */ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); } @@ -363,7 +363,7 @@ static void atmel_start_tx(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_use_dma_tx(port)) { + if (atmel_use_pdc_tx(port)) { if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN) /* The transmitter is already running. Yes, we really need this.*/ @@ -389,7 +389,7 @@ static void atmel_start_rx(struct uart_port *port) UART_PUT_CR(port, ATMEL_US_RXEN); - if (atmel_use_dma_rx(port)) { + if (atmel_use_pdc_rx(port)) { /* enable PDC controller */ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | port->read_status_mask); @@ -406,7 +406,7 @@ static void atmel_stop_rx(struct uart_port *port) { UART_PUT_CR(port, ATMEL_US_RXDIS); - if (atmel_use_dma_rx(port)) { + if (atmel_use_pdc_rx(port)) { /* disable PDC receive */ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | @@ -571,7 +571,7 @@ atmel_handle_receive(struct uart_port *port, unsigned int pending) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_use_dma_rx(port)) { + if (atmel_use_pdc_rx(port)) { /* * PDC receive. Just schedule the tasklet and let it * figure out the details. @@ -660,7 +660,7 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id) /* * Called from tasklet with ENDTX and TXBUFE interrupts disabled. */ -static void atmel_tx_dma(struct uart_port *port) +static void atmel_tx_pdc(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); struct circ_buf *xmit = &port->state->xmit; @@ -777,7 +777,7 @@ static void atmel_rx_from_ring(struct uart_port *port) spin_lock(&port->lock); } -static void atmel_rx_from_dma(struct uart_port *port) +static void atmel_rx_from_pdc(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); struct tty_port *tport = &port->state->port; @@ -867,8 +867,8 @@ static void atmel_tasklet_func(unsigned long data) /* The interrupt handler does not take the lock */ spin_lock(&port->lock); - if (atmel_use_dma_tx(port)) - atmel_tx_dma(port); + if (atmel_use_pdc_tx(port)) + atmel_tx_pdc(port); else atmel_tx_chars(port); @@ -892,8 +892,8 @@ static void atmel_tasklet_func(unsigned long data) atmel_port->irq_status_prev = status; } - if (atmel_use_dma_rx(port)) - atmel_rx_from_dma(port); + if (atmel_use_pdc_rx(port)) + atmel_rx_from_pdc(port); else atmel_rx_from_ring(port); @@ -929,7 +929,7 @@ static int atmel_startup(struct uart_port *port) /* * Initialize DMA (if necessary) */ - if (atmel_use_dma_rx(port)) { + if (atmel_use_pdc_rx(port)) { int i; for (i = 0; i < 2; i++) { @@ -963,7 +963,7 @@ static int atmel_startup(struct uart_port *port) UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr); UART_PUT_RNCR(port, PDC_BUFFER_SIZE); } - if (atmel_use_dma_tx(port)) { + if (atmel_use_pdc_tx(port)) { struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; struct circ_buf *xmit = &port->state->xmit; @@ -999,7 +999,7 @@ static int atmel_startup(struct uart_port *port) /* enable xmit & rcvr */ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); - if (atmel_use_dma_rx(port)) { + if (atmel_use_pdc_rx(port)) { /* set UART timeout */ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); UART_PUT_CR(port, ATMEL_US_STTTO); @@ -1030,7 +1030,7 @@ static void atmel_shutdown(struct uart_port *port) /* * Shut-down the DMA. */ - if (atmel_use_dma_rx(port)) { + if (atmel_use_pdc_rx(port)) { int i; for (i = 0; i < 2; i++) { @@ -1043,7 +1043,7 @@ static void atmel_shutdown(struct uart_port *port) kfree(pdc->buf); } } - if (atmel_use_dma_tx(port)) { + if (atmel_use_pdc_tx(port)) { struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; dma_unmap_single(port->dev, @@ -1079,7 +1079,7 @@ static void atmel_flush_buffer(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_use_dma_tx(port)) { + if (atmel_use_pdc_tx(port)) { UART_PUT_TCR(port, 0); atmel_port->pdc_tx.ofs = 0; } @@ -1192,7 +1192,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, if (termios->c_iflag & (BRKINT | PARMRK)) port->read_status_mask |= ATMEL_US_RXBRK; - if (atmel_use_dma_rx(port)) + if (atmel_use_pdc_rx(port)) /* need to enable error interrupts */ UART_PUT_IER(port, port->read_status_mask); @@ -1429,13 +1429,14 @@ static void atmel_of_init_port(struct atmel_uart_port *atmel_port, /* DMA/PDC usage specification */ if (of_get_property(np, "atmel,use-dma-rx", NULL)) - atmel_port->use_dma_rx = 1; + atmel_port->use_pdc_rx = true; else - atmel_port->use_dma_rx = 0; + atmel_port->use_pdc_rx = false; + if (of_get_property(np, "atmel,use-dma-tx", NULL)) - atmel_port->use_dma_tx = 1; + atmel_port->use_pdc_tx = true; else - atmel_port->use_dma_tx = 0; + atmel_port->use_pdc_tx = false; /* rs485 properties */ if (of_property_read_u32_array(np, "rs485-rts-delay", @@ -1467,8 +1468,8 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, if (pdev->dev.of_node) { atmel_of_init_port(atmel_port, pdev->dev.of_node); } else { - atmel_port->use_dma_rx = pdata->use_dma_rx; - atmel_port->use_dma_tx = pdata->use_dma_tx; + atmel_port->use_pdc_rx = pdata->use_dma_rx; + atmel_port->use_pdc_tx = pdata->use_dma_tx; atmel_port->rs485 = pdata->rs485; } @@ -1515,7 +1516,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */ if (atmel_port->rs485.flags & SER_RS485_ENABLED) atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - else if (atmel_use_dma_tx(port)) { + else if (atmel_use_pdc_tx(port)) { port->fifosize = PDC_BUFFER_SIZE; atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE; } else { @@ -1807,7 +1808,7 @@ static int atmel_serial_probe(struct platform_device *pdev) if (ret) goto err; - if (!atmel_use_dma_rx(&port->uart)) { + if (!atmel_use_pdc_rx(&port->uart)) { ret = -ENOMEM; data = kmalloc(sizeof(struct atmel_uart_char) * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL); -- 2.30.2