From 64d2307c3b7daa03dbc0c3a6b514709dd7b6eaee Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 23 Sep 2013 01:08:25 -0300 Subject: [PATCH] ASoC: fsl: fsl_ssi: Fix simultaneous capture and playback When doing simultaneous capture and playback on a mx6 board we get the following error: $ arecord -f cd | aplay -f cd imx-sgtl5000 sound.13: set sample size in capture stream first fsl-ssi-dai 2028000.ssi: ASoC: can't open interface 2028000.ssi: -11 ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_ open) unable to open slave aplay: main:660: audio open error: Device or resource busy Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo The 'arecord -f cd | aplay -f cd' always trigger cause the 'if (!first_runtime->sample_bits)' block to be true which returns an error. Adjust the logic inside fsl_ssi_startup(), so that we do not always hit the error when playing 'arecord | aplay' line for the first time. Reported-by: Chris Clepper Suggested-by: Nicolin Chen Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_ssi.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 6ac87300d45d..cdbb641ef518 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -469,19 +469,12 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, * parameters, then the second stream may be * constrained to the wrong sample rate or size. */ - if (!first_runtime->sample_bits) { - dev_err(substream->pcm->card->dev, - "set sample size in %s stream first\n", - substream->stream == - SNDRV_PCM_STREAM_PLAYBACK - ? "capture" : "playback"); - return -EAGAIN; - } - - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_SAMPLE_BITS, + if (first_runtime->sample_bits) { + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_SAMPLE_BITS, first_runtime->sample_bits, first_runtime->sample_bits); + } } ssi_private->second_stream = substream; -- 2.30.2