From 64c204c5862426e806008dbff762d9404660355f Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Mon, 22 May 2023 18:12:08 +0200 Subject: [PATCH] ipq806x: 6.1: refresh kernel patches Refresh ipq806x kernel patches with make target/linux/refresh. Signed-off-by: Christian Marangi --- ...0060-ARM-mach-qcom-fix-support-for-ipq806x.patch | 11 ++--------- ...neric-Mangle-bootloader-s-kernel-arguments.patch | 6 +++--- ...-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch | 10 ++-------- ...-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch | 2 +- ...om-fix-wrong-nad_pins-definition-for-ipq80.patch | 2 +- ...om-add-MDIO-dedicated-controller-node-for-.patch | 8 ++++---- ...om-tsens-init-debugfs-only-with-successful.patch | 4 ++-- ...-qcom-tsens-simplify-debugfs-init-function.patch | 4 ++-- ...om-Add-L2-Krait-Cache-devfreq-scaling-driv.patch | 10 +++++----- ...om-add-krait-cache-compatible-for-ipq806x-.patch | 6 +++--- ...-devfreq-add-ipq806x-fabric-scaling-driver.patch | 6 +++--- ...-dts-qcom-add-fab-scaling-node-for-ipq806x.patch | 4 ++-- ...-qcom-kpss-xcc-register-it-as-clk-provider.patch | 11 +++-------- ...rait-cc-use-devm-variant-for-clk-notifier-.patch | 7 +------ ...m-krait-cc-handle-qsb-clock-defined-in-DTS.patch | 13 ++++--------- ...com-krait-cc-register-REAL-qsb-fixed-clock.patch | 7 +------ ...com-krait-cc-drop-pr_info-and-use-dev_info.patch | 9 ++------- ...rait-cc-rework-mux-reset-logic-and-reset-h.patch | 12 ++++-------- ...m-gcc-ipq806x-remove-cc_register_board-for.patch | 2 +- ...com-ipq8064-disable-mmc-ddr-1_8v-for-sdcc1.patch | 2 +- .../patches-6.1/850-soc-add-qualcomm-syscon.patch | 12 ++++++------ .../patches-6.1/900-arm-add-cmdline-override.patch | 4 ++-- 22 files changed, 55 insertions(+), 97 deletions(-) diff --git a/target/linux/ipq806x/patches-6.1/0060-ARM-mach-qcom-fix-support-for-ipq806x.patch b/target/linux/ipq806x/patches-6.1/0060-ARM-mach-qcom-fix-support-for-ipq806x.patch index 41c102e30a..384eee6215 100644 --- a/target/linux/ipq806x/patches-6.1/0060-ARM-mach-qcom-fix-support-for-ipq806x.patch +++ b/target/linux/ipq806x/patches-6.1/0060-ARM-mach-qcom-fix-support-for-ipq806x.patch @@ -19,11 +19,9 @@ Signed-off-by: Christian Marangi arch/arm/mach-qcom/Kconfig | 13 +++++++++++++ 2 files changed, 15 insertions(+), 1 deletion(-) -diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig -index 1af63e17b4ad..0818d35973ad 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -282,6 +282,7 @@ config PHYS_OFFSET +@@ -283,6 +283,7 @@ config PHYS_OFFSET default 0x30000000 if ARCH_S3C24XX default 0xa0000000 if ARCH_IOP32X || ARCH_PXA default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100 @@ -31,7 +29,7 @@ index 1af63e17b4ad..0818d35973ad 100644 default 0 help Please provide the physical address corresponding to the -@@ -1701,7 +1702,7 @@ config CRASH_DUMP +@@ -1702,7 +1703,7 @@ config CRASH_DUMP config AUTO_ZRELADDR bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM @@ -40,8 +38,6 @@ index 1af63e17b4ad..0818d35973ad 100644 help ZRELADDR is the physical address where the decompressed kernel image will be placed. If AUTO_ZRELADDR is selected, the address -diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig -index 12a812e61c16..b11b6e391ff0 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -46,4 +46,17 @@ config ARCH_MDM9615 @@ -62,6 +58,3 @@ index 12a812e61c16..b11b6e391ff0 100644 + disable AUTO_ZRELADDR. + endif --- -2.37.2 - diff --git a/target/linux/ipq806x/patches-6.1/0067-generic-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/ipq806x/patches-6.1/0067-generic-Mangle-bootloader-s-kernel-arguments.patch index 7d68192295..e40b43b968 100644 --- a/target/linux/ipq806x/patches-6.1/0067-generic-Mangle-bootloader-s-kernel-arguments.patch +++ b/target/linux/ipq806x/patches-6.1/0067-generic-Mangle-bootloader-s-kernel-arguments.patch @@ -22,7 +22,7 @@ Signed-off-by: Adrian Panella --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -1727,6 +1727,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN +@@ -1586,6 +1586,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN The command-line arguments provided by the boot loader will be appended to the the device tree bootargs property. @@ -248,7 +248,7 @@ Signed-off-by: Adrian Panella } --- a/init/main.c +++ b/init/main.c -@@ -113,6 +113,10 @@ +@@ -114,6 +114,10 @@ #include @@ -259,7 +259,7 @@ Signed-off-by: Adrian Panella static int kernel_init(void *); extern void init_IRQ(void); -@@ -992,6 +996,18 @@ asmlinkage __visible void __init __no_sa +@@ -994,6 +998,18 @@ asmlinkage __visible void __init __no_sa pr_notice("Kernel command line: %s\n", saved_command_line); /* parameters may set static keys */ jump_label_init(); diff --git a/target/linux/ipq806x/patches-6.1/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch b/target/linux/ipq806x/patches-6.1/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch index 0417572be0..0a594b2688 100644 --- a/target/linux/ipq806x/patches-6.1/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch +++ b/target/linux/ipq806x/patches-6.1/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch @@ -29,7 +29,7 @@ Tested-by: Jonathan McDowell cxo_board: cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; -@@ -490,6 +490,17 @@ +@@ -575,15 +581,30 @@ clocks = <&gcc PLL8_VOTE>, <&pxo_board>; clock-names = "pll8_vote", "pxo"; clock-output-names = "acpu_l2_aux"; @@ -47,8 +47,6 @@ Tested-by: Jonathan McDowell }; acc0: clock-controller@2088000 { -@@ -503,17 +509,25 @@ - acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu0_aux"; @@ -63,7 +61,7 @@ Tested-by: Jonathan McDowell reg = <0x02089000 0x1000>, <0x02009000 0x1000>; regulator; }; - +@@ -591,14 +612,24 @@ acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; @@ -73,10 +71,6 @@ Tested-by: Jonathan McDowell + #clock-cells = <0>; }; - saw1: regulator@2099000 { -@@ -531,11 +545,17 @@ - }; - saw1: regulator@2099000 { - compatible = "qcom,saw2"; + compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; diff --git a/target/linux/ipq806x/patches-6.1/107-13-ARM-dts-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch b/target/linux/ipq806x/patches-6.1/107-13-ARM-dts-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch index f3c8f18f1d..16e924b303 100644 --- a/target/linux/ipq806x/patches-6.1/107-13-ARM-dts-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch +++ b/target/linux/ipq806x/patches-6.1/107-13-ARM-dts-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch @@ -127,7 +127,7 @@ Tested-by: Jonathan McDowell + }; + thermal-zones { - tsens_tz_sensor0 { + sensor0-thermal { polling-delay-passive = <0>; --- a/arch/arm/boot/dts/qcom-ipq8065.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi diff --git a/target/linux/ipq806x/patches-6.1/108-01-ARM-dts-qcom-fix-wrong-nad_pins-definition-for-ipq80.patch b/target/linux/ipq806x/patches-6.1/108-01-ARM-dts-qcom-fix-wrong-nad_pins-definition-for-ipq80.patch index d3f821a6a0..6be9334e7d 100644 --- a/target/linux/ipq806x/patches-6.1/108-01-ARM-dts-qcom-fix-wrong-nad_pins-definition-for-ipq80.patch +++ b/target/linux/ipq806x/patches-6.1/108-01-ARM-dts-qcom-fix-wrong-nad_pins-definition-for-ipq80.patch @@ -12,7 +12,7 @@ Signed-off-by: Christian 'Ansuel' Marangi --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -559,12 +559,9 @@ +@@ -599,12 +599,9 @@ }; nand_pins: nand_pins { diff --git a/target/linux/ipq806x/patches-6.1/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch b/target/linux/ipq806x/patches-6.1/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch index 4a57fc0330..a35bb3874f 100644 --- a/target/linux/ipq806x/patches-6.1/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch +++ b/target/linux/ipq806x/patches-6.1/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch @@ -15,7 +15,7 @@ Signed-off-by: Christian 'Ansuel' Marangi --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts -@@ -24,73 +24,6 @@ +@@ -25,73 +25,6 @@ device_type = "memory"; }; @@ -89,7 +89,7 @@ Signed-off-by: Christian 'Ansuel' Marangi mdio1: mdio-1 { status = "okay"; compatible = "virtual,mdio-gpio"; -@@ -220,6 +153,73 @@ +@@ -222,6 +155,73 @@ status = "okay"; }; @@ -165,8 +165,8 @@ Signed-off-by: Christian 'Ansuel' Marangi --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -1446,6 +1446,20 @@ - }; +@@ -476,6 +476,20 @@ + snps,blen = <16 0 0 0 0 0 0>; }; + mdio0: mdio@37000000 { diff --git a/target/linux/ipq806x/patches-6.1/110-01-thermal-qcom-tsens-init-debugfs-only-with-successful.patch b/target/linux/ipq806x/patches-6.1/110-01-thermal-qcom-tsens-init-debugfs-only-with-successful.patch index 4caa2a9560..c9b20a0222 100644 --- a/target/linux/ipq806x/patches-6.1/110-01-thermal-qcom-tsens-init-debugfs-only-with-successful.patch +++ b/target/linux/ipq806x/patches-6.1/110-01-thermal-qcom-tsens-init-debugfs-only-with-successful.patch @@ -16,7 +16,7 @@ Acked-by: Thara Gopinath --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c -@@ -917,8 +917,6 @@ int __init init_common(struct tsens_priv +@@ -918,8 +918,6 @@ int __init init_common(struct tsens_priv if (tsens_version(priv) >= VER_0_1) tsens_enable_irq(priv); @@ -25,7 +25,7 @@ Acked-by: Thara Gopinath err_put_device: put_device(&op->dev); return ret; -@@ -1163,7 +1161,12 @@ static int tsens_probe(struct platform_d +@@ -1156,7 +1154,12 @@ static int tsens_probe(struct platform_d } } diff --git a/target/linux/ipq806x/patches-6.1/110-02-thermal-qcom-tsens-simplify-debugfs-init-function.patch b/target/linux/ipq806x/patches-6.1/110-02-thermal-qcom-tsens-simplify-debugfs-init-function.patch index add2ab4598..0fbc4bd8ca 100644 --- a/target/linux/ipq806x/patches-6.1/110-02-thermal-qcom-tsens-simplify-debugfs-init-function.patch +++ b/target/linux/ipq806x/patches-6.1/110-02-thermal-qcom-tsens-simplify-debugfs-init-function.patch @@ -17,7 +17,7 @@ Reviewed-by: Thara Gopinath --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c -@@ -691,7 +691,7 @@ static int dbg_version_show(struct seq_f +@@ -692,7 +692,7 @@ static int dbg_version_show(struct seq_f return ret; seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver); } else { @@ -26,7 +26,7 @@ Reviewed-by: Thara Gopinath } return 0; -@@ -703,21 +703,17 @@ DEFINE_SHOW_ATTRIBUTE(dbg_sensors); +@@ -704,21 +704,17 @@ DEFINE_SHOW_ATTRIBUTE(dbg_sensors); static void tsens_debug_init(struct platform_device *pdev) { struct tsens_priv *priv = platform_get_drvdata(pdev); diff --git a/target/linux/ipq806x/patches-6.1/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch b/target/linux/ipq806x/patches-6.1/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch index af90393e2d..9de7328879 100644 --- a/target/linux/ipq806x/patches-6.1/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch +++ b/target/linux/ipq806x/patches-6.1/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch @@ -21,9 +21,9 @@ Signed-off-by: Christian Marangi --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig -@@ -132,6 +132,17 @@ config ARM_RK3399_DMC_DEVFREQ - It sets the frequency for the memory controller and reads the usage counts - from hardware. +@@ -151,6 +151,17 @@ config ARM_SUN8I_A33_MBUS_DEVFREQ + This adds the DEVFREQ driver for the MBUS controller in some + Allwinner sun8i (A33 through H3) and sun50i (A64 and H5) SoCs. +config ARM_KRAIT_CACHE_DEVFREQ + tristate "Scaling support for Krait CPU Cache Devfreq" @@ -41,9 +41,9 @@ Signed-off-by: Christian Marangi endif # PM_DEVFREQ --- a/drivers/devfreq/Makefile +++ b/drivers/devfreq/Makefile -@@ -13,6 +13,7 @@ obj-$(CONFIG_ARM_IMX_BUS_DEVFREQ) += imx - obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ) += imx8m-ddrc.o +@@ -15,6 +15,7 @@ obj-$(CONFIG_ARM_MEDIATEK_CCI_DEVFREQ) + obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o + obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o +obj-$(CONFIG_ARM_KRAIT_CACHE_DEVFREQ) += krait-cache-devfreq.o diff --git a/target/linux/ipq806x/patches-6.1/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch b/target/linux/ipq806x/patches-6.1/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch index f42729fd50..3a6c281793 100644 --- a/target/linux/ipq806x/patches-6.1/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch +++ b/target/linux/ipq806x/patches-6.1/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch @@ -31,9 +31,9 @@ Signed-off-by: Christian Marangi }; opp_table_l2: opp_table_l2 { -@@ -470,6 +460,16 @@ - ranges; - compatible = "simple-bus"; +@@ -1410,6 +1400,16 @@ + #reset-cells = <1>; + }; + L2: l2-cache { + compatible = "cache", "qcom,krait-cache"; diff --git a/target/linux/ipq806x/patches-6.1/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch b/target/linux/ipq806x/patches-6.1/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch index 340c58a0c1..c9cd3ebdf7 100644 --- a/target/linux/ipq806x/patches-6.1/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch +++ b/target/linux/ipq806x/patches-6.1/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch @@ -15,7 +15,7 @@ Signed-off-by: Christian Marangi --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig -@@ -143,6 +143,17 @@ config ARM_KRAIT_CACHE_DEVFREQ +@@ -162,6 +162,17 @@ config ARM_KRAIT_CACHE_DEVFREQ based on the max frequency across all core and the range set in the device dts. If provided this scale also the regulator attached to the l2 cache. @@ -35,8 +35,8 @@ Signed-off-by: Christian Marangi endif # PM_DEVFREQ --- a/drivers/devfreq/Makefile +++ b/drivers/devfreq/Makefile -@@ -14,6 +14,7 @@ obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ) += - obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o +@@ -16,6 +16,7 @@ obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += + obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o obj-$(CONFIG_ARM_KRAIT_CACHE_DEVFREQ) += krait-cache-devfreq.o +obj-$(CONFIG_ARM_IPQ806X_FAB_DEVFREQ) += ipq806x-fab-devfreq.o diff --git a/target/linux/ipq806x/patches-6.1/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch b/target/linux/ipq806x/patches-6.1/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch index f4de1dbb52..a324b6facf 100644 --- a/target/linux/ipq806x/patches-6.1/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch +++ b/target/linux/ipq806x/patches-6.1/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch @@ -30,9 +30,9 @@ Signed-off-by: Christian Marangi + }; + thermal-zones { - tsens_tz_sensor0 { + sensor0-thermal { polling-delay-passive = <0>; -@@ -470,6 +482,13 @@ +@@ -1410,6 +1422,13 @@ operating-points-v2 = <&opp_table_l2>; }; diff --git a/target/linux/ipq806x/patches-6.1/120-v6.2-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch b/target/linux/ipq806x/patches-6.1/120-v6.2-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch index 41201544f6..9395f1b241 100644 --- a/target/linux/ipq806x/patches-6.1/120-v6.2-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch +++ b/target/linux/ipq806x/patches-6.1/120-v6.2-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch @@ -13,11 +13,9 @@ Link: https://lore.kernel.org/r/20221108211734.3707-1-ansuelsmth@gmail.com drivers/clk/qcom/kpss-xcc.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) -diff --git a/drivers/clk/qcom/kpss-xcc.c b/drivers/clk/qcom/kpss-xcc.c -index b1b370274ec4..97358c98c6c9 100644 --- a/drivers/clk/qcom/kpss-xcc.c +++ b/drivers/clk/qcom/kpss-xcc.c -@@ -31,12 +31,13 @@ MODULE_DEVICE_TABLE(of, kpss_xcc_match_table); +@@ -31,12 +31,13 @@ MODULE_DEVICE_TABLE(of, kpss_xcc_match_t static int kpss_xcc_driver_probe(struct platform_device *pdev) { @@ -32,7 +30,7 @@ index b1b370274ec4..97358c98c6c9 100644 if (!id) return -ENODEV; -@@ -45,7 +46,7 @@ static int kpss_xcc_driver_probe(struct platform_device *pdev) +@@ -45,7 +46,7 @@ static int kpss_xcc_driver_probe(struct return PTR_ERR(base); if (id->data) { @@ -41,7 +39,7 @@ index b1b370274ec4..97358c98c6c9 100644 "clock-output-names", 0, &name)) return -ENODEV; -@@ -55,12 +56,16 @@ static int kpss_xcc_driver_probe(struct platform_device *pdev) +@@ -55,12 +56,16 @@ static int kpss_xcc_driver_probe(struct base += 0x28; } @@ -60,6 +58,3 @@ index b1b370274ec4..97358c98c6c9 100644 } static struct platform_driver kpss_xcc_driver = { --- -2.37.2 - diff --git a/target/linux/ipq806x/patches-6.1/121-v6.2-01-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch b/target/linux/ipq806x/patches-6.1/121-v6.2-01-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch index d3d1ea17f5..65c1fc17f2 100644 --- a/target/linux/ipq806x/patches-6.1/121-v6.2-01-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch +++ b/target/linux/ipq806x/patches-6.1/121-v6.2-01-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch @@ -14,11 +14,9 @@ Link: https://lore.kernel.org/r/20221108215827.30475-1-ansuelsmth@gmail.com drivers/clk/qcom/krait-cc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c -index e91275663973..33a78b7de0bd 100644 --- a/drivers/clk/qcom/krait-cc.c +++ b/drivers/clk/qcom/krait-cc.c -@@ -64,7 +64,7 @@ static int krait_notifier_register(struct device *dev, struct clk *clk, +@@ -62,7 +62,7 @@ static int krait_notifier_register(struc int ret = 0; mux->clk_nb.notifier_call = krait_notifier_cb; @@ -27,6 +25,3 @@ index e91275663973..33a78b7de0bd 100644 if (ret) dev_err(dev, "failed to register clock notifier: %d\n", ret); --- -2.37.2 - diff --git a/target/linux/ipq806x/patches-6.1/122-01-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch b/target/linux/ipq806x/patches-6.1/122-01-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch index a8bf748258..c30c245d0a 100644 --- a/target/linux/ipq806x/patches-6.1/122-01-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch +++ b/target/linux/ipq806x/patches-6.1/122-01-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch @@ -12,20 +12,18 @@ Signed-off-by: Christian Marangi drivers/clk/qcom/krait-cc.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) -diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c -index 84f0048961f5..f1d64b16cac3 100644 --- a/drivers/clk/qcom/krait-cc.c +++ b/drivers/clk/qcom/krait-cc.c -@@ -305,7 +305,7 @@ static int krait_cc_probe(struct platform_device *pdev) +@@ -348,7 +348,7 @@ static int krait_cc_probe(struct platfor { struct device *dev = &pdev->dev; const struct of_device_id *id; - unsigned long cur_rate, aux_rate; + unsigned long cur_rate, aux_rate, qsb_rate; int cpu; - struct clk *clk; - struct clk **clks; -@@ -315,11 +315,19 @@ static int krait_cc_probe(struct platform_device *pdev) + struct clk_hw *mux, *l2_pri_mux; + struct clk *clk, **clks; +@@ -357,11 +357,19 @@ static int krait_cc_probe(struct platfor if (!id) return -ENODEV; @@ -47,6 +45,3 @@ index 84f0048961f5..f1d64b16cac3 100644 if (!id->data) { clk = clk_register_fixed_factor(dev, "acpu_aux", "gpll0_vote", 0, 1, 2); --- -2.37.2 - diff --git a/target/linux/ipq806x/patches-6.1/122-02-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch b/target/linux/ipq806x/patches-6.1/122-02-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch index da082759cf..e2f78f79fb 100644 --- a/target/linux/ipq806x/patches-6.1/122-02-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch +++ b/target/linux/ipq806x/patches-6.1/122-02-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch @@ -14,8 +14,6 @@ Signed-off-by: Christian Marangi drivers/clk/qcom/krait-cc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) -diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c -index f1d64b16cac3..e91275663973 100644 --- a/drivers/clk/qcom/krait-cc.c +++ b/drivers/clk/qcom/krait-cc.c @@ -25,6 +25,8 @@ enum { @@ -27,7 +25,7 @@ index f1d64b16cac3..e91275663973 100644 static unsigned int sec_mux_map[] = { 2, 0, -@@ -322,7 +324,7 @@ static int krait_cc_probe(struct platform_device *pdev) +@@ -364,7 +366,7 @@ static int krait_cc_probe(struct platfor */ clk = clk_get(dev, "qsb"); if (IS_ERR(clk)) @@ -36,6 +34,3 @@ index f1d64b16cac3..e91275663973 100644 if (IS_ERR(clk)) return PTR_ERR(clk); --- -2.37.2 - diff --git a/target/linux/ipq806x/patches-6.1/122-03-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch b/target/linux/ipq806x/patches-6.1/122-03-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch index e25627d86f..d95a63fc44 100644 --- a/target/linux/ipq806x/patches-6.1/122-03-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch +++ b/target/linux/ipq806x/patches-6.1/122-03-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch @@ -10,12 +10,10 @@ Signed-off-by: Christian Marangi drivers/clk/qcom/krait-cc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) -diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c -index b71067a49ee7..e4fb3ff2b5b5 100644 --- a/drivers/clk/qcom/krait-cc.c +++ b/drivers/clk/qcom/krait-cc.c -@@ -391,25 +391,25 @@ static int krait_cc_probe(struct platform_device *pdev) - cur_rate = clk_get_rate(l2_pri_mux_clk); +@@ -423,25 +423,25 @@ static int krait_cc_probe(struct platfor + cur_rate = clk_get_rate(clks[l2_mux]); aux_rate = 384000000; if (cur_rate < aux_rate) { - pr_info("L2 @ Undefined rate. Forcing new rate.\n"); @@ -44,6 +42,3 @@ index b71067a49ee7..e4fb3ff2b5b5 100644 } of_clk_add_provider(dev->of_node, krait_of_get, clks); --- -2.37.2 - diff --git a/target/linux/ipq806x/patches-6.1/122-04-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch b/target/linux/ipq806x/patches-6.1/122-04-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch index 7a19c965c2..8f88e06991 100644 --- a/target/linux/ipq806x/patches-6.1/122-04-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch +++ b/target/linux/ipq806x/patches-6.1/122-04-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch @@ -17,8 +17,6 @@ Signed-off-by: Christian Marangi drivers/clk/qcom/krait-cc.c | 50 +++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 27 deletions(-) -diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c -index 717eff44b6a4..90dee71e7c38 100644 --- a/drivers/clk/qcom/krait-cc.c +++ b/drivers/clk/qcom/krait-cc.c @@ -25,7 +25,9 @@ enum { @@ -32,16 +30,16 @@ index 717eff44b6a4..90dee71e7c38 100644 static unsigned int sec_mux_map[] = { 2, -@@ -317,7 +319,7 @@ static int krait_cc_probe(struct platform_device *pdev) +@@ -350,7 +352,7 @@ static int krait_cc_probe(struct platfor { struct device *dev = &pdev->dev; const struct of_device_id *id; - unsigned long cur_rate, aux_rate, qsb_rate; + unsigned long cur_rate, qsb_rate; int cpu; - struct clk *clk; - struct clk **clks; -@@ -397,28 +399,29 @@ static int krait_cc_probe(struct platform_device *pdev) + struct clk_hw *mux, *l2_pri_mux; + struct clk *clk, **clks; +@@ -420,28 +422,29 @@ static int krait_cc_probe(struct platfor * two different rates to force a HFPLL reinit under all * circumstances. */ @@ -88,5 +86,3 @@ index 717eff44b6a4..90dee71e7c38 100644 } of_clk_add_provider(dev->of_node, krait_of_get, clks); - - diff --git a/target/linux/ipq806x/patches-6.1/123-clk-qcom-gcc-ipq806x-remove-cc_register_board-for.patch b/target/linux/ipq806x/patches-6.1/123-clk-qcom-gcc-ipq806x-remove-cc_register_board-for.patch index 20e7440ace..0df29a0787 100644 --- a/target/linux/ipq806x/patches-6.1/123-clk-qcom-gcc-ipq806x-remove-cc_register_board-for.patch +++ b/target/linux/ipq806x/patches-6.1/123-clk-qcom-gcc-ipq806x-remove-cc_register_board-for.patch @@ -14,7 +14,7 @@ Signed-off-by: Christian Marangi --- a/drivers/clk/qcom/gcc-ipq806x.c +++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -3384,14 +3384,6 @@ static int gcc_ipq806x_probe(struct plat +@@ -3386,14 +3386,6 @@ static int gcc_ipq806x_probe(struct plat struct regmap *regmap; int ret; diff --git a/target/linux/ipq806x/patches-6.1/131-6.2-ARM-dts-qcom-ipq8064-disable-mmc-ddr-1_8v-for-sdcc1.patch b/target/linux/ipq806x/patches-6.1/131-6.2-ARM-dts-qcom-ipq8064-disable-mmc-ddr-1_8v-for-sdcc1.patch index 8493f380fe..e542421085 100644 --- a/target/linux/ipq806x/patches-6.1/131-6.2-ARM-dts-qcom-ipq8064-disable-mmc-ddr-1_8v-for-sdcc1.patch +++ b/target/linux/ipq806x/patches-6.1/131-6.2-ARM-dts-qcom-ipq8064-disable-mmc-ddr-1_8v-for-sdcc1.patch @@ -18,7 +18,7 @@ Link: https://lore.kernel.org/r/20221024233817.27410-1-ansuelsmth@gmail.com --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -1529,7 +1529,6 @@ +@@ -932,7 +932,6 @@ non-removable; cap-sd-highspeed; cap-mmc-highspeed; diff --git a/target/linux/ipq806x/patches-6.1/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq806x/patches-6.1/850-soc-add-qualcomm-syscon.patch index ec9027ae47..397c4481ab 100644 --- a/target/linux/ipq806x/patches-6.1/850-soc-add-qualcomm-syscon.patch +++ b/target/linux/ipq806x/patches-6.1/850-soc-add-qualcomm-syscon.patch @@ -2,9 +2,9 @@ From: Christian Lamparter Subject: SoC: add qualcomm syscon --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o - obj-$(CONFIG_QCOM_SMSM) += smsm.o - obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o +@@ -23,6 +23,7 @@ obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o + obj-$(CONFIG_QCOM_SPM) += spm.o + obj-$(CONFIG_QCOM_STATS) += qcom_stats.o obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o +obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o obj-$(CONFIG_QCOM_APR) += apr.o @@ -12,9 +12,9 @@ Subject: SoC: add qualcomm syscon obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig -@@ -190,6 +190,13 @@ config QCOM_SOCINFO - Say yes here to support the Qualcomm socinfo driver, providing - information about the SoC to user space. +@@ -213,6 +213,13 @@ config QCOM_STATS + various SoC level low power modes statistics and export to debugfs + interface. +config QCOM_TCSR + tristate "QCOM Top Control and Status Registers" diff --git a/target/linux/ipq806x/patches-6.1/900-arm-add-cmdline-override.patch b/target/linux/ipq806x/patches-6.1/900-arm-add-cmdline-override.patch index 09022dca46..6361cfcbd9 100644 --- a/target/linux/ipq806x/patches-6.1/900-arm-add-cmdline-override.patch +++ b/target/linux/ipq806x/patches-6.1/900-arm-add-cmdline-override.patch @@ -1,6 +1,6 @@ --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -1740,6 +1740,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGL +@@ -1599,6 +1599,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGL endchoice @@ -17,7 +17,7 @@ default "" --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c -@@ -1162,6 +1162,17 @@ int __init early_init_dt_scan_chosen(uns +@@ -1187,6 +1187,17 @@ int __init early_init_dt_scan_chosen(cha if (p != NULL && l > 0) strlcat(cmdline, p, min_t(int, strlen(cmdline) + (int)l, COMMAND_LINE_SIZE)); -- 2.30.2