From 64ba52d3a1339ad35e643b6cc36e3f8e1cf14caa Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 8 Feb 2009 09:41:49 +0000 Subject: [PATCH] mac80211: update compat-wireless to 2009-02-07 SVN-Revision: 14434 --- package/mac80211/Makefile | 4 +- .../patches/210-remove_unused_stuff.patch | 8 +- ...rt2x00-Implement-support-for-802.11n.patch | 73 +++-- ...2x00-Implement-support-for-rt2800pci.patch | 256 ++++++++------- ...2x00-Implement-support-for-rt2800usb.patch | 291 ++++++++++-------- .../mac80211/patches/320-rx_dma_unmap.patch | 37 --- ...1-ath9k-dont-register-leds-on-ar9100.patch | 6 +- .../patches/402-ath9k-enable-debug.patch | 2 +- 8 files changed, 342 insertions(+), 335 deletions(-) delete mode 100644 package/mac80211/patches/320-rx_dma_unmap.patch diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile index 0de84a01beb8..3a5ceca24c0d 100644 --- a/package/mac80211/Makefile +++ b/package/mac80211/Makefile @@ -12,11 +12,11 @@ PKG_NAME:=mac80211 PKG_RELEASE:=1 ifneq ($(CONFIG_LINUX_2_6_27)$(CONFIG_LINUX_2_6_28),) - PKG_VERSION:=2009-02-02 + PKG_VERSION:=2009-02-07 PKG_SOURCE_URL:= \ http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/02 \ http://wireless.kernel.org/download/compat-wireless-2.6 - PKG_MD5SUM:=310b08184b16ead8cab3714bf5a57728 + PKG_MD5SUM:=fed21ffa78c91e0f8067b8ca63a442b7 else PKG_VERSION:=2008-08-06 PKG_SOURCE_URL:=http://www.orbit-lab.org/kernel/compat-wireless-2.6/2008/08 diff --git a/package/mac80211/patches/210-remove_unused_stuff.patch b/package/mac80211/patches/210-remove_unused_stuff.patch index 18c171fbf189..f4d675127ccb 100644 --- a/package/mac80211/patches/210-remove_unused_stuff.patch +++ b/package/mac80211/patches/210-remove_unused_stuff.patch @@ -1,6 +1,6 @@ --- a/config.mk +++ b/config.mk -@@ -75,10 +75,10 @@ CONFIG_MAC80211_MESH=y +@@ -78,10 +78,10 @@ CONFIG_MAC80211_MESH=y CONFIG_CFG80211=m # CONFIG_CFG80211_REG_DEBUG is not set @@ -15,7 +15,7 @@ CONFIG_NL80211=y -@@ -118,16 +118,16 @@ CONFIG_IWL3945_LEDS=y +@@ -121,16 +121,16 @@ CONFIG_IWL3945_LEDS=y CONFIG_B43=m CONFIG_B43_PCI_AUTOSELECT=y CONFIG_B43_PCICORE_AUTOSELECT=y @@ -35,7 +35,7 @@ # CONFIG_B43LEGACY_RFKILL=y # CONFIG_B43LEGACY_DEBUG=y CONFIG_B43LEGACY_DMA=y -@@ -137,17 +137,17 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +@@ -140,17 +140,17 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y # CONFIG_B43LEGACY_PIO_MODE is not set # The Intel ipws @@ -61,7 +61,7 @@ # CONFIG_IPW2200_DEBUG is not set # The above enables use a second interface prefixed 'rtap'. # Example usage: -@@ -269,15 +269,15 @@ CONFIG_SSB_SPROM=y +@@ -272,15 +272,15 @@ CONFIG_SSB_SPROM=y ifneq ($(CONFIG_USB),) ifneq ($(CONFIG_LIBERTAS_THINFIRM_USB),m) CONFIG_LIBERTAS_USB=m diff --git a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch index c3c07a09cb30..503ae805ceac 100644 --- a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch +++ b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch @@ -1,6 +1,6 @@ -From adf33d3a207846709e2a5fb006f17dbc9225f7a9 Mon Sep 17 00:00:00 2001 +From 2c0af6ef6263ad5b581429953ad1b98e6d522e69 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn -Date: Fri, 23 Jan 2009 17:10:06 +0100 +Date: Wed, 4 Feb 2009 20:10:23 +0100 Subject: [PATCH] rt2x00: Implement support for 802.11n Extend rt2x00lib capabilities to support 802.11n, @@ -11,14 +11,14 @@ Signed-off-by: Ivo van Doorn --- drivers/net/wireless/rt2x00/Kconfig | 3 + drivers/net/wireless/rt2x00/Makefile | 1 + - drivers/net/wireless/rt2x00/rt2x00.h | 5 ++ + drivers/net/wireless/rt2x00/rt2x00.h | 4 + drivers/net/wireless/rt2x00/rt2x00config.c | 5 ++ drivers/net/wireless/rt2x00/rt2x00dev.c | 91 ++++++++++++++++++++------- drivers/net/wireless/rt2x00/rt2x00ht.c | 69 +++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00lib.h | 24 +++++++ drivers/net/wireless/rt2x00/rt2x00queue.c | 1 + - drivers/net/wireless/rt2x00/rt2x00queue.h | 26 +++++++- - 9 files changed, 197 insertions(+), 28 deletions(-) + drivers/net/wireless/rt2x00/rt2x00queue.h | 33 ++++++++-- + 9 files changed, 201 insertions(+), 30 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2x00ht.c --- a/drivers/net/wireless/rt2x00/Makefile @@ -33,15 +33,7 @@ Signed-off-by: Ivo van Doorn obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -108,6 +108,7 @@ - */ - #define ACK_SIZE 14 - #define IEEE80211_HEADER 24 -+#define AGGREGATION_SIZE 3840 - #define PLCP 48 - #define BEACON 100 - #define PREAMBLE 144 -@@ -357,6 +358,7 @@ static inline struct rt2x00_intf* vif_to +@@ -357,6 +357,7 @@ static inline struct rt2x00_intf* vif_to * for @tx_power_a, @tx_power_bg and @channels. * @channels: Device/chipset specific channel values (See &struct rf_channel). * @channels_info: Additional information for channels (See &struct channel_info). @@ -49,7 +41,7 @@ Signed-off-by: Ivo van Doorn */ struct hw_mode_spec { unsigned int supported_bands; -@@ -370,6 +372,8 @@ struct hw_mode_spec { +@@ -370,6 +371,8 @@ struct hw_mode_spec { unsigned int num_channels; const struct rf_channel *channels; const struct channel_info *channels_info; @@ -58,7 +50,7 @@ Signed-off-by: Ivo van Doorn }; /* -@@ -603,6 +607,7 @@ enum rt2x00_flags { +@@ -606,6 +609,7 @@ enum rt2x00_flags { CONFIG_EXTERNAL_LNA_BG, CONFIG_DOUBLE_ANTENNA, CONFIG_DISABLE_LINK_TUNING, @@ -82,7 +74,7 @@ Signed-off-by: Ivo van Doorn sizeof(libconf.rf)); --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c -@@ -315,18 +315,54 @@ void rt2x00lib_txdone(struct queue_entry +@@ -316,18 +316,54 @@ void rt2x00lib_txdone(struct queue_entry } EXPORT_SYMBOL_GPL(rt2x00lib_txdone); @@ -141,7 +133,7 @@ Signed-off-by: Ivo van Doorn /* * Allocate a new sk_buffer. If no new buffer available, drop the -@@ -375,26 +411,17 @@ void rt2x00lib_rxdone(struct rt2x00_dev +@@ -376,26 +412,17 @@ void rt2x00lib_rxdone(struct rt2x00_dev skb_trim(entry->skb, rxdesc.size); /* @@ -179,7 +171,7 @@ Signed-off-by: Ivo van Doorn } /* -@@ -404,7 +431,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev +@@ -405,7 +432,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev rt2x00debug_update_crypto(rt2x00dev, &rxdesc); rx_status->mactime = rxdesc.timestamp; @@ -188,7 +180,7 @@ Signed-off-by: Ivo van Doorn rx_status->qual = rt2x00link_calculate_signal(rt2x00dev, rxdesc.rssi); rx_status->signal = rxdesc.rssi; rx_status->noise = rxdesc.noise; -@@ -439,72 +466,84 @@ const struct rt2x00_rate rt2x00_supporte +@@ -440,72 +467,84 @@ const struct rt2x00_rate rt2x00_supporte .bitrate = 10, .ratemask = BIT(0), .plcp = 0x00, @@ -273,7 +265,7 @@ Signed-off-by: Ivo van Doorn }, }; -@@ -580,6 +619,8 @@ static int rt2x00lib_probe_hw_modes(stru +@@ -581,6 +620,8 @@ static int rt2x00lib_probe_hw_modes(stru rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates; hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &rt2x00dev->bands[IEEE80211_BAND_2GHZ]; @@ -282,7 +274,7 @@ Signed-off-by: Ivo van Doorn } /* -@@ -596,6 +637,8 @@ static int rt2x00lib_probe_hw_modes(stru +@@ -597,6 +638,8 @@ static int rt2x00lib_probe_hw_modes(stru rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4]; hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &rt2x00dev->bands[IEEE80211_BAND_5GHZ]; @@ -338,7 +330,7 @@ Signed-off-by: Ivo van Doorn + else + txdesc->mpdu_density = 0; + -+ txdesc->ba_size = 0; /* FIXME: What value is needed? */ ++ txdesc->ba_size = 7; /* FIXME: What value is needed? */ + txdesc->stbc = 0; /* FIXME: What value is needed? */ + + txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs); @@ -388,7 +380,7 @@ Signed-off-by: Ivo van Doorn /* * Radio control handlers. */ -@@ -330,6 +339,21 @@ static inline void rt2x00crypto_rx_inser +@@ -341,6 +350,21 @@ static inline void rt2x00crypto_rx_inser #endif /* CONFIG_RT2X00_LIB_CRYPTO */ /* @@ -422,7 +414,22 @@ Signed-off-by: Ivo van Doorn } --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h -@@ -145,6 +145,7 @@ static inline struct skb_frame_desc* get +@@ -35,9 +35,12 @@ + * for USB devices this restriction does not apply, but the value of + * 2432 makes sense since it is big enough to contain the maximum fragment + * size according to the ieee802.11 specs. ++ * The aggregation size depends on support from the driver, but should ++ * be something around 3840 bytes. + */ +-#define DATA_FRAME_SIZE 2432 +-#define MGMT_FRAME_SIZE 256 ++#define DATA_FRAME_SIZE 2432 ++#define MGMT_FRAME_SIZE 256 ++#define AGGREGATION_SIZE 3840 + + /** + * DOC: Number of entries per queue +@@ -145,6 +148,7 @@ static inline struct skb_frame_desc* get * * @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value. * @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value. @@ -430,7 +437,7 @@ Signed-off-by: Ivo van Doorn * @RXDONE_MY_BSS: Does this frame originate from device's BSS. * @RXDONE_CRYPTO_IV: Driver provided IV/EIV data. * @RXDONE_CRYPTO_ICV: Driver provided ICV data. -@@ -152,9 +153,10 @@ static inline struct skb_frame_desc* get +@@ -152,9 +156,10 @@ static inline struct skb_frame_desc* get enum rxdone_entry_desc_flags { RXDONE_SIGNAL_PLCP = 1 << 0, RXDONE_SIGNAL_BITRATE = 1 << 1, @@ -444,7 +451,7 @@ Signed-off-by: Ivo van Doorn }; /** -@@ -163,7 +165,7 @@ enum rxdone_entry_desc_flags { +@@ -163,7 +168,7 @@ enum rxdone_entry_desc_flags { * from &rxdone_entry_desc to a signal value type. */ #define RXDONE_SIGNAL_MASK \ @@ -453,7 +460,7 @@ Signed-off-by: Ivo van Doorn /** * struct rxdone_entry_desc: RX Entry descriptor -@@ -177,6 +179,7 @@ enum rxdone_entry_desc_flags { +@@ -177,6 +182,7 @@ enum rxdone_entry_desc_flags { * @size: Data size of the received frame. * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags). * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags). @@ -461,7 +468,7 @@ Signed-off-by: Ivo van Doorn * @cipher: Cipher type used during decryption. * @cipher_status: Decryption status. * @iv: IV/EIV data used during decryption. -@@ -190,6 +193,7 @@ struct rxdone_entry_desc { +@@ -190,6 +196,7 @@ struct rxdone_entry_desc { int size; int flags; int dev_flags; @@ -469,7 +476,7 @@ Signed-off-by: Ivo van Doorn u8 cipher; u8 cipher_status; -@@ -243,6 +247,9 @@ struct txdone_entry_desc { +@@ -243,6 +250,9 @@ struct txdone_entry_desc { * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared). * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware. * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware. @@ -479,7 +486,7 @@ Signed-off-by: Ivo van Doorn */ enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, -@@ -258,6 +265,9 @@ enum txentry_desc_flags { +@@ -258,6 +268,9 @@ enum txentry_desc_flags { ENTRY_TXD_ENCRYPT_PAIRWISE, ENTRY_TXD_ENCRYPT_IV, ENTRY_TXD_ENCRYPT_MMIC, @@ -489,7 +496,7 @@ Signed-off-by: Ivo van Doorn }; /** -@@ -271,7 +281,11 @@ enum txentry_desc_flags { +@@ -271,7 +284,11 @@ enum txentry_desc_flags { * @length_low: PLCP length low word. * @signal: PLCP signal. * @service: PLCP service. @@ -501,7 +508,7 @@ Signed-off-by: Ivo van Doorn * @retry_limit: Max number of retries. * @aifs: AIFS value. * @ifs: IFS value. -@@ -291,7 +305,11 @@ struct txentry_desc { +@@ -291,7 +308,11 @@ struct txentry_desc { u16 signal; u16 service; diff --git a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch index a37362ce669e..e22b0763a101 100644 --- a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch +++ b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch @@ -1,6 +1,6 @@ -From 659988a6bb83536c5d0a01b0b58378cc1856c975 Mon Sep 17 00:00:00 2001 +From f2219a0f2f2f61656d2c3a524836f6f1e646ea33 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn -Date: Fri, 23 Jan 2009 17:13:03 +0100 +Date: Wed, 4 Feb 2009 20:43:00 +0100 Subject: [PATCH] rt2x00: Implement support for rt2800pci Add support for the rt2800pci chipset. @@ -14,10 +14,10 @@ Signed-off-by: Ivo van Doorn --- drivers/net/wireless/rt2x00/Kconfig | 15 + drivers/net/wireless/rt2x00/Makefile | 1 + - drivers/net/wireless/rt2x00/rt2800pci.c | 2763 +++++++++++++++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2800pci.h | 1881 +++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800pci.c | 2785 +++++++++++++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800pci.h | 1877 +++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00.h | 4 + - 5 files changed, 4664 insertions(+), 0 deletions(-) + 5 files changed, 4682 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h @@ -32,7 +32,7 @@ Signed-off-by: Ivo van Doorn obj-$(CONFIG_RT73USB) += rt73usb.o --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -0,0 +1,2763 @@ +@@ -0,0 +1,2785 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + @@ -364,20 +364,40 @@ Signed-off-by: Ivo van Doorn + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ ++ struct mac_wcid_entry wcid_entry; ++ struct mac_iveiv_entry iveiv_entry; + u32 offset; + u32 reg; + + offset = MAC_WCID_ATTR_ENTRY(crypto->aid); + -+ reg = 0; ++ rt2x00pci_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, + !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_PAIRKEY_MODE, -+ crypto->cipher); ++ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, -+ (crypto->cmd == SET_KEY) ? crypto->bssidx : 0); ++ (crypto->cmd == SET_KEY) * crypto->bssidx); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0); + rt2x00pci_register_write(rt2x00dev, offset, reg); ++ ++ offset = MAC_IVEIV_ENTRY(crypto->aid); ++ ++ memset(&iveiv_entry, 0, sizeof(iveiv_entry)); ++ if ((crypto->cipher == CIPHER_TKIP) || ++ (crypto->cipher == CIPHER_TKIP_NO_MIC) || ++ (crypto->cipher == CIPHER_AES)) ++ iveiv_entry.iv[3] |= 0x20; ++ iveiv_entry.iv[3] |= key->keyidx << 6; ++ rt2x00pci_register_multiwrite(rt2x00dev, offset, ++ &iveiv_entry, sizeof(iveiv_entry)); ++ ++ offset = MAC_WCID_ENTRY(crypto->aid); ++ ++ memset(&wcid_entry, 0, sizeof(wcid_entry)); ++ if (crypto->cmd == SET_KEY) ++ memcpy(&wcid_entry, crypto->address, ETH_ALEN); ++ rt2x00pci_register_multiwrite(rt2x00dev, offset, ++ &wcid_entry, sizeof(wcid_entry)); +} + +static int rt2800pci_config_shared_key(struct rt2x00_dev *rt2x00dev, @@ -387,10 +407,11 @@ Signed-off-by: Ivo van Doorn + struct hw_key_entry key_entry; + struct rt2x00_field32 field; + u32 offset; -+ u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { ++ key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; ++ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, @@ -401,34 +422,22 @@ Signed-off-by: Ivo van Doorn + offset = SHARED_KEY_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, offset, + &key_entry, sizeof(key_entry)); -+ -+ /* -+ * The driver does not support the IV/EIV generation -+ * in hardware. However it doesn't support the IV/EIV -+ * inside the ieee80211 frame either, but requires it -+ * to be provided seperately for the descriptor. -+ * rt2x00lib will cut the IV/EIV data out of all frames -+ * given to us by mac80211, but we must tell mac80211 -+ * to generate the IV/EIV data. -+ */ -+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * The cipher types are stored over multiple registers + * starting with SHARED_KEY_MODE_BASE each word will have -+ * 32 bits and contains the cipher types for 2 modes each. ++ * 32 bits and contains the cipher types for 2 bssidx each. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ -+ mask = key->hw_key_idx % 8; -+ field.bit_offset = (3 * mask); ++ field.bit_offset = (4 * key->keyidx); + field.bit_mask = 0x7 << field.bit_offset; + + offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); + rt2x00pci_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, -+ (crypto->cmd == SET_KEY) ? crypto->cipher : 0); ++ (crypto->cmd == SET_KEY) * crypto->cipher); + rt2x00pci_register_write(rt2x00dev, offset, reg); + + /* @@ -446,13 +455,13 @@ Signed-off-by: Ivo van Doorn + struct hw_key_entry key_entry; + u32 offset; + -+ /* -+ * 1 pairwise key is possible per AID, this means that the AID -+ * equals our hw_key_idx. -+ */ -+ key->hw_key_idx = crypto->aid; -+ + if (crypto->cmd == SET_KEY) { ++ /* ++ * 1 pairwise key is possible per AID, this means that the AID ++ * equals our hw_key_idx. ++ */ ++ key->hw_key_idx = crypto->aid; ++ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, @@ -463,17 +472,6 @@ Signed-off-by: Ivo van Doorn + offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, offset, + &key_entry, sizeof(key_entry)); -+ -+ /* -+ * The driver does not support the IV/EIV generation -+ * in hardware. However it doesn't support the IV/EIV -+ * inside the ieee80211 frame either, but requires it -+ * to be provided seperately for the descriptor. -+ * rt2x00lib will cut the IV/EIV data out of all frames -+ * given to us by mac80211, but we must tell mac80211 -+ * to generate the IV/EIV data. -+ */ -+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* @@ -521,7 +519,7 @@ Signed-off-by: Ivo van Doorn + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 1); ++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, + !(filter_flags & FIF_CONTROL)); + rt2x00pci_register_write(rt2x00dev, RX_FILTER_CFG, reg); @@ -582,7 +580,7 @@ Signed-off-by: Ivo van Doorn + + rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, -+ erp->ack_timeout); ++ DIV_ROUND_UP(erp->ack_timeout, erp->slot_time)); + rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); + + rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, ®); @@ -599,8 +597,7 @@ Signed-off-by: Ivo van Doorn + + rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE, + erp->basic_rates); -+ rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, -+ erp->basic_rates >> 32); ++ rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + + rt2x00pci_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); @@ -980,12 +977,6 @@ Signed-off-by: Ivo van Doorn + */ + rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, ®); + qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); -+ -+ /* -+ * Update False CCA count from register. -+ */ -+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT1, ®); -+ qual->false_cca = rt2x00_get_field32(reg, RX_STA_CNT1_FALSE_CCA); +} + +static u8 rt2800pci_get_default_vgc(struct rt2x00_dev *rt2x00dev) @@ -1038,19 +1029,31 @@ Signed-off-by: Ivo van Doorn + return FIRMWARE_RT2860; +} + -+static u16 rt2800pci_get_firmware_crc(const void *data, const size_t len) ++static int rt2800pci_check_firmware(struct rt2x00_dev *rt2x00dev, ++ const u8 *data, const size_t len) +{ ++ u16 fw_crc; + u16 crc; + + /* ++ * Only support 8kb firmware files. ++ */ ++ if (len != 8192) ++ return FW_BAD_LENGTH; ++ ++ /* ++ * The last 2 bytes in the firmware array are the crc checksum itself, ++ * this means that we should never pass those 2 bytes to the crc ++ * algorithm. ++ */ ++ fw_crc = (data[len - 2] << 8 | data[len - 1]); ++ ++ /* + * Use the crc ccitt algorithm. + * This will return the same value as the legacy driver which + * used bit ordering reversion on the both the firmware bytes + * before input input as well as on the final output. + * Obviously using crc ccitt directly is much more efficient. -+ * The last 2 bytes in the firmware array are the crc checksum itself, -+ * this means that we should never pass those 2 bytes to the crc -+ * algorithm. + */ + crc = crc_ccitt(~0, data, len - 2); + @@ -1060,20 +1063,17 @@ Signed-off-by: Ivo van Doorn + * will be swapped, use swab16 to convert the crc to the correct + * value. + */ -+ return swab16(crc); ++ crc = swab16(crc); ++ ++ return (fw_crc == crc) ? FW_OK : FW_BAD_CRC; +} + +static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev, -+ const void *data, const size_t len) ++ const u8 *data, const size_t len) +{ + unsigned int i; + u32 reg; + -+ if (len != 8192) { -+ ERROR(rt2x00dev, "Invalid firmware file length (len=%zu)\n", len); -+ return -ENOENT; -+ } -+ + /* + * Wait for stable hardware. + */ @@ -1201,26 +1201,31 @@ Signed-off-by: Ivo van Doorn + rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma); + rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit); + rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX0, 0); ++ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX0, 0); + + entry_priv = rt2x00dev->tx[1].entries[0].priv_data; + rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma); + rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit); + rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX1, 0); ++ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX1, 0); + + entry_priv = rt2x00dev->tx[2].entries[0].priv_data; + rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma); + rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit); + rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX2, 0); ++ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX2, 0); + + entry_priv = rt2x00dev->tx[3].entries[0].priv_data; + rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma); + rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit); + rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX3, 0); ++ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX3, 0); + + entry_priv = rt2x00dev->rx->entries[0].priv_data; + rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma); + rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit); + rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, 0); ++ rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0); + + /* + * Enable global DMA configuration @@ -1291,7 +1296,7 @@ Signed-off-by: Ivo van Doorn + rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); + rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); + -+ rt2x00pci_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06); ++ rt2x00pci_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); + rt2x00pci_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); + + rt2x00pci_register_read(rt2x00dev, TX_LINK_CFG, ®); @@ -1332,25 +1337,25 @@ Signed-off-by: Ivo van Doorn + rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + + rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®); -+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 3); ++ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); -+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 0); ++ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg); + + rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 3); ++ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 0); ++ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg); @@ -1470,12 +1475,12 @@ Signed-off-by: Ivo van Doorn + rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG0, ®); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 10); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 11); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 12); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 13); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 14); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 15); ++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 3); ++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); ++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); ++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); ++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); ++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); + rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG0, reg); + + rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG1, ®); @@ -1820,7 +1825,6 @@ Signed-off-by: Ivo van Doorn + */ + rt2x00_desc_read(txwi, 0, &word); + rt2x00_set_field32(&word, TXWI_W0_FRAG, -+ test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags) || + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0); + rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); @@ -1957,6 +1961,24 @@ Signed-off-by: Ivo van Doorn + rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx); +} + ++static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, ++ const enum data_queue_qid qid) ++{ ++ u32 reg; ++ ++ if (qid == QID_BEACON) { ++ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, 0); ++ return; ++ } ++ ++ rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®); ++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE)); ++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK)); ++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI)); ++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO)); ++ rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg); ++} ++ +/* + * RX control handlers + */ @@ -2032,8 +2054,7 @@ Signed-off-by: Ivo van Doorn + + rxdesc->rssi = + (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) + -+ rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1) + -+ rt2x00_get_field32(rxwi2, RXWI_W2_RSSI2)) / 3; ++ rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2; + + rxdesc->noise = + (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) + @@ -2179,7 +2200,7 @@ Signed-off-by: Ivo van Doorn + eeprom.data = rt2x00dev; + eeprom.register_read = rt2800pci_eepromregister_read; + eeprom.register_write = rt2800pci_eepromregister_write; -+ eeprom.width = rt2x00_get_field32(reg, E2PROM_CSR_TYPE_93C46) ? ++ eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ? + PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; + eeprom.reg_data_in = 0; + eeprom.reg_data_out = 0; @@ -2692,7 +2713,7 @@ Signed-off-by: Ivo van Doorn + .irq_handler = rt2800pci_interrupt, + .probe_hw = rt2800pci_probe_hw, + .get_firmware_name = rt2800pci_get_firmware_name, -+ .get_firmware_crc = rt2800pci_get_firmware_crc, ++ .check_firmware = rt2800pci_check_firmware, + .load_firmware = rt2800pci_load_firmware, + .initialize = rt2x00pci_initialize, + .uninitialize = rt2x00pci_uninitialize, @@ -2707,6 +2728,7 @@ Signed-off-by: Ivo van Doorn + .write_tx_data = rt2x00pci_write_tx_data, + .write_beacon = rt2800pci_write_beacon, + .kick_tx_queue = rt2800pci_kick_tx_queue, ++ .kill_tx_queue = rt2800pci_kill_tx_queue, + .fill_rxdone = rt2800pci_fill_rxdone, + .config_shared_key = rt2800pci_config_shared_key, + .config_pairwise_key = rt2800pci_config_pairwise_key, @@ -2798,7 +2820,7 @@ Signed-off-by: Ivo van Doorn +module_exit(rt2800pci_exit); --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800pci.h -@@ -0,0 +1,1881 @@ +@@ -0,0 +1,1877 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + @@ -2890,7 +2912,7 @@ Signed-off-by: Ivo van Doorn +/* + * E2PROM_CSR: EEPROM control register. + * RELOAD: Write 1 to reload eeprom content. -+ * TYPE_93C46: 1: 93c46, 0:93c66. ++ * TYPE: 0: 93c46, 1:93c66. + * LOAD_STATUS: 1:loading, 0:done. + */ +#define E2PROM_CSR 0x0004 @@ -2898,7 +2920,7 @@ Signed-off-by: Ivo van Doorn +#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002) +#define E2PROM_CSR_DATA_IN FIELD32(0x00000004) +#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008) -+#define E2PROM_CSR_TYPE_93C46 FIELD32(0x00000020) ++#define E2PROM_CSR_TYPE FIELD32(0x00000030) +#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) +#define E2PROM_CSR_RELOAD FIELD32(0x00000080) + @@ -4088,64 +4110,60 @@ Signed-off-by: Ivo van Doorn +#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000) + +/* -+ * Security key table memory, base address = 0x1800 -+ */ -+struct hw_pairwise_ta_entry { -+ u8 address[6]; -+ u8 reserved[2]; -+} __attribute__ ((packed)); -+ -+struct wcid_entry { -+ u8 rx_ba_bitmat7; -+ u8 rx_ba_bitmat0; -+ u8 mac[6]; -+} __attribute__ ((packed)); -+ -+struct hw_key_entry { -+ u8 key[16]; -+ u8 tx_mic[8]; -+ u8 rx_mic[8]; -+} __attribute__ ((packed)); -+ -+/* + * Security key table memory. + * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry + * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry -+ * PAIRWISE_IVEIV_TABLE_BASE: 8-byte * 256-entry + * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry + * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry + * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry -+ * SHARED_KEY_MODE_BASE: 32-byte * 16-entry ++ * SHARED_KEY_MODE_BASE: 4-byte * 16-entry + */ +#define MAC_WCID_BASE 0x1800 +#define PAIRWISE_KEY_TABLE_BASE 0x4000 -+#define PAIRWISE_IVEIV_TABLE_BASE 0x6000 +#define MAC_IVEIV_TABLE_BASE 0x6000 +#define MAC_WCID_ATTRIBUTE_BASE 0x6800 +#define SHARED_KEY_TABLE_BASE 0x6c00 +#define SHARED_KEY_MODE_BASE 0x7000 + ++#define MAC_WCID_ENTRY(__idx) \ ++ ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) ) ++#define PAIRWISE_KEY_ENTRY(__idx) \ ++ ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) ++#define MAC_IVEIV_ENTRY(__idx) \ ++ ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) ) ++#define MAC_WCID_ATTR_ENTRY(__idx) \ ++ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) +#define SHARED_KEY_ENTRY(__idx) \ -+ ( SHARED_KEY_TABLE_BASE + \ -+ ((__idx) * sizeof(struct hw_key_entry)) ) ++ ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) +#define SHARED_KEY_MODE_ENTRY(__idx) \ + ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) ) -+#define PAIRWISE_KEY_ENTRY(__idx) \ -+ ( PAIRWISE_KEY_TABLE_BASE + \ -+ ((__idx) * sizeof(struct hw_key_entry)) ) + -+#define MAC_WCID_ENTRY(__idx) \ -+ ( MAC_WCID_BASE + (2 * sizeof(u32) * (__idx)) ) -+#define MAC_WCID_ATTR_ENTRY(__idx) \ -+ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) ++struct mac_wcid_entry { ++ u8 mac[6]; ++ u8 reserved[2]; ++} __attribute__ ((packed)); ++ ++struct hw_key_entry { ++ u8 key[16]; ++ u8 tx_mic[8]; ++ u8 rx_mic[8]; ++} __attribute__ ((packed)); ++ ++struct mac_iveiv_entry { ++ u8 iv[8]; ++} __attribute__ ((packed)); ++ ++/* ++ * MAC_IVEIV: ++ */ ++#define MAC_IVEIV_EIV FIELD32(0x20000000) ++#define MAC_IVEIV_KEYIDX FIELD32(0xc0000000) + +/* + * MAC_WCID_ATTRIBUTE: -+ * KEYTAB: 0: shared key table, 1: pairwise key table -+ * BSS_IDX: multipleBSS index for the WCID + */ +#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001) -+#define MAC_WCID_ATTRIBUTE_PAIRKEY_MODE FIELD32(0x0000000e) ++#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e) +#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070) +#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380) + @@ -4682,7 +4700,7 @@ Signed-off-by: Ivo van Doorn +#endif /* RT2800PCI_H */ --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -139,6 +139,10 @@ struct rt2x00_chip { +@@ -138,6 +138,10 @@ struct rt2x00_chip { #define RT2561 0x0302 #define RT2661 0x0401 #define RT2571 0x1300 diff --git a/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch b/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch index 1da4725e88df..75b478d0f9f4 100644 --- a/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch +++ b/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch @@ -1,6 +1,6 @@ -From e380f1fa260d81cba1ebb1b6c333ef8c31f2a8c5 Mon Sep 17 00:00:00 2001 +From ec4f9f97afa3f792cf64035b8458bf2f8648a76f Mon Sep 17 00:00:00 2001 From: Ivo van Doorn -Date: Fri, 23 Jan 2009 17:16:11 +0100 +Date: Wed, 4 Feb 2009 20:45:56 +0100 Subject: [PATCH] rt2x00: Implement support for rt2800usb Add support for the rt2800usb chipset. @@ -13,10 +13,10 @@ Signed-off-by: Ivo van Doorn --- drivers/net/wireless/rt2x00/Kconfig | 14 + drivers/net/wireless/rt2x00/Makefile | 1 + - drivers/net/wireless/rt2x00/rt2800usb.c | 2905 +++++++++++++++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2800usb.h | 1944 +++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800usb.c | 2928 +++++++++++++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800usb.h | 1940 ++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00.h | 7 + - 5 files changed, 4871 insertions(+), 0 deletions(-) + 5 files changed, 4890 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.c create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.h @@ -29,7 +29,7 @@ Signed-off-by: Ivo van Doorn +obj-$(CONFIG_RT2800USB) += rt2800usb.o --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -0,0 +1,2905 @@ +@@ -0,0 +1,2928 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + @@ -388,20 +388,40 @@ Signed-off-by: Ivo van Doorn + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ ++ struct mac_wcid_entry wcid_entry; ++ struct mac_iveiv_entry iveiv_entry; + u32 offset; + u32 reg; + + offset = MAC_WCID_ATTR_ENTRY(crypto->aid); + -+ reg = 0; ++ rt2x00usb_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, + !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_PAIRKEY_MODE, -+ crypto->cipher); ++ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, -+ (crypto->cmd == SET_KEY) ? crypto->bssidx : 0); ++ (crypto->cmd == SET_KEY) * crypto->bssidx); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0); + rt2x00usb_register_write(rt2x00dev, offset, reg); ++ ++ offset = MAC_IVEIV_ENTRY(crypto->aid); ++ ++ memset(&iveiv_entry, 0, sizeof(iveiv_entry)); ++ if ((crypto->cipher == CIPHER_TKIP) || ++ (crypto->cipher == CIPHER_TKIP_NO_MIC) || ++ (crypto->cipher == CIPHER_AES)) ++ iveiv_entry.iv[3] |= 0x20; ++ iveiv_entry.iv[3] |= key->keyidx << 6; ++ rt2x00usb_register_multiwrite(rt2x00dev, offset, ++ &iveiv_entry, sizeof(iveiv_entry)); ++ ++ offset = MAC_WCID_ENTRY(crypto->aid); ++ ++ memset(&wcid_entry, 0, sizeof(wcid_entry)); ++ if (crypto->cmd == SET_KEY) ++ memcpy(&wcid_entry, crypto->address, ETH_ALEN); ++ rt2x00usb_register_multiwrite(rt2x00dev, offset, ++ &wcid_entry, sizeof(wcid_entry)); +} + +static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev, @@ -412,10 +432,11 @@ Signed-off-by: Ivo van Doorn + struct rt2x00_field32 field; + int timeout; + u32 offset; -+ u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { ++ key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; ++ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, @@ -430,34 +451,23 @@ Signed-off-by: Ivo van Doorn + offset, &key_entry, + sizeof(key_entry), + timeout); -+ -+ /* -+ * The driver does not support the IV/EIV generation -+ * in hardware. However it doesn't support the IV/EIV -+ * inside the ieee80211 frame either, but requires it -+ * to be provided seperately for the descriptor. -+ * rt2x00lib will cut the IV/EIV data out of all frames -+ * given to us by mac80211, but we must tell mac80211 -+ * to generate the IV/EIV data. -+ */ -+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * The cipher types are stored over multiple registers + * starting with SHARED_KEY_MODE_BASE each word will have -+ * 32 bits and contains the cipher types for 2 modes each. ++ * 32 bits and contains the cipher types for 2 bssidx each. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ -+ mask = key->hw_key_idx % 8; -+ field.bit_offset = (3 * mask); ++ field.bit_offset = (4 * key->keyidx); + field.bit_mask = 0x7 << field.bit_offset; + + offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); ++ + rt2x00usb_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, -+ (crypto->cmd == SET_KEY) ? crypto->cipher : 0); ++ (crypto->cmd == SET_KEY) * crypto->cipher); + rt2x00usb_register_write(rt2x00dev, offset, reg); + + /* @@ -476,13 +486,13 @@ Signed-off-by: Ivo van Doorn + int timeout; + u32 offset; + -+ /* -+ * 1 pairwise key is possible per AID, this means that the AID -+ * equals our hw_key_idx. -+ */ -+ key->hw_key_idx = crypto->aid; -+ + if (crypto->cmd == SET_KEY) { ++ /* ++ * 1 pairwise key is possible per AID, this means that the AID ++ * equals our hw_key_idx. ++ */ ++ key->hw_key_idx = crypto->aid; ++ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, @@ -497,17 +507,6 @@ Signed-off-by: Ivo van Doorn + offset, &key_entry, + sizeof(key_entry), + timeout); -+ -+ /* -+ * The driver does not support the IV/EIV generation -+ * in hardware. However it doesn't support the IV/EIV -+ * inside the ieee80211 frame either, but requires it -+ * to be provided seperately for the descriptor. -+ * rt2x00lib will cut the IV/EIV data out of all frames -+ * given to us by mac80211, but we must tell mac80211 -+ * to generate the IV/EIV data. -+ */ -+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* @@ -555,7 +554,7 @@ Signed-off-by: Ivo van Doorn + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 1); ++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, + !(filter_flags & FIF_CONTROL)); + rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg); @@ -616,7 +615,7 @@ Signed-off-by: Ivo van Doorn + + rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, -+ erp->ack_timeout); ++ DIV_ROUND_UP(erp->ack_timeout, erp->slot_time)); + rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®); @@ -633,8 +632,7 @@ Signed-off-by: Ivo van Doorn + + rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, + erp->basic_rates); -+ rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, -+ erp->basic_rates >> 32); ++ rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + + rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); @@ -1067,12 +1065,6 @@ Signed-off-by: Ivo van Doorn + */ + rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®); + qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); -+ -+ /* -+ * Update False CCA count from register. -+ */ -+ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, ®); -+ qual->false_cca = rt2x00_get_field32(reg, RX_STA_CNT1_FALSE_CCA); +} + +static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev) @@ -1129,19 +1121,24 @@ Signed-off-by: Ivo van Doorn + return FIRMWARE_RT2870; +} + -+static u16 rt2800usb_get_firmware_crc(const void *data, const size_t len) ++static bool rt2800usb_check_crc(const u8 *data, const size_t len) +{ ++ u16 fw_crc; + u16 crc; + + /* ++ * The last 2 bytes in the firmware array are the crc checksum itself, ++ * this means that we should never pass those 2 bytes to the crc ++ * algorithm. ++ */ ++ fw_crc = (data[len - 2] << 8 | data[len - 1]); ++ ++ /* + * Use the crc ccitt algorithm. + * This will return the same value as the legacy driver which + * used bit ordering reversion on the both the firmware bytes + * before input input as well as on the final output. + * Obviously using crc ccitt directly is much more efficient. -+ * The last 2 bytes in the firmware array are the crc checksum itself, -+ * this means that we should never pass those 2 bytes to the crc -+ * algorithm. + */ + crc = crc_ccitt(~0, data, len - 2); + @@ -1151,18 +1148,16 @@ Signed-off-by: Ivo van Doorn + * will be swapped, use swab16 to convert the crc to the correct + * value. + */ -+ return swab16(crc); ++ crc = swab16(crc); ++ ++ return fw_crc == crc; +} + -+static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, -+ const void *data, const size_t len) ++static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev, ++ const u8 *data, const size_t len) +{ -+ unsigned int i; -+ int status; -+ u32 reg; -+ u32 offset; -+ u32 length; + u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff; ++ size_t offset = 0; + + /* + * Firmware files: @@ -1173,24 +1168,51 @@ Signed-off-by: Ivo van Doorn + * within the file. The first blob is the same firmware as (a), + * but the second blob is for the additional chipsets. + */ -+ if (len != 4096 && len != 8192) { -+ ERROR(rt2x00dev, "Invalid firmware file length (len=%zu)\n", len); -+ return -ENOENT; ++ if (len != 4096 && len != 8192) ++ return FW_BAD_LENGTH; ++ ++ /* ++ * Check if we need the upper 4kb firmware data or not. ++ */ ++ if ((len == 4096) && ++ (chipset != 0x2860) && ++ (chipset != 0x2872) && ++ (chipset != 0x3070)) ++ return FW_BAD_VERSION; ++ ++ /* ++ * 8kb firmware files must be checked as if it were ++ * 2 seperate firmware files. ++ */ ++ while (offset < len) { ++ if (!rt2800usb_check_crc(data + offset, 4096)) ++ return FW_BAD_CRC; ++ ++ offset += 4096; + } + ++ return FW_OK; ++} ++ ++static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, ++ const u8 *data, const size_t len) ++{ ++ unsigned int i; ++ int status; ++ u32 reg; ++ u32 offset; ++ u32 length; ++ u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff; ++ ++ /* ++ * Check which section of the firmware we need. ++ */ + if ((chipset == 0x2860) || (chipset == 0x2872) || (chipset == 0x3070)) { + offset = 0; + length = 4096; -+ } else if (len == 8192) { ++ } else { + offset = 4096; + length = 4096; -+ } else { -+ ERROR(rt2x00dev, -+ "Current firmware does not support detected chipset %04x.\n", -+ chipset); -+ ERROR(rt2x00dev, -+ "Please upgrade to a more recent firmware version.\n"); -+ return -ENOENT; + } + + /* @@ -1328,7 +1350,7 @@ Signed-off-by: Ivo van Doorn + rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); + rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); + } else { -+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06); ++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); + rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); + } + @@ -1370,25 +1392,25 @@ Signed-off-by: Ivo van Doorn + rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); -+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 3); ++ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); -+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 0); ++ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 3); ++ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 0); ++ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); @@ -1526,12 +1548,12 @@ Signed-off-by: Ivo van Doorn + rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, ®); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 10); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 11); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 12); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 13); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 14); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 15); ++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 3); ++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); ++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); ++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); ++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); ++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); + rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg); + + rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, ®); @@ -1960,7 +1982,7 @@ Signed-off-by: Ivo van Doorn +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + __le32 *txi = skbdesc->desc; -+ __le32 *txwi = txi + TXINFO_DESC_SIZE; ++ __le32 *txwi = &txi[TXINFO_DESC_SIZE / sizeof(__le32)]; + u32 word; + + /* @@ -1968,7 +1990,6 @@ Signed-off-by: Ivo van Doorn + */ + rt2x00_desc_read(txwi, 0, &word); + rt2x00_set_field32(&word, TXWI_W0_FRAG, -+ test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags) || + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0); + rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); @@ -2009,7 +2030,7 @@ Signed-off-by: Ivo van Doorn + */ + rt2x00_desc_read(txi, 0, &word); + rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, -+ roundup(skb->len + TXWI_DESC_SIZE, 4)); ++ skb->len + TXWI_DESC_SIZE); + rt2x00_set_field32(&word, TXINFO_W0_WIV, 1); + rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2); + rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0); @@ -2067,10 +2088,11 @@ Signed-off-by: Ivo van Doorn + int length; + + /* -+ * The length _must_ be a multiple of 4, ++ * The length _must_ include 4 bytes padding, ++ * it should always be multiple of 4, + * but it must _not_ be a multiple of the USB packet size. + */ -+ length = roundup(entry->skb->len, 4); ++ length = roundup(entry->skb->len + 4, 4); + length += (4 * !(length % entry->queue->usb_maxpacket)); + + return length; @@ -2104,7 +2126,7 @@ Signed-off-by: Ivo van Doorn + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + __le32 *rxd = (__le32 *)entry->skb->data; -+ __le32 *rxwi = (__le32 *)(entry->skb->data + skbdesc->desc_len); ++ __le32 *rxwi; + u32 rxd0; + u32 rxwi0; + u32 rxwi1; @@ -2117,6 +2139,7 @@ Signed-off-by: Ivo van Doorn + */ + memcpy(skbdesc->desc, rxd, skbdesc->desc_len); + rxd = (__le32 *)skbdesc->desc; ++ rxwi = &rxd[RXD_DESC_SIZE / sizeof(__le32)]; + + /* + * It is now safe to read the descriptor on all architectures. @@ -2180,8 +2203,7 @@ Signed-off-by: Ivo van Doorn + + rxdesc->rssi = + (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) + -+ rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1) + -+ rt2x00_get_field32(rxwi2, RXWI_W2_RSSI2)) / 3; ++ rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2; + + rxdesc->noise = + (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) + @@ -2192,7 +2214,7 @@ Signed-off-by: Ivo van Doorn + /* + * Remove RXWI descriptor from start of buffer. + */ -+ skb_pull(entry->skb, RXWI_DESC_SIZE + skbdesc->desc_len); ++ skb_pull(entry->skb, skbdesc->desc_len); + skb_trim(entry->skb, rxdesc->size); +} + @@ -2751,7 +2773,7 @@ Signed-off-by: Ivo van Doorn +static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { + .probe_hw = rt2800usb_probe_hw, + .get_firmware_name = rt2800usb_get_firmware_name, -+ .get_firmware_crc = rt2800usb_get_firmware_crc, ++ .check_firmware = rt2800usb_check_firmware, + .load_firmware = rt2800usb_load_firmware, + .initialize = rt2x00usb_initialize, + .uninitialize = rt2x00usb_uninitialize, @@ -2766,6 +2788,7 @@ Signed-off-by: Ivo van Doorn + .write_beacon = rt2800usb_write_beacon, + .get_tx_data_len = rt2800usb_get_tx_data_len, + .kick_tx_queue = rt2800usb_kick_tx_queue, ++ .kill_tx_queue = rt2x00usb_kill_tx_queue, + .fill_rxdone = rt2800usb_fill_rxdone, + .config_shared_key = rt2800usb_config_shared_key, + .config_pairwise_key = rt2800usb_config_pairwise_key, @@ -2779,7 +2802,7 @@ Signed-off-by: Ivo van Doorn +static const struct data_queue_desc rt2800usb_queue_rx = { + .entry_num = RX_ENTRIES, + .data_size = DATA_FRAME_SIZE, -+ .desc_size = RXD_DESC_SIZE, ++ .desc_size = RXD_DESC_SIZE + RXWI_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb), +}; + @@ -2937,7 +2960,7 @@ Signed-off-by: Ivo van Doorn +module_exit(rt2800usb_exit); --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800usb.h -@@ -0,0 +1,1944 @@ +@@ -0,0 +1,1940 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + @@ -4239,64 +4262,60 @@ Signed-off-by: Ivo van Doorn +#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000) + +/* -+ * Security key table memory, base address = 0x1800 -+ */ -+struct hw_pairwise_ta_entry { -+ u8 address[6]; -+ u8 reserved[2]; -+} __attribute__ ((packed)); -+ -+struct wcid_entry { -+ u8 rx_ba_bitmat7; -+ u8 rx_ba_bitmat0; -+ u8 mac[6]; -+} __attribute__ ((packed)); -+ -+struct hw_key_entry { -+ u8 key[16]; -+ u8 tx_mic[8]; -+ u8 rx_mic[8]; -+} __attribute__ ((packed)); -+ -+/* + * Security key table memory. + * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry + * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry -+ * PAIRWISE_IVEIV_TABLE_BASE: 8-byte * 256-entry + * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry + * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry + * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry -+ * SHARED_KEY_MODE_BASE: 32-byte * 16-entry ++ * SHARED_KEY_MODE_BASE: 4-byte * 16-entry + */ +#define MAC_WCID_BASE 0x1800 +#define PAIRWISE_KEY_TABLE_BASE 0x4000 -+#define PAIRWISE_IVEIV_TABLE_BASE 0x6000 +#define MAC_IVEIV_TABLE_BASE 0x6000 +#define MAC_WCID_ATTRIBUTE_BASE 0x6800 +#define SHARED_KEY_TABLE_BASE 0x6c00 +#define SHARED_KEY_MODE_BASE 0x7000 + ++#define MAC_WCID_ENTRY(__idx) \ ++ ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) ) ++#define PAIRWISE_KEY_ENTRY(__idx) \ ++ ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) ++#define MAC_IVEIV_ENTRY(__idx) \ ++ ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) ) ++#define MAC_WCID_ATTR_ENTRY(__idx) \ ++ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) +#define SHARED_KEY_ENTRY(__idx) \ -+ ( SHARED_KEY_TABLE_BASE + \ -+ ((__idx) * sizeof(struct hw_key_entry)) ) ++ ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) +#define SHARED_KEY_MODE_ENTRY(__idx) \ + ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) ) -+#define PAIRWISE_KEY_ENTRY(__idx) \ -+ ( PAIRWISE_KEY_TABLE_BASE + \ -+ ((__idx) * sizeof(struct hw_key_entry)) ) + -+#define MAC_WCID_ENTRY(__idx) \ -+ ( MAC_WCID_BASE + (2 * sizeof(u32) * (__idx)) ) -+#define MAC_WCID_ATTR_ENTRY(__idx) \ -+ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) ++struct mac_wcid_entry { ++ u8 mac[6]; ++ u8 reserved[2]; ++} __attribute__ ((packed)); ++ ++struct hw_key_entry { ++ u8 key[16]; ++ u8 tx_mic[8]; ++ u8 rx_mic[8]; ++} __attribute__ ((packed)); ++ ++struct mac_iveiv_entry { ++ u8 iv[8]; ++} __attribute__ ((packed)); ++ ++/* ++ * MAC_IVEIV: ++ */ ++#define MAC_IVEIV_EIV FIELD32(0x20000000) ++#define MAC_IVEIV_KEYIDX FIELD32(0xc0000000) + +/* + * MAC_WCID_ATTRIBUTE: -+ * KEYTAB: 0: shared key table, 1: pairwise key table -+ * BSS_IDX: multipleBSS index for the WCID + */ +#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001) -+#define MAC_WCID_ATTRIBUTE_PAIRKEY_MODE FIELD32(0x0000000e) ++#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e) +#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070) +#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380) + @@ -4884,7 +4903,7 @@ Signed-off-by: Ivo van Doorn +#endif /* RT2800USB_H */ --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -143,6 +143,7 @@ struct rt2x00_chip { +@@ -142,6 +142,7 @@ struct rt2x00_chip { #define RT2860D 0x0681 /* 2.4GHz, 5GHz PCI/CB */ #define RT2890 0x0701 /* 2.4GHz PCIe */ #define RT2890D 0x0781 /* 2.4GHz, 5GHz PCIe */ @@ -4892,7 +4911,7 @@ Signed-off-by: Ivo van Doorn u16 rf; u32 rev; -@@ -778,6 +779,12 @@ struct rt2x00_dev { +@@ -780,6 +781,12 @@ struct rt2x00_dev { u8 freq_offset; /* diff --git a/package/mac80211/patches/320-rx_dma_unmap.patch b/package/mac80211/patches/320-rx_dma_unmap.patch deleted file mode 100644 index a22320a6f480..000000000000 --- a/package/mac80211/patches/320-rx_dma_unmap.patch +++ /dev/null @@ -1,37 +0,0 @@ -When freeing rx dma descriptors, use the right buffer size. -Fixes kernel oopses on module unload on ixp4xx and most likely -other platforms as well. - -Signed-off-by: Felix Fietkau - ---- a/drivers/net/wireless/ath5k/base.c -+++ b/drivers/net/wireless/ath5k/base.c -@@ -310,6 +310,19 @@ static inline void ath5k_txbuf_free(stru - bf->skb = NULL; - } - -+static inline void ath5k_rxbuf_free(struct ath5k_softc *sc, -+ struct ath5k_buf *bf) -+{ -+ BUG_ON(!bf); -+ if (!bf->skb) -+ return; -+ pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize, -+ PCI_DMA_FROMDEVICE); -+ dev_kfree_skb_any(bf->skb); -+ bf->skb = NULL; -+} -+ -+ - /* Queues setup */ - static struct ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc, - int qtype, int subtype); -@@ -1343,7 +1356,7 @@ ath5k_desc_free(struct ath5k_softc *sc, - list_for_each_entry(bf, &sc->txbuf, list) - ath5k_txbuf_free(sc, bf); - list_for_each_entry(bf, &sc->rxbuf, list) -- ath5k_txbuf_free(sc, bf); -+ ath5k_rxbuf_free(sc, bf); - - /* Free memory associated with all descriptors */ - pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr); diff --git a/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch b/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch index a293d96cb300..d71ba3f216d7 100644 --- a/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch +++ b/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch @@ -1,16 +1,16 @@ --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c -@@ -989,6 +989,9 @@ static void ath_unregister_led(struct at +@@ -1026,6 +1026,9 @@ static void ath_unregister_led(struct at static void ath_deinit_leds(struct ath_softc *sc) { + if (AR_SREV_9100(sc->sc_ah)) + return; + + cancel_delayed_work_sync(&sc->ath_led_blink_work); ath_unregister_led(&sc->assoc_led); sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; - ath_unregister_led(&sc->tx_led); -@@ -1002,6 +1005,9 @@ static void ath_init_leds(struct ath_sof +@@ -1040,6 +1043,9 @@ static void ath_init_leds(struct ath_sof char *trigger; int ret; diff --git a/package/mac80211/patches/402-ath9k-enable-debug.patch b/package/mac80211/patches/402-ath9k-enable-debug.patch index 0d362c010d44..33b7474f5998 100644 --- a/package/mac80211/patches/402-ath9k-enable-debug.patch +++ b/package/mac80211/patches/402-ath9k-enable-debug.patch @@ -1,6 +1,6 @@ --- a/config.mk +++ b/config.mk -@@ -95,7 +95,7 @@ ifneq ($(CONFIG_PCI),) +@@ -98,7 +98,7 @@ ifneq ($(CONFIG_PCI),) CONFIG_ATH5K=m # CONFIG_ATH5K_DEBUG is not set CONFIG_ATH9K=m -- 2.30.2