From 644570b830266ff33ff5f3542b9c838f93a55ea6 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Sat, 2 Apr 2011 06:20:12 -0700 Subject: [PATCH] 8390: Move the 8390 related drivers Moves the drivers for the National Semi-conductor 8390 chipset into drivers/net/ethernet/8390/ and the necessary Kconfig and Makefile changes. CC: Donald Becker CC: Paul Gortmaker CC: Alain Malek CC: Peter De Schrijver CC: "David Huggins-Daines" CC: Wim Dumon CC: Yoshinori Sato CC: David Hinds CC: Russell King Signed-off-by: Jeff Kirsher --- MAINTAINERS | 5 +- drivers/net/Kconfig | 283 -------------- drivers/net/Makefile | 23 -- drivers/net/arm/Kconfig | 8 - drivers/net/arm/Makefile | 1 - drivers/net/{ => ethernet/8390}/3c503.c | 0 drivers/net/{ => ethernet/8390}/3c503.h | 0 drivers/net/{ => ethernet/8390}/8390.c | 0 drivers/net/{ => ethernet/8390}/8390.h | 0 drivers/net/{ => ethernet/8390}/8390p.c | 0 drivers/net/ethernet/8390/Kconfig | 348 ++++++++++++++++++ drivers/net/ethernet/8390/Makefile | 29 ++ drivers/net/{ => ethernet/8390}/ac3200.c | 0 drivers/net/{ => ethernet/8390}/apne.c | 0 drivers/net/{ => ethernet/8390}/ax88796.c | 0 .../net/{pcmcia => ethernet/8390}/axnet_cs.c | 2 +- drivers/net/{ => ethernet/8390}/e2100.c | 0 drivers/net/{ => ethernet/8390}/es3210.c | 0 drivers/net/{arm => ethernet/8390}/etherh.c | 2 +- drivers/net/{ => ethernet/8390}/hp-plus.c | 0 drivers/net/{ => ethernet/8390}/hp.c | 0 drivers/net/{ => ethernet/8390}/hydra.c | 0 drivers/net/{ => ethernet/8390}/lib8390.c | 0 drivers/net/{ => ethernet/8390}/lne390.c | 0 drivers/net/{ => ethernet/8390}/mac8390.c | 0 drivers/net/{ => ethernet/8390}/ne-h8300.c | 0 drivers/net/{ => ethernet/8390}/ne.c | 0 drivers/net/{ => ethernet/8390}/ne2.c | 0 drivers/net/{ => ethernet/8390}/ne2k-pci.c | 0 drivers/net/{ => ethernet/8390}/ne3210.c | 0 .../net/{pcmcia => ethernet/8390}/pcnet_cs.c | 2 +- drivers/net/{ => ethernet/8390}/smc-mca.c | 0 drivers/net/{ => ethernet/8390}/smc-ultra.c | 0 drivers/net/{ => ethernet/8390}/smc-ultra32.c | 0 drivers/net/{ => ethernet/8390}/stnic.c | 0 drivers/net/{ => ethernet/8390}/wd.c | 0 drivers/net/{ => ethernet/8390}/zorro8390.c | 0 drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/pcmcia/Kconfig | 21 -- drivers/net/pcmcia/Makefile | 2 - 41 files changed, 384 insertions(+), 344 deletions(-) rename drivers/net/{ => ethernet/8390}/3c503.c (100%) rename drivers/net/{ => ethernet/8390}/3c503.h (100%) rename drivers/net/{ => ethernet/8390}/8390.c (100%) rename drivers/net/{ => ethernet/8390}/8390.h (100%) rename drivers/net/{ => ethernet/8390}/8390p.c (100%) create mode 100644 drivers/net/ethernet/8390/Kconfig create mode 100644 drivers/net/ethernet/8390/Makefile rename drivers/net/{ => ethernet/8390}/ac3200.c (100%) rename drivers/net/{ => ethernet/8390}/apne.c (100%) rename drivers/net/{ => ethernet/8390}/ax88796.c (100%) rename drivers/net/{pcmcia => ethernet/8390}/axnet_cs.c (99%) rename drivers/net/{ => ethernet/8390}/e2100.c (100%) rename drivers/net/{ => ethernet/8390}/es3210.c (100%) rename drivers/net/{arm => ethernet/8390}/etherh.c (99%) rename drivers/net/{ => ethernet/8390}/hp-plus.c (100%) rename drivers/net/{ => ethernet/8390}/hp.c (100%) rename drivers/net/{ => ethernet/8390}/hydra.c (100%) rename drivers/net/{ => ethernet/8390}/lib8390.c (100%) rename drivers/net/{ => ethernet/8390}/lne390.c (100%) rename drivers/net/{ => ethernet/8390}/mac8390.c (100%) rename drivers/net/{ => ethernet/8390}/ne-h8300.c (100%) rename drivers/net/{ => ethernet/8390}/ne.c (100%) rename drivers/net/{ => ethernet/8390}/ne2.c (100%) rename drivers/net/{ => ethernet/8390}/ne2k-pci.c (100%) rename drivers/net/{ => ethernet/8390}/ne3210.c (100%) rename drivers/net/{pcmcia => ethernet/8390}/pcnet_cs.c (99%) rename drivers/net/{ => ethernet/8390}/smc-mca.c (100%) rename drivers/net/{ => ethernet/8390}/smc-ultra.c (100%) rename drivers/net/{ => ethernet/8390}/smc-ultra32.c (100%) rename drivers/net/{ => ethernet/8390}/stnic.c (100%) rename drivers/net/{ => ethernet/8390}/wd.c (100%) rename drivers/net/{ => ethernet/8390}/zorro8390.c (100%) diff --git a/MAINTAINERS b/MAINTAINERS index 6f9dc946fc9b..c6945830ea46 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -170,8 +170,7 @@ F: include/linux/serial_8250.h 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.] L: netdev@vger.kernel.org S: Orphan / Obsolete -F: drivers/net/*8390* -F: drivers/net/ax88796.c +F: drivers/net/ethernet/8390/ 9P FILE SYSTEM M: Eric Van Hensbergen @@ -6568,7 +6567,7 @@ W: http://uclinux-h8.sourceforge.jp/ S: Supported F: arch/h8300/ F: drivers/ide/ide-h8300.c -F: drivers/net/ne-h8300.c +F: drivers/net/ethernet/8390/ne-h8300.c UDF FILESYSTEM M: Jan Kara diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index b686dab54ec6..c877f4114e04 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -237,22 +237,6 @@ config MACB source "drivers/net/arm/Kconfig" -config AX88796 - tristate "ASIX AX88796 NE2000 clone support" - depends on ARM || MIPS || SUPERH - select PHYLIB - select MDIO_BITBANG - help - AX88796 driver, using platform bus to provide - chip detection and resources - -config AX88796_93CX6 - bool "ASIX AX88796 external 93CX6 eeprom support" - depends on AX88796 - select EEPROM_93CX6 - help - Select this if your platform comes with an external 93CX6 eeprom. - config MACE tristate "MACE (Power Mac ethernet) support" depends on PPC_PMAC && PPC32 @@ -287,50 +271,6 @@ config BMAC To compile this driver as a module, choose M here: the module will be called bmac. -config HYDRA - tristate "Hydra support" - depends on ZORRO - select CRC32 - help - If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. - - To compile this driver as a module, choose M here: the module - will be called hydra. - -config ZORRO8390 - tristate "Zorro NS8390-based Ethernet support" - depends on ZORRO - select CRC32 - help - This driver is for Zorro Ethernet cards using an NS8390-compatible - chipset, like the Village Tronic Ariadne II and the Individual - Computers X-Surf Ethernet cards. If you have such a card, say Y. - Otherwise, say N. - - To compile this driver as a module, choose M here: the module - will be called zorro8390. - -config APNE - tristate "PCMCIA NE2000 support" - depends on AMIGA_PCMCIA - select CRC32 - help - If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, - say N. - - To compile this driver as a module, choose M here: the module - will be called apne. - -config MAC8390 - bool "Macintosh NS 8390 based ethernet cards" - depends on MAC - select CRC32 - help - If you want to include a driver to support Nubus or LC-PDS - Ethernet cards using an NS8390 chipset or its equivalent, say Y - and read the Ethernet-HOWTO, available from - . - config MAC89x0 tristate "Macintosh CS89x0 based ethernet cards" depends on MAC @@ -449,18 +389,6 @@ config SGI_O2MACE_ETH tristate "SGI O2 MACE Fast Ethernet support" depends on SGI_IP32=y -config STNIC - tristate "National DP83902AV support" - depends on SUPERH - select CRC32 - help - Support for cards based on the National Semiconductor DP83902AV - ST-NIC Serial Network Interface Controller for Twisted Pair. This - is a 10Mbit/sec Ethernet controller. Product overview and specs at - . - - If unsure, say N. - config SH_ETH tristate "Renesas SuperH Ethernet support" depends on SUPERH && \ @@ -591,74 +519,6 @@ config ELMC_II To compile this driver as a module, choose M here. The module will be called 3c527. -config NET_VENDOR_SMC - bool "Western Digital/SMC cards" - depends on ISA || MCA || EISA || MAC - help - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - . - - Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about Western Digital cards. If you say Y, you will be - asked for your specific card in the following questions. - -config WD80x3 - tristate "WD80*3 support" - depends on NET_VENDOR_SMC && ISA - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called wd. - -config ULTRAMCA - tristate "SMC Ultra MCA support" - depends on NET_VENDOR_SMC && MCA - select CRC32 - help - If you have a network (Ethernet) card of this type and are running - an MCA based system (PS/2), say Y and read the Ethernet-HOWTO, - available from . - - To compile this driver as a module, choose M here. The module - will be called smc-mca. - -config ULTRA - tristate "SMC Ultra support" - depends on NET_VENDOR_SMC && ISA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - Important: There have been many reports that, with some motherboards - mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, - such as some BusLogic models) causes corruption problems with many - operating systems. The Linux smc-ultra driver has a work-around for - this but keep it in mind if you have such a SCSI card and have - problems. - - To compile this driver as a module, choose M here. The module - will be called smc-ultra. - -config ULTRA32 - tristate "SMC Ultra32 EISA support" - depends on NET_VENDOR_SMC && EISA - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called smc-ultra32. - config BFIN_MAC tristate "Blackfin on-chip MAC support" depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537) @@ -979,18 +839,6 @@ config NET_ISA the remaining ISA network card questions. If you say Y, you will be asked for your specific card in the following questions. -config E2100 - tristate "Cabletron E21xx support" - depends on NET_ISA - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called e2100. - config EWRK3 tristate "EtherWORKS 3 (DE203, DE204, DE205) support" depends on NET_ISA @@ -1032,30 +880,6 @@ config EEXPRESS_PRO To compile this driver as a module, choose M here. The module will be called eepro. -config HPLAN_PLUS - tristate "HP PCLAN+ (27247B and 27252A) support" - depends on NET_ISA - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called hp-plus. - -config HPLAN - tristate "HP PCLAN (27245 and other 27xxx series) support" - depends on NET_ISA - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called hp. - config LP486E tristate "LP486E on board Ethernet" depends on NET_ISA @@ -1075,26 +899,6 @@ config ETH16I To compile this driver as a module, choose M here. The module will be called eth16i. -config NE2000 - tristate "NE2000/NE1000 support" - depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . Many Ethernet cards - without a specific driver are compatible with NE2000. - - If you have a PCI NE2000 card however, say N here and Y to "PCI - NE2000 and clone support" under "EISA, VLB, PCI and on board - controllers" below. If you have a NE2000 card and are running on - an MCA system (a bus system used on some IBM PS/2 computers and - laptops), say N here and Y to "NE/2 (ne2000 MCA version) support", - below. - - To compile this driver as a module, choose M here. The module - will be called ne. - config ZNET tristate "Zenith Z-Note support (EXPERIMENTAL)" depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API @@ -1116,18 +920,6 @@ config SEEQ8005 To compile this driver as a module, choose M here. The module will be called seeq8005. -config NE2_MCA - tristate "NE/2 (ne2000 MCA version) support" - depends on MCA_LEGACY - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called ne2. - config IBMLANA tristate "IBM LAN Adapter/A support" depends on MCA @@ -1183,18 +975,6 @@ config ADAPTEC_STARFIRE To compile this driver as a module, choose M here: the module will be called starfire. This is recommended. -config AC3200 - tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)" - depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called ac3200. - config KSZ884X_PCI tristate "Micrel KSZ8841/2 PCI" depends on NET_PCI && PCI @@ -1310,18 +1090,6 @@ config E100 To compile this driver as a module, choose M here. The module will be called e100. -config LNE390 - tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)" - depends on NET_PCI && EISA && EXPERIMENTAL - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called lne390. - config FEALNX tristate "Myson MTD-8xx PCI Ethernet support" depends on NET_PCI && PCI @@ -1342,50 +1110,6 @@ config NATSEMI More specific information and updates are available from . -config NE2K_PCI - tristate "PCI NE2000 and clones support (see help)" - depends on NET_PCI && PCI - select CRC32 - ---help--- - This driver is for NE2000 compatible PCI cards. It will not work - with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 - support" below). If you have a PCI NE2000 network (Ethernet) card, - say Y and read the Ethernet-HOWTO, available from - . - - This driver also works for the following NE2000 clone cards: - RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 - NetVin NV5000SC Via 86C926 SureCom NE34 Winbond - Holtek HT80232 Holtek HT80229 - - To compile this driver as a module, choose M here. The module - will be called ne2k-pci. - -config NE3210 - tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)" - depends on NET_PCI && EISA && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . Note that this driver - will NOT WORK for NE3200 cards as they are completely different. - - To compile this driver as a module, choose M here. The module - will be called ne3210. - -config ES3210 - tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)" - depends on NET_PCI && EISA && EXPERIMENTAL - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called es3210. - config 8139CP tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)" depends on NET_PCI && PCI && EXPERIMENTAL @@ -1723,13 +1447,6 @@ config FEC_MPC52xx_MDIO If not sure, enable. If compiled as module, it will be called fec_mpc52xx_phy. -config NE_H8300 - tristate "NE2000 compatible support for H8/300" - depends on H8300 - help - Say Y here if you want to use the NE2000 compatible - controller on the Renesas H8/300 processor. - config ATL2 tristate "Atheros L2 Fast Ethernet support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 59b6cc932037..4e8fa7372242 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -65,7 +65,6 @@ obj-$(CONFIG_SUNVNET) += sunvnet.o obj-$(CONFIG_MACE) += mace.o obj-$(CONFIG_BMAC) += bmac.o -obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o obj-$(CONFIG_E100) += e100.o obj-$(CONFIG_TLAN) += tlan.o obj-$(CONFIG_EPIC100) += epic100.o @@ -77,7 +76,6 @@ obj-$(CONFIG_YELLOWFIN) += yellowfin.o obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o obj-$(CONFIG_NATSEMI) += natsemi.o obj-$(CONFIG_NS83820) += ns83820.o -obj-$(CONFIG_STNIC) += stnic.o 8390.o obj-$(CONFIG_FEALNX) += fealnx.o obj-$(CONFIG_TIGON3) += tg3.o obj-$(CONFIG_BNX2) += bnx2.o @@ -112,9 +110,6 @@ obj-$(CONFIG_HAMACHI) += hamachi.o obj-$(CONFIG_NET) += Space.o loopback.o obj-$(CONFIG_SEEQ8005) += seeq8005.o obj-$(CONFIG_NET_SB1000) += sb1000.o -obj-$(CONFIG_MAC8390) += mac8390.o -obj-$(CONFIG_APNE) += apne.o 8390.o -obj-$(CONFIG_PCMCIA_PCNET) += 8390.o obj-$(CONFIG_HP100) += hp100.o obj-$(CONFIG_SMC9194) += smc9194.o obj-$(CONFIG_FEC) += fec.o @@ -122,24 +117,9 @@ obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y) obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o endif -obj-$(CONFIG_WD80x3) += wd.o 8390.o -obj-$(CONFIG_EL2) += 3c503.o 8390p.o -obj-$(CONFIG_NE2000) += ne.o 8390p.o -obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o -obj-$(CONFIG_HPLAN) += hp.o 8390p.o -obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o -obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o -obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o -obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o -obj-$(CONFIG_E2100) += e2100.o 8390.o -obj-$(CONFIG_ES3210) += es3210.o 8390.o -obj-$(CONFIG_LNE390) += lne390.o 8390.o -obj-$(CONFIG_NE3210) += ne3210.o 8390.o obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o obj-$(CONFIG_B44) += b44.o obj-$(CONFIG_FORCEDETH) += forcedeth.o -obj-$(CONFIG_NE_H8300) += ne-h8300.o -obj-$(CONFIG_AX88796) += ax88796.o obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o obj-$(CONFIG_FTGMAC100) += ftgmac100.o obj-$(CONFIG_FTMAC100) += ftmac100.o @@ -195,7 +175,6 @@ obj-$(CONFIG_ATP) += atp.o obj-$(CONFIG_NI5010) += ni5010.o obj-$(CONFIG_NI52) += ni52.o obj-$(CONFIG_ELPLUS) += 3c505.o -obj-$(CONFIG_AC3200) += ac3200.o 8390.o obj-$(CONFIG_APRICOT) += 82596.o obj-$(CONFIG_LASI_82596) += lasi_82596.o obj-$(CONFIG_SNI_82596) += sni_82596.o @@ -207,13 +186,11 @@ obj-$(CONFIG_SC92031) += sc92031.o obj-$(CONFIG_LP486E) += lp486e.o obj-$(CONFIG_ETH16I) += eth16i.o -obj-$(CONFIG_ZORRO8390) += zorro8390.o obj-$(CONFIG_EQUALIZER) += eql.o obj-$(CONFIG_KORINA) += korina.o obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o -obj-$(CONFIG_HYDRA) += hydra.o obj-$(CONFIG_CS89x0) += cs89x0.o obj-$(CONFIG_MACSONIC) += macsonic.o obj-$(CONFIG_MACMACE) += macmace.o diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig index d0c8cf254cb0..715bf2acc24b 100644 --- a/drivers/net/arm/Kconfig +++ b/drivers/net/arm/Kconfig @@ -17,14 +17,6 @@ config ARM_ETHER3 If you have an Acorn system with one of these network cards, you should say Y to this option if you wish to use it with Linux. -config ARM_ETHERH - tristate "I-cubed EtherH/ANT EtherM support" - depends on ARM && ARCH_ACORN - select CRC32 - help - If you have an Acorn system with one of these network cards, you - should say Y to this option if you wish to use it with Linux. - config ARM_AT91_ETHER tristate "AT91RM9200 Ethernet support" depends on ARM && ARCH_AT91RM9200 diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile index 63c57be34abf..f1e6150b6757 100644 --- a/drivers/net/arm/Makefile +++ b/drivers/net/arm/Makefile @@ -3,7 +3,6 @@ # Makefile for the ARM network device drivers # -obj-$(CONFIG_ARM_ETHERH) += etherh.o obj-$(CONFIG_ARM_ETHER3) += ether3.o obj-$(CONFIG_ARM_ETHER1) += ether1.o obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o diff --git a/drivers/net/3c503.c b/drivers/net/ethernet/8390/3c503.c similarity index 100% rename from drivers/net/3c503.c rename to drivers/net/ethernet/8390/3c503.c diff --git a/drivers/net/3c503.h b/drivers/net/ethernet/8390/3c503.h similarity index 100% rename from drivers/net/3c503.h rename to drivers/net/ethernet/8390/3c503.h diff --git a/drivers/net/8390.c b/drivers/net/ethernet/8390/8390.c similarity index 100% rename from drivers/net/8390.c rename to drivers/net/ethernet/8390/8390.c diff --git a/drivers/net/8390.h b/drivers/net/ethernet/8390/8390.h similarity index 100% rename from drivers/net/8390.h rename to drivers/net/ethernet/8390/8390.h diff --git a/drivers/net/8390p.c b/drivers/net/ethernet/8390/8390p.c similarity index 100% rename from drivers/net/8390p.c rename to drivers/net/ethernet/8390/8390p.c diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig new file mode 100644 index 000000000000..5cd53f1b84d3 --- /dev/null +++ b/drivers/net/ethernet/8390/Kconfig @@ -0,0 +1,348 @@ +# +# 8390 device configuration +# + +config NET_VENDOR_8390 + bool "National Semi-conductor 8390 devices" + depends on AMIGA_PCMCIA || PCI || SUPERH || ISA || MCA || EISA || \ + MAC || M32R || MACH_TX49XX || MCA_LEGACY || H8300 || \ + ARM || MIPS || ZORRO || PCMCIA || EXPERIMENTAL + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Western Digital cards. If you say Y, you will be + asked for your specific card in the following questions. + +if NET_VENDOR_8390 + +config EL2 + tristate "3c503 \"EtherLink II\" support" + depends on ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called 3c503. + +config AC3200 + tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)" + depends on PCI && (ISA || EISA) && EXPERIMENTAL + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called ac3200. + +config PCMCIA_AXNET + tristate "Asix AX88190 PCMCIA support" + depends on PCMCIA + ---help--- + Say Y here if you intend to attach an Asix AX88190-based PCMCIA + (PC-card) Fast Ethernet card to your computer. These cards are + nearly NE2000 compatible but need a separate driver due to a few + misfeatures. + + To compile this driver as a module, choose M here: the module will be + called axnet_cs. If unsure, say N. + +config AX88796 + tristate "ASIX AX88796 NE2000 clone support" + depends on (ARM || MIPS || SUPERH) + select PHYLIB + select MDIO_BITBANG + ---help--- + AX88796 driver, using platform bus to provide + chip detection and resources + +config AX88796_93CX6 + bool "ASIX AX88796 external 93CX6 eeprom support" + depends on AX88796 + select EEPROM_93CX6 + ---help--- + Select this if your platform comes with an external 93CX6 eeprom. + +config E2100 + tristate "Cabletron E21xx support" + depends on ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called e2100. + +config ES3210 + tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)" + depends on PCI && EISA && EXPERIMENTAL + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called es3210. + +config HPLAN_PLUS + tristate "HP PCLAN+ (27247B and 27252A) support" + depends on ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called hp-plus. + +config HPLAN + tristate "HP PCLAN (27245 and other 27xxx series) support" + depends on ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called hp. + +config HYDRA + tristate "Hydra support" + depends on ZORRO + select CRC32 + ---help--- + If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. + + To compile this driver as a module, choose M here: the module + will be called hydra. + +config ARM_ETHERH + tristate "I-cubed EtherH/ANT EtherM support" + depends on ARM && ARCH_ACORN + select CRC32 + ---help--- + If you have an Acorn system with one of these network cards, you + should say Y to this option if you wish to use it with Linux. + +config LNE390 + tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)" + depends on PCI && EISA && EXPERIMENTAL + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called lne390. + +config MAC8390 + bool "Macintosh NS 8390 based ethernet cards" + depends on MAC + select CRC32 + ---help--- + If you want to include a driver to support Nubus or LC-PDS + Ethernet cards using an NS8390 chipset or its equivalent, say Y + and read the Ethernet-HOWTO, available from + . + +config NE2000 + tristate "NE2000/NE1000 support" + depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX) + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . Many Ethernet cards + without a specific driver are compatible with NE2000. + + If you have a PCI NE2000 card however, say N here and Y to "PCI + NE2000 and clone support" under "EISA, VLB, PCI and on board + controllers" below. If you have a NE2000 card and are running on + an MCA system (a bus system used on some IBM PS/2 computers and + laptops), say N here and Y to "NE/2 (ne2000 MCA version) support", + below. + + To compile this driver as a module, choose M here. The module + will be called ne. + +config NE2_MCA + tristate "NE/2 (ne2000 MCA version) support" + depends on MCA_LEGACY + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called ne2. + +config NE2K_PCI + tristate "PCI NE2000 and clones support (see help)" + depends on PCI + select CRC32 + ---help--- + This driver is for NE2000 compatible PCI cards. It will not work + with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 + support" below). If you have a PCI NE2000 network (Ethernet) card, + say Y and read the Ethernet-HOWTO, available from + . + + This driver also works for the following NE2000 clone cards: + RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 + NetVin NV5000SC Via 86C926 SureCom NE34 Winbond + Holtek HT80232 Holtek HT80229 + + To compile this driver as a module, choose M here. The module + will be called ne2k-pci. + +config APNE + tristate "PCMCIA NE2000 support" + depends on AMIGA_PCMCIA + select CRC32 + ---help--- + If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, + say N. + + To compile this driver as a module, choose M here: the module + will be called apne. + +config NE3210 + tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)" + depends on PCI && EISA && EXPERIMENTAL + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . Note that this driver + will NOT WORK for NE3200 cards as they are completely different. + + To compile this driver as a module, choose M here. The module + will be called ne3210. + +config PCMCIA_PCNET + tristate "NE2000 compatible PCMCIA support" + depends on PCMCIA + select CRC32 + ---help--- + Say Y here if you intend to attach an NE2000 compatible PCMCIA + (PC-card) Ethernet or Fast Ethernet card to your computer. + + To compile this driver as a module, choose M here: the module will be + called pcnet_cs. If unsure, say N. + +config NE_H8300 + tristate "NE2000 compatible support for H8/300" + depends on H8300 + ---help--- + Say Y here if you want to use the NE2000 compatible + controller on the Renesas H8/300 processor. + +config STNIC + tristate "National DP83902AV support" + depends on SUPERH + select CRC32 + ---help--- + Support for cards based on the National Semiconductor DP83902AV + ST-NIC Serial Network Interface Controller for Twisted Pair. This + is a 10Mbit/sec Ethernet controller. Product overview and specs at + . + + If unsure, say N. + +config NET_VENDOR_SMC + bool "Western Digital/SMC cards" + depends on (ISA || MCA || EISA || MAC) + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Western Digital cards. If you say Y, you will be + asked for your specific card in the following questions. + +config ULTRAMCA + tristate "SMC Ultra MCA support" + depends on NET_VENDOR_SMC && MCA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type and are running + an MCA based system (PS/2), say Y and read the Ethernet-HOWTO, + available from . + + To compile this driver as a module, choose M here. The module + will be called smc-mca. + +config ULTRA + tristate "SMC Ultra support" + depends on NET_VENDOR_SMC && ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + Important: There have been many reports that, with some motherboards + mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, + such as some BusLogic models) causes corruption problems with many + operating systems. The Linux smc-ultra driver has a work-around for + this but keep it in mind if you have such a SCSI card and have + problems. + + To compile this driver as a module, choose M here. The module + will be called smc-ultra. + +config ULTRA32 + tristate "SMC Ultra32 EISA support" + depends on NET_VENDOR_SMC && EISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called smc-ultra32. + +config WD80x3 + tristate "WD80*3 support" + depends on NET_VENDOR_SMC && ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called wd. + +config ZORRO8390 + tristate "Zorro NS8390-based Ethernet support" + depends on ZORRO + select CRC32 + ---help--- + This driver is for Zorro Ethernet cards using an NS8390-compatible + chipset, like the Village Tronic Ariadne II and the Individual + Computers X-Surf Ethernet cards. If you have such a card, say Y. + Otherwise, say N. + + To compile this driver as a module, choose M here: the module + will be called zorro8390. + +endif # NET_VENDOR_8390 diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile new file mode 100644 index 000000000000..3337d7fb4344 --- /dev/null +++ b/drivers/net/ethernet/8390/Makefile @@ -0,0 +1,29 @@ +# +# Makefile for the 8390 network device drivers. +# + +obj-$(CONFIG_MAC8390) += mac8390.o +obj-$(CONFIG_AC3200) += ac3200.o 8390.o +obj-$(CONFIG_APNE) += apne.o 8390.o +obj-$(CONFIG_ARM_ETHERH) += etherh.o +obj-$(CONFIG_AX88796) += ax88796.o +obj-$(CONFIG_E2100) += e2100.o 8390.o +obj-$(CONFIG_EL2) += 3c503.o 8390p.o +obj-$(CONFIG_ES3210) += es3210.o 8390.o +obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o +obj-$(CONFIG_HPLAN) += hp.o 8390p.o +obj-$(CONFIG_HYDRA) += hydra.o 8390.o +obj-$(CONFIG_LNE390) += lne390.o 8390.o +obj-$(CONFIG_NE2000) += ne.o 8390p.o +obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o +obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o +obj-$(CONFIG_NE3210) += ne3210.o 8390.o +obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o +obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o +obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o +obj-$(CONFIG_STNIC) += stnic.o 8390.o +obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o +obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o +obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o +obj-$(CONFIG_WD80x3) += wd.o 8390.o +obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o diff --git a/drivers/net/ac3200.c b/drivers/net/ethernet/8390/ac3200.c similarity index 100% rename from drivers/net/ac3200.c rename to drivers/net/ethernet/8390/ac3200.c diff --git a/drivers/net/apne.c b/drivers/net/ethernet/8390/apne.c similarity index 100% rename from drivers/net/apne.c rename to drivers/net/ethernet/8390/apne.c diff --git a/drivers/net/ax88796.c b/drivers/net/ethernet/8390/ax88796.c similarity index 100% rename from drivers/net/ax88796.c rename to drivers/net/ethernet/8390/ax88796.c diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c similarity index 99% rename from drivers/net/pcmcia/axnet_cs.c rename to drivers/net/ethernet/8390/axnet_cs.c index 9953db711969..3e4b926c30dc 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/ethernet/8390/axnet_cs.c @@ -38,7 +38,7 @@ #include #include #include -#include "../8390.h" +#include "8390.h" #include #include diff --git a/drivers/net/e2100.c b/drivers/net/ethernet/8390/e2100.c similarity index 100% rename from drivers/net/e2100.c rename to drivers/net/ethernet/8390/e2100.c diff --git a/drivers/net/es3210.c b/drivers/net/ethernet/8390/es3210.c similarity index 100% rename from drivers/net/es3210.c rename to drivers/net/ethernet/8390/es3210.c diff --git a/drivers/net/arm/etherh.c b/drivers/net/ethernet/8390/etherh.c similarity index 99% rename from drivers/net/arm/etherh.c rename to drivers/net/ethernet/8390/etherh.c index 03e217a868d4..cf851faef311 100644 --- a/drivers/net/arm/etherh.c +++ b/drivers/net/ethernet/8390/etherh.c @@ -65,7 +65,7 @@ static char version[] __initdata = "EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n"; -#include "../lib8390.c" +#include "lib8390.c" static unsigned int net_debug = NET_DEBUG; diff --git a/drivers/net/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c similarity index 100% rename from drivers/net/hp-plus.c rename to drivers/net/ethernet/8390/hp-plus.c diff --git a/drivers/net/hp.c b/drivers/net/ethernet/8390/hp.c similarity index 100% rename from drivers/net/hp.c rename to drivers/net/ethernet/8390/hp.c diff --git a/drivers/net/hydra.c b/drivers/net/ethernet/8390/hydra.c similarity index 100% rename from drivers/net/hydra.c rename to drivers/net/ethernet/8390/hydra.c diff --git a/drivers/net/lib8390.c b/drivers/net/ethernet/8390/lib8390.c similarity index 100% rename from drivers/net/lib8390.c rename to drivers/net/ethernet/8390/lib8390.c diff --git a/drivers/net/lne390.c b/drivers/net/ethernet/8390/lne390.c similarity index 100% rename from drivers/net/lne390.c rename to drivers/net/ethernet/8390/lne390.c diff --git a/drivers/net/mac8390.c b/drivers/net/ethernet/8390/mac8390.c similarity index 100% rename from drivers/net/mac8390.c rename to drivers/net/ethernet/8390/mac8390.c diff --git a/drivers/net/ne-h8300.c b/drivers/net/ethernet/8390/ne-h8300.c similarity index 100% rename from drivers/net/ne-h8300.c rename to drivers/net/ethernet/8390/ne-h8300.c diff --git a/drivers/net/ne.c b/drivers/net/ethernet/8390/ne.c similarity index 100% rename from drivers/net/ne.c rename to drivers/net/ethernet/8390/ne.c diff --git a/drivers/net/ne2.c b/drivers/net/ethernet/8390/ne2.c similarity index 100% rename from drivers/net/ne2.c rename to drivers/net/ethernet/8390/ne2.c diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c similarity index 100% rename from drivers/net/ne2k-pci.c rename to drivers/net/ethernet/8390/ne2k-pci.c diff --git a/drivers/net/ne3210.c b/drivers/net/ethernet/8390/ne3210.c similarity index 100% rename from drivers/net/ne3210.c rename to drivers/net/ethernet/8390/ne3210.c diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c similarity index 99% rename from drivers/net/pcmcia/pcnet_cs.c rename to drivers/net/ethernet/8390/pcnet_cs.c index b4fd7c3ed077..40107614b5dc 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/ethernet/8390/pcnet_cs.c @@ -41,7 +41,7 @@ #include #include #include -#include "../8390.h" +#include "8390.h" #include #include diff --git a/drivers/net/smc-mca.c b/drivers/net/ethernet/8390/smc-mca.c similarity index 100% rename from drivers/net/smc-mca.c rename to drivers/net/ethernet/8390/smc-mca.c diff --git a/drivers/net/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c similarity index 100% rename from drivers/net/smc-ultra.c rename to drivers/net/ethernet/8390/smc-ultra.c diff --git a/drivers/net/smc-ultra32.c b/drivers/net/ethernet/8390/smc-ultra32.c similarity index 100% rename from drivers/net/smc-ultra32.c rename to drivers/net/ethernet/8390/smc-ultra32.c diff --git a/drivers/net/stnic.c b/drivers/net/ethernet/8390/stnic.c similarity index 100% rename from drivers/net/stnic.c rename to drivers/net/ethernet/8390/stnic.c diff --git a/drivers/net/wd.c b/drivers/net/ethernet/8390/wd.c similarity index 100% rename from drivers/net/wd.c rename to drivers/net/ethernet/8390/wd.c diff --git a/drivers/net/zorro8390.c b/drivers/net/ethernet/8390/zorro8390.c similarity index 100% rename from drivers/net/zorro8390.c rename to drivers/net/ethernet/8390/zorro8390.c diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 5e62efd58172..56ed5ec9a503 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -12,6 +12,7 @@ menuconfig ETHERNET if ETHERNET source "drivers/net/ethernet/3com/Kconfig" +source "drivers/net/ethernet/8390/Kconfig" source "drivers/net/ethernet/amd/Kconfig" endif # ETHERNET diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 1bc2ac25bab0..fc82588fb2f4 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -3,4 +3,5 @@ # obj-$(CONFIG_NET_VENDOR_3COM) += 3com/ +obj-$(CONFIG_NET_VENDOR_8390) += 8390/ obj-$(CONFIG_NET_VENDOR_AMD) += amd/ diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig index e17ad95f6668..72aa25786a95 100644 --- a/drivers/net/pcmcia/Kconfig +++ b/drivers/net/pcmcia/Kconfig @@ -31,16 +31,6 @@ config PCMCIA_FMVJ18X To compile this driver as a module, choose M here: the module will be called fmvj18x_cs. If unsure, say N. -config PCMCIA_PCNET - tristate "NE2000 compatible PCMCIA support" - select CRC32 - help - Say Y here if you intend to attach an NE2000 compatible PCMCIA - (PC-card) Ethernet or Fast Ethernet card to your computer. - - To compile this driver as a module, choose M here: the module will be - called pcnet_cs. If unsure, say N. - config PCMCIA_SMC91C92 tristate "SMC 91Cxx PCMCIA support" select CRC32 @@ -61,17 +51,6 @@ config PCMCIA_XIRC2PS To compile this driver as a module, choose M here: the module will be called xirc2ps_cs. If unsure, say N. -config PCMCIA_AXNET - tristate "Asix AX88190 PCMCIA support" - ---help--- - Say Y here if you intend to attach an Asix AX88190-based PCMCIA - (PC-card) Fast Ethernet card to your computer. These cards are - nearly NE2000 compatible but need a separate driver due to a few - misfeatures. - - To compile this driver as a module, choose M here: the module will be - called axnet_cs. If unsure, say N. - config ARCNET_COM20020_CS tristate "COM20020 ARCnet PCMCIA support" depends on ARCNET_COM20020 diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile index 985f0ae37f8f..c2b8b44c7bb1 100644 --- a/drivers/net/pcmcia/Makefile +++ b/drivers/net/pcmcia/Makefile @@ -4,10 +4,8 @@ # 16-bit client drivers obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o -obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o -obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o obj-$(CONFIG_PCMCIA_IBMTR) += ibmtr_cs.o -- 2.30.2