From 642978beb48331db1bafde0262eee33f658cfc39 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 3 Jan 2008 12:27:16 -0600 Subject: [PATCH] [SCSI] remove m68k NCR53C9x based drivers These drivers depend on the deprecated NCR53C9X core and need to be converted to the esp_scsi core. Acked-by: Boaz Harrosh Cc: Linux/m68k Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 60 --- drivers/scsi/Makefile | 7 - drivers/scsi/blz1230.c | 353 ----------------- drivers/scsi/blz2060.c | 306 --------------- drivers/scsi/cyberstorm.c | 377 ------------------ drivers/scsi/cyberstormII.c | 314 --------------- drivers/scsi/fastlane.c | 421 -------------------- drivers/scsi/mac_esp.c | 751 ------------------------------------ drivers/scsi/oktagon_esp.c | 606 ----------------------------- drivers/scsi/oktagon_io.S | 194 ---------- 10 files changed, 3389 deletions(-) delete mode 100644 drivers/scsi/blz1230.c delete mode 100644 drivers/scsi/blz2060.c delete mode 100644 drivers/scsi/cyberstorm.c delete mode 100644 drivers/scsi/cyberstormII.c delete mode 100644 drivers/scsi/fastlane.c delete mode 100644 drivers/scsi/mac_esp.c delete mode 100644 drivers/scsi/oktagon_esp.c delete mode 100644 drivers/scsi/oktagon_io.S diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 9680f82b3ecf..510bedb37575 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1578,45 +1578,6 @@ config GVP11_SCSI To compile this driver as a module, choose M here: the module will be called gvp11. -config CYBERSTORM_SCSI - tristate "CyberStorm SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with an original (MkI) Phase5 Cyberstorm - accelerator board and the optional Cyberstorm SCSI controller, - answer Y. Otherwise, say N. - -config CYBERSTORMII_SCSI - tristate "CyberStorm Mk II SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board - and the optional Cyberstorm SCSI controller, say Y. Otherwise, - answer N. - -config BLZ2060_SCSI - tristate "Blizzard 2060 SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with a Phase5 Blizzard 2060 accelerator board - and want to use the onboard SCSI controller, say Y. Otherwise, - answer N. - -config BLZ1230_SCSI - tristate "Blizzard 1230IV/1260 SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard - 1260 accelerator, and the optional SCSI module, say Y. Otherwise, - say N. - -config FASTLANE_SCSI - tristate "Fastlane SCSI support" - depends on ZORRO && SCSI - help - If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use - one in the near future, say Y to this question. Otherwise, say N. - config SCSI_A4000T tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)" depends on AMIGA && SCSI && EXPERIMENTAL @@ -1644,15 +1605,6 @@ config SCSI_ZORRO7XX accelerator card for the Amiga 1200, - the SCSI controller on the GVP Turbo 040/060 accelerator. -config OKTAGON_SCSI - tristate "BSC Oktagon SCSI support (EXPERIMENTAL)" - depends on ZORRO && SCSI && EXPERIMENTAL - help - If you have the BSC Oktagon SCSI disk controller for the Amiga, say - Y to this question. If you're in doubt about whether you have one, - see the picture at - . - config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI @@ -1705,18 +1657,6 @@ config MAC_SCSI SCSI-HOWTO, available from . -config SCSI_MAC_ESP - tristate "Macintosh NCR53c9[46] SCSI" - depends on MAC && SCSI - help - This is the NCR 53c9x SCSI controller found on most of the 68040 - based Macintoshes. If you have one of these say Y and read the - SCSI-HOWTO, available from - . - - To compile this driver as a module, choose M here: the - module will be called mac_esp. - config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" depends on MVME147 && SCSI=y diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 576cfc68d469..118dc525e267 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -44,15 +44,8 @@ obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o -obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o -obj-$(CONFIG_CYBERSTORMII_SCSI) += NCR53C9x.o cyberstormII.o -obj-$(CONFIG_BLZ2060_SCSI) += NCR53C9x.o blz2060.o -obj-$(CONFIG_BLZ1230_SCSI) += NCR53C9x.o blz1230.o -obj-$(CONFIG_FASTLANE_SCSI) += NCR53C9x.o fastlane.o -obj-$(CONFIG_OKTAGON_SCSI) += NCR53C9x.o oktagon_esp_mod.o obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o obj-$(CONFIG_MAC_SCSI) += mac_scsi.o -obj-$(CONFIG_SCSI_MAC_ESP) += mac_esp.o NCR53C9x.o obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o obj-$(CONFIG_MVME16x_SCSI) += 53c700.o mvme16x_scsi.o obj-$(CONFIG_BVME6000_SCSI) += 53c700.o bvme6000_scsi.o diff --git a/drivers/scsi/blz1230.c b/drivers/scsi/blz1230.c deleted file mode 100644 index 23f7c24ab809..000000000000 --- a/drivers/scsi/blz1230.c +++ /dev/null @@ -1,353 +0,0 @@ -/* blz1230.c: Driver for Blizzard 1230 SCSI IV Controller. - * - * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) - * - * This driver is based on the CyberStorm driver, hence the occasional - * reference to CyberStorm. - */ - -/* TODO: - * - * 1) Figure out how to make a cleaner merge with the sparc driver with regard - * to the caches and the Sparc MMU mapping. - * 2) Make as few routines required outside the generic driver. A lot of the - * routines in this file used to be inline! - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "scsi.h" -#include -#include "NCR53C9x.h" - -#include -#include -#include -#include - -#include - -#define MKIV 1 - -/* The controller registers can be found in the Z2 config area at these - * offsets: - */ -#define BLZ1230_ESP_ADDR 0x8000 -#define BLZ1230_DMA_ADDR 0x10000 -#define BLZ1230II_ESP_ADDR 0x10000 -#define BLZ1230II_DMA_ADDR 0x10021 - - -/* The Blizzard 1230 DMA interface - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * Only two things can be programmed in the Blizzard DMA: - * 1) The data direction is controlled by the status of bit 31 (1 = write) - * 2) The source/dest address (word aligned, shifted one right) in bits 30-0 - * - * Program DMA by first latching the highest byte of the address/direction - * (i.e. bits 31-24 of the long word constructed as described in steps 1+2 - * above). Then write each byte of the address/direction (starting with the - * top byte, working down) to the DMA address register. - * - * Figure out interrupt status by reading the ESP status byte. - */ -struct blz1230_dma_registers { - volatile unsigned char dma_addr; /* DMA address [0x0000] */ - unsigned char dmapad2[0x7fff]; - volatile unsigned char dma_latch; /* DMA latch [0x8000] */ -}; - -struct blz1230II_dma_registers { - volatile unsigned char dma_addr; /* DMA address [0x0000] */ - unsigned char dmapad2[0xf]; - volatile unsigned char dma_latch; /* DMA latch [0x0010] */ -}; - -#define BLZ1230_DMA_WRITE 0x80000000 - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are transferred to the ESP chip - * via PIO. - */ - -/***************************************************************** Detection */ -int __init blz1230_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct zorro_dev *z = NULL; - unsigned long address; - struct ESP_regs *eregs; - unsigned long board; - -#if MKIV -#define REAL_BLZ1230_ID ZORRO_PROD_PHASE5_BLIZZARD_1230_IV_1260 -#define REAL_BLZ1230_ESP_ADDR BLZ1230_ESP_ADDR -#define REAL_BLZ1230_DMA_ADDR BLZ1230_DMA_ADDR -#else -#define REAL_BLZ1230_ID ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060 -#define REAL_BLZ1230_ESP_ADDR BLZ1230II_ESP_ADDR -#define REAL_BLZ1230_DMA_ADDR BLZ1230II_DMA_ADDR -#endif - - if ((z = zorro_find_device(REAL_BLZ1230_ID, z))) { - board = z->resource.start; - if (request_mem_region(board+REAL_BLZ1230_ESP_ADDR, - sizeof(struct ESP_regs), "NCR53C9x")) { - /* Do some magic to figure out if the blizzard is - * equipped with a SCSI controller - */ - address = ZTWO_VADDR(board); - eregs = (struct ESP_regs *)(address + REAL_BLZ1230_ESP_ADDR); - esp = esp_allocate(tpnt, (void *)board + REAL_BLZ1230_ESP_ADDR, - 0); - - esp_write(eregs->esp_cfg1, (ESP_CONFIG1_PENABLE | 7)); - udelay(5); - if(esp_read(eregs->esp_cfg1) != (ESP_CONFIG1_PENABLE | 7)) - goto err_out; - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = 0; - esp->dma_invalidate = 0; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = 0; - esp->dma_led_on = 0; - esp->dma_led_off = 0; - esp->dma_poll = 0; - esp->dma_reset = 0; - - /* SCSI chip speed */ - esp->cfreq = 40000000; - - /* The DMA registers on the Blizzard are mapped - * relative to the device (i.e. in the same Zorro - * I/O block). - */ - esp->dregs = (void *)(address + REAL_BLZ1230_DMA_ADDR); - - /* ESP register base */ - esp->eregs = eregs; - - /* Set the command buffer */ - esp->esp_command = cmd_buffer; - esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); - - esp->irq = IRQ_AMIGA_PORTS; - esp->slot = board+REAL_BLZ1230_ESP_ADDR; - if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, - "Blizzard 1230 SCSI IV", esp->ehost)) - goto err_out; - - /* Figure out our scsi ID on the bus */ - esp->scsi_id = 7; - - /* We don't have a differential SCSI-bus. */ - esp->diff = 0; - - esp_initialize(esp); - - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use); - esps_running = esps_in_use; - return esps_in_use; - } - } - return 0; - - err_out: - scsi_unregister(esp->ehost); - esp_deallocate(esp); - release_mem_region(board+REAL_BLZ1230_ESP_ADDR, - sizeof(struct ESP_regs)); - return 0; -} - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Since the Blizzard DMA is fully dedicated to the ESP chip, - * the number of bytes sent (to the ESP chip) equals the number - * of bytes in the FIFO - there is no buffering in the DMA controller. - * XXXX Do I read this right? It is from host to ESP, right? - */ - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - /* I don't think there's any limit on the Blizzard DMA. So we use what - * the ESP chip can handle (24 bit). - */ - unsigned long sz = sp->SCp.this_residual; - if(sz > 0x1000000) - sz = 0x1000000; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ - ESPLOG(("intreq:<%04x>, intena:<%04x>\n", - amiga_custom.intreqr, amiga_custom.intenar)); -} - -void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length) -{ -#if MKIV - struct blz1230_dma_registers *dregs = - (struct blz1230_dma_registers *) (esp->dregs); -#else - struct blz1230II_dma_registers *dregs = - (struct blz1230II_dma_registers *) (esp->dregs); -#endif - - cache_clear(addr, length); - - addr >>= 1; - addr &= ~(BLZ1230_DMA_WRITE); - - /* First set latch */ - dregs->dma_latch = (addr >> 24) & 0xff; - - /* Then pump the address to the DMA address register */ -#if MKIV - dregs->dma_addr = (addr >> 24) & 0xff; -#endif - dregs->dma_addr = (addr >> 16) & 0xff; - dregs->dma_addr = (addr >> 8) & 0xff; - dregs->dma_addr = (addr ) & 0xff; -} - -void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length) -{ -#if MKIV - struct blz1230_dma_registers *dregs = - (struct blz1230_dma_registers *) (esp->dregs); -#else - struct blz1230II_dma_registers *dregs = - (struct blz1230II_dma_registers *) (esp->dregs); -#endif - - cache_push(addr, length); - - addr >>= 1; - addr |= BLZ1230_DMA_WRITE; - - /* First set latch */ - dregs->dma_latch = (addr >> 24) & 0xff; - - /* Then pump the address to the DMA address register */ -#if MKIV - dregs->dma_addr = (addr >> 24) & 0xff; -#endif - dregs->dma_addr = (addr >> 16) & 0xff; - dregs->dma_addr = (addr >> 8) & 0xff; - dregs->dma_addr = (addr ) & 0xff; -} - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(esp->irq); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(esp->irq); -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR); -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - return ((amiga_custom.intenar) & IF_PORTS); -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - /* On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } -} - -#define HOSTS_C - -int blz1230_esp_release(struct Scsi_Host *instance) -{ -#ifdef MODULE - unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev; - esp_deallocate((struct NCR_ESP *)instance->hostdata); - esp_release(); - release_mem_region(address, sizeof(struct ESP_regs)); - free_irq(IRQ_AMIGA_PORTS, esp_intr); -#endif - return 1; -} - - -static struct scsi_host_template driver_template = { - .proc_name = "esp-blz1230", - .proc_info = esp_proc_info, - .name = "Blizzard1230 SCSI IV", - .detect = blz1230_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = blz1230_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/blz2060.c b/drivers/scsi/blz2060.c deleted file mode 100644 index b6203ec00961..000000000000 --- a/drivers/scsi/blz2060.c +++ /dev/null @@ -1,306 +0,0 @@ -/* blz2060.c: Driver for Blizzard 2060 SCSI Controller. - * - * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) - * - * This driver is based on the CyberStorm driver, hence the occasional - * reference to CyberStorm. - */ - -/* TODO: - * - * 1) Figure out how to make a cleaner merge with the sparc driver with regard - * to the caches and the Sparc MMU mapping. - * 2) Make as few routines required outside the generic driver. A lot of the - * routines in this file used to be inline! - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "scsi.h" -#include -#include "NCR53C9x.h" - -#include -#include -#include -#include - -#include - -/* The controller registers can be found in the Z2 config area at these - * offsets: - */ -#define BLZ2060_ESP_ADDR 0x1ff00 -#define BLZ2060_DMA_ADDR 0x1ffe0 - - -/* The Blizzard 2060 DMA interface - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * Only two things can be programmed in the Blizzard DMA: - * 1) The data direction is controlled by the status of bit 31 (1 = write) - * 2) The source/dest address (word aligned, shifted one right) in bits 30-0 - * - * Figure out interrupt status by reading the ESP status byte. - */ -struct blz2060_dma_registers { - volatile unsigned char dma_led_ctrl; /* DMA led control [0x000] */ - unsigned char dmapad1[0x0f]; - volatile unsigned char dma_addr0; /* DMA address (MSB) [0x010] */ - unsigned char dmapad2[0x03]; - volatile unsigned char dma_addr1; /* DMA address [0x014] */ - unsigned char dmapad3[0x03]; - volatile unsigned char dma_addr2; /* DMA address [0x018] */ - unsigned char dmapad4[0x03]; - volatile unsigned char dma_addr3; /* DMA address (LSB) [0x01c] */ -}; - -#define BLZ2060_DMA_WRITE 0x80000000 - -/* DMA control bits */ -#define BLZ2060_DMA_LED 0x02 /* HD led control 1 = off */ - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static void dma_led_off(struct NCR_ESP *esp); -static void dma_led_on(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are transferred to the ESP chip - * via PIO. - */ - -/***************************************************************** Detection */ -int __init blz2060_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct zorro_dev *z = NULL; - unsigned long address; - - if ((z = zorro_find_device(ZORRO_PROD_PHASE5_BLIZZARD_2060, z))) { - unsigned long board = z->resource.start; - if (request_mem_region(board+BLZ2060_ESP_ADDR, - sizeof(struct ESP_regs), "NCR53C9x")) { - esp = esp_allocate(tpnt, (void *)board + BLZ2060_ESP_ADDR, 0); - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = 0; - esp->dma_invalidate = 0; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = 0; - esp->dma_led_on = &dma_led_on; - esp->dma_led_off = &dma_led_off; - esp->dma_poll = 0; - esp->dma_reset = 0; - - /* SCSI chip speed */ - esp->cfreq = 40000000; - - /* The DMA registers on the Blizzard are mapped - * relative to the device (i.e. in the same Zorro - * I/O block). - */ - address = (unsigned long)ZTWO_VADDR(board); - esp->dregs = (void *)(address + BLZ2060_DMA_ADDR); - - /* ESP register base */ - esp->eregs = (struct ESP_regs *)(address + BLZ2060_ESP_ADDR); - - /* Set the command buffer */ - esp->esp_command = cmd_buffer; - esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); - - esp->irq = IRQ_AMIGA_PORTS; - request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, - "Blizzard 2060 SCSI", esp->ehost); - - /* Figure out our scsi ID on the bus */ - esp->scsi_id = 7; - - /* We don't have a differential SCSI-bus. */ - esp->diff = 0; - - esp_initialize(esp); - - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use); - esps_running = esps_in_use; - return esps_in_use; - } - } - return 0; -} - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Since the Blizzard DMA is fully dedicated to the ESP chip, - * the number of bytes sent (to the ESP chip) equals the number - * of bytes in the FIFO - there is no buffering in the DMA controller. - * XXXX Do I read this right? It is from host to ESP, right? - */ - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - /* I don't think there's any limit on the Blizzard DMA. So we use what - * the ESP chip can handle (24 bit). - */ - unsigned long sz = sp->SCp.this_residual; - if(sz > 0x1000000) - sz = 0x1000000; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ - ESPLOG(("intreq:<%04x>, intena:<%04x>\n", - amiga_custom.intreqr, amiga_custom.intenar)); -} - -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct blz2060_dma_registers *dregs = - (struct blz2060_dma_registers *) (esp->dregs); - - cache_clear(addr, length); - - addr >>= 1; - addr &= ~(BLZ2060_DMA_WRITE); - dregs->dma_addr3 = (addr ) & 0xff; - dregs->dma_addr2 = (addr >> 8) & 0xff; - dregs->dma_addr1 = (addr >> 16) & 0xff; - dregs->dma_addr0 = (addr >> 24) & 0xff; -} - -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct blz2060_dma_registers *dregs = - (struct blz2060_dma_registers *) (esp->dregs); - - cache_push(addr, length); - - addr >>= 1; - addr |= BLZ2060_DMA_WRITE; - dregs->dma_addr3 = (addr ) & 0xff; - dregs->dma_addr2 = (addr >> 8) & 0xff; - dregs->dma_addr1 = (addr >> 16) & 0xff; - dregs->dma_addr0 = (addr >> 24) & 0xff; -} - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(esp->irq); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(esp->irq); -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR); -} - -static void dma_led_off(struct NCR_ESP *esp) -{ - ((struct blz2060_dma_registers *) (esp->dregs))->dma_led_ctrl = - BLZ2060_DMA_LED; -} - -static void dma_led_on(struct NCR_ESP *esp) -{ - ((struct blz2060_dma_registers *) (esp->dregs))->dma_led_ctrl = 0; -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - return ((amiga_custom.intenar) & IF_PORTS); -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - /* On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } -} - -#define HOSTS_C - -int blz2060_esp_release(struct Scsi_Host *instance) -{ -#ifdef MODULE - unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev; - - esp_deallocate((struct NCR_ESP *)instance->hostdata); - esp_release(); - release_mem_region(address, sizeof(struct ESP_regs)); - free_irq(IRQ_AMIGA_PORTS, esp_intr); -#endif - return 1; -} - - -static struct scsi_host_template driver_template = { - .proc_name = "esp-blz2060", - .proc_info = esp_proc_info, - .name = "Blizzard2060 SCSI", - .detect = blz2060_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = blz2060_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/cyberstorm.c b/drivers/scsi/cyberstorm.c deleted file mode 100644 index c6b98a42e89d..000000000000 --- a/drivers/scsi/cyberstorm.c +++ /dev/null @@ -1,377 +0,0 @@ -/* cyberstorm.c: Driver for CyberStorm SCSI Controller. - * - * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) - * - * The CyberStorm SCSI driver is based on David S. Miller's ESP driver - * for the Sparc computers. - * - * This work was made possible by Phase5 who willingly (and most generously) - * supported me with hardware and all the information I needed. - */ - -/* TODO: - * - * 1) Figure out how to make a cleaner merge with the sparc driver with regard - * to the caches and the Sparc MMU mapping. - * 2) Make as few routines required outside the generic driver. A lot of the - * routines in this file used to be inline! - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "scsi.h" -#include -#include "NCR53C9x.h" - -#include -#include -#include -#include - -#include - -/* The controller registers can be found in the Z2 config area at these - * offsets: - */ -#define CYBER_ESP_ADDR 0xf400 -#define CYBER_DMA_ADDR 0xf800 - - -/* The CyberStorm DMA interface */ -struct cyber_dma_registers { - volatile unsigned char dma_addr0; /* DMA address (MSB) [0x000] */ - unsigned char dmapad1[1]; - volatile unsigned char dma_addr1; /* DMA address [0x002] */ - unsigned char dmapad2[1]; - volatile unsigned char dma_addr2; /* DMA address [0x004] */ - unsigned char dmapad3[1]; - volatile unsigned char dma_addr3; /* DMA address (LSB) [0x006] */ - unsigned char dmapad4[0x3fb]; - volatile unsigned char cond_reg; /* DMA cond (ro) [0x402] */ -#define ctrl_reg cond_reg /* DMA control (wo) [0x402] */ -}; - -/* DMA control bits */ -#define CYBER_DMA_LED 0x80 /* HD led control 1 = on */ -#define CYBER_DMA_WRITE 0x40 /* DMA direction. 1 = write */ -#define CYBER_DMA_Z3 0x20 /* 16 (Z2) or 32 (CHIP/Z3) bit DMA transfer */ - -/* DMA status bits */ -#define CYBER_DMA_HNDL_INTR 0x80 /* DMA IRQ pending? */ - -/* The bits below appears to be Phase5 Debug bits only; they were not - * described by Phase5 so using them may seem a bit stupid... - */ -#define CYBER_HOST_ID 0x02 /* If set, host ID should be 7, otherwise - * it should be 6. - */ -#define CYBER_SLOW_CABLE 0x08 /* If *not* set, assume SLOW_CABLE */ - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static void dma_led_off(struct NCR_ESP *esp); -static void dma_led_on(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); - -static unsigned char ctrl_data = 0; /* Keep backup of the stuff written - * to ctrl_reg. Always write a copy - * to this register when writing to - * the hardware register! - */ - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are transferred to the ESP chip - * via PIO. - */ - -/***************************************************************** Detection */ -int __init cyber_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct zorro_dev *z = NULL; - unsigned long address; - - while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { - unsigned long board = z->resource.start; - if ((z->id == ZORRO_PROD_PHASE5_BLIZZARD_1220_CYBERSTORM || - z->id == ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060) && - request_mem_region(board+CYBER_ESP_ADDR, - sizeof(struct ESP_regs), "NCR53C9x")) { - /* Figure out if this is a CyberStorm or really a - * Fastlane/Blizzard Mk II by looking at the board size. - * CyberStorm maps 64kB - * (ZORRO_PROD_PHASE5_BLIZZARD_1220_CYBERSTORM does anyway) - */ - if(z->resource.end-board != 0xffff) { - release_mem_region(board+CYBER_ESP_ADDR, - sizeof(struct ESP_regs)); - return 0; - } - esp = esp_allocate(tpnt, (void *)board + CYBER_ESP_ADDR, 0); - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = 0; - esp->dma_invalidate = 0; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = 0; - esp->dma_led_on = &dma_led_on; - esp->dma_led_off = &dma_led_off; - esp->dma_poll = 0; - esp->dma_reset = 0; - - /* SCSI chip speed */ - esp->cfreq = 40000000; - - /* The DMA registers on the CyberStorm are mapped - * relative to the device (i.e. in the same Zorro - * I/O block). - */ - address = (unsigned long)ZTWO_VADDR(board); - esp->dregs = (void *)(address + CYBER_DMA_ADDR); - - /* ESP register base */ - esp->eregs = (struct ESP_regs *)(address + CYBER_ESP_ADDR); - - /* Set the command buffer */ - esp->esp_command = cmd_buffer; - esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); - - esp->irq = IRQ_AMIGA_PORTS; - request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, - "CyberStorm SCSI", esp->ehost); - /* Figure out our scsi ID on the bus */ - /* The DMA cond flag contains a hardcoded jumper bit - * which can be used to select host number 6 or 7. - * However, even though it may change, we use a hardcoded - * value of 7. - */ - esp->scsi_id = 7; - - /* We don't have a differential SCSI-bus. */ - esp->diff = 0; - - esp_initialize(esp); - - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use); - esps_running = esps_in_use; - return esps_in_use; - } - } - return 0; -} - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Since the CyberStorm DMA is fully dedicated to the ESP chip, - * the number of bytes sent (to the ESP chip) equals the number - * of bytes in the FIFO - there is no buffering in the DMA controller. - * XXXX Do I read this right? It is from host to ESP, right? - */ - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - /* I don't think there's any limit on the CyberDMA. So we use what - * the ESP chip can handle (24 bit). - */ - unsigned long sz = sp->SCp.this_residual; - if(sz > 0x1000000) - sz = 0x1000000; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ - ESPLOG(("esp%d: dma -- cond_reg<%02x>\n", - esp->esp_id, ((struct cyber_dma_registers *) - (esp->dregs))->cond_reg)); - ESPLOG(("intreq:<%04x>, intena:<%04x>\n", - amiga_custom.intreqr, amiga_custom.intenar)); -} - -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct cyber_dma_registers *dregs = - (struct cyber_dma_registers *) esp->dregs; - - cache_clear(addr, length); - - addr &= ~(1); - dregs->dma_addr0 = (addr >> 24) & 0xff; - dregs->dma_addr1 = (addr >> 16) & 0xff; - dregs->dma_addr2 = (addr >> 8) & 0xff; - dregs->dma_addr3 = (addr ) & 0xff; - ctrl_data &= ~(CYBER_DMA_WRITE); - - /* Check if physical address is outside Z2 space and of - * block length/block aligned in memory. If this is the - * case, enable 32 bit transfer. In all other cases, fall back - * to 16 bit transfer. - * Obviously 32 bit transfer should be enabled if the DMA address - * and length are 32 bit aligned. However, this leads to some - * strange behavior. Even 64 bit aligned addr/length fails. - * Until I've found a reason for this, 32 bit transfer is only - * used for full-block transfers (1kB). - * -jskov - */ -#if 0 - if((addr & 0x3fc) || length & 0x3ff || ((addr > 0x200000) && - (addr < 0xff0000))) - ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */ - else - ctrl_data |= CYBER_DMA_Z3; /* CHIP/Z3, do 32 bit DMA */ -#else - ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */ -#endif - dregs->ctrl_reg = ctrl_data; -} - -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct cyber_dma_registers *dregs = - (struct cyber_dma_registers *) esp->dregs; - - cache_push(addr, length); - - addr |= 1; - dregs->dma_addr0 = (addr >> 24) & 0xff; - dregs->dma_addr1 = (addr >> 16) & 0xff; - dregs->dma_addr2 = (addr >> 8) & 0xff; - dregs->dma_addr3 = (addr ) & 0xff; - ctrl_data |= CYBER_DMA_WRITE; - - /* See comment above */ -#if 0 - if((addr & 0x3fc) || length & 0x3ff || ((addr > 0x200000) && - (addr < 0xff0000))) - ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */ - else - ctrl_data |= CYBER_DMA_Z3; /* CHIP/Z3, do 32 bit DMA */ -#else - ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */ -#endif - dregs->ctrl_reg = ctrl_data; -} - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(esp->irq); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(esp->irq); -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - /* It's important to check the DMA IRQ bit in the correct way! */ - return ((esp_read(esp->eregs->esp_status) & ESP_STAT_INTR) && - ((((struct cyber_dma_registers *)(esp->dregs))->cond_reg) & - CYBER_DMA_HNDL_INTR)); -} - -static void dma_led_off(struct NCR_ESP *esp) -{ - ctrl_data &= ~CYBER_DMA_LED; - ((struct cyber_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data; -} - -static void dma_led_on(struct NCR_ESP *esp) -{ - ctrl_data |= CYBER_DMA_LED; - ((struct cyber_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data; -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - return ((amiga_custom.intenar) & IF_PORTS); -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - /* On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } -} - -#define HOSTS_C - -int cyber_esp_release(struct Scsi_Host *instance) -{ -#ifdef MODULE - unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev; - - esp_deallocate((struct NCR_ESP *)instance->hostdata); - esp_release(); - release_mem_region(address, sizeof(struct ESP_regs)); - free_irq(IRQ_AMIGA_PORTS, esp_intr); -#endif - return 1; -} - - -static struct scsi_host_template driver_template = { - .proc_name = "esp-cyberstorm", - .proc_info = esp_proc_info, - .name = "CyberStorm SCSI", - .detect = cyber_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = cyber_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/cyberstormII.c b/drivers/scsi/cyberstormII.c deleted file mode 100644 index e336e853e66f..000000000000 --- a/drivers/scsi/cyberstormII.c +++ /dev/null @@ -1,314 +0,0 @@ -/* cyberstormII.c: Driver for CyberStorm SCSI Mk II - * - * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) - * - * This driver is based on cyberstorm.c - */ - -/* TODO: - * - * 1) Figure out how to make a cleaner merge with the sparc driver with regard - * to the caches and the Sparc MMU mapping. - * 2) Make as few routines required outside the generic driver. A lot of the - * routines in this file used to be inline! - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "scsi.h" -#include -#include "NCR53C9x.h" - -#include -#include -#include -#include - -#include - -/* The controller registers can be found in the Z2 config area at these - * offsets: - */ -#define CYBERII_ESP_ADDR 0x1ff03 -#define CYBERII_DMA_ADDR 0x1ff43 - - -/* The CyberStorm II DMA interface */ -struct cyberII_dma_registers { - volatile unsigned char cond_reg; /* DMA cond (ro) [0x000] */ -#define ctrl_reg cond_reg /* DMA control (wo) [0x000] */ - unsigned char dmapad4[0x3f]; - volatile unsigned char dma_addr0; /* DMA address (MSB) [0x040] */ - unsigned char dmapad1[3]; - volatile unsigned char dma_addr1; /* DMA address [0x044] */ - unsigned char dmapad2[3]; - volatile unsigned char dma_addr2; /* DMA address [0x048] */ - unsigned char dmapad3[3]; - volatile unsigned char dma_addr3; /* DMA address (LSB) [0x04c] */ -}; - -/* DMA control bits */ -#define CYBERII_DMA_LED 0x02 /* HD led control 1 = on */ - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static void dma_led_off(struct NCR_ESP *esp); -static void dma_led_on(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are transferred to the ESP chip - * via PIO. - */ - -/***************************************************************** Detection */ -int __init cyberII_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct zorro_dev *z = NULL; - unsigned long address; - struct ESP_regs *eregs; - - if ((z = zorro_find_device(ZORRO_PROD_PHASE5_CYBERSTORM_MK_II, z))) { - unsigned long board = z->resource.start; - if (request_mem_region(board+CYBERII_ESP_ADDR, - sizeof(struct ESP_regs), "NCR53C9x")) { - /* Do some magic to figure out if the CyberStorm Mk II - * is equipped with a SCSI controller - */ - address = (unsigned long)ZTWO_VADDR(board); - eregs = (struct ESP_regs *)(address + CYBERII_ESP_ADDR); - - esp = esp_allocate(tpnt, (void *)board + CYBERII_ESP_ADDR, 0); - - esp_write(eregs->esp_cfg1, (ESP_CONFIG1_PENABLE | 7)); - udelay(5); - if(esp_read(eregs->esp_cfg1) != (ESP_CONFIG1_PENABLE | 7)) { - esp_deallocate(esp); - scsi_unregister(esp->ehost); - release_mem_region(board+CYBERII_ESP_ADDR, - sizeof(struct ESP_regs)); - return 0; /* Bail out if address did not hold data */ - } - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = 0; - esp->dma_invalidate = 0; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = 0; - esp->dma_led_on = &dma_led_on; - esp->dma_led_off = &dma_led_off; - esp->dma_poll = 0; - esp->dma_reset = 0; - - /* SCSI chip speed */ - esp->cfreq = 40000000; - - /* The DMA registers on the CyberStorm are mapped - * relative to the device (i.e. in the same Zorro - * I/O block). - */ - esp->dregs = (void *)(address + CYBERII_DMA_ADDR); - - /* ESP register base */ - esp->eregs = eregs; - - /* Set the command buffer */ - esp->esp_command = cmd_buffer; - esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); - - esp->irq = IRQ_AMIGA_PORTS; - request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, - "CyberStorm SCSI Mk II", esp->ehost); - - /* Figure out our scsi ID on the bus */ - esp->scsi_id = 7; - - /* We don't have a differential SCSI-bus. */ - esp->diff = 0; - - esp_initialize(esp); - - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use); - esps_running = esps_in_use; - return esps_in_use; - } - } - return 0; -} - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Since the CyberStorm DMA is fully dedicated to the ESP chip, - * the number of bytes sent (to the ESP chip) equals the number - * of bytes in the FIFO - there is no buffering in the DMA controller. - * XXXX Do I read this right? It is from host to ESP, right? - */ - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - /* I don't think there's any limit on the CyberDMA. So we use what - * the ESP chip can handle (24 bit). - */ - unsigned long sz = sp->SCp.this_residual; - if(sz > 0x1000000) - sz = 0x1000000; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ - ESPLOG(("esp%d: dma -- cond_reg<%02x>\n", - esp->esp_id, ((struct cyberII_dma_registers *) - (esp->dregs))->cond_reg)); - ESPLOG(("intreq:<%04x>, intena:<%04x>\n", - amiga_custom.intreqr, amiga_custom.intenar)); -} - -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct cyberII_dma_registers *dregs = - (struct cyberII_dma_registers *) esp->dregs; - - cache_clear(addr, length); - - addr &= ~(1); - dregs->dma_addr0 = (addr >> 24) & 0xff; - dregs->dma_addr1 = (addr >> 16) & 0xff; - dregs->dma_addr2 = (addr >> 8) & 0xff; - dregs->dma_addr3 = (addr ) & 0xff; -} - -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct cyberII_dma_registers *dregs = - (struct cyberII_dma_registers *) esp->dregs; - - cache_push(addr, length); - - addr |= 1; - dregs->dma_addr0 = (addr >> 24) & 0xff; - dregs->dma_addr1 = (addr >> 16) & 0xff; - dregs->dma_addr2 = (addr >> 8) & 0xff; - dregs->dma_addr3 = (addr ) & 0xff; -} - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(esp->irq); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(esp->irq); -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - /* It's important to check the DMA IRQ bit in the correct way! */ - return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR); -} - -static void dma_led_off(struct NCR_ESP *esp) -{ - ((struct cyberII_dma_registers *)(esp->dregs))->ctrl_reg &= ~CYBERII_DMA_LED; -} - -static void dma_led_on(struct NCR_ESP *esp) -{ - ((struct cyberII_dma_registers *)(esp->dregs))->ctrl_reg |= CYBERII_DMA_LED; -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - return ((amiga_custom.intenar) & IF_PORTS); -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - /* On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } -} - -#define HOSTS_C - -int cyberII_esp_release(struct Scsi_Host *instance) -{ -#ifdef MODULE - unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev; - - esp_deallocate((struct NCR_ESP *)instance->hostdata); - esp_release(); - release_mem_region(address, sizeof(struct ESP_regs)); - free_irq(IRQ_AMIGA_PORTS, esp_intr); -#endif - return 1; -} - - -static struct scsi_host_template driver_template = { - .proc_name = "esp-cyberstormII", - .proc_info = esp_proc_info, - .name = "CyberStorm Mk II SCSI", - .detect = cyberII_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = cyberII_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/fastlane.c b/drivers/scsi/fastlane.c deleted file mode 100644 index 4266a2139b5f..000000000000 --- a/drivers/scsi/fastlane.c +++ /dev/null @@ -1,421 +0,0 @@ -/* fastlane.c: Driver for Phase5's Fastlane SCSI Controller. - * - * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) - * - * This driver is based on the CyberStorm driver, hence the occasional - * reference to CyberStorm. - * - * Betatesting & crucial adjustments by - * Patrik Rak (prak3264@ss1000.ms.mff.cuni.cz) - * - */ - -/* TODO: - * - * o According to the doc from laire, it is required to reset the DMA when - * the transfer is done. ATM we reset DMA just before every new - * dma_init_(read|write). - * - * 1) Figure out how to make a cleaner merge with the sparc driver with regard - * to the caches and the Sparc MMU mapping. - * 2) Make as few routines required outside the generic driver. A lot of the - * routines in this file used to be inline! - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "scsi.h" -#include -#include "NCR53C9x.h" - -#include -#include - -#include -#include - -#include - -/* Such day has just come... */ -#if 0 -/* Let this defined unless you really need to enable DMA IRQ one day */ -#define NODMAIRQ -#endif - -/* The controller registers can be found in the Z2 config area at these - * offsets: - */ -#define FASTLANE_ESP_ADDR 0x1000001 -#define FASTLANE_DMA_ADDR 0x1000041 - - -/* The Fastlane DMA interface */ -struct fastlane_dma_registers { - volatile unsigned char cond_reg; /* DMA status (ro) [0x0000] */ -#define ctrl_reg cond_reg /* DMA control (wo) [0x0000] */ - unsigned char dmapad1[0x3f]; - volatile unsigned char clear_strobe; /* DMA clear (wo) [0x0040] */ -}; - - -/* DMA status bits */ -#define FASTLANE_DMA_MINT 0x80 -#define FASTLANE_DMA_IACT 0x40 -#define FASTLANE_DMA_CREQ 0x20 - -/* DMA control bits */ -#define FASTLANE_DMA_FCODE 0xa0 -#define FASTLANE_DMA_MASK 0xf3 -#define FASTLANE_DMA_LED 0x10 /* HD led control 1 = on */ -#define FASTLANE_DMA_WRITE 0x08 /* 1 = write */ -#define FASTLANE_DMA_ENABLE 0x04 /* Enable DMA */ -#define FASTLANE_DMA_EDI 0x02 /* Enable DMA IRQ ? */ -#define FASTLANE_DMA_ESI 0x01 /* Enable SCSI IRQ */ - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 vaddr, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static void dma_irq_exit(struct NCR_ESP *esp); -static void dma_led_off(struct NCR_ESP *esp); -static void dma_led_on(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); - -static unsigned char ctrl_data = 0; /* Keep backup of the stuff written - * to ctrl_reg. Always write a copy - * to this register when writing to - * the hardware register! - */ - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are transferred to the ESP chip - * via PIO. - */ - -static inline void dma_clear(struct NCR_ESP *esp) -{ - struct fastlane_dma_registers *dregs = - (struct fastlane_dma_registers *) (esp->dregs); - unsigned long *t; - - ctrl_data = (ctrl_data & FASTLANE_DMA_MASK); - dregs->ctrl_reg = ctrl_data; - - t = (unsigned long *)(esp->edev); - - dregs->clear_strobe = 0; - *t = 0 ; -} - -/***************************************************************** Detection */ -int __init fastlane_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct zorro_dev *z = NULL; - unsigned long address; - - if ((z = zorro_find_device(ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060, z))) { - unsigned long board = z->resource.start; - if (request_mem_region(board+FASTLANE_ESP_ADDR, - sizeof(struct ESP_regs), "NCR53C9x")) { - /* Check if this is really a fastlane controller. The problem - * is that also the cyberstorm and blizzard controllers use - * this ID value. Fortunately only Fastlane maps in Z3 space - */ - if (board < 0x1000000) { - goto err_release; - } - esp = esp_allocate(tpnt, (void *)board + FASTLANE_ESP_ADDR, 0); - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = 0; - esp->dma_invalidate = 0; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = &dma_irq_exit; - esp->dma_led_on = &dma_led_on; - esp->dma_led_off = &dma_led_off; - esp->dma_poll = 0; - esp->dma_reset = 0; - - /* Initialize the portBits (enable IRQs) */ - ctrl_data = (FASTLANE_DMA_FCODE | -#ifndef NODMAIRQ - FASTLANE_DMA_EDI | -#endif - FASTLANE_DMA_ESI); - - - /* SCSI chip clock */ - esp->cfreq = 40000000; - - - /* Map the physical address space into virtual kernel space */ - address = (unsigned long) - z_ioremap(board, z->resource.end-board+1); - - if(!address){ - printk("Could not remap Fastlane controller memory!"); - goto err_unregister; - } - - - /* The DMA registers on the Fastlane are mapped - * relative to the device (i.e. in the same Zorro - * I/O block). - */ - esp->dregs = (void *)(address + FASTLANE_DMA_ADDR); - - /* ESP register base */ - esp->eregs = (struct ESP_regs *)(address + FASTLANE_ESP_ADDR); - - /* Board base */ - esp->edev = (void *) address; - - /* Set the command buffer */ - esp->esp_command = cmd_buffer; - esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); - - esp->irq = IRQ_AMIGA_PORTS; - esp->slot = board+FASTLANE_ESP_ADDR; - if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, - "Fastlane SCSI", esp->ehost)) { - printk(KERN_WARNING "Fastlane: Could not get IRQ%d, aborting.\n", IRQ_AMIGA_PORTS); - goto err_unmap; - } - - /* Controller ID */ - esp->scsi_id = 7; - - /* We don't have a differential SCSI-bus. */ - esp->diff = 0; - - dma_clear(esp); - esp_initialize(esp); - - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use); - esps_running = esps_in_use; - return esps_in_use; - } - } - return 0; - - err_unmap: - z_iounmap((void *)address); - err_unregister: - scsi_unregister (esp->ehost); - err_release: - release_mem_region(z->resource.start+FASTLANE_ESP_ADDR, - sizeof(struct ESP_regs)); - return 0; -} - - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Since the Fastlane DMA is fully dedicated to the ESP chip, - * the number of bytes sent (to the ESP chip) equals the number - * of bytes in the FIFO - there is no buffering in the DMA controller. - * XXXX Do I read this right? It is from host to ESP, right? - */ - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - unsigned long sz = sp->SCp.this_residual; - if(sz > 0xfffc) - sz = 0xfffc; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ - ESPLOG(("esp%d: dma -- cond_reg<%02x>\n", - esp->esp_id, ((struct fastlane_dma_registers *) - (esp->dregs))->cond_reg)); - ESPLOG(("intreq:<%04x>, intena:<%04x>\n", - amiga_custom.intreqr, amiga_custom.intenar)); -} - -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct fastlane_dma_registers *dregs = - (struct fastlane_dma_registers *) (esp->dregs); - unsigned long *t; - - cache_clear(addr, length); - - dma_clear(esp); - - t = (unsigned long *)((addr & 0x00ffffff) + esp->edev); - - dregs->clear_strobe = 0; - *t = addr; - - ctrl_data = (ctrl_data & FASTLANE_DMA_MASK) | FASTLANE_DMA_ENABLE; - dregs->ctrl_reg = ctrl_data; -} - -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct fastlane_dma_registers *dregs = - (struct fastlane_dma_registers *) (esp->dregs); - unsigned long *t; - - cache_push(addr, length); - - dma_clear(esp); - - t = (unsigned long *)((addr & 0x00ffffff) + (esp->edev)); - - dregs->clear_strobe = 0; - *t = addr; - - ctrl_data = ((ctrl_data & FASTLANE_DMA_MASK) | - FASTLANE_DMA_ENABLE | - FASTLANE_DMA_WRITE); - dregs->ctrl_reg = ctrl_data; -} - - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(esp->irq); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(esp->irq); -} - -static void dma_irq_exit(struct NCR_ESP *esp) -{ - struct fastlane_dma_registers *dregs = - (struct fastlane_dma_registers *) (esp->dregs); - - dregs->ctrl_reg = ctrl_data & ~(FASTLANE_DMA_EDI|FASTLANE_DMA_ESI); -#ifdef __mc68000__ - nop(); -#endif - dregs->ctrl_reg = ctrl_data; -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - struct fastlane_dma_registers *dregs = - (struct fastlane_dma_registers *) (esp->dregs); - unsigned char dma_status; - - dma_status = dregs->cond_reg; - - if(dma_status & FASTLANE_DMA_IACT) - return 0; /* not our IRQ */ - - /* Return non-zero if ESP requested IRQ */ - return ( -#ifndef NODMAIRQ - (dma_status & FASTLANE_DMA_CREQ) && -#endif - (!(dma_status & FASTLANE_DMA_MINT)) && - (esp_read(((struct ESP_regs *) (esp->eregs))->esp_status) & ESP_STAT_INTR)); -} - -static void dma_led_off(struct NCR_ESP *esp) -{ - ctrl_data &= ~FASTLANE_DMA_LED; - ((struct fastlane_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data; -} - -static void dma_led_on(struct NCR_ESP *esp) -{ - ctrl_data |= FASTLANE_DMA_LED; - ((struct fastlane_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data; -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - return ((amiga_custom.intenar) & IF_PORTS); -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - /* On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } -} - -#define HOSTS_C - -int fastlane_esp_release(struct Scsi_Host *instance) -{ -#ifdef MODULE - unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev; - esp_deallocate((struct NCR_ESP *)instance->hostdata); - esp_release(); - release_mem_region(address, sizeof(struct ESP_regs)); - free_irq(IRQ_AMIGA_PORTS, esp_intr); -#endif - return 1; -} - - -static struct scsi_host_template driver_template = { - .proc_name = "esp-fastlane", - .proc_info = esp_proc_info, - .name = "Fastlane SCSI", - .detect = fastlane_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = fastlane_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING -}; - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c deleted file mode 100644 index bcb49021b7e2..000000000000 --- a/drivers/scsi/mac_esp.c +++ /dev/null @@ -1,751 +0,0 @@ -/* - * 68k mac 53c9[46] scsi driver - * - * copyright (c) 1998, David Weis weisd3458@uni.edu - * - * debugging on Quadra 800 and 660AV Michael Schmitz, Dave Kilzer 7/98 - * - * based loosely on cyber_esp.c - */ - -/* these are unused for now */ -#define myreadl(addr) (*(volatile unsigned int *) (addr)) -#define mywritel(b, addr) ((*(volatile unsigned int *) (addr)) = (b)) - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "scsi.h" -#include -#include "NCR53C9x.h" - -#include - -#include -#include -#include -#include -#include - -#include - -#include - -/* #define DEBUG_MAC_ESP */ - -extern void esp_handle(struct NCR_ESP *esp); -extern void mac_esp_intr(int irq, void *dev_id); - -static int dma_bytes_sent(struct NCR_ESP * esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP * esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP * esp); -static void dma_init_read(struct NCR_ESP * esp, char * vaddress, int length); -static void dma_init_write(struct NCR_ESP * esp, char * vaddress, int length); -static void dma_ints_off(struct NCR_ESP * esp); -static void dma_ints_on(struct NCR_ESP * esp); -static int dma_irq_p(struct NCR_ESP * esp); -static int dma_irq_p_quick(struct NCR_ESP * esp); -static void dma_led_off(struct NCR_ESP * esp); -static void dma_led_on(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP * esp, __u32 addr, int count, int write); -static void dma_setup_quick(struct NCR_ESP * esp, __u32 addr, int count, int write); - -static int esp_dafb_dma_irq_p(struct NCR_ESP * espdev); -static int esp_iosb_dma_irq_p(struct NCR_ESP * espdev); - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are transferred to the ESP chip - * via PIO. - */ - -static int esp_initialized = 0; - -static int setup_num_esps = -1; -static int setup_disconnect = -1; -static int setup_nosync = -1; -static int setup_can_queue = -1; -static int setup_cmd_per_lun = -1; -static int setup_sg_tablesize = -1; -#ifdef SUPPORT_TAGS -static int setup_use_tagged_queuing = -1; -#endif -static int setup_hostid = -1; - -/* - * Experimental ESP inthandler; check macints.c to make sure dev_id is - * set up properly! - */ - -void mac_esp_intr(int irq, void *dev_id) -{ - struct NCR_ESP *esp = (struct NCR_ESP *) dev_id; - int irq_p = 0; - - /* Handle the one ESP interrupt showing at this IRQ level. */ - if(((esp)->irq & 0xff) == irq) { - /* - * Debug .. - */ - irq_p = esp->dma_irq_p(esp); - printk("mac_esp: irq_p %x current %p disconnected %p\n", - irq_p, esp->current_SC, esp->disconnected_SC); - - /* - * Mac: if we're here, it's an ESP interrupt for sure! - */ - if((esp->current_SC || esp->disconnected_SC)) { - esp->dma_ints_off(esp); - - ESPIRQ(("I%d(", esp->esp_id)); - esp_handle(esp); - ESPIRQ((")")); - - esp->dma_ints_on(esp); - } - } -} - -/* - * Debug hooks; use for playing with the interrupt flag testing and interrupt - * acknowledge on the various machines - */ - -void scsi_esp_polled(int irq, void *dev_id) -{ - if (esp_initialized == 0) - return; - - mac_esp_intr(irq, dev_id); -} - -void fake_intr(int irq, void *dev_id) -{ -#ifdef DEBUG_MAC_ESP - printk("mac_esp: got irq\n"); -#endif - - mac_esp_intr(irq, dev_id); -} - -irqreturn_t fake_drq(int irq, void *dev_id) -{ - printk("mac_esp: got drq\n"); - return IRQ_HANDLED; -} - -#define DRIVER_SETUP - -/* - * Function : mac_esp_setup(char *str) - * - * Purpose : booter command line initialization of the overrides array, - * - * Inputs : str - parameters, separated by commas. - * - * Currently unused in the new driver; need to add settable parameters to the - * detect function. - * - */ - -static int __init mac_esp_setup(char *str) { -#ifdef DRIVER_SETUP - /* Format of mac53c9x parameter is: - * mac53c9x=,,,,,,, - * Negative values mean don't change. - */ - - char *this_opt; - long opt; - - this_opt = strsep (&str, ","); - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - if (opt >= 0 && opt <= 2) - setup_num_esps = opt; - else if (opt > 2) - printk( "mac_esp_setup: invalid number of hosts %ld !\n", opt ); - - this_opt = strsep (&str, ","); - } - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - if (opt > 0) - setup_disconnect = opt; - - this_opt = strsep (&str, ","); - } - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - if (opt >= 0) - setup_nosync = opt; - - this_opt = strsep (&str, ","); - } - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - if (opt > 0) - setup_can_queue = opt; - - this_opt = strsep (&str, ","); - } - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - if (opt > 0) - setup_cmd_per_lun = opt; - - this_opt = strsep (&str, ","); - } - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - if (opt >= 0) { - setup_sg_tablesize = opt; - /* Must be <= SG_ALL (255) */ - if (setup_sg_tablesize > SG_ALL) - setup_sg_tablesize = SG_ALL; - } - - this_opt = strsep (&str, ","); - } - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - /* Must be between 0 and 7 */ - if (opt >= 0 && opt <= 7) - setup_hostid = opt; - else if (opt > 7) - printk( "mac_esp_setup: invalid host ID %ld !\n", opt); - - this_opt = strsep (&str, ","); - } -#ifdef SUPPORT_TAGS - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - if (opt >= 0) - setup_use_tagged_queuing = !!opt; - } -#endif -#endif - return 1; -} - -__setup("mac53c9x=", mac_esp_setup); - - -/* - * ESP address 'detection' - */ - -unsigned long get_base(int chip_num) -{ - /* - * using the chip_num and mac model, figure out where the - * chips are mapped - */ - - unsigned long io_base = 0x50f00000; - unsigned int second_offset = 0x402; - unsigned long scsi_loc = 0; - - switch (macintosh_config->scsi_type) { - - /* 950, 900, 700 */ - case MAC_SCSI_QUADRA2: - scsi_loc = io_base + 0xf000 + ((chip_num == 0) ? 0 : second_offset); - break; - - /* av's */ - case MAC_SCSI_QUADRA3: - scsi_loc = io_base + 0x18000 + ((chip_num == 0) ? 0 : second_offset); - break; - - /* most quadra/centris models are like this */ - case MAC_SCSI_QUADRA: - scsi_loc = io_base + 0x10000; - break; - - default: - printk("mac_esp: get_base: hit default!\n"); - scsi_loc = io_base + 0x10000; - break; - - } /* switch */ - - printk("mac_esp: io base at 0x%lx\n", scsi_loc); - - return scsi_loc; -} - -/* - * Model dependent ESP setup - */ - -int mac_esp_detect(struct scsi_host_template * tpnt) -{ - int quick = 0; - int chipnum, chipspresent = 0; -#if 0 - unsigned long timeout; -#endif - - if (esp_initialized > 0) - return -ENODEV; - - /* what do we have in this machine... */ - if (MACHW_PRESENT(MAC_SCSI_96)) { - chipspresent ++; - } - - if (MACHW_PRESENT(MAC_SCSI_96_2)) { - chipspresent ++; - } - - /* number of ESPs present ? */ - if (setup_num_esps >= 0) { - if (chipspresent >= setup_num_esps) - chipspresent = setup_num_esps; - else - printk("mac_esp_detect: num_hosts detected %d setup %d \n", - chipspresent, setup_num_esps); - } - - /* TODO: add disconnect / nosync flags */ - - /* setup variables */ - tpnt->can_queue = - (setup_can_queue > 0) ? setup_can_queue : 7; - tpnt->cmd_per_lun = - (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : 1; - tpnt->sg_tablesize = - (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_ALL; - - if (setup_hostid >= 0) - tpnt->this_id = setup_hostid; - else { - /* use 7 as default */ - tpnt->this_id = 7; - } - -#ifdef SUPPORT_TAGS - if (setup_use_tagged_queuing < 0) - setup_use_tagged_queuing = DEFAULT_USE_TAGGED_QUEUING; -#endif - - for (chipnum = 0; chipnum < chipspresent; chipnum ++) { - struct NCR_ESP * esp; - - esp = esp_allocate(tpnt, NULL, 0); - esp->eregs = (struct ESP_regs *) get_base(chipnum); - - esp->dma_irq_p = &esp_dafb_dma_irq_p; - if (chipnum == 0) { - - if (macintosh_config->scsi_type == MAC_SCSI_QUADRA) { - /* most machines except those below :-) */ - quick = 1; - esp->dma_irq_p = &esp_iosb_dma_irq_p; - } else if (macintosh_config->scsi_type == MAC_SCSI_QUADRA3) { - /* mostly av's */ - quick = 0; - } else { - /* q950, 900, 700 */ - quick = 1; - out_be32(0xf9800024, 0x1d1); - esp->dregs = (void *) 0xf9800024; - } - - } else { /* chipnum */ - - quick = 1; - out_be32(0xf9800028, 0x1d1); - esp->dregs = (void *) 0xf9800028; - - } /* chipnum == 0 */ - - /* use pio for command bytes; pio for message/data: TBI */ - esp->do_pio_cmds = 1; - - /* Set the command buffer */ - esp->esp_command = (volatile unsigned char*) cmd_buffer; - esp->esp_command_dvma = (__u32) cmd_buffer; - - /* various functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = NULL; - esp->dma_init_write = NULL; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - - esp->dma_ports_p = &dma_ports_p; - - - /* Optional functions */ - esp->dma_barrier = NULL; - esp->dma_drain = NULL; - esp->dma_invalidate = NULL; - esp->dma_irq_entry = NULL; - esp->dma_irq_exit = NULL; - esp->dma_led_on = NULL; - esp->dma_led_off = NULL; - esp->dma_poll = NULL; - esp->dma_reset = NULL; - - /* SCSI chip speed */ - /* below esp->cfreq = 40000000; */ - - - if (quick) { - /* 'quick' means there's handshake glue logic like in the 5380 case */ - esp->dma_setup = &dma_setup_quick; - } else { - esp->dma_setup = &dma_setup; - } - - if (chipnum == 0) { - - esp->irq = IRQ_MAC_SCSI; - - request_irq(IRQ_MAC_SCSI, esp_intr, 0, "Mac ESP SCSI", esp->ehost); -#if 0 /* conflicts with IOP ADB */ - request_irq(IRQ_MAC_SCSIDRQ, fake_drq, 0, "Mac ESP DRQ", esp->ehost); -#endif - - if (macintosh_config->scsi_type == MAC_SCSI_QUADRA) { - esp->cfreq = 16500000; - } else { - esp->cfreq = 25000000; - } - - - } else { /* chipnum == 1 */ - - esp->irq = IRQ_MAC_SCSIDRQ; -#if 0 /* conflicts with IOP ADB */ - request_irq(IRQ_MAC_SCSIDRQ, esp_intr, 0, "Mac ESP SCSI 2", esp->ehost); -#endif - - esp->cfreq = 25000000; - - } - - if (quick) { - printk("esp: using quick version\n"); - } - - printk("esp: addr at 0x%p\n", esp->eregs); - - esp->scsi_id = 7; - esp->diff = 0; - - esp_initialize(esp); - - } /* for chipnum */ - - if (chipspresent) - printk("\nmac_esp: %d esp controllers found\n", chipspresent); - - esp_initialized = chipspresent; - - return chipspresent; -} - -static int mac_esp_release(struct Scsi_Host *shost) -{ - if (shost->irq) - free_irq(shost->irq, NULL); - if (shost->io_port && shost->n_io_port) - release_region(shost->io_port, shost->n_io_port); - scsi_unregister(shost); - return 0; -} - -/* - * I've been wondering what this is supposed to do, for some time. Talking - * to Allen Briggs: These machines have an extra register someplace where the - * DRQ pin of the ESP can be monitored. That isn't useful for determining - * anything else (such as reselect interrupt or other magic) though. - * Maybe make the semantics should be changed like - * if (esp->current_SC) - * ... check DRQ flag ... - * else - * ... disconnected, check pending VIA interrupt ... - * - * There's a problem with using the dabf flag or mac_irq_pending() here: both - * seem to return 1 even though no interrupt is currently pending, resulting - * in esp_exec_cmd() holding off the next command, and possibly infinite loops - * in esp_intr(). - * Short term fix: just use esp_status & ESP_STAT_INTR here, as long as we - * use simple PIO. The DRQ status will be important when implementing pseudo - * DMA mode (set up ESP transfer count, return, do a batch of bytes in PIO or - * 'hardware handshake' mode upon DRQ). - * If you plan on changing this (i.e. to save the esp_status register access in - * favor of a VIA register access or a shadow register for the IFR), make sure - * to try a debug version of this first to monitor what registers would be a good - * indicator of the ESP interrupt. - */ - -static int esp_dafb_dma_irq_p(struct NCR_ESP * esp) -{ - unsigned int ret; - int sreg = esp_read(esp->eregs->esp_status); - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: esp_dafb_dma_irq_p dafb %d irq %d\n", - readl(esp->dregs), mac_irq_pending(IRQ_MAC_SCSI)); -#endif - - sreg &= ESP_STAT_INTR; - - /* - * maybe working; this is essentially what's used for iosb_dma_irq_p - */ - if (sreg) - return 1; - else - return 0; - - /* - * didn't work ... - */ -#if 0 - if (esp->current_SC) - ret = readl(esp->dregs) & 0x200; - else if (esp->disconnected_SC) - ret = 1; /* sreg ?? */ - else - ret = mac_irq_pending(IRQ_MAC_SCSI); - - return(ret); -#endif - -} - -/* - * See above: testing mac_irq_pending always returned 8 (SCSI IRQ) regardless - * of the actual ESP status. - */ - -static int esp_iosb_dma_irq_p(struct NCR_ESP * esp) -{ - int ret = mac_irq_pending(IRQ_MAC_SCSI) || mac_irq_pending(IRQ_MAC_SCSIDRQ); - int sreg = esp_read(esp->eregs->esp_status); - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_irq_p drq %d irq %d sreg %x curr %p disc %p\n", - mac_irq_pending(IRQ_MAC_SCSIDRQ), mac_irq_pending(IRQ_MAC_SCSI), - sreg, esp->current_SC, esp->disconnected_SC); -#endif - - sreg &= ESP_STAT_INTR; - - if (sreg) - return (sreg); - else - return 0; -} - -/* - * This seems to be OK for PIO at least ... usually 0 after PIO. - */ - -static int dma_bytes_sent(struct NCR_ESP * esp, int fifo_count) -{ - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma bytes sent = %x\n", fifo_count); -#endif - - return fifo_count; -} - -/* - * dma_can_transfer is used to switch between DMA and PIO, if DMA (pseudo) - * is ever implemented. Returning 0 here will use PIO. - */ - -static int dma_can_transfer(struct NCR_ESP * esp, Scsi_Cmnd * sp) -{ - unsigned long sz = sp->SCp.this_residual; -#if 0 /* no DMA yet; make conditional */ - if (sz > 0x10000000) { - sz = 0x10000000; - } - printk("mac_esp: dma can transfer = 0lx%x\n", sz); -#else - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: pio to transfer = %ld\n", sz); -#endif - - sz = 0; -#endif - return sz; -} - -/* - * Not yet ... - */ - -static void dma_dump_state(struct NCR_ESP * esp) -{ -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_dump_state: called\n"); -#endif -#if 0 - ESPLOG(("esp%d: dma -- cond_reg<%02x>\n", - esp->esp_id, ((struct mac_dma_registers *) - (esp->dregs))->cond_reg)); -#endif -} - -/* - * DMA setup: should be used to set up the ESP transfer count for pseudo - * DMA transfers; need a DRQ transfer function to do the actual transfer - */ - -static void dma_init_read(struct NCR_ESP * esp, char * vaddress, int length) -{ - printk("mac_esp: dma_init_read\n"); -} - - -static void dma_init_write(struct NCR_ESP * esp, char * vaddress, int length) -{ - printk("mac_esp: dma_init_write\n"); -} - - -static void dma_ints_off(struct NCR_ESP * esp) -{ - disable_irq(esp->irq); -} - - -static void dma_ints_on(struct NCR_ESP * esp) -{ - enable_irq(esp->irq); -} - -/* - * generic dma_irq_p(), unused - */ - -static int dma_irq_p(struct NCR_ESP * esp) -{ - int i = esp_read(esp->eregs->esp_status); - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_irq_p status %d\n", i); -#endif - - return (i & ESP_STAT_INTR); -} - -static int dma_irq_p_quick(struct NCR_ESP * esp) -{ - /* - * Copied from iosb_dma_irq_p() - */ - int ret = mac_irq_pending(IRQ_MAC_SCSI) || mac_irq_pending(IRQ_MAC_SCSIDRQ); - int sreg = esp_read(esp->eregs->esp_status); - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_irq_p drq %d irq %d sreg %x curr %p disc %p\n", - mac_irq_pending(IRQ_MAC_SCSIDRQ), mac_irq_pending(IRQ_MAC_SCSI), - sreg, esp->current_SC, esp->disconnected_SC); -#endif - - sreg &= ESP_STAT_INTR; - - if (sreg) - return (sreg); - else - return 0; - -} - -static void dma_led_off(struct NCR_ESP * esp) -{ -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_led_off: called\n"); -#endif -} - - -static void dma_led_on(struct NCR_ESP * esp) -{ -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_led_on: called\n"); -#endif -} - - -static int dma_ports_p(struct NCR_ESP * esp) -{ - return 0; -} - - -static void dma_setup(struct NCR_ESP * esp, __u32 addr, int count, int write) -{ - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_setup\n"); -#endif - - if (write) { - dma_init_read(esp, (char *) addr, count); - } else { - dma_init_write(esp, (char *) addr, count); - } -} - - -static void dma_setup_quick(struct NCR_ESP * esp, __u32 addr, int count, int write) -{ -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_setup_quick\n"); -#endif -} - -static struct scsi_host_template driver_template = { - .proc_name = "mac_esp", - .name = "Mac 53C9x SCSI", - .detect = mac_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = mac_esp_release, - .info = esp_info, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/oktagon_esp.c b/drivers/scsi/oktagon_esp.c deleted file mode 100644 index 8e5eadbd5c51..000000000000 --- a/drivers/scsi/oktagon_esp.c +++ /dev/null @@ -1,606 +0,0 @@ -/* - * Oktagon_esp.c -- Driver for bsc Oktagon - * - * Written by Carsten Pluntke 1998 - * - * Based on cyber_esp.c - */ - - -#if defined(CONFIG_AMIGA) || defined(CONFIG_APUS) -#define USE_BOTTOM_HALF -#endif - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#include "scsi.h" -#include -#include "NCR53C9x.h" - -#include -#include -#include -#include - -#ifdef USE_BOTTOM_HALF -#include -#include -#endif - -/* The controller registers can be found in the Z2 config area at these - * offsets: - */ -#define OKTAGON_ESP_ADDR 0x03000 -#define OKTAGON_DMA_ADDR 0x01000 - - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static void dma_led_off(struct NCR_ESP *esp); -static void dma_led_on(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); - -static void dma_irq_exit(struct NCR_ESP *esp); -static void dma_invalidate(struct NCR_ESP *esp); - -static void dma_mmu_get_scsi_one(struct NCR_ESP *,Scsi_Cmnd *); -static void dma_mmu_get_scsi_sgl(struct NCR_ESP *,Scsi_Cmnd *); -static void dma_mmu_release_scsi_one(struct NCR_ESP *,Scsi_Cmnd *); -static void dma_mmu_release_scsi_sgl(struct NCR_ESP *,Scsi_Cmnd *); -static void dma_advance_sg(Scsi_Cmnd *); -static int oktagon_notify_reboot(struct notifier_block *this, unsigned long code, void *x); - -#ifdef USE_BOTTOM_HALF -static void dma_commit(struct work_struct *unused); - -long oktag_to_io(long *paddr, long *addr, long len); -long oktag_from_io(long *addr, long *paddr, long len); - -static DECLARE_WORK(tq_fake_dma, dma_commit); - -#define DMA_MAXTRANSFER 0x8000 - -#else - -/* - * No bottom half. Use transfer directly from IRQ. Find a narrow path - * between too much IRQ overhead and clogging the IRQ for too long. - */ - -#define DMA_MAXTRANSFER 0x1000 - -#endif - -static struct notifier_block oktagon_notifier = { - oktagon_notify_reboot, - NULL, - 0 -}; - -static long *paddress; -static long *address; -static long len; -static long dma_on; -static int direction; -static struct NCR_ESP *current_esp; - - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are trasfered to the ESP chip - * via PIO. - */ - -/***************************************************************** Detection */ -int oktagon_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct zorro_dev *z = NULL; - unsigned long address; - struct ESP_regs *eregs; - - while ((z = zorro_find_device(ZORRO_PROD_BSC_OKTAGON_2008, z))) { - unsigned long board = z->resource.start; - if (request_mem_region(board+OKTAGON_ESP_ADDR, - sizeof(struct ESP_regs), "NCR53C9x")) { - /* - * It is a SCSI controller. - * Hardwire Host adapter to SCSI ID 7 - */ - - address = (unsigned long)ZTWO_VADDR(board); - eregs = (struct ESP_regs *)(address + OKTAGON_ESP_ADDR); - - /* This line was 5 lines lower */ - esp = esp_allocate(tpnt, (void *)board + OKTAGON_ESP_ADDR, 0); - - /* we have to shift the registers only one bit for oktagon */ - esp->shift = 1; - - esp_write(eregs->esp_cfg1, (ESP_CONFIG1_PENABLE | 7)); - udelay(5); - if (esp_read(eregs->esp_cfg1) != (ESP_CONFIG1_PENABLE | 7)) - return 0; /* Bail out if address did not hold data */ - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = 0; - esp->dma_invalidate = &dma_invalidate; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = &dma_irq_exit; - esp->dma_led_on = &dma_led_on; - esp->dma_led_off = &dma_led_off; - esp->dma_poll = 0; - esp->dma_reset = 0; - - esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one; - esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl; - esp->dma_mmu_release_scsi_one = &dma_mmu_release_scsi_one; - esp->dma_mmu_release_scsi_sgl = &dma_mmu_release_scsi_sgl; - esp->dma_advance_sg = &dma_advance_sg; - - /* SCSI chip speed */ - /* Looking at the quartz of the SCSI board... */ - esp->cfreq = 25000000; - - /* The DMA registers on the CyberStorm are mapped - * relative to the device (i.e. in the same Zorro - * I/O block). - */ - esp->dregs = (void *)(address + OKTAGON_DMA_ADDR); - - paddress = (long *) esp->dregs; - - /* ESP register base */ - esp->eregs = eregs; - - /* Set the command buffer */ - esp->esp_command = (volatile unsigned char*) cmd_buffer; - - /* Yes, the virtual address. See below. */ - esp->esp_command_dvma = (__u32) cmd_buffer; - - esp->irq = IRQ_AMIGA_PORTS; - request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, - "BSC Oktagon SCSI", esp->ehost); - - /* Figure out our scsi ID on the bus */ - esp->scsi_id = 7; - - /* We don't have a differential SCSI-bus. */ - esp->diff = 0; - - esp_initialize(esp); - - printk("ESP_Oktagon Driver 1.1" -#ifdef USE_BOTTOM_HALF - " [BOTTOM_HALF]" -#else - " [IRQ]" -#endif - " registered.\n"); - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps,esps_in_use); - esps_running = esps_in_use; - current_esp = esp; - register_reboot_notifier(&oktagon_notifier); - return esps_in_use; - } - } - return 0; -} - - -/* - * On certain configurations the SCSI equipment gets confused on reboot, - * so we have to reset it then. - */ - -static int -oktagon_notify_reboot(struct notifier_block *this, unsigned long code, void *x) -{ - struct NCR_ESP *esp; - - if((code == SYS_DOWN || code == SYS_HALT) && (esp = current_esp)) - { - esp_bootup_reset(esp,esp->eregs); - udelay(500); /* Settle time. Maybe unnecessary. */ - } - return NOTIFY_DONE; -} - - - -#ifdef USE_BOTTOM_HALF - - -/* - * The bsc Oktagon controller has no real DMA, so we have to do the 'DMA - * transfer' in the interrupt (Yikes!) or use a bottom half to not to clutter - * IRQ's for longer-than-good. - * - * FIXME - * BIG PROBLEM: 'len' is usually the buffer length, not the expected length - * of the data. So DMA may finish prematurely, further reads lead to - * 'machine check' on APUS systems (don't know about m68k systems, AmigaOS - * deliberately ignores the bus faults) and a normal copy-loop can't - * be exited prematurely just at the right moment by the dma_invalidate IRQ. - * So do it the hard way, write an own copier in assembler and - * catch the exception. - * -- Carsten - */ - - -static void dma_commit(struct work_struct *unused) -{ - long wait,len2,pos; - struct NCR_ESP *esp; - - ESPDATA(("Transfer: %ld bytes, Address 0x%08lX, Direction: %d\n", - len,(long) address,direction)); - dma_ints_off(current_esp); - - pos = 0; - wait = 1; - if(direction) /* write? (memory to device) */ - { - while(len > 0) - { - len2 = oktag_to_io(paddress, address+pos, len); - if(!len2) - { - if(wait > 1000) - { - printk("Expedited DMA exit (writing) %ld\n",len); - break; - } - mdelay(wait); - wait *= 2; - } - pos += len2; - len -= len2*sizeof(long); - } - } else { - while(len > 0) - { - len2 = oktag_from_io(address+pos, paddress, len); - if(!len2) - { - if(wait > 1000) - { - printk("Expedited DMA exit (reading) %ld\n",len); - break; - } - mdelay(wait); - wait *= 2; - } - pos += len2; - len -= len2*sizeof(long); - } - } - - /* to make esp->shift work */ - esp=current_esp; - -#if 0 - len2 = (esp_read(current_esp->eregs->esp_tclow) & 0xff) | - ((esp_read(current_esp->eregs->esp_tcmed) & 0xff) << 8); - - /* - * Uh uh. If you see this, len and transfer count registers were out of - * sync. That means really serious trouble. - */ - - if(len2) - printk("Eeeek!! Transfer count still %ld!\n",len2); -#endif - - /* - * Normally we just need to exit and wait for the interrupt to come. - * But at least one device (my Microtek ScanMaker 630) regularly mis- - * calculates the bytes it should send which is really ugly because - * it locks up the SCSI bus if not accounted for. - */ - - if(!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR)) - { - long len = 100; - long trash[10]; - - /* - * Interrupt bit was not set. Either the device is just plain lazy - * so we give it a 10 ms chance or... - */ - while(len-- && (!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR))) - udelay(100); - - - if(!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR)) - { - /* - * So we think that the transfer count is out of sync. Since we - * have all we want we are happy and can ditch the trash. - */ - - len = DMA_MAXTRANSFER; - - while(len-- && (!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR))) - oktag_from_io(trash,paddress,2); - - if(!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR)) - { - /* - * Things really have gone wrong. If we leave the system in that - * state, the SCSI bus is locked forever. I hope that this will - * turn the system in a more or less running state. - */ - printk("Device is bolixed, trying bus reset...\n"); - esp_bootup_reset(current_esp,current_esp->eregs); - } - } - } - - ESPDATA(("Transfer_finale: do_data_finale should come\n")); - - len = 0; - dma_on = 0; - dma_ints_on(current_esp); -} - -#endif - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Since the CyberStorm DMA is fully dedicated to the ESP chip, - * the number of bytes sent (to the ESP chip) equals the number - * of bytes in the FIFO - there is no buffering in the DMA controller. - * XXXX Do I read this right? It is from host to ESP, right? - */ - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - unsigned long sz = sp->SCp.this_residual; - if(sz > DMA_MAXTRANSFER) - sz = DMA_MAXTRANSFER; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ -} - -/* - * What the f$@& is this? - * - * Some SCSI devices (like my Microtek ScanMaker 630 scanner) want to transfer - * more data than requested. How much? Dunno. So ditch the bogus data into - * the sink, hoping the device will advance to the next phase sooner or later. - * - * -- Carsten - */ - -static long oktag_eva_buffer[16]; /* The data sink */ - -static void oktag_check_dma(void) -{ - struct NCR_ESP *esp; - - esp=current_esp; - if(!len) - { - address = oktag_eva_buffer; - len = 2; - /* esp_do_data sets them to zero like len */ - esp_write(current_esp->eregs->esp_tclow,2); - esp_write(current_esp->eregs->esp_tcmed,0); - } -} - -static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length) -{ - /* Zorro is noncached, everything else done using processor. */ - /* cache_clear(addr, length); */ - - if(dma_on) - panic("dma_init_read while dma process is initialized/running!\n"); - direction = 0; - address = (long *) vaddress; - current_esp = esp; - len = length; - oktag_check_dma(); - dma_on = 1; -} - -static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length) -{ - /* cache_push(addr, length); */ - - if(dma_on) - panic("dma_init_write while dma process is initialized/running!\n"); - direction = 1; - address = (long *) vaddress; - current_esp = esp; - len = length; - oktag_check_dma(); - dma_on = 1; -} - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(esp->irq); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(esp->irq); -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - /* It's important to check the DMA IRQ bit in the correct way! */ - return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR); -} - -static void dma_led_off(struct NCR_ESP *esp) -{ -} - -static void dma_led_on(struct NCR_ESP *esp) -{ -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - return ((amiga_custom.intenar) & IF_PORTS); -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - /* On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } -} - -/* - * IRQ entry when DMA transfer is ready to be started - */ - -static void dma_irq_exit(struct NCR_ESP *esp) -{ -#ifdef USE_BOTTOM_HALF - if(dma_on) - { - schedule_work(&tq_fake_dma); - } -#else - while(len && !dma_irq_p(esp)) - { - if(direction) - *paddress = *address++; - else - *address++ = *paddress; - len -= (sizeof(long)); - } - len = 0; - dma_on = 0; -#endif -} - -/* - * IRQ entry when DMA has just finished - */ - -static void dma_invalidate(struct NCR_ESP *esp) -{ -} - -/* - * Since the processor does the data transfer we have to use the custom - * mmu interface to pass the virtual address, not the physical. - */ - -void dma_mmu_get_scsi_one(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - sp->SCp.ptr = - sp->request_buffer; -} - -void dma_mmu_get_scsi_sgl(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - sp->SCp.ptr = sg_virt(sp->SCp.buffer); -} - -void dma_mmu_release_scsi_one(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ -} - -void dma_mmu_release_scsi_sgl(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ -} - -void dma_advance_sg(Scsi_Cmnd *sp) -{ - sp->SCp.ptr = sg_virt(sp->SCp.buffer); -} - - -#define HOSTS_C - -int oktagon_esp_release(struct Scsi_Host *instance) -{ -#ifdef MODULE - unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev; - esp_release(); - release_mem_region(address, sizeof(struct ESP_regs)); - free_irq(IRQ_AMIGA_PORTS, esp_intr); - unregister_reboot_notifier(&oktagon_notifier); -#endif - return 1; -} - - -static struct scsi_host_template driver_template = { - .proc_name = "esp-oktagon", - .proc_info = &esp_proc_info, - .name = "BSC Oktagon SCSI", - .detect = oktagon_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = oktagon_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/oktagon_io.S b/drivers/scsi/oktagon_io.S deleted file mode 100644 index 8a7340b02707..000000000000 --- a/drivers/scsi/oktagon_io.S +++ /dev/null @@ -1,194 +0,0 @@ -/* -*- mode: asm -*- - * Due to problems while transferring data I've put these routines as assembly - * code. - * Since I'm no PPC assembler guru, the code is just the assembler version of - -int oktag_to_io(long *paddr,long *addr,long len) -{ - long *addr2 = addr; - for(len=(len+sizeof(long)-1)/sizeof(long);len--;) - *paddr = *addr2++; - return addr2 - addr; -} - -int oktag_from_io(long *addr,long *paddr,long len) -{ - long *addr2 = addr; - for(len=(len+sizeof(long)-1)/sizeof(long);len--;) - *addr2++ = *paddr; - return addr2 - addr; -} - - * assembled using gcc -O2 -S, with two exception catch points where data - * is moved to/from the IO register. - */ - - -#ifdef CONFIG_APUS - - .file "oktagon_io.c" - -gcc2_compiled.: -/* - .section ".text" -*/ - .align 2 - .globl oktag_to_io - .type oktag_to_io,@function -oktag_to_io: - addi 5,5,3 - srwi 5,5,2 - cmpwi 1,5,0 - mr 9,3 - mr 3,4 - addi 5,5,-1 - bc 12,6,.L3 -.L5: - cmpwi 1,5,0 - lwz 0,0(3) - addi 3,3,4 - addi 5,5,-1 -exp1: stw 0,0(9) - bc 4,6,.L5 -.L3: -ret1: subf 3,4,3 - srawi 3,3,2 - blr -.Lfe1: - .size oktag_to_io,.Lfe1-oktag_to_io - .align 2 - .globl oktag_from_io - .type oktag_from_io,@function -oktag_from_io: - addi 5,5,3 - srwi 5,5,2 - cmpwi 1,5,0 - mr 9,3 - addi 5,5,-1 - bc 12,6,.L9 -.L11: - cmpwi 1,5,0 -exp2: lwz 0,0(4) - addi 5,5,-1 - stw 0,0(3) - addi 3,3,4 - bc 4,6,.L11 -.L9: -ret2: subf 3,9,3 - srawi 3,3,2 - blr -.Lfe2: - .size oktag_from_io,.Lfe2-oktag_from_io - .ident "GCC: (GNU) egcs-2.90.29 980515 (egcs-1.0.3 release)" - -/* - * Exception table. - * Second longword shows where to jump when an exception at the addr the first - * longword is pointing to is caught. - */ - -.section __ex_table,"a" - .align 2 -oktagon_except: - .long exp1,ret1 - .long exp2,ret2 - -#else - -/* -The code which follows is for 680x0 based assembler and is meant for -Linux/m68k. It was created by cross compiling the code using the -instructions given above. I then added the four labels used in the -exception handler table at the bottom of this file. -- Kevin -*/ - -#ifdef CONFIG_AMIGA - - .file "oktagon_io.c" - .version "01.01" -gcc2_compiled.: -.text - .align 2 -.globl oktag_to_io - .type oktag_to_io,@function -oktag_to_io: - link.w %a6,#0 - move.l %d2,-(%sp) - move.l 8(%a6),%a1 - move.l 12(%a6),%d1 - move.l %d1,%a0 - move.l 16(%a6),%d0 - addq.l #3,%d0 - lsr.l #2,%d0 - subq.l #1,%d0 - moveq.l #-1,%d2 - cmp.l %d0,%d2 - jbeq .L3 -.L5: -exp1: - move.l (%a0)+,(%a1) - dbra %d0,.L5 - clr.w %d0 - subq.l #1,%d0 - jbcc .L5 -.L3: -ret1: - move.l %a0,%d0 - sub.l %d1,%d0 - asr.l #2,%d0 - move.l -4(%a6),%d2 - unlk %a6 - rts - -.Lfe1: - .size oktag_to_io,.Lfe1-oktag_to_io - .align 2 -.globl oktag_from_io - .type oktag_from_io,@function -oktag_from_io: - link.w %a6,#0 - move.l %d2,-(%sp) - move.l 8(%a6),%d1 - move.l 12(%a6),%a1 - move.l %d1,%a0 - move.l 16(%a6),%d0 - addq.l #3,%d0 - lsr.l #2,%d0 - subq.l #1,%d0 - moveq.l #-1,%d2 - cmp.l %d0,%d2 - jbeq .L9 -.L11: -exp2: - move.l (%a1),(%a0)+ - dbra %d0,.L11 - clr.w %d0 - subq.l #1,%d0 - jbcc .L11 -.L9: -ret2: - move.l %a0,%d0 - sub.l %d1,%d0 - asr.l #2,%d0 - move.l -4(%a6),%d2 - unlk %a6 - rts -.Lfe2: - .size oktag_from_io,.Lfe2-oktag_from_io - .ident "GCC: (GNU) 2.7.2.1" - -/* - * Exception table. - * Second longword shows where to jump when an exception at the addr the first - * longword is pointing to is caught. - */ - -.section __ex_table,"a" - .align 2 -oktagon_except: - .long exp1,ret1 - .long exp2,ret2 - -#endif -#endif -- 2.30.2