From 630c3ff8c3d554054229b8c1c3d3a2b9465ffa64 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 20 Apr 2020 11:07:23 -0700 Subject: [PATCH] dt-bindings: net: mdio: Make descriptions more general A number of descriptions assume a PHY device, but since this binding describes a MDIO bus which can have different kinds of MDIO devices attached to it, rephrase some descriptions to be more general in that regard. Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/mdio.yaml | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index 37b9579b5651..d6a3bf8550eb 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -31,13 +31,13 @@ properties: maxItems: 1 description: The phandle and specifier for the GPIO that controls the RESET - lines of all PHYs on that MDIO bus. + lines of all devices on that MDIO bus. reset-delay-us: description: - RESET pulse width in microseconds. It applies to all PHY devices - and must therefore be appropriately determined based on all PHY - requirements (maximum value of all per-PHY RESET pulse widths). + RESET pulse width in microseconds. It applies to all MDIO devices + and must therefore be appropriately determined based on all devices + requirements (maximum value of all per-device RESET pulse widths). clock-frequency: description: @@ -60,7 +60,7 @@ patternProperties: minimum: 0 maximum: 31 description: - The ID number for the PHY. + The ID number for the device. broken-turn-around: $ref: /schemas/types.yaml#definitions/flag -- 2.30.2