From 627e41f12551d2d726361679e3b0940e95cfd7d0 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Tue, 18 Apr 2017 13:49:37 +0800 Subject: [PATCH] ARM: dts: at91: Add dts files for at91sam9260ek/9g20ek The device tree source files of at91sam9g20ek and at91sam9260ek boards are copied from the Linux v4.10, do the changes below. - Fix the build error for the usb0 node. - Add the reg property for the pinctrl node. - Move the gpio (pioA, pioB, pioC ...) nodes as the pinctrl's slibling nodes, instead of the child nodes. - Add the "u-boot,dm-pre-reloc" property for the dbgu node are used in board_init_f stage. - Add the clk pinctrl of the mmc0 node. - Fix the compilation warnings. Signed-off-by: Wenyou Yang Reviewed-by: Simon Glass --- arch/arm/dts/Makefile | 5 + arch/arm/dts/at91sam9260.dtsi | 149 +++++++++------- arch/arm/dts/at91sam9260ek.dts | 215 +++++++++++++++++++++++ arch/arm/dts/at91sam9g20.dtsi | 4 +- arch/arm/dts/at91sam9g20ek.dts | 29 ++++ arch/arm/dts/at91sam9g20ek_2mmc.dts | 56 ++++++ arch/arm/dts/at91sam9g20ek_common.dtsi | 227 +++++++++++++++++++++++++ 7 files changed, 617 insertions(+), 68 deletions(-) create mode 100644 arch/arm/dts/at91sam9260ek.dts create mode 100644 arch/arm/dts/at91sam9g20ek.dts create mode 100644 arch/arm/dts/at91sam9g20ek_2mmc.dts create mode 100644 arch/arm/dts/at91sam9g20ek_common.dtsi diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 129e341705..5a22fd321e 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -352,6 +352,11 @@ dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \ keystone-k2e-evm.dtb \ keystone-k2g-evm.dtb +dtb-$(CONFIG_TARGET_AT91SAM9260EK) += \ + at91sam9260ek.dtb \ + at91sam9g20ek.dtb \ + at91sam9g20ek_2mmc.dtb + dtb-$(CONFIG_TARGET_AT91SAM9M10G45EK) += at91sam9m10g45ek.dtb dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \ diff --git a/arch/arm/dts/at91sam9260.dtsi b/arch/arm/dts/at91sam9260.dtsi index d4884dd1c2..0f25e336da 100644 --- a/arch/arm/dts/at91sam9260.dtsi +++ b/arch/arm/dts/at91sam9260.dtsi @@ -79,12 +79,14 @@ #address-cells = <1>; #size-cells = <1>; ranges; + u-boot,dm-pre-reloc; apb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + u-boot,dm-pre-reloc; aic: interrupt-controller@fffff000 { #interrupt-cells = <3>; @@ -107,6 +109,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; + u-boot,dm-pre-reloc; main_osc: main_osc { compatible = "atmel,at91rm9200-clk-main-osc"; @@ -134,7 +137,7 @@ clocks = <&slow_rc_osc>, <&slow_xtal>; }; - plla: pllack { + plla: pllack@0 { compatible = "atmel,at91rm9200-clk-pll"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_LOCKA>; @@ -146,7 +149,7 @@ <150000000 240000000 2 1>; }; - pllb: pllbck { + pllb: pllbck@1 { compatible = "atmel,at91rm9200-clk-pll"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_LOCKB>; @@ -164,6 +167,7 @@ clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; atmel,clk-output-range = <0 105000000>; atmel,clk-divisors = <1 2 4 0>; + u-boot,dm-pre-reloc; }; usb: usbck { @@ -180,13 +184,13 @@ interrupt-parent = <&pmc>; clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; - prog0: prog0 { + prog0: prog@0 { #clock-cells = <0>; reg = <0>; interrupts = ; }; - prog1: prog1 { + prog1: prog@1 { #clock-cells = <0>; reg = <1>; interrupts = ; @@ -198,25 +202,25 @@ #address-cells = <1>; #size-cells = <0>; - uhpck: uhpck { + uhpck: uhpck@6 { #clock-cells = <0>; reg = <6>; clocks = <&usb>; }; - udpck: udpck { + udpck: udpck@7 { #clock-cells = <0>; reg = <7>; clocks = <&usb>; }; - pck0: pck0 { + pck0: pck0@8 { #clock-cells = <0>; reg = <8>; clocks = <&prog0>; }; - pck1: pck1 { + pck1: pck1@9 { #clock-cells = <0>; reg = <9>; clocks = <&prog1>; @@ -228,128 +232,132 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&mck>; + u-boot,dm-pre-reloc; - pioA_clk: pioA_clk { + pioA_clk: pioA_clk@2 { #clock-cells = <0>; reg = <2>; + u-boot,dm-pre-reloc; }; - pioB_clk: pioB_clk { + pioB_clk: pioB_clk@3 { #clock-cells = <0>; reg = <3>; + u-boot,dm-pre-reloc; }; - pioC_clk: pioC_clk { + pioC_clk: pioC_clk@4 { #clock-cells = <0>; reg = <4>; + u-boot,dm-pre-reloc; }; - adc_clk: adc_clk { + adc_clk: adc_clk@5 { #clock-cells = <0>; reg = <5>; }; - usart0_clk: usart0_clk { + usart0_clk: usart0_clk@6 { #clock-cells = <0>; reg = <6>; }; - usart1_clk: usart1_clk { + usart1_clk: usart1_clk@7 { #clock-cells = <0>; reg = <7>; }; - usart2_clk: usart2_clk { + usart2_clk: usart2_clk@8 { #clock-cells = <0>; reg = <8>; }; - mci0_clk: mci0_clk { + mci0_clk: mci0_clk@9 { #clock-cells = <0>; reg = <9>; }; - udc_clk: udc_clk { + udc_clk: udc_clk@10 { #clock-cells = <0>; reg = <10>; }; - twi0_clk: twi0_clk { + twi0_clk: twi0_clk@11 { reg = <11>; #clock-cells = <0>; }; - spi0_clk: spi0_clk { + spi0_clk: spi0_clk@12 { #clock-cells = <0>; reg = <12>; }; - spi1_clk: spi1_clk { + spi1_clk: spi1_clk@13 { #clock-cells = <0>; reg = <13>; }; - ssc0_clk: ssc0_clk { + ssc0_clk: ssc0_clk@14 { #clock-cells = <0>; reg = <14>; }; - tc0_clk: tc0_clk { + tc0_clk: tc0_clk@17 { #clock-cells = <0>; reg = <17>; }; - tc1_clk: tc1_clk { + tc1_clk: tc1_clk@18 { #clock-cells = <0>; reg = <18>; }; - tc2_clk: tc2_clk { + tc2_clk: tc2_clk@19 { #clock-cells = <0>; reg = <19>; }; - ohci_clk: ohci_clk { + ohci_clk: ohci_clk@20 { #clock-cells = <0>; reg = <20>; }; - macb0_clk: macb0_clk { + macb0_clk: macb0_clk@21 { #clock-cells = <0>; reg = <21>; }; - isi_clk: isi_clk { + isi_clk: isi_clk@22 { #clock-cells = <0>; reg = <22>; }; - usart3_clk: usart3_clk { + usart3_clk: usart3_clk@23 { #clock-cells = <0>; reg = <23>; }; - uart0_clk: uart0_clk { + uart0_clk: uart0_clk@24 { #clock-cells = <0>; reg = <24>; }; - uart1_clk: uart1_clk { + uart1_clk: uart1_clk@25 { #clock-cells = <0>; reg = <25>; }; - tc3_clk: tc3_clk { + tc3_clk: tc3_clk@26 { #clock-cells = <0>; reg = <26>; }; - tc4_clk: tc4_clk { + tc4_clk: tc4_clk@27 { #clock-cells = <0>; reg = <27>; }; - tc5_clk: tc5_clk { + tc5_clk: tc5_clk@28 { #clock-cells = <0>; reg = <28>; }; @@ -395,11 +403,51 @@ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioA_clk>; + u-boot,dm-pre-reloc; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioB_clk>; + u-boot,dm-pre-reloc; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioC_clk>; + u-boot,dm-pre-reloc; + }; + pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; ranges = <0xfffff400 0xfffff400 0x600>; + reg = <0xfffff400 0x200 /* pioA */ + 0xfffff600 0x200 /* pioB */ + 0xfffff800 0x200 /* pioC */ + >; atmel,mux-mask = < /* A B */ @@ -407,9 +455,11 @@ 0xffffffff 0x7fff3ccf /* pioB */ 0xffffffff 0x007fffff /* pioC */ >; + u-boot,dm-pre-reloc; /* shared pinctrl settings */ dbgu { + u-boot,dm-pre-reloc; pinctrl_dbgu: dbgu-0 { atmel,pins = ; }; }; - - pioA: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioA_clk>; - }; - - pioB: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x200>; - interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioB_clk>; - }; - - pioC: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x200>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioC_clk>; - }; }; dbgu: serial@fffff200 { diff --git a/arch/arm/dts/at91sam9260ek.dts b/arch/arm/dts/at91sam9260ek.dts new file mode 100644 index 0000000000..086c8eae1c --- /dev/null +++ b/arch/arm/dts/at91sam9260ek.dts @@ -0,0 +1,215 @@ +/* + * Device Tree file for Atmel at91sam9260 Evaluation Kit + * + * Copyright (C) 2016 Atmel, + * 2016 Nicolas Ferre + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "at91sam9260.dtsi" + +/ { + model = "Atmel at91sam9260ek"; + compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9"; + + chosen { + u-boot,dm-pre-reloc; + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_board_mmc0_slot1 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; + }; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + }; + + ssc0: ssc@fffbc000 { + status = "okay"; + pinctrl-0 = <&pinctrl_ssc0_tx>; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + spi0: spi@fffc8000 { + cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; + }; + + dbgu: serial@fffff200 { + u-boot,dm-pre-reloc; + status = "okay"; + }; + + pinctrl@fffff400 { + board { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + ; + }; + }; + }; + + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; + + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + status = "okay"; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + + gpbr: syscon@fffffd50 { + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + btn3 { + label = "Button 3"; + gpios = <&pioA 30 GPIO_ACTIVE_LOW>; + linux,code = <0x103>; + wakeup-source; + }; + + btn4 { + label = "Button 4"; + gpios = <&pioA 31 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + wakeup-source; + }; + }; + + i2c-gpio-0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + 24c512@50 { + compatible = "24c512"; + reg = <0x50>; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds1 { + label = "ds1"; + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + ds5 { + label = "ds5"; + gpios = <&pioA 6 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9g20.dtsi b/arch/arm/dts/at91sam9g20.dtsi index f593016181..e88d73ca8b 100644 --- a/arch/arm/dts/at91sam9g20.dtsi +++ b/arch/arm/dts/at91sam9g20.dtsi @@ -40,7 +40,7 @@ }; pmc: pmc@fffffc00 { - plla: pllack { + plla: pllack@0 { atmel,clk-input-range = <2000000 32000000>; atmel,pll-clk-output-ranges = <745000000 800000000 0 0>, <695000000 750000000 1 0>, @@ -52,7 +52,7 @@ <400000000 450000000 3 1>; }; - pllb: pllbck { + pllb: pllbck@1 { compatible = "atmel,at91sam9g20-clk-pllb"; atmel,clk-input-range = <2000000 32000000>; atmel,pll-clk-output-ranges = <30000000 100000000 0 0>; diff --git a/arch/arm/dts/at91sam9g20ek.dts b/arch/arm/dts/at91sam9g20ek.dts new file mode 100644 index 0000000000..bbfd753112 --- /dev/null +++ b/arch/arm/dts/at91sam9g20ek.dts @@ -0,0 +1,29 @@ +/* + * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD + * + * Licensed under GPLv2. + */ +/dts-v1/; +#include "at91sam9g20ek_common.dtsi" + +/ { + model = "Atmel at91sam9g20ek"; + compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9"; + + leds { + compatible = "gpio-leds"; + + ds1 { + label = "ds1"; + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + ds5 { + label = "ds5"; + gpios = <&pioA 6 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9g20ek_2mmc.dts b/arch/arm/dts/at91sam9g20ek_2mmc.dts new file mode 100644 index 0000000000..7ea83b6de8 --- /dev/null +++ b/arch/arm/dts/at91sam9g20ek_2mmc.dts @@ -0,0 +1,56 @@ +/* + * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD + * + * Licensed under GPLv2. + */ +/dts-v1/; +#include "at91sam9g20ek_common.dtsi" + +/ { + model = "Atmel at91sam9g20ek 2 mmc"; + compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9"; + + ahb { + apb{ + mmc0: mmc@fffa8000 { + /* clk already mux wuth slot0 */ + pinctrl-0 = < + &pinctrl_board_mmc0_slot0 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; + }; + }; + + pinctrl@fffff400 { + mmc0_slot0 { + pinctrl_board_mmc0_slot0: mmc0_slot0-board { + atmel,pins = + ; /* PC2 gpio CD pin pull up and deglitch */ + }; + }; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds1 { + label = "ds1"; + gpios = <&pioB 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + ds5 { + label = "ds5"; + gpios = <&pioB 8 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/dts/at91sam9g20ek_common.dtsi b/arch/arm/dts/at91sam9g20ek_common.dtsi new file mode 100644 index 0000000000..65ae099119 --- /dev/null +++ b/arch/arm/dts/at91sam9g20ek_common.dtsi @@ -0,0 +1,227 @@ +/* + * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD + * + * Licensed under GPLv2. + */ +#include "at91sam9g20.dtsi" + +/ { + chosen { + u-boot,dm-pre-reloc; + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + pinctrl@fffff400 { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = + ; /* PC1 periph B */ + }; + + }; + + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + ; /* PC9 gpio CD pin pull up and deglitch */ + }; + }; + }; + + dbgu: serial@fffff200 { + u-boot,dm-pre-reloc; + status = "okay"; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_board_mmc0_slot1 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; + }; + }; + + ssc0: ssc@fffbc000 { + status = "okay"; + pinctrl-0 = <&pinctrl_ssc0_tx>; + }; + + spi0: spi@fffc8000 { + cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; + }; + + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; + + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + status = "okay"; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + + gpbr: syscon@fffffd50 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + i2c-gpio-0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + 24c512@50 { + compatible = "24c512"; + reg = <0x50>; + }; + + wm8731: wm8731@1b { + compatible = "wm8731"; + reg = <0x1b>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + btn3 { + label = "Button 3"; + gpios = <&pioA 30 GPIO_ACTIVE_LOW>; + linux,code = <0x103>; + wakeup-source; + }; + + btn4 { + label = "Button 4"; + gpios = <&pioA 31 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + wakeup-source; + }; + }; + + sound { + compatible = "atmel,at91sam9g20ek-wm8731-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + + atmel,model = "wm8731 @ AT91SAMG20EK"; + + atmel,audio-routing = + "Ext Spk", "LHPOUT", + "Int Mic", "MICIN"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; +}; -- 2.30.2