From 61b57c4ab93a2dc6c7dd4e96e85543d2aafffe9c Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Mon, 12 Jan 2015 22:47:15 +0100 Subject: [PATCH] ppc4xx: remove AR405 board Signed-off-by: Matthias Fuchs --- arch/powerpc/cpu/ppc4xx/Kconfig | 4 - board/esd/ar405/Kconfig | 12 - board/esd/ar405/MAINTAINERS | 6 - board/esd/ar405/Makefile | 8 - board/esd/ar405/ar405.c | 394 --- board/esd/ar405/ar405.h | 28 - board/esd/ar405/flash.c | 85 - board/esd/ar405/fpgadata.c | 5500 ------------------------------- board/esd/ar405/fpgadata_xl30.c | 4872 --------------------------- configs/AR405_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/AR405.h | 253 -- 12 files changed, 1 insertion(+), 11165 deletions(-) delete mode 100644 board/esd/ar405/Kconfig delete mode 100644 board/esd/ar405/MAINTAINERS delete mode 100644 board/esd/ar405/Makefile delete mode 100644 board/esd/ar405/ar405.c delete mode 100644 board/esd/ar405/ar405.h delete mode 100644 board/esd/ar405/flash.c delete mode 100644 board/esd/ar405/fpgadata.c delete mode 100644 board/esd/ar405/fpgadata_xl30.c delete mode 100644 configs/AR405_defconfig delete mode 100644 include/configs/AR405.h diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig index 53e86606fd..43c8bf91f7 100644 --- a/arch/powerpc/cpu/ppc4xx/Kconfig +++ b/arch/powerpc/cpu/ppc4xx/Kconfig @@ -110,9 +110,6 @@ config TARGET_CATCENTER config TARGET_PPCHAMELEONEVB bool "Support PPChameleonEVB" -config TARGET_AR405 - bool "Support AR405" - config TARGET_ASH405 bool "Support ASH405" @@ -254,7 +251,6 @@ source "board/avnet/v5fx30teval/Kconfig" source "board/csb272/Kconfig" source "board/csb472/Kconfig" source "board/dave/PPChameleonEVB/Kconfig" -source "board/esd/ar405/Kconfig" source "board/esd/ash405/Kconfig" source "board/esd/cms700/Kconfig" source "board/esd/cpci2dp/Kconfig" diff --git a/board/esd/ar405/Kconfig b/board/esd/ar405/Kconfig deleted file mode 100644 index 4ad9d51922..0000000000 --- a/board/esd/ar405/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_AR405 - -config SYS_BOARD - default "ar405" - -config SYS_VENDOR - default "esd" - -config SYS_CONFIG_NAME - default "AR405" - -endif diff --git a/board/esd/ar405/MAINTAINERS b/board/esd/ar405/MAINTAINERS deleted file mode 100644 index be74ff7f6f..0000000000 --- a/board/esd/ar405/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -AR405 BOARD -M: Matthias Fuchs -S: Maintained -F: board/esd/ar405/ -F: include/configs/AR405.h -F: configs/AR405_defconfig diff --git a/board/esd/ar405/Makefile b/board/esd/ar405/Makefile deleted file mode 100644 index dd54f546a6..0000000000 --- a/board/esd/ar405/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = ar405.o flash.o ../common/misc.o diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c deleted file mode 100644 index d33aba4713..0000000000 --- a/board/esd/ar405/ar405.c +++ /dev/null @@ -1,394 +0,0 @@ -/* - * (C) Copyright 2001-2004 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include "ar405.h" -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -extern void lxt971_no_sleep(void); - -/* ------------------------------------------------------------------------- */ - -#if 0 -#define FPGA_DEBUG -#endif - -/* fpga configuration data - generated by bin2cc */ -const unsigned char fpgadata[] = { -#include "fpgadata.c" -}; - -const unsigned char fpgadata_xl30[] = { -#include "fpgadata_xl30.c" -}; - -/* - * include common fpga code (for esd boards) - */ -#include "../common/fpga.c" - - -int board_early_init_f (void) -{ - int index, len, i; - int status; - -#ifdef FPGA_DEBUG - /* set up serial port with default baudrate */ - (void) get_clocks (); - gd->baudrate = CONFIG_BAUDRATE; - serial_init (); - console_init_f (); -#endif - - /* - * Boot onboard FPGA - */ - /* first try 40er image */ - gd->board_type = 40; - status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata)); - if (status != 0) { - /* try xl30er image */ - gd->board_type = 30; - status = fpga_boot ((unsigned char *) fpgadata_xl30, sizeof (fpgadata_xl30)); - if (status != 0) { - /* booting FPGA failed */ -#ifndef FPGA_DEBUG - /* set up serial port with default baudrate */ - (void) get_clocks (); - gd->baudrate = CONFIG_BAUDRATE; - serial_init (); - console_init_f (); -#endif - printf ("\nFPGA: Booting failed "); - switch (status) { - case ERROR_FPGA_PRG_INIT_LOW: - printf ("(Timeout: INIT not low after asserting PROGRAM*)\n "); - break; - case ERROR_FPGA_PRG_INIT_HIGH: - printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n "); - break; - case ERROR_FPGA_PRG_DONE: - printf ("(Timeout: DONE not high after programming FPGA)\n "); - break; - } - - /* display infos on fpgaimage */ - index = 15; - for (i = 0; i < 4; i++) { - len = fpgadata[index]; - printf ("FPGA: %s\n", &(fpgadata[index + 1])); - index += len + 3; - } - putc ('\n'); - /* delayed reboot */ - for (i = 20; i > 0; i--) { - printf ("Rebooting in %2d seconds \r", i); - for (index = 0; index < 1000; index++) - udelay (1000); - } - putc ('\n'); - do_reset (NULL, 0, 0, NULL); - } - } - - /* - * IRQ 0-15 405GP internally generated; active high; level sensitive - * IRQ 16 405GP internally generated; active low; level sensitive - * IRQ 17-24 RESERVED - * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive - * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive - * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive - * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive - * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive - * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive - * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive - */ - mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr (UIC0ER, 0x00000000); /* disable all ints */ - mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ - mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */ - mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ - mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ - - out_be16((void *)0xf03000ec, 0x0fff); /* enable interrupts in fpga */ - - return 0; -} - -/* - * Check Board Identity: - */ -int checkboard (void) -{ - int index; - int len; - char str[64]; - int i = getenv_f("serial#", str, sizeof (str)); - const unsigned char *fpga; - - puts ("Board: "); - - if (i == -1) { - puts ("### No HW ID - assuming AR405"); - } else { - puts(str); - } - - puts ("\nFPGA: "); - - /* display infos on fpgaimage */ - if (gd->board_type == 30) { - fpga = fpgadata_xl30; - } else { - fpga = fpgadata; - } - index = 15; - for (i = 0; i < 4; i++) { - len = fpga[index]; - printf ("%s ", &(fpga[index + 1])); - index += len + 3; - } - - putc ('\n'); - - /* - * Disable sleep mode in LXT971 - */ - lxt971_no_sleep(); - - return 0; -} - - -#if 1 /* test-only: some internal test routines... */ -#define DIGEN ((void *)0xf03000b4) /* u8 */ -#define DIGOUT ((void *)0xf03000b0) /* u16 */ -#define DIGIN ((void *)0xf03000a0) /* u16 */ - -/* - * Some test routines - */ -int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int i; - int k; - int start; - int end; - - if (argc != 3) { - puts("Usage: digtest n_start n_end (digtest 0 7)\n"); - return 0; - } - - start = simple_strtol (argv[1], NULL, 10); - end = simple_strtol (argv[2], NULL, 10); - - /* - * Enable digital outputs - */ - out_8(DIGEN, 0x08); - - printf("\nStarting digital In-/Out Test from I/O %d to %d (Cntrl-C to abort)...\n", - start, end); - - /* - * Set outputs one by one - */ - for (;;) { - for (i=start; i<=end; i++) { - out_be16(DIGOUT, 0x0001 << i); - for (k=0; k<200; k++) - udelay(1000); - - if (in_be16(DIGIN) != (0x0001 << i)) { - printf("ERROR: OUT=0x%04X, IN=0x%04X\n", - 0x0001 << i, in_be16(DIGIN)); - return 0; - } - - /* Abort if ctrl-c was pressed */ - if (ctrlc()) { - puts("\nAbort\n"); - return 0; - } - } - } - - return 0; -} -U_BOOT_CMD( - digtest, 3, 1, do_digtest, - "Test digital in-/output", - "" -); - -#define ERROR_DELTA 256 - -struct io { - short val; - short dummy; -}; - -int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - short val; - int i; - int volt; - struct io *out; - struct io *in; - - out = (struct io *)0xf0300090; - in = (struct io *)0xf0300000; - - i = simple_strtol (argv[1], NULL, 10); - - volt = 0; - printf("Setting Channel %d to %dV...\n", i, volt); - out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10); - udelay(10000); - val = in_be16((void *)&(in[i*2].val)); - printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff); - if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) || - (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) { - printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA, - ((volt * 0x7fff) / 40) + ERROR_DELTA); - return -1; - } - val = in_be16((void *)&(in[i*2+1].val)); - printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff); - if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) || - (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) { - printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA, - ((volt * 0x7fff) / 40) + ERROR_DELTA); - return -1; - } - - volt = 5; - printf("Setting Channel %d to %dV...\n", i, volt); - out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10); - udelay(10000); - val = in_be16((void *)&(in[i*2].val)); - printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff); - if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) || - (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) { - printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA, - ((volt * 0x7fff) / 40) + ERROR_DELTA); - return -1; - } - val = in_be16((void *)&(in[i*2+1].val)); - printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff); - if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) || - (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) { - printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA, - ((volt * 0x7fff) / 40) + ERROR_DELTA); - return -1; - } - - volt = 10; - printf("Setting Channel %d to %dV...\n", i, volt); - out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10); - udelay(10000); - val = in_be16((void *)&(in[i*2].val)); - printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff); - if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) || - (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) { - printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA, - ((volt * 0x7fff) / 40) + ERROR_DELTA); - return -1; - } - val = in_be16((void *)&(in[i*2+1].val)); - printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff); - if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) || - (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) { - printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA, - ((volt * 0x7fff) / 40) + ERROR_DELTA); - return -1; - } - - printf("Channel %d OK!\n", i); - - return 0; -} -U_BOOT_CMD( - anatest, 2, 1, do_anatest, - "Test analog in-/output", - "" -); - - -int counter = 0; - -void cyclicInt(void *ptr) -{ - out_be16((void *)0xf03000e8, 0x0800); /* ack int */ - counter++; -} - - -int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong *incin; - int i; - - incin = (ulong *)0xf0300040; - - /* - * Clear inc counter - */ - out_be32((void *)&incin[0], 0); - out_be32((void *)&incin[1], 0); - out_be32((void *)&incin[2], 0); - out_be32((void *)&incin[3], 0); - - incin = (ulong *)0xf0300050; - - /* - * Inc a little - */ - for (i=0; i<10000; i++) { - switch (i & 0x03) { - case 0: - out_8(DIGEN, 0x02); - break; - case 1: - out_8(DIGEN, 0x03); - break; - case 2: - out_8(DIGEN, 0x01); - break; - case 3: - out_8(DIGEN, 0x00); - break; - } - udelay(10); - } - - printf("Inc 0 = %d\n", in_be32((void *)&incin[0])); - printf("Inc 1 = %d\n", in_be32((void *)&incin[1])); - printf("Inc 2 = %d\n", in_be32((void *)&incin[2])); - printf("Inc 3 = %d\n", in_be32((void *)&incin[3])); - - out_be16((void *)0xf03000e0, 0x0c80-1); /* set counter */ - out_be16((void *)0xf03000ec, - in_be16((void *)0xf03000ec) | 0x0800); /* enable int */ - irq_install_handler (30, (interrupt_handler_t *) cyclicInt, NULL); - printf("counter=%d\n", counter); - - return 0; -} -U_BOOT_CMD( - inctest, 3, 1, do_inctest, - "Test incremental encoder inputs", - "" -); -#endif diff --git a/board/esd/ar405/ar405.h b/board/esd/ar405/ar405.h deleted file mode 100644 index 75e7950bcd..0000000000 --- a/board/esd/ar405/ar405.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/**************************************************************************** - * FLASH Memory Map as used by TQ Monitor: - * - * Start Address Length - * +-----------------------+ 0x4000_0000 Start of Flash ----------------- - * | MON8xx code | 0x4000_0100 Reset Vector - * +-----------------------+ 0x400?_???? - * | (unused) | - * +-----------------------+ 0x4001_FF00 - * | Ethernet Addresses | 0x78 - * +-----------------------+ 0x4001_FF78 - * | (Reserved for MON8xx) | 0x44 - * +-----------------------+ 0x4001_FFBC - * | Lock Address | 0x04 - * +-----------------------+ 0x4001_FFC0 ^ - * | Hardware Information | 0x40 | MON8xx - * +=======================+ 0x4002_0000 (sector border) ----------------- - * | Autostart Header | | Applications - * | ... | v - * - *****************************************************************************/ diff --git a/board/esd/ar405/flash.c b/board/esd/ar405/flash.c deleted file mode 100644 index 23e81642e0..0000000000 --- a/board/esd/ar405/flash.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* - * include common flash code (for esd boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long * addr, flash_info_t * info); -static void flash_get_offsets (ulong base, flash_info_t * info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long size_b0; - int i; - uint pbcr; - unsigned long base_b0; - int size_val = 0; - - /* Init: no FLASHes known */ - for (i=0; i APC405 ppc4xx 405gpr - - Matthias Fuchs TASREG m68k mcf52x2 - - Matthias Fuchs A3000 powerpc mpc824x - - diff --git a/include/configs/AR405.h b/include/configs/AR405.h deleted file mode 100644 index 45dd46a41e..0000000000 --- a/include/configs/AR405.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - * (C) Copyright 2001-2004 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_AR405 1 /* ...on a AR405 board */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ - -#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ - -#define CONFIG_BOARD_TYPES 1 /* support board types */ - -#define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ - -#if 1 -#define CONFIG_BOOTCOMMAND "bootm fff00000" /* autoboot command */ -#else -#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */ -#endif - -#if 0 -#define CONFIG_BOOTARGS "root=/dev/nfs " \ - "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 " \ - "nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4" -#else -#define CONFIG_BOOTARGS "root=/dev/hda1 " \ - "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0" - -#endif - -#define CONFIG_PREBOOT /* enable preboot variable */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_ELF -#define CONFIG_CMD_MII -#undef CONFIG_CMD_NFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_BSP - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ - -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ - -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ -#define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() - -#define CONFIG_SYS_EXT_SERIAL_CLOCK 14745600 /* use external serial clock */ - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - /* resource configuration */ - -#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ - -#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/ - -#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0403 /* PCI Device ID: ARISTO405 */ -#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ -#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CONFIG_SYS_PCI_PTM2LA 0xfff00000 /* point to flash */ -#define CONFIG_SYS_PCI_PTM2MS 0xfff00001 /* 1MB, enable */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1) -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ -#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ -#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ -/* - * The following defines are added for buggy IOP480 byte interface. - * All other boards should use the standard values (CPCI405 etc.) - */ -#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ -#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ -#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */ -#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */ - -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */ - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - */ - -/* Memory Bank 0 (Flash Bank 0) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x92015480 -#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */ - -/* Memory Bank 1 (CAN0, 1, 2, 3) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x01000380 /* enable Ready, BEM=0 */ -#define CONFIG_SYS_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 2 (Expension Bus) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x01000280 /* disable Ready, BEM=0 */ -#define CONFIG_SYS_EBC_PB2CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 3 (16552) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x01000380 /* enable Ready, BEM=0 */ -#define CONFIG_SYS_EBC_PB3CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 4 (FPGA regs) initialization */ -#define CONFIG_SYS_EBC_PB4AP 0x01005380 /* enable Ready, BEM=0 */ -#define CONFIG_SYS_EBC_PB4CR 0xF031C000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=32bit */ - -/* Memory Bank 5 (Flash Bank 1/DUMMY) initialization */ -#define CONFIG_SYS_EBC_PB5AP 0x92015480 -#define CONFIG_SYS_EBC_PB5CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in data cache) - */ -#define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */ - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#endif /* __CONFIG_H */ -- 2.30.2