From 5fba273959d2143bd3b22b34c698ecbffa90d3f1 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Wed, 4 May 2016 12:47:16 -0700 Subject: [PATCH] staging: comedi: dt2811: simplify analog output range options The D/A ranges are not programmable. Currently this driver uses some configuration options to select the comedi_lrange for each channel. This is a bit messy and it requires the user to make sure the correct option value is used. The range information isn't used by the driver. The user space library uses it to convert between raw data values and physical units. If the user passed an incorrect option when attaching the driver the conversion will be incorrect. Simplify the analog output ranges by providing a range_table that contains all the possible output ranges. The user can then select the correct range when converting values. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/dt2811.c | 69 ++++++++++--------------- 1 file changed, 26 insertions(+), 43 deletions(-) diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c index 0512d7098927..6850eb8e669a 100644 --- a/drivers/staging/comedi/drivers/dt2811.c +++ b/drivers/staging/comedi/drivers/dt2811.c @@ -37,8 +37,14 @@ * 0 = [-5, 5] * 1 = [-2.5, 2.5] * 2 = [0, 5] - * [4] - D/A 0 range (same as A/D range) - * [5] - D/A 1 range (same as A/D range) + * [4] - D/A 0 range (deprecated, see below) + * [5] - D/A 1 range (deprecated, see below) + * + * Notes: + * - D/A ranges are not programmable. The AO subdevice has a range_table + * containing all the possible analog output ranges. Use the range + * that matches your board configuration to convert between data + * values and physical units. */ #include @@ -147,6 +153,23 @@ static const struct comedi_lrange range_dt2811_pgl_ai_5_bipolar = { } }; +/* + * The Analog Output range is set per-channel using jumpers on the board. + * + * DAC0 Jumpers DAC1 Jumpers + * Output Range W5 W6 W7 W8 W1 W2 W3 W4 + * -5V to +5V In Out In Out In Out In Out + * -2.5V to +2.5V In Out Out In In Out Out In + * 0 to +5V Out In Out In Out In Out In + */ +static const struct comedi_lrange dt2811_ao_ranges = { + 3, { + BIP_RANGE(5), /* default setting from factory */ + BIP_RANGE(2.5), + UNI_RANGE(5) + } +}; + #define TIMEOUT 10000 struct dt2811_board { @@ -164,16 +187,6 @@ struct dt2811_private { enum { adc_singleended, adc_diff, adc_pseudo_diff } adc_mux; - enum { - dac_bipolar_5, dac_bipolar_2_5, dac_unipolar_5 - } dac_range[2]; - const struct comedi_lrange *range_type_list[2]; -}; - -static const struct comedi_lrange *dac_range_types[] = { - &range_bipolar5, - &range_bipolar2_5, - &range_unipolar5 }; static int dt2811_ai_eoc(struct comedi_device *dev, @@ -294,34 +307,6 @@ static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it) devpriv->adc_mux = adc_singleended; break; } - switch (it->options[4]) { - case 0: - devpriv->dac_range[0] = dac_bipolar_5; - break; - case 1: - devpriv->dac_range[0] = dac_bipolar_2_5; - break; - case 2: - devpriv->dac_range[0] = dac_unipolar_5; - break; - default: - devpriv->dac_range[0] = dac_bipolar_5; - break; - } - switch (it->options[5]) { - case 0: - devpriv->dac_range[1] = dac_bipolar_5; - break; - case 1: - devpriv->dac_range[1] = dac_bipolar_2_5; - break; - case 2: - devpriv->dac_range[1] = dac_unipolar_5; - break; - default: - devpriv->dac_range[1] = dac_bipolar_5; - break; - } s = &dev->subdevices[0]; /* initialize the ADC subdevice */ @@ -349,9 +334,7 @@ static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it) s->subdev_flags = SDF_WRITABLE; s->n_chan = 2; s->maxdata = 0xfff; - s->range_table_list = devpriv->range_type_list; - devpriv->range_type_list[0] = dac_range_types[devpriv->dac_range[0]]; - devpriv->range_type_list[1] = dac_range_types[devpriv->dac_range[1]]; + s->range_table = &dt2811_ao_ranges; s->insn_write = dt2811_ao_insn_write; ret = comedi_alloc_subdev_readback(s); -- 2.30.2