From 5fac236a9703827666df452f093d2849625afd4d Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 6 Oct 2011 12:52:22 +0000 Subject: [PATCH] tegra2: Use new GPIO APIs in gpio_config_uart() ... rather than open-coding the register accesses. However, gpio_request() typically stores the "label" parameter in a global data structure. This causes problems when called from gpio_config_uart(), since the code is running before relocation. To solve this, pass a NULL string to gpio_request(), and modify gpio_request() not to touch the string if it's NULL. Signed-off-by: Stephen Warren Acked-by: Simon Glass Tested-by: Simon Glass Signed-off-by: Tom Warren --- board/nvidia/seaboard/seaboard.c | 18 ++---------------- drivers/gpio/tegra2_gpio.c | 6 ++++-- 2 files changed, 6 insertions(+), 18 deletions(-) diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index aa77f12ef5..7f2827b8be 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -37,23 +37,9 @@ */ static void gpio_config_uart_seaboard(void) { - int gp = GPIO_PI3; - struct gpio_ctlr *gpio = (struct gpio_ctlr *)NV_PA_GPIO_BASE; - struct gpio_ctlr_bank *bank = &gpio->gpio_bank[GPIO_BANK(gp)]; - u32 val; - /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */ - val = readl(&bank->gpio_config[GPIO_PORT(gp)]); - val |= 1 << GPIO_BIT(gp); - writel(val, &bank->gpio_config[GPIO_PORT(gp)]); - - val = readl(&bank->gpio_out[GPIO_PORT(gp)]); - val &= ~(1 << GPIO_BIT(gp)); - writel(val, &bank->gpio_out[GPIO_PORT(gp)]); - - val = readl(&bank->gpio_dir_out[GPIO_PORT(gp)]); - val |= 1 << GPIO_BIT(gp); - writel(val, &bank->gpio_dir_out[GPIO_PORT(gp)]); + gpio_request(GPIO_PI3, NULL); + gpio_direction_output(GPIO_PI3, 0); } void gpio_config_uart(void) diff --git a/drivers/gpio/tegra2_gpio.c b/drivers/gpio/tegra2_gpio.c index f686e80637..22669b6160 100644 --- a/drivers/gpio/tegra2_gpio.c +++ b/drivers/gpio/tegra2_gpio.c @@ -146,8 +146,10 @@ int gpio_request(int gp, const char *label) if (gp >= MAX_NUM_GPIOS) return -1; - strncpy(gpio_names[gp].name, label, GPIO_NAME_SIZE); - gpio_names[gp].name[GPIO_NAME_SIZE - 1] = '\0'; + if (label != NULL) { + strncpy(gpio_names[gp].name, label, GPIO_NAME_SIZE); + gpio_names[gp].name[GPIO_NAME_SIZE - 1] = '\0'; + } /* Configure as a GPIO */ set_config(gp, 1); -- 2.30.2