From 5fa7ac9c9cadd598a22c09660c270bdb92da1e91 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Wed, 29 Aug 2012 16:43:58 +0300 Subject: [PATCH] drm/i915: fix sdvo hotplug support check and activation The sdvo hotplug support check and activation has worked by coincidence for TMDS0. The boolean value returned by intel_sdvo_supports_hotplug() was masked with a bit shifted by device number, which also should have been one of SDVO_OUTPUT_* bits instead. Boolean true masked with 1 shifted by 0 just happened to match SDVO_OUTPUT_TMDS0... Get hotplug support as a bit mask, check the correct bits for support, and use the correct bits for activating hotplug support. Signed-off-by: Jani Nikula Reviewed-by: Simon Farnsworth Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 9a31211a60c6..6c9a85759bc3 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -97,7 +97,7 @@ struct intel_sdvo { /* * Hotplug activation bits for this device */ - uint8_t hotplug_active[2]; + uint16_t hotplug_active; /** * This is used to select the color range of RBG outputs in HDMI mode. @@ -1251,25 +1251,29 @@ static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct in return true; } -static int intel_sdvo_supports_hotplug(struct intel_sdvo *intel_sdvo) +static uint16_t intel_sdvo_get_hotplug_support(struct intel_sdvo *intel_sdvo) { struct drm_device *dev = intel_sdvo->base.base.dev; - u8 response[2]; + uint16_t hotplug; /* HW Erratum: SDVO Hotplug is broken on all i945G chips, there's noise * on the line. */ if (IS_I945G(dev) || IS_I945GM(dev)) - return false; + return 0; + + if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, + &hotplug, sizeof(hotplug))) + return 0; - return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, - &response, 2) && response[0]; + return hotplug; } static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder) { struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base); - intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &intel_sdvo->hotplug_active, 2); + intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, + &intel_sdvo->hotplug_active, 2); } static bool @@ -2061,17 +2065,18 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device) intel_connector = &intel_sdvo_connector->base; connector = &intel_connector->base; - if (intel_sdvo_supports_hotplug(intel_sdvo) & (1 << device)) { + if (intel_sdvo_get_hotplug_support(intel_sdvo) & + intel_sdvo_connector->output_flag) { connector->polled = DRM_CONNECTOR_POLL_HPD; - intel_sdvo->hotplug_active[0] |= 1 << device; + intel_sdvo->hotplug_active |= intel_sdvo_connector->output_flag; /* Some SDVO devices have one-shot hotplug interrupts. * Ensure that they get re-enabled when an interrupt happens. */ intel_encoder->hot_plug = intel_sdvo_enable_hotplug; intel_sdvo_enable_hotplug(intel_encoder); - } - else + } else { connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; + } encoder->encoder_type = DRM_MODE_ENCODER_TMDS; connector->connector_type = DRM_MODE_CONNECTOR_DVID; @@ -2587,7 +2592,7 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) /* Only enable the hotplug irq if we need it, to work around noisy * hotplug lines. */ - if (intel_sdvo->hotplug_active[0]) + if (intel_sdvo->hotplug_active) dev_priv->hotplug_supported_mask |= hotplug_mask; intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg); -- 2.30.2