From 5d24f455c182d5116dd5db8e1dc501115ecc9c2c Mon Sep 17 00:00:00 2001 From: Joe Burmeister Date: Mon, 13 May 2019 11:23:57 +0100 Subject: [PATCH] tty: max310x: Fix external crystal register setup The datasheet states: Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking (crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable clocking Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal oscillator. When using an external clock source at XIN, CrystalEn must be set low. The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not. This was required to make the MAX3107 with an external crystal on our board able to send or receive data. Signed-off-by: Joe Burmeister Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/max310x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 450ba6d7996c..e5aebbf5f302 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -581,7 +581,7 @@ static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s, } /* Configure clock source */ - clksrc = xtal ? MAX310X_CLKSRC_CRYST_BIT : MAX310X_CLKSRC_EXTCLK_BIT; + clksrc = MAX310X_CLKSRC_EXTCLK_BIT | (xtal ? MAX310X_CLKSRC_CRYST_BIT : 0); /* Configure PLL */ if (pllcfg) { -- 2.30.2