From 5bdd1f4a1daf398042203b72430891dfc40c0fa6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 9 Aug 2013 11:41:56 +0100 Subject: [PATCH] usb: misc: usb3503: Add USB3503A to the compatible list There are no software visible differences that I am aware of but in case any are discovered allow the DTS to specify exactly which device is present. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/usb3503.txt | 2 +- drivers/usb/misc/usb3503.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index 8c5be48b43c8..cd60f7e4eb57 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -1,7 +1,7 @@ SMSC USB3503 High-Speed Hub Controller Required properties: -- compatible: Should be "smsc,usb3503". +- compatible: Should be "smsc,usb3503" or "smsc,usb3503a". - reg: Specifies the i2c slave address, it should be 0x08. - connect-gpios: Should specify GPIO for connect. - disabled-ports: Should specify the ports unused. diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index 8f5dff20dcb4..da45ed971332 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -272,6 +272,7 @@ MODULE_DEVICE_TABLE(i2c, usb3503_id); #ifdef CONFIG_OF static const struct of_device_id usb3503_of_match[] = { { .compatible = "smsc,usb3503", }, + { .compatible = "smsc,usb3503a", }, {}, }; MODULE_DEVICE_TABLE(of, usb3503_of_match); -- 2.30.2