From 5b9bf512ca93a46d370215966d21208ca2e7dc64 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Sun, 25 Nov 2018 18:15:22 -0600 Subject: [PATCH] dt-bindings: phy: add cpsw port interface mode selection phy bindings Add CPSW Port's Interface Mode Selection PHY (phy-gmii-sel) DT Bindings Cc: Kishon Vijay Abraham I Cc: Tony Lindgren Acked-by: Tony Lindgren Signed-off-by: Grygorii Strashko Signed-off-by: Kishon Vijay Abraham I --- .../bindings/phy/ti-phy-gmii-sel.txt | 68 +++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt diff --git a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt new file mode 100644 index 000000000000..50ce9ae0f7a5 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt @@ -0,0 +1,68 @@ +CPSW Port's Interface Mode Selection PHY Tree Bindings +----------------------------------------------- + +TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports +two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces. +The interface mode is selected by configuring the MII mode selection register(s) +(GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and +bit fields placement in SCM are different between SoCs while fields meaning +is the same. + +--------------+ + +-------------------------------+ |SCM | + | CPSW | | +---------+ | + | +--------------------------------+gmii_sel | | + | | | | +---------+ | + | +----v---+ +--------+ | +--------------+ + | |Port 1..<--+-->GMII/MII<-------> + | | | | | | | + | +--------+ | +--------+ | + | | | + | | +--------+ | + | | | RMII <-------> + | +--> | | + | | +--------+ | + | | | + | | +--------+ | + | | | RGMII <-------> + | +--> | | + | +--------+ | + +-------------------------------+ + +CPSW Port's Interface Mode Selection PHY describes MII interface mode between +CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration. + +CPSW Port's Interface Mode Selection PHY device should defined as child device +of SCM node (scm_conf) and can be attached to each CPSW port node using standard +PHY bindings (See phy/phy-bindings.txt). + +Required properties: +- compatible : Should be "ti,am3352-phy-gmii-sel" for am335x platform + "ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform + "ti,am43xx-phy-gmii-sel" for am43xx platform + "ti,dm814-phy-gmii-sel" for dm814x platform +- reg : Address and length of the register set for the device +- #phy-cells : must be 2. + cell 1 - CPSW port number (starting from 1) + cell 2 - RMII refclk mode + +Examples: + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,am3352-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <2>; + }; + + mac: ethernet@4a100000 { + compatible = "ti,am335x-cpsw","ti,cpsw"; + ... + + cpsw_emac0: slave@4a100200 { + ... + phys = <&phy_gmii_sel 1 1>; + }; + + cpsw_emac1: slave@4a100300 { + ... + phys = <&phy_gmii_sel 2 1>; + }; + }; -- 2.30.2