From 5b3b215b624fa8f5dcecfb6743f7626bafcbc307 Mon Sep 17 00:00:00 2001 From: Xenia Ragiadakou Date: Thu, 23 May 2013 05:14:48 +0300 Subject: [PATCH] rtl8192u: replace __FUNCTION__ with __func__ in r8192U_core.c This patch fixes the following checkpatch warning: WARNING: __func__ should be used instead of gcc specific __FUNCTION__ Signed-off-by: Xenia Ragiadakou Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192u/r8192U_core.c | 64 +++++++++++++------------- 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index b8eee943c763..a1eedc004ac8 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -209,7 +209,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv *priv) max_chan = 14; } else { - RT_TRACE(COMP_ERR, "unknown rf chip, can't set channel map in function:%s()\n", __FUNCTION__); + RT_TRACE(COMP_ERR, "unknown rf chip, can't set channel map in function:%s()\n", __func__); } if (ChannelPlan[channel_plan].Len != 0) { // Clear old channel map @@ -813,7 +813,7 @@ void rtl8192_set_chan(struct net_device *dev, short ch) { struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); // u32 tx; - RT_TRACE(COMP_CH, "=====>%s()====ch:%d\n", __FUNCTION__, ch); + RT_TRACE(COMP_CH, "=====>%s()====ch:%d\n", __func__, ch); priv->chan = ch; /* this hack should avoid frame TX during channel setting*/ @@ -1080,7 +1080,7 @@ static void rtl8192_rx_isr(struct urb *urb) skb = dev_alloc_skb(RX_URB_SIZE); if (unlikely(!skb)) { usb_free_urb(urb); - printk("%s():can,t alloc skb\n", __FUNCTION__); + printk("%s():can,t alloc skb\n", __func__); /* TODO check rx queue length and refill *somewhere* */ return; } @@ -1748,7 +1748,7 @@ unsigned int txqueue2outpipe(struct r8192_priv *priv, unsigned int tx_queue) { if (tx_queue >= 9) { - RT_TRACE(COMP_ERR, "%s():Unknown queue ID!!!\n", __FUNCTION__); + RT_TRACE(COMP_ERR, "%s():Unknown queue ID!!!\n", __func__); return 0x04; } return priv->txqueue_to_outpipemap[tx_queue]; @@ -2446,7 +2446,7 @@ static int rtl8192_qos_association_resp(struct r8192_priv *priv, spin_unlock_irqrestore(&priv->ieee80211->lock, flags); - RT_TRACE(COMP_QOS, "%s: network->flags = %d,%d\n", __FUNCTION__, network->flags, priv->ieee80211->current_network.qos_data.active); + RT_TRACE(COMP_QOS, "%s: network->flags = %d,%d\n", __func__, network->flags, priv->ieee80211->current_network.qos_data.active); if (set_qos_param == 1) queue_work(priv->priv_wq, &priv->qos_activate); @@ -2625,7 +2625,7 @@ void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode) wireless_mode = WIRELESS_MODE_B; } else{ - RT_TRACE(COMP_ERR, "%s(), No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", __FUNCTION__, bSupportMode); + RT_TRACE(COMP_ERR, "%s(), No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", __func__, bSupportMode); wireless_mode = WIRELESS_MODE_B; } } @@ -2811,12 +2811,12 @@ static void rtl8192_get_eeprom_size(struct net_device *dev) { u16 curCR = 0; struct r8192_priv *priv = ieee80211_priv(dev); - RT_TRACE(COMP_EPROM, "===========>%s()\n", __FUNCTION__); + RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__); curCR = read_nic_word_E(dev, EPROM_CMD); RT_TRACE(COMP_EPROM, "read from Reg EPROM_CMD(%x):%x\n", EPROM_CMD, curCR); //whether need I consider BIT5? priv->epromtype = (curCR & Cmd9346CR_9356SEL) ? EPROM_93c56 : EPROM_93c46; - RT_TRACE(COMP_EPROM, "<===========%s(), epromtype:%d\n", __FUNCTION__, priv->epromtype); + RT_TRACE(COMP_EPROM, "<===========%s(), epromtype:%d\n", __func__, priv->epromtype); } //used to swap endian. as ntohl & htonl are not necessary to swap endian, so use this instead. @@ -2833,7 +2833,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev) u8 bLoad_From_EEPOM = false; struct r8192_priv *priv = ieee80211_priv(dev); u16 tmpValue = 0; - RT_TRACE(COMP_EPROM, "===========>%s()\n", __FUNCTION__); + RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__); wEPROM_ID = eprom_read(dev, 0); //first read EEPROM ID out; RT_TRACE(COMP_EPROM, "EEPROM ID is 0x%x\n", wEPROM_ID); @@ -3066,7 +3066,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev) init_rate_adaptive(dev); //we need init DIG RATR table here again. - RT_TRACE(COMP_EPROM, "<===========%s()\n", __FUNCTION__); + RT_TRACE(COMP_EPROM, "<===========%s()\n", __func__); return; } @@ -3232,7 +3232,7 @@ bool rtl8192_adapter_start(struct net_device *dev) struct r8192_priv *priv = ieee80211_priv(dev); u32 dwRegRead = 0; bool init_status = true; - RT_TRACE(COMP_INIT, "====>%s()\n", __FUNCTION__); + RT_TRACE(COMP_INIT, "====>%s()\n", __func__); priv->Rf_Mode = RF_OP_By_SW_3wire; //for ASIC power on sequence write_nic_byte_E(dev, 0x5f, 0x80); @@ -3252,7 +3252,7 @@ bool rtl8192_adapter_start(struct net_device *dev) else if (priv->pFirmware->firmware_status == FW_STATUS_5_READY) dwRegRead |= CPU_GEN_FIRMWARE_RESET; else - RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __FUNCTION__, priv->pFirmware->firmware_status); + RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __func__, priv->pFirmware->firmware_status); write_nic_dword(dev, CPU_GEN, dwRegRead); //mdelay(30); @@ -3269,7 +3269,7 @@ bool rtl8192_adapter_start(struct net_device *dev) else if (priv->LoopbackMode == RTL819xU_MAC_LOOPBACK) dwRegRead |= CPU_CCK_LOOPBACK; else - RT_TRACE(COMP_ERR, "Serious error in %s(): wrong loopback mode setting(%d)\n", __FUNCTION__, priv->LoopbackMode); + RT_TRACE(COMP_ERR, "Serious error in %s(): wrong loopback mode setting(%d)\n", __func__, priv->LoopbackMode); write_nic_dword(dev, CPU_GEN, dwRegRead); @@ -3363,10 +3363,10 @@ bool rtl8192_adapter_start(struct net_device *dev) init_status = init_firmware(dev); if (!init_status) { - RT_TRACE(COMP_ERR, "ERR!!! %s(): Firmware download is failed\n", __FUNCTION__); + RT_TRACE(COMP_ERR, "ERR!!! %s(): Firmware download is failed\n", __func__); return init_status; } - RT_TRACE(COMP_INIT, "%s():after firmware download\n", __FUNCTION__); + RT_TRACE(COMP_INIT, "%s():after firmware download\n", __func__); // #ifdef TO_DO_LIST if (Adapter->ResetProgress == RESET_TYPE_NORESET) @@ -3405,7 +3405,7 @@ if (Adapter->ResetProgress == RESET_TYPE_NORESET) //config RF. if (priv->ResetProgress == RESET_TYPE_NORESET){ rtl8192_phy_RFConfig(dev); - RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __FUNCTION__); + RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __func__); } @@ -3500,7 +3500,7 @@ HalTxCheckStuck819xUsb( struct r8192_priv *priv = ieee80211_priv(dev); u16 RegTxCounter = read_nic_word(dev, 0x128); bool bStuck = FALSE; - RT_TRACE(COMP_RESET, "%s():RegTxCounter is %d,TxCounter is %d\n", __FUNCTION__, RegTxCounter, priv->TxCounter); + RT_TRACE(COMP_RESET, "%s():RegTxCounter is %d,TxCounter is %d\n", __func__, RegTxCounter, priv->TxCounter); if (priv->TxCounter == RegTxCounter) bStuck = TRUE; @@ -3564,7 +3564,7 @@ HalRxCheckStuck819xUsb(struct net_device *dev) struct r8192_priv *priv = ieee80211_priv(dev); bool bStuck = FALSE; static u8 rx_chk_cnt; - RT_TRACE(COMP_RESET, "%s(): RegRxCounter is %d,RxCounter is %d\n", __FUNCTION__, RegRxCounter, priv->RxCounter); + RT_TRACE(COMP_RESET, "%s(): RegRxCounter is %d,RxCounter is %d\n", __func__, RegRxCounter, priv->RxCounter); // If rssi is small, we should check rx for long time because of bad rx. // or maybe it will continuous silent reset every 2 seconds. rx_chk_cnt++; @@ -3689,7 +3689,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev) if (TxResetType == RESET_TYPE_NORMAL || RxResetType == RESET_TYPE_NORMAL) return RESET_TYPE_NORMAL; else if (TxResetType == RESET_TYPE_SILENT || RxResetType == RESET_TYPE_SILENT){ - RT_TRACE(COMP_RESET, "%s():silent reset\n", __FUNCTION__); + RT_TRACE(COMP_RESET, "%s():silent reset\n", __func__); return RESET_TYPE_SILENT; } else @@ -3868,12 +3868,12 @@ RESET_START: down(&priv->wx_sem); if (priv->up == 0) { - RT_TRACE(COMP_ERR, "%s():the driver is not up! return\n", __FUNCTION__); + RT_TRACE(COMP_ERR, "%s():the driver is not up! return\n", __func__); up(&priv->wx_sem); return; } priv->up = 0; - RT_TRACE(COMP_RESET, "%s():======>start to down the driver\n", __FUNCTION__); + RT_TRACE(COMP_RESET, "%s():======>start to down the driver\n", __func__); // if(!netif_queue_stopped(dev)) // netif_stop_queue(dev); @@ -3898,12 +3898,12 @@ RESET_START: printk("ieee->state is NOT LINKED\n"); ieee80211_softmac_stop_protocol(priv->ieee80211); } up(&priv->wx_sem); - RT_TRACE(COMP_RESET, "%s():<==========down process is finished\n", __FUNCTION__); + RT_TRACE(COMP_RESET, "%s():<==========down process is finished\n", __func__); //rtl8192_irq_disable(dev); - RT_TRACE(COMP_RESET, "%s():===========>start up the driver\n", __FUNCTION__); + RT_TRACE(COMP_RESET, "%s():===========>start up the driver\n", __func__); reset_status = _rtl8192_up(dev); - RT_TRACE(COMP_RESET, "%s():<===========up process is finished\n", __FUNCTION__); + RT_TRACE(COMP_RESET, "%s():<===========up process is finished\n", __func__); if (reset_status == -EAGAIN) { if (reset_times < 3) @@ -3913,7 +3913,7 @@ RESET_START: } else { - RT_TRACE(COMP_ERR, " ERR!!! %s(): Reset Failed!!\n", __FUNCTION__); + RT_TRACE(COMP_ERR, " ERR!!! %s(): Reset Failed!!\n", __func__); } } ieee->is_silent_reset = 1; @@ -4052,9 +4052,9 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work) { #ifdef TODO if (rfState == eRfOff) - RT_TRACE(COMP_ERR, "========>%s()\n", __FUNCTION__); + RT_TRACE(COMP_ERR, "========>%s()\n", __func__); #endif - printk("===>%s(): AP is power off,connect another one\n", __FUNCTION__); + printk("===>%s(): AP is power off,connect another one\n", __func__); // Dot11d_Reset(dev); priv->ieee80211->state = IEEE80211_ASSOCIATING; notify_wx_assoc_event(priv->ieee80211); @@ -4080,7 +4080,7 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work) (priv->bForcedSilentReset || (!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) // This is control by OID set in Pomelo { - RT_TRACE(COMP_RESET, "%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n", __FUNCTION__, priv->force_reset, priv->ResetProgress, priv->bForcedSilentReset, priv->bDisableNormalResetCheck, ResetType); + RT_TRACE(COMP_RESET, "%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n", __func__, priv->force_reset, priv->ResetProgress, priv->bForcedSilentReset, priv->bDisableNormalResetCheck, ResetType); rtl819x_ifsilentreset(dev); } priv->force_reset = false; @@ -4108,7 +4108,7 @@ int _rtl8192_up(struct net_device *dev) init_status = rtl8192_adapter_start(dev); if (!init_status) { - RT_TRACE(COMP_ERR, "ERR!!! %s(): initialization failed!\n", __FUNCTION__); + RT_TRACE(COMP_ERR, "ERR!!! %s(): initialization failed!\n", __func__); priv->up = priv->ieee80211->ieee_up = 0; return -EAGAIN; } @@ -4174,7 +4174,7 @@ int rtl8192_down(struct net_device *dev) priv->up = 0; priv->ieee80211->ieee_up = 0; - RT_TRACE(COMP_DOWN, "==========>%s()\n", __FUNCTION__); + RT_TRACE(COMP_DOWN, "==========>%s()\n", __func__); /* FIXME */ if (!netif_queue_stopped(dev)) netif_stop_queue(dev); @@ -4203,7 +4203,7 @@ int rtl8192_down(struct net_device *dev) ieee80211_softmac_stop_protocol(priv->ieee80211); memset(&priv->ieee80211->current_network, 0, offsetof(struct ieee80211_network, list)); - RT_TRACE(COMP_DOWN, "<==========%s()\n", __FUNCTION__); + RT_TRACE(COMP_DOWN, "<==========%s()\n", __func__); return 0; } @@ -5903,7 +5903,7 @@ void EnableHWSecurityConfig8192(struct net_device *dev) ieee->hwsec_active = 0; SECR_value &= ~SCR_RxDecEnable; } - RT_TRACE(COMP_SEC, "%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __FUNCTION__, \ + RT_TRACE(COMP_SEC, "%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __func__, \ ieee->hwsec_active, ieee->pairwise_key_type, SECR_value); { write_nic_byte(dev, SECR, SECR_value);//SECR_value | SCR_UseDK ); -- 2.30.2