From 5b162cc4ac27ba76e576abc9090c54cf90a17980 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 30 Aug 2018 14:54:04 +0200 Subject: [PATCH] Revert "serial: sh-sci: Allow for compressed SCIF address" This reverts commit 2d4dd0da45401c7ae7332b4d1eb7bbb1348edde9. This broke earlycon on all Renesas ARM platforms using a SCIF port for the serial console (R-Car, RZ/A1, RZ/G1, RZ/G2 SoCs), due to an incorrect value of port->regshift. Signed-off-by: Geert Uytterhoeven Acked-by: Chris Brandt Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 5d42c9a63001..ab3f6e91853d 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -346,15 +346,15 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = { [SCIx_SH4_SCIF_REGTYPE] = { .regs = { [SCSMR] = { 0x00, 16 }, - [SCBRR] = { 0x02, 8 }, - [SCSCR] = { 0x04, 16 }, - [SCxTDR] = { 0x06, 8 }, - [SCxSR] = { 0x08, 16 }, - [SCxRDR] = { 0x0a, 8 }, - [SCFCR] = { 0x0c, 16 }, - [SCFDR] = { 0x0e, 16 }, - [SCSPTR] = { 0x10, 16 }, - [SCLSR] = { 0x12, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, }, .fifosize = 16, .overrun_reg = SCLSR, @@ -2837,7 +2837,7 @@ static int sci_init_single(struct platform_device *dev, { struct uart_port *port = &sci_port->port; const struct resource *res; - unsigned int i, regtype; + unsigned int i; int ret; sci_port->cfg = p; @@ -2874,7 +2874,6 @@ static int sci_init_single(struct platform_device *dev, if (unlikely(sci_port->params == NULL)) return -EINVAL; - regtype = sci_port->params - sci_port_params; switch (p->type) { case PORT_SCIFB: sci_port->rx_trigger = 48; @@ -2929,10 +2928,6 @@ static int sci_init_single(struct platform_device *dev, port->regshift = 1; } - if (regtype == SCIx_SH4_SCIF_REGTYPE) - if (sci_port->reg_size >= 0x20) - port->regshift = 1; - /* * The UART port needs an IRQ value, so we peg this to the RX IRQ * for the multi-IRQ ports, which is where we are primarily -- 2.30.2