From 5aca47bca1ad4dd8dfcd7d17608739498ba6b7c6 Mon Sep 17 00:00:00 2001 From: Radito Wahyu Date: Sat, 30 Mar 2024 09:28:57 +0700 Subject: [PATCH] ramips: add support for BOLT BL100 BL100 is a router made by Bolt by a provider in Indonesia The original firmware created using Mediatek SDK and kernel 2.6.36 - Chipset: MediaTek MT7620A ver 2, eco 6 - RAM: 64 MB - Bootloader: U Boot - Flash: Winbond W25Q128BV (16 MB) - Ports: 2x 10/100 Ethernet, 1x RJ-11 VoIP - Modem: Qualcomm LTE B40 (2300 Mhz) VID:05c6 PID:9026 - Wireless: Internal MT7620A (2.4 Ghz) & Mediatek MT76x2E (5.8 Ghz) - Switch: MediaTek MT7620A built-in 5-port 10/100M switch - Voltage: DC 12V 1A - Antenna Port: 2x External Antenna, 2 LTE U.FL, 2 WiFi U.FL - Serial Port: Yes, 3.3 V TTL, Baud 57600 8N1 - Buttons: Reset and WPS - LED: 15 Total - 4 blue lte, 2 red lte, 1 reset, 1 power. - 1 wps, 1 voip, 1 wlan2, 1 wlan5, 1 lan, 1 wan, 1 wlan. Installation via stock firmware 1. Unlock Telnet access by downloading the backup .tar.gz file 2. Change the Telnet configuration to LAN_Telnet=1 3. Import backup configuration 4. Restart the router 5. Login to telnet with username and password = admin : db40 6. Download sysupgrade binary and mtd_write to the kernel partition `mtd_write write openwrt-bolt_bl100-squashfs-sysupgrade.bin Kernel` Signed-off-by: Radito Wahyu --- .../linux/ramips/dts/mt7620a_bolt_bl100.dts | 262 ++++++++++++++++++ target/linux/ramips/image/mt7620.mk | 10 + .../mt7620/base-files/etc/board.d/01_leds | 5 + .../mt7620/base-files/etc/board.d/02_network | 1 + .../base-files/etc/board.d/03_gpio_switches | 3 + 5 files changed, 281 insertions(+) create mode 100644 target/linux/ramips/dts/mt7620a_bolt_bl100.dts diff --git a/target/linux/ramips/dts/mt7620a_bolt_bl100.dts b/target/linux/ramips/dts/mt7620a_bolt_bl100.dts new file mode 100644 index 000000000000..bd335894c819 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_bolt_bl100.dts @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7620a.dtsi" + +#include +#include +#include +#include + +/ { + compatible = "bolt,bl100", "ralink,mt7620a-soc"; + model = "Bolt BL100"; + + aliases { + led-boot = &led_reset; + led-failsafe = &led_reset; + led-running = &led_power; + led-upgrade = &led_reset; + label-mac-device = ðernet; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + leds { + compatible = "gpio-leds"; + + led_reset: reset { + function = LED_FUNCTION_BOOT; + color = ; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + led_lte1 { + label = "blue:lte1"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + led_lte2 { + label = "blue:lte2"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + led_lte3 { + label = "blue:lte3"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + led_lte4 { + label = "blue:lte4"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + led_lte5 { + label = "red:lte5"; + gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + }; + + led_lte6 { + label = "red:lte6"; + gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + }; + + led_wps { + function = LED_FUNCTION_WPS; + color = ; + gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + }; + + led_voip { + label = "blue:voip"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + }; + + led_wlan2 { + function = LED_FUNCTION_WLAN_2GHZ; + color = ; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + led_wlan5 { + function = LED_FUNCTION_WLAN_5GHZ; + color = ; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led_lan { + function = LED_FUNCTION_LAN; + color = ; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + led_wan { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "WPS"; + linux,code = ; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "RST"; + linux,code = ; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <70000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + }; + + partition@40000 { + compatible = "nvmem-cells"; + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x200>; + }; + + eeprom_factory_8000: eeprom@8000 { + reg = <0x8000 0x200>; + }; + + macaddr_factory_28: macaddr@28 { + compatible = "mac-base"; + reg = <0x28 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xf80000>; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x26112015>; + }; + + partition@fd0000 { + label = "crash"; + reg = <0xfd0000 0x10000>; + }; + + partition@fe0000 { + label = "reserved"; + reg = <0xfe0000 0x10000>; + read-only; + }; + + partition@ff0000 { + label = "Bdata"; + reg = <0xff0000 0x10000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + nvmem-cells = <&macaddr_factory_28>; + nvmem-cell-names = "mac-address"; + + mediatek,portmap = "llllw"; +}; + +&wmac { + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; + + pinctrl-names = "default", "pa_gpio"; + pinctrl-0 = <&pa_pins>; + pinctrl-1 = <&pa_gpio_pins>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_8000>; + nvmem-cell-names = "eeprom"; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&state_default { + gpio { + groups = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd"; + function = "gpio"; + }; +}; + diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 04c326292083..b35359aefee7 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -149,6 +149,16 @@ define Device/bdcom_wap2100-sk endef TARGET_DEVICES += bdcom_wap2100-sk +define Device/bolt_bl100 + SOC := mt7620a + IMAGE_SIZE := 15872k + DEVICE_VENDOR := Bolt + DEVICE_MODEL := BL100 + DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci + UIMAGE_MAGIC := 0x26112015 +endef +TARGET_DEVICES += bolt_bl100 + define Device/buffalo_whr-1166d SOC := mt7620a IMAGE_SIZE := 16064k diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index ffc5745e6f3b..a56ae8f0bf09 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -40,6 +40,11 @@ asus,rt-n14u) bdcom,wap2100-sk) ucidef_set_led_netdev "wifi_led" "wifi" "green:wlan2g" "wlan0" ;; +bolt,bl100) + ucidef_set_led_default "power" "power" "blue:power" "1" + ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0.1" + ucidef_set_led_netdev "wan" "wan" "green:wan" "eth0.2" + ;; comfast,cf-wr800n) ucidef_set_led_netdev "lan" "lan" "white:ethernet" eth0.1 ucidef_set_led_netdev "wifi_led" "wifi" "white:wifi" "wlan0" diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 167bb47b69e6..8cc6091e235a 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -34,6 +34,7 @@ ramips_setup_interfaces() "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; alfa-network,r36m-e4g|\ + bolt,bl100|\ zbtlink,zbt-we1026-h-32m) ucidef_add_switch "switch0" \ "3:lan" "4:wan" "6@eth0" diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches index 81daca497898..55881135488e 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches @@ -6,6 +6,9 @@ board_config_update board=$(board_name) case "$board" in +bolt,bl100) + ucidef_add_gpio_switch "modem_enable" "Enable LTE Modem" "28" "1" + ;; dlink,dir-510l) ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0" ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1" -- 2.30.2