From 5ab066e5465b2984a45e205f33896b2ec1620c37 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 Feb 2017 10:23:10 +0000 Subject: [PATCH] serial: st-asc: Ignore the parity error bit if 8-bit mode is enabled The datasheet states: "If the MODE field selects an 8-bit frame then this [parity error] bit is undefined. Software should ignore this bit when reading 8-bit frames." Acked-by: Peter Griffin Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/st-asc.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index 379e5bd37df9..69e62326723d 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -287,9 +287,19 @@ static void asc_transmit_chars(struct uart_port *port) static void asc_receive_chars(struct uart_port *port) { struct tty_port *tport = &port->state->port; - unsigned long status; + unsigned long status, mode; unsigned long c = 0; char flag; + bool ignore_pe = false; + + /* + * Datasheet states: If the MODE field selects an 8-bit frame then + * this [parity error] bit is undefined. Software should ignore this + * bit when reading 8-bit frames. + */ + mode = asc_in(port, ASC_CTL) & ASC_CTL_MODE_MSK; + if (mode == ASC_CTL_MODE_8BIT || mode == ASC_CTL_MODE_8BIT_PAR) + ignore_pe = true; if (port->irq_wake) pm_wakeup_event(tport->tty->dev, 0); @@ -299,8 +309,8 @@ static void asc_receive_chars(struct uart_port *port) flag = TTY_NORMAL; port->icount.rx++; - if ((c & (ASC_RXBUF_FE | ASC_RXBUF_PE)) || - status & ASC_STA_OE) { + if (status & ASC_STA_OE || c & ASC_RXBUF_FE || + (c & ASC_RXBUF_PE && !ignore_pe)) { if (c & ASC_RXBUF_FE) { if (c == (ASC_RXBUF_FE | ASC_RXBUF_DUMMY_RX)) { -- 2.30.2