From 5a95f6fbd21c542a6df0a41fb827ad7e7c9b17d8 Mon Sep 17 00:00:00 2001 From: wdenk Date: Wed, 12 Jan 2005 00:38:03 +0000 Subject: [PATCH] * Patch by Robin Getz, 13 Oct 2004: Add standalone application to change SMC91C111 MAC addresses, see examples/README.smc91111_eeprom * Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004: Fix Flash support for ARM Integrator CP. --- CHANGELOG | 7 + board/integratorcp/flash.c | 235 +++++++++++++------ board/omap2420h4/config.mk | 1 - board/omap2420h4/mem.c | 22 +- board/omap2420h4/omap2420h4.c | 6 - board/omap2420h4/platform.S | 1 - board/omap2420h4/sys_info.c | 3 - examples/README.smc91111_eeprom | 246 ++++++++++++++++++++ examples/smc91111_eeprom.c | 391 ++++++++++++++++++++++++++++++++ include/configs/integratorcp.h | 49 ++-- include/configs/omap2420h4.h | 6 +- 11 files changed, 851 insertions(+), 116 deletions(-) create mode 100644 examples/README.smc91111_eeprom create mode 100644 examples/smc91111_eeprom.c diff --git a/CHANGELOG b/CHANGELOG index 3f6246934d..6ae7c78c6d 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,13 @@ Changes for U-Boot 1.1.3: ====================================================================== +* Patch by Robin Getz, 13 Oct 2004: + Add standalone application to change SMC91C111 MAC addresses, + see examples/README.smc91111_eeprom + +* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004: + Fix Flash support for ARM Integrator CP. + * Patch by Richard Woodruff, 10 Jan 2005: Update support for OMAP2420 (ARM11) and H4 board: o clean up and add new types to H4 memory probe code. diff --git a/board/integratorcp/flash.c b/board/integratorcp/flash.c index b120d63eb9..4d6eff0bf1 100644 --- a/board/integratorcp/flash.c +++ b/board/integratorcp/flash.c @@ -1,4 +1,7 @@ /* + * (C) Copyright 2004 + * Xiaogeng (Shawn) Jin, Agilent Technologies, xiaogeng_jin@agilent.com + * * (C) Copyright 2001 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net * @@ -31,20 +34,22 @@ #include #include -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +#define DEBUG + +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ /* Board support for 1 or 2 flash devices */ -#undef FLASH_PORT_WIDTH32 -#define FLASH_PORT_WIDTH16 +#define FLASH_PORT_WIDTH32 +#undef FLASH_PORT_WIDTH16 #ifdef FLASH_PORT_WIDTH16 -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short +#define FLASH_PORT_WIDTH ushort +#define FLASH_PORT_WIDTHV vu_short #define SWAP(x) __swab16(x) #else -#define FLASH_PORT_WIDTH ulong -#define FLASH_PORT_WIDTHV vu_long +#define FLASH_PORT_WIDTH ulong +#define FLASH_PORT_WIDTHV vu_long #define SWAP(x) __swab32(x) #endif @@ -67,6 +72,12 @@ OrgDef OrgIntel_28F256L18T[] = { {255, 128 * 1024}, /* 255 * 128kBytes sectors */ }; +/* CP control register base address */ +#define CPCR_BASE 0xCB000000 +#define CPCR_EXTRABANK 0x8 +#define CPCR_FLASHSIZE 0x4 +#define CPCR_FLWREN 0x2 +#define CPCR_FLVPPEN 0x1 /*----------------------------------------------------------------------- * Functions @@ -83,29 +94,50 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt); /*----------------------------------------------------------------------- */ - unsigned long flash_init (void) { - int i; + int i, nbanks; ulong size = 0; - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } + vu_long *cpcr = (vu_long *)CPCR_BASE; + + /* Check if there is an extra bank of flash */ + if (cpcr[1] & CPCR_EXTRABANK) + nbanks = 2; + else + nbanks = 1; + + if (nbanks > CFG_MAX_FLASH_BANKS) + nbanks = CFG_MAX_FLASH_BANKS; + + /* Enable flash write */ + cpcr[1] |= 3; + + for (i = 0; i < nbanks; i++) { + flash_get_size ((FPW *)(CFG_FLASH_BASE + size), &flash_info[i]); + flash_get_offsets (CFG_FLASH_BASE + size, &flash_info[i]); size += flash_info[i].size; } - /* Protect monitor and environment sectors - */ +#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + /* monitor protection */ + flash_protect (FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); +#endif + +#ifdef CFG_ENV_IS_IN_FLASH + /* ENV protection ON */ + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); +#endif + + /* Protect SIB (0x24800000) and bootMonitor (0x24c00000) */ flash_protect (FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); + flash_info[0].start[62], + flash_info[0].start[63] + PHYS_FLASH_SECT_SIZE - 1, + &flash_info[0]); return size; } @@ -115,23 +147,15 @@ unsigned long flash_init (void) static void flash_get_offsets (ulong base, flash_info_t * info) { int i; - OrgDef *pOrgDef; - pOrgDef = OrgIntel_28F256L18T; if (info->flash_id == FLASH_UNKNOWN) { return; } if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { for (i = 0; i < info->sector_count; i++) { - if (i > 255) { - info->start[i] = base + (i * 0x8000); - info->protect[i] = 0; - } else { - info->start[i] = base + - (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } + info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); + info->protect[i] = 0; } } } @@ -156,10 +180,20 @@ void flash_print_info (flash_info_t * info) break; } + /* Integrator CP board uses 28F640J3C or 28F128J3C parts, + * which have the same device id numbers as 28F640J3A or + * 28F128J3A + */ switch (info->flash_id & FLASH_TYPEMASK) { case FLASH_28F256L18T: printf ("FLASH 28F256L18T\n"); break; + case FLASH_28F640J3A: + printf ("FLASH 28F640J3C\n"); + break; + case FLASH_28F128J3A: + printf ("FLASH 28F128J3C\n"); + break; default: printf ("Unknown Chip Type\n"); break; @@ -185,6 +219,17 @@ void flash_print_info (flash_info_t * info) static ulong flash_get_size (FPW * addr, flash_info_t * info) { volatile FPW value; + vu_long *cpcr = (vu_long *)CPCR_BASE; + int nsects; + + /* Check the flash size */ + if (cpcr[1] & CPCR_FLASHSIZE) + nsects = 128; + else + nsects = 64; + + if (nsects > CFG_MAX_FLASH_SECT) + nsects = CFG_MAX_FLASH_SECT; /* Write auto select command: read Manufacturer ID */ addr[0x5555] = (FPW) 0x00AA00AA; @@ -204,19 +249,31 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info) info->flash_id = FLASH_UNKNOWN; info->sector_count = 0; info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ + return (0); /* no or unknown flash */ } mb (); - value = addr[1]; /* device ID */ + value = addr[1]; /* device ID */ switch (value) { case (FPW) (INTEL_ID_28F256L18T): info->flash_id += FLASH_28F256L18T; info->sector_count = 259; info->size = 0x02000000; - break; /* => 32 MB */ + break; /* => 32 MB */ + + case (FPW) (INTEL_ID_28F640J3A): + info->flash_id += FLASH_28F640J3A; + info->sector_count = nsects; + info->size = nsects * PHYS_FLASH_SECT_SIZE; + break; + + case (FPW) (INTEL_ID_28F128J3A): + info->flash_id += FLASH_28F128J3A; + info->sector_count = nsects; + info->size = nsects * PHYS_FLASH_SECT_SIZE; + break; default: info->flash_id = FLASH_UNKNOWN; @@ -241,23 +298,32 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info) */ void flash_unprotect_sectors (FPWV * addr) { -#define PD_FINTEL_WSMS_READY_MASK 0x0080 + FPW status; *addr = (FPW) 0x00500050; /* clear status register */ /* this sends the clear lock bit command */ *addr = (FPW) 0x00600060; *addr = (FPW) 0x00D000D0; + + reset_timer_masked(); + while (((status = *addr) & (FPW)0x00800080) != 0x00800080) { + if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) { + printf("Timeout"); + break; + } + } + + *addr = (FPW) 0x00FF00FF; } /*----------------------------------------------------------------------- */ - int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -290,13 +356,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("\n"); } - - start = get_timer (0); - last = start; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - /* Start erase on unprotected sectors */ for (sect = s_first; sect <= s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ @@ -305,36 +364,53 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); - flash_unprotect_sectors (addr); + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + /* flash_unprotect_sectors (addr); */ /* arm simple, non interrupt dependent timer */ reset_timer_masked (); - *addr = (FPW) 0x00500050;/* clear status register */ - *addr = (FPW) 0x00200020;/* erase setup */ - *addr = (FPW) 0x00D000D0;/* erase confirm */ - - while (((status = - *addr) & (FPW) 0x00800080) != - (FPW) 0x00800080) { - if (get_timer_masked () > - CFG_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - /* suspend erase */ - *addr = (FPW) 0x00B000B0; - /* reset to read mode */ - *addr = (FPW) 0x00FF00FF; - rcode = 1; - break; + *addr = (FPW) 0x00500050; /* clear status register */ + *addr = (FPW) 0x00200020; /* erase setup */ + *addr = (FPW) 0x00D000D0; /* erase confirm */ + mb(); + + udelay(1000); /* Let's wait 1 ms */ + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + *addr = (FPW)0x00700070; + status = *addr; + if ((status & (FPW) 0x00400040) == (FPW) 0x00400040) { + /* erase suspended? Resume it */ + reset_timer_masked(); + *addr = (FPW) 0x00D000D0; + } else { +#ifdef DEBUG + printf ("Timeout,0x%08x\n", status); +#else + printf("Timeout\n"); +#endif + + *addr = (FPW) 0x00500050; + *addr = (FPW) 0x00FF00FF; /* reset to read mode */ + rcode = 1; + break; + } } } - /* clear status register cmd. */ - *addr = (FPW) 0x00500050; - *addr = (FPW) 0x00FF00FF;/* resest to read mode */ + *addr = (FPW) 0x00FF00FF; /* resest to read mode */ printf (" done\n"); } } + return rcode; } @@ -345,7 +421,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) * 2 - Flash not erased * 4 - Flash not identified */ - int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { ulong cp, wp; @@ -443,23 +518,39 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); return (2); } - flash_unprotect_sectors (addr); + /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); + + /* flash_unprotect_sectors (addr); */ + *addr = (FPW) 0x00400040; /* write setup */ *addr = data; + mb(); + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + /* arm simple, non interrupt dependent timer */ reset_timer_masked (); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ +#ifdef DEBUG + *addr = (FPW) 0x00700070; + status = *addr; + printf("## status=0x%08x, addr=0x%08x\n", status, addr); +#endif + *addr = (FPW) 0x00500050; /* clear status register cmd */ + *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } } - *addr = (FPW) 0x00FF00FF; /* restore read mode */ + + *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (0); } diff --git a/board/omap2420h4/config.mk b/board/omap2420h4/config.mk index f2a533e035..e6aa75678d 100644 --- a/board/omap2420h4/config.mk +++ b/board/omap2420h4/config.mk @@ -20,4 +20,3 @@ TEXT_BASE = 0x80e80000 # This is either with a GP system or a signed boot image. # easiest, and safest way to go if you can. #TEXT_BASE = 0x40280000 - diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c index 3ce38cc4d4..9ae595b3ca 100644 --- a/board/omap2420h4/mem.c +++ b/board/omap2420h4/mem.c @@ -74,9 +74,9 @@ void prcm_init(void) if(running_in_sram()){ /* If running fully from SRAM this is OK. The Flash bus drops out for just a little. - * but then comes back. If running from Flash this sequence kills you, thus you need - * to run it using CONFIG_PARTIAL_SRAM. - */ + * but then comes back. If running from Flash this sequence kills you, thus you need + * to run it using CONFIG_PARTIAL_SRAM. + */ __raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */ wait_on_value(BIT0|BIT1, BIT0, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */ sdelay(1000); @@ -172,14 +172,13 @@ void do_sdrc_init(u32 offset, u32 early) cpu = get_cpu_type(); /* warning generated, though code generation is correct. this may bite later, - * but is ok for now. there is only so much C code you can do on stack only - * operation. + * but is ok for now. there is only so much C code you can do on stack only + * operation. */ if (cpu == CPU_2422){ sdata = (sdrc_data_t *)&sdrc_2422; pass_type = STACKED; - } - else{ + } else{ sdata = (sdrc_data_t *)&sdrc_2420; pass_type = IP_DDR; } @@ -187,10 +186,10 @@ void do_sdrc_init(u32 offset, u32 early) __asm__ __volatile__("": : :"memory"); /* limit compiler scope */ /* u-boot is compiled to run in DDR or SRAM at 8xxxxxxx or 4xxxxxxx. - * If we are running in flash prior to relocation and we use data - * here which is not pc relative we need to get the address correct. - * We need to find the current flash mapping to dress up the initial - * pointer load. As long as this is const data we should be ok. + * If we are running in flash prior to relocation and we use data + * here which is not pc relative we need to get the address correct. + * We need to find the current flash mapping to dress up the initial + * pointer load. As long as this is const data we should be ok. */ if((early) && running_in_flash()){ sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base()); @@ -344,4 +343,3 @@ void gpmc_init(void) __raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */ sdelay(2000); } - diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c index 697dfefe68..8c7982d679 100644 --- a/board/omap2420h4/omap2420h4.c +++ b/board/omap2420h4/omap2420h4.c @@ -36,7 +36,6 @@ extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; #endif - static void wait_for_command_complete(unsigned int wd_base); /******************************************************* @@ -694,8 +693,6 @@ void muxSetupGPMC(void) /* signal - Gpmc_ncs2; pin - E2; offset - 0x008C; mode - 0; Byte-2 Pull/up - N/A */ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2, *MuxConfigReg = 0x00 ; - - } /**************************************************************** @@ -860,6 +857,3 @@ void nand_init(void) #endif } #endif - - - diff --git a/board/omap2420h4/platform.S b/board/omap2420h4/platform.S index 86bf5ba3c5..73ba462857 100644 --- a/board/omap2420h4/platform.S +++ b/board/omap2420h4/platform.S @@ -183,4 +183,3 @@ VAL_INTH_SETUP: .word PERIFERAL_PORT_BASE SRAM_STACK: .word LOW_LEVEL_SRAM_STACK - diff --git a/board/omap2420h4/sys_info.c b/board/omap2420h4/sys_info.c index 78b936cfff..121d67916d 100644 --- a/board/omap2420h4/sys_info.c +++ b/board/omap2420h4/sys_info.c @@ -251,8 +251,6 @@ static u32 get_base2(void) return(val); } - - /******************************************************** * running_in_flash() - tell if currently running in * flash. @@ -302,4 +300,3 @@ u32 running_from_internal_boot(void) else return(0); } - diff --git a/examples/README.smc91111_eeprom b/examples/README.smc91111_eeprom new file mode 100644 index 0000000000..28e7e69788 --- /dev/null +++ b/examples/README.smc91111_eeprom @@ -0,0 +1,246 @@ +This is the readme for the Das U-Boot standalone program smc91111 + +The main purpose of this is to manage MAC addresses on platforms +which include the SMC91111 integrated 10/100 MAC Phy, with attached +EEPROMs. + + +Contents: +------------------------ +1. Ensuring U-boot's MAC address can be set in hardware +2. Running the smc91111_eeprom program +3. Setting MAC addresses +4. Other things you can do with this +5. Things to be done. + + +1. Ensuring U-boot's MAC address can be set in hardware +-------------------------------------------------------------------------- + +On the Internet - MAC addresses are very important. Short for Media +Access Control address, a hardware address that uniquely identifies +each node of a network. When things are not unique - bad things +can happen. This is why U-Boot makes it difficult to change MAC +addresses. + +To find out who has a MAC address, or to purchase MAC addresses, goto +the IEEE, at: +http://standards.ieee.org/regauth/oui/index.shtml + +To change your MAC address, there can not be a MAC address predefined in +U-Boot. To ensure that this does not occur, check your +include/configs/.h file, and check to see that the following +settings are _not_ or commented out there. + +#define HARDCODE_MAC 1 +#define CONFIG_ETHADDR 02:80:ad:20:31:b8 + +The purpose of HARDCODE_MAC is to hardcode the MAC address in software, +(not what we want), or to preset it to 02:80:ad:20:31:b8 (not what we +want either). + +You can check this in a running U-Boot, by doing a power cycle, then +before U-Boot tries to do any networking, running the 'printenv' command + + BOOT> printenv + + ethaddr=02:80:ad:20:31:b8 + +If you see the 'ethaddr' variable show up, like the above, you need to +recompile U-Boot, with the above settings commented out of the +include/configs/.h file. + +2. Running the smc91111_eeprom program +--------------------------------------------------------------------- + +After Uboot is compiled, there should be three files of interest: +-rwxr-xr-x 1 8806 2004-10-11 14:00 smc91111_eeprom <- ELF +-rwxr-xr-x 1 3440 2004-10-11 14:00 smc91111_eeprom.bin <- BIN +-rwxr-xr-x 1 9524 2004-10-11 14:00 smc91111_eeprom.srec <- SREC + +if there is not, check the examples/Makefile, and ensure there is something +like for your architecture: + + ifeq ($(ARCH),blackfin) + SREC += smc91111_eeprom.srec + BIN += smc91111_eeprom.bin smc91111_eeprom + endif + +To load the files: there are two methods: a) serial or b) network. Since +it is not a good idea to start doing things on the network before the +MAC address is set, this example will do things over serial. + +a) Loading the elf file via the serial port +-------------------------------------------- +Loading the elf is very easy - just ensure that the location +you specify things to load as is not the load address specified +in the Makefile. + +BOOT> loadb 0x1000000 + +## Ready for binary (kermit) download to 0x01000000 at 57600 bps... + +(type CNTL-\ then C) +(Back at local machine) +---------------------------------------------------- +Kermit>send ~/u-boot_1.1.1/examples/smc91111_eeprom +Kermit>connect + +Connecting to /dev/ttyS0, speed 57600 + Escape character: Ctrl-\ (ASCII 28, FS): enabled +Type the escape character followed by C to get back, +or followed by ? to see other options. +---------------------------------------------------- +## Total Size = 0x00002266 = 8806 Bytes +## Start Addr = 0x01000000 + +BOOT> bootelf 0x1000000 + +Loading .text @ 0x00001000 (3440 bytes) +## Starting application at 0x000010d8 ... + +SMC91111> + +b) Loading the binary file via the serial port +----------------------------------------------- +For many toolchains, the entry point is not the load point. +The Load point is a hard coded address from the +examples/Makefile. The entry point can be found by doing something +like: + + u-boot_1.1.1/examples> bfin-elf-objdump -d smc91111_eeprom |less + + smc91111_eeprom: file format elf32-bfin + + Disassembly of section .text: + + 00001000 : + 1000: + 000010d8 : + +You can see that the entry point (or the address that should be +jumped to is 0x10d8). This is also the same as the entry point +of the elf file. + +Now we load it to the actual load location: + +BOOT> loadb 0x1000 + +## Ready for binary (kermit) download to 0x00001000 at 57600 bps... + +(Back at pinky.dsl-only.net) +---------------------------------------------------- +Kermit>send /tftpboot/eeprom.bin +Kermit>connect + +Connecting to /dev/ttyS0, speed 57600 + Escape character: Ctrl-\ (ASCII 28, FS): enabled +Type the escape character followed by C to get back, +or followed by ? to see other options. +---------------------------------------------------- +## Total Size = 0x00000d70 = 3440 Bytes +## Start Addr = 0x00001000 + +BOOT> go 0x10D8 + +## Starting application at 0x000010D8 ... + +SMC91111> + +3. Setting MAC addresses +-------------------------------------------------------------------------- + +The MAC address can be stored in four locations: + +-Boot environmental variable in Flash <- can not change, without + re-flashing U-boot. +U-Boot environental variable <- can not change, without + resetting board/U-Boot +LAN91C111 Registers <- volitle +LAN91C111 EEPROM <- Non Volitle + +If you have not activated the network, and do not have a hardcoded +or pre-assigned MAC address in U-boot, the environmental variables +should be blank, and allow you to set things one time. + +To set the EEPROM MAC address to 12:34:56:78:9A:BC + +SMC91111> W E 20 3412 + +Writing EEPROM register 20 with 3412 +SMC91111> W E 21 7856 + +Writing EEPROM register 21 with 7856 +SMC91111> W E 22 BC9A + +Writing EEPROM register 22 with bc9a +EEPROM contents copied to MAC +SMC91111> P + +Current MAC Address in SMSC91111 12:34:56:78:9a:bc +Current MAC Address in EEPROM 12:34:56:78:9a:bc + +(CNTRL-C to exit) +SMC91111> ## Application terminated, rc = 0x0 + +BOOT> reset +U-Boot 1.1.1 (gcc version: 3.3.3) +Release Version Beta released on Oct 10 2004 - 00:34:35 +Blackfin support by LG Soft India +For further information please check this link http://www.blackfin.uclinux.org +BOOT> ping 192.168.0.4 + +Using MAC Address 12:34:56:78:9A:BC +host 192.168.0.4 is alive + + +4. Other things that you can do +-------------------------------------------------------------------------- +After the stand alone application is running, there are a few options: + - P : Print the MAC + - D : Dump the LAN91C111 EEPROM contents + - M : Dump the LAN91C111 MAC contents + - C : Copies the MAC address from the EEPROM to the LAN91C111 + - W : Write a register in the EEPROM or in the MAC + +SMC91111> P + +Current MAC Address in SMSC91111 12:34:56:78:9a:bc +Current MAC Address in EEPROM 12:34:56:78:9a:bc + +SMC91111> D + +IOS2-0 000 001 002 003 004 005 006 007 +CONFIG 00:ffff 04:ffff 08:ffff 0c:ffff 10:ffff 14:ffff 18:ffff 1c:ffff +BASE 01:ffff 05:ffff 09:ffff 0d:ffff 11:ffff 15:ffff 19:ffff 1d:ffff + 02:ffff 06:ffff 0a:ffff 0e:0020 12:ffff 16:ffff 1a:ffff 1e:ffff + 03:ffff 07:ffff 0b:ffff 0f:ffff 13:ffff 17:ffff 1b:ffff 1f:ffff + +20:3412 21:7856 22:bc9a 23:ffff 24:ffff 25:ffff 26:ffff 27:ffff +28:ffff 29:ffff 2a:ffff 2b:ffff 2c:ffff 2d:ffff 2e:ffff 2f:ffff +30:ffff 31:ffff 32:ffff 33:ffff 34:ffff 35:ffff 36:ffff 37:ffff +38:ffff 39:ffff 3a:ffff 3b:ffff 3c:ffff 3d:ffff 3e:ffff 3f:ffff + +SMC91111> M + + Bank0 Bank1 Bank2 Bank3 +00 0000 a0b1 3332 0000 +02 0000 1801 8000 0000 +04 0000 3412 8080 0000 +06 0000 7856 003f 0000 +08 0404 bc9a 02df 3332 +0a 0000 ffff 02df 3391 +0c 0000 1214 0004 001f +0e 3300 3301 3302 3303 + +SMC91111> C + +EEPROM contents copied to MAC + +SMC91111> W E 2A ABCD + +Writing EEPROM register 2a with abcd + +SMC91111> W M 14 FF00 + +Writing MAC register bank 1, reg 04 with ff00 diff --git a/examples/smc91111_eeprom.c b/examples/smc91111_eeprom.c new file mode 100644 index 0000000000..885f9336cd --- /dev/null +++ b/examples/smc91111_eeprom.c @@ -0,0 +1,391 @@ +/* + * (C) Copyright 2004 + * Robin Getz rgetz@blacfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Heavily borrowed from the following peoples GPL'ed software: + * - Wolfgang Denk, DENX Software Engineering, wd@denx.de + * Das U-boot + * - Ladislav Michl ladis@linux-mips.org + * A rejected patch on the U-Boot mailing list + */ + +#include +#include +#include "../drivers/smc91111.h" + +#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE +#define EEPROM 0x1; +#define MAC 0x2; +#define UNKNOWN 0x4; + +void dump_reg (void); +void dump_eeprom (void); +int write_eeprom_reg (int, int); +void copy_from_eeprom (void); +void print_MAC (void); +int read_eeprom_reg (int); +void print_macaddr (void); + +int smc91111_eeprom (int argc, char *argv[]) +{ + int c, i, j, done, line, reg, value, start, what; + char input[50]; + + /* Print the ABI version */ + app_startup (argv); + if (XF_VERSION != (int) get_version ()) { + printf ("Expects ABI version %d\n", XF_VERSION); + printf ("Actual U-Boot ABI version %d\n", + (int) get_version ()); + printf ("Can't run\n\n"); + return (0); + } + + asm ("p2.h = 0xFFC0;"); + asm ("p2.l = 0x0730;"); + asm ("r0 = 0x01;"); + asm ("w[p2] = r0;"); + asm ("ssync;"); + + asm ("p2.h = 0xffc0;"); + asm ("p2.l = 0x0708;"); + asm ("r0 = 0x01;"); + asm ("w[p2] = r0;"); + asm ("ssync;"); + + if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) { + printf ("Can't find SMSC91111\n"); + return (0); + } + + done = 0; + what = UNKNOWN; + printf ("\n"); + while (!done) { + /* print the prompt */ + printf ("SMC91111> "); + line = 0; + i = 0; + start = 1; + while (!line) { + /* Wait for a keystroke */ + while (!tstc ()); + + c = getc (); + /* Make Uppercase */ + if (c >= 'Z') + c -= ('a' - 'A'); + /* printf(" |%02x| ",c); */ + + switch (c) { + case '\r': /* Enter */ + case '\n': + input[i] = 0; + puts ("\r\n"); + line = 1; + break; + case '\0': /* nul */ + continue; + + case 0x03: /* ^C - break */ + input[0] = 0; + i = 0; + line = 1; + done = 1; + break; + + case 0x5F: + case 0x08: /* ^H - backspace */ + case 0x7F: /* DEL - backspace */ + if (i > 0) { + puts ("\b \b"); + i--; + } + break; + default: + if (start) { + if ((c == 'W') || (c == 'D') + || (c == 'M') || (c == 'C') + || (c == 'P')) { + putc (c); + input[i] = c; + if (i <= 45) + i++; + start = 0; + } + } else { + if ((c >= '0' && c <= '9') + || (c >= 'A' && c <= 'F') + || (c == 'E') || (c == 'M') + || (c == ' ')) { + putc (c); + input[i] = c; + if (i <= 45) + i++; + break; + } + } + break; + } + } + + for (; i < 49; i++) + input[i] = 0; + + switch (input[0]) { + case ('W'): + /* Line should be w reg value */ + i = 0; + reg = 0; + value = 0; + /* Skip to the next space or end) */ + while ((input[i] != ' ') && (input[i] != 0)) + i++; + + if (input[i] != 0) + i++; + + /* Are we writing to EEPROM or MAC */ + switch (input[i]) { + case ('E'): + what = EEPROM; + break; + case ('M'): + what = MAC; + break; + default: + what = UNKNOWN; + break; + } + + /* skip to the next space or end */ + while ((input[i] != ' ') && (input[i] != 0)) + i++; + if (input[i] != 0) + i++; + + /* Find register to write into */ + j = 0; + while ((input[i] != ' ') && (input[i] != 0)) { + j = input[i] - 0x30; + if (j >= 0xA) { + j -= 0x07; + } + reg = (reg * 0x10) + j; + i++; + } + + while ((input[i] != ' ') && (input[i] != 0)) + i++; + + if (input[i] != 0) + i++; + else + what = UNKNOWN; + + /* Get the value to write */ + j = 0; + while ((input[i] != ' ') && (input[i] != 0)) { + j = input[i] - 0x30; + if (j >= 0xA) { + j -= 0x07; + } + value = (value * 0x10) + j; + i++; + } + + switch (what) { + case 1: + printf ("Writing EEPROM register %02x with %04x\n", + reg, value); + write_eeprom_reg (value, reg); + break; + case 2: + printf ("Writing MAC register bank %i, + reg %02x with %04x\n", reg >> 4, reg & 0xE, value); + SMC_SELECT_BANK (reg >> 4); + SMC_outw (value, reg & 0xE); + break; + default: + printf ("Wrong\n"); + break; + } + break; + case ('D'): + dump_eeprom (); + break; + case ('M'): + dump_reg (); + break; + case ('C'): + copy_from_eeprom (); + break; + case ('P'): + print_macaddr (); + break; + default: + break; + } + + } + + return (0); +} + +void copy_from_eeprom (void) +{ + int i; + + SMC_SELECT_BANK (1); + SMC_outw ((SMC_inw (CTL_REG) & !CTL_EEPROM_SELECT) | CTL_RELOAD, + CTL_REG); + i = 100; + while ((SMC_inw (CTL_REG) & CTL_RELOAD) && --i) + udelay (100); + if (i == 0) { + printf ("Timeout Refreshing EEPROM registers\n"); + } else { + printf ("EEPROM contents copied to MAC\n"); + } + +} + +void print_macaddr (void) +{ + int i, j, k, mac[6]; + + printf ("Current MAC Address in SMSC91111 "); + SMC_SELECT_BANK (1); + for (i = 0; i < 5; i++) { + printf ("%02x:", SMC_inb (ADDR0_REG + i)); + } + + printf ("%02x\n", SMC_inb (ADDR0_REG + 5)); + + i = 0; + for (j = 0x20; j < 0x23; j++) { + k = read_eeprom_reg (j); + mac[i] = k & 0xFF; + i++; + mac[i] = k >> 8; + i++; + } + + printf ("Current MAC Address in EEPROM "); + for (i = 0; i < 5; i++) + printf ("%02x:", mac[i]); + printf ("%02x\n", mac[5]); + +} +void dump_eeprom (void) +{ + int j, k; + + printf ("IOS2-0 "); + for (j = 0; j < 8; j++) { + printf ("%03x ", j); + } + printf ("\n"); + + for (k = 0; k < 4; k++) { + if (k == 0) + printf ("CONFIG "); + if (k == 1) + printf ("BASE "); + if ((k == 2) || (k == 3)) + printf (" "); + for (j = 0; j < 0x20; j += 4) { + printf ("%02x:%04x ", j + k, read_eeprom_reg (j + k)); + } + printf ("\n"); + } + + for (j = 0x20; j < 0x40; j++) { + if ((j & 0x07) == 0) + printf ("\n"); + printf ("%02x:%04x ", j, read_eeprom_reg (j)); + } + printf ("\n"); + +} + +int read_eeprom_reg (int reg) +{ + int timeout; + + SMC_SELECT_BANK (2); + SMC_outw (reg, PTR_REG); + + SMC_SELECT_BANK (1); + SMC_outw (SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_RELOAD, + CTL_REG); + timeout = 100; + while ((SMC_inw (CTL_REG) & CTL_RELOAD) && --timeout) + udelay (100); + if (timeout == 0) { + printf ("Timeout Reading EEPROM register %02x\n", reg); + return 0; + } + + return SMC_inw (GP_REG); + +} + +int write_eeprom_reg (int value, int reg) +{ + int timeout; + + SMC_SELECT_BANK (2); + SMC_outw (reg, PTR_REG); + + SMC_SELECT_BANK (1); + SMC_outw (value, GP_REG); + SMC_outw (SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_STORE, CTL_REG); + timeout = 100; + while ((SMC_inw (CTL_REG) & CTL_STORE) && --timeout) + udelay (100); + if (timeout == 0) { + printf ("Timeout Writing EEPROM register %02x\n", reg); + return 0; + } + + return 1; + +} + +void dump_reg (void) +{ + int i, j; + + printf (" "); + for (j = 0; j < 4; j++) { + printf ("Bank%i ", j); + } + printf ("\n"); + for (i = 0; i < 0xF; i += 2) { + printf ("%02x ", i); + for (j = 0; j < 4; j++) { + SMC_SELECT_BANK (j); + printf ("%04x ", SMC_inw (i)); + } + printf ("\n"); + } +} diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 136974846c..0b0ffd43c6 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -35,7 +35,11 @@ * High Level Configuration Options * (easy to change) */ +#if 1 #define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ +#else +#define CONFIG_ARM946ES 1 /* This is an arm946es CPU core */ +#endif #define CONFIG_INTEGRATOR 1 /* in an Integrator board */ #define CONFIG_ARCH_CINTEGRATOR 1 /* Specifically, a CP */ @@ -51,7 +55,7 @@ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* @@ -69,31 +73,39 @@ #define CONFIG_PL011_CLOCK 14745600 #define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 } #define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 38400 +#define CONFIG_BAUDRATE 38400 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CFG_SERIAL0 0x16000000 #define CFG_SERIAL1 0x17000000 -#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_MEMORY) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT +/* +#define CONFIG_COMMANDS (CFG_CMD_DFL | CFG_CMD_PCI) +*/ +#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | \ + CFG_CMD_BDI | CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_ENV \ + ) + +/* #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include +#if 0 #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0" #define CONFIG_BOOTCOMMAND "bootp ; bootm" +#endif /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "Integrator-CP # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CFG_LOAD_ADDR 0x7fc0 /* default load address */ @@ -112,23 +124,24 @@ /*----------------------------------------------------------------------- * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define CFG_FLASH_BASE 0x24000000 -#define PHYS_FLASH_1 (CFG_FLASH_BASE) +#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_ENV_IS_NOWHERE +#define CFG_FLASH_BASE 0x24000000 +#define CFG_MAX_FLASH_SECT 64 #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ -/* timeout values are in ticks */ #define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ -#define CFG_MAX_FLASH_SECT 128 -#define CFG_ENV_SIZE 32768 -#endif /* __CONFIG_H */ +#define CFG_MONITOR_BASE 0x24F40000 +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_ADDR 0x24F00000 +#define CFG_ENV_SECT_SIZE 0x40000 /* 256KB */ +#define CFG_ENV_SIZE 8192 /* 8KB */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 85160546a7..47f78fad4b 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -40,17 +40,17 @@ /* Clock config to target*/ #define PRCM_CONFIG_II 1 -//#define PRCM_CONFIG_III 1 +/*#define PRCM_CONFIG_III 1 */ /* Memory configuration on board */ -//#define CONFIG_OPTIMIZE_DDR 1 +/*#define CONFIG_OPTIMIZE_DDR 1 */ #include /* get chip and board defs */ /* On H4, NOR and NAND flash are mutual exclusive. Define this if you want to use NAND */ -//#define CFG_NAND_BOOT +/*#define CFG_NAND_BOOT */ #ifdef CONFIG_APTIX #define V_SCLK 1500000 -- 2.30.2