From 5a2c4fe04dca1ee801d20fa07f347a9d6b7ec521 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 1 Oct 2009 15:44:20 -0700 Subject: [PATCH] s3cmci: make SDIO IRQ hardware IRQ support build-time configurable We have found a couple of boards where the SDIO IRQ hardware support has failed to work properly, and thus we should make it configurable whether or not to be included in the driver. Signed-off-by: Ben Dooks Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/Kconfig | 7 +++++++ drivers/mmc/host/s3cmci.c | 9 +++++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index cf6a6545240b..432ae8358c86 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -276,6 +276,13 @@ config MMC_S3C If unsure, say N. +config MMC_S3C_HW_SDIO_IRQ + bool "Hardware support for SDIO IRQ" + depends on MMC_S3C + help + Enable the hardware support for SDIO interrupts instead of using + the generic polling code. + choice prompt "Samsung S3C SD/MMC transfer code" depends on MMC_S3C diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 0af972275d45..4b627ca16cca 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1715,7 +1715,11 @@ static int __devinit s3cmci_probe(struct platform_device *pdev) mmc->ops = &s3cmci_ops; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; +#ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; +#else + mmc->caps = MMC_CAP_4_BIT_DATA; +#endif mmc->f_min = host->clk_rate / (host->clk_div * 256); mmc->f_max = host->clk_rate / host->clk_div; @@ -1750,8 +1754,9 @@ static int __devinit s3cmci_probe(struct platform_device *pdev) s3cmci_debugfs_attach(host); platform_set_drvdata(pdev, mmc); - dev_info(&pdev->dev, "%s - using %s\n", mmc_hostname(mmc), - s3cmci_host_usedma(host) ? "dma" : "pio"); + dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc), + s3cmci_host_usedma(host) ? "dma" : "pio", + mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw"); return 0; -- 2.30.2