From 5954c47c2194abcdeeae5f752e64b7c75770dbd3 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 16 Oct 2010 18:26:59 -0400 Subject: [PATCH] mtd: Blackfin NFC: fix badblock location with BootROM OOB The bbt structure isn't actually used, just the badblockpos. This lets the driver correctly handle badblocks with the different OOB layout with certain sized flashes. Previously, the blocks would all be reported as bad and be completely unusable. Signed-off-by: Mike Frysinger Signed-off-by: David Woodhouse --- drivers/mtd/nand/bf5xx_nand.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 6fbeefa3a766..79947bea4d57 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -110,15 +110,6 @@ static const unsigned short bfin_nfc_pin_req[] = 0}; #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC -static uint8_t bbt_pattern[] = { 0xff }; - -static struct nand_bbt_descr bootrom_bbt = { - .options = 0, - .offs = 63, - .len = 1, - .pattern = bbt_pattern, -}; - static struct nand_ecclayout bootrom_ecclayout = { .eccbytes = 24, .eccpos = { @@ -809,7 +800,6 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) /* setup hardware ECC data struct */ if (hardware_ecc) { #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC - chip->badblock_pattern = &bootrom_bbt; chip->ecc.layout = &bootrom_ecclayout; #endif chip->read_buf = bf5xx_nand_dma_read_buf; @@ -830,6 +820,10 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) goto out_err_nand_scan; } +#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC + chip->badblockpos = 63; +#endif + /* add NAND partition */ bf5xx_nand_add_partition(info); -- 2.30.2