From 586dfc8cafc25cf785332fdfe9530f392e26f30d Mon Sep 17 00:00:00 2001 From: Wan ZongShun Date: Sat, 13 Jun 2009 09:14:28 +0800 Subject: [PATCH] USB: Add nuvoton Ehci driver for w90p910 platform Add ehci support for w90p910 platform. Signed-off-by: Wan ZongShun Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Kconfig | 2 + drivers/usb/host/Kconfig | 6 ++ drivers/usb/host/ehci-hcd.c | 5 + drivers/usb/host/ehci-w90x900.c | 181 ++++++++++++++++++++++++++++++++ 4 files changed, 194 insertions(+) create mode 100644 drivers/usb/host/ehci-w90x900.c diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index dcd49f1e96d0..93cee3e5ca58 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -39,6 +39,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_AT91 default y if ARCH_PNX4008 && I2C default y if MFD_TC6393XB + default y if ARCH_W90X900 # PPC: default y if STB03xxx default y if PPC_MPC52xx @@ -58,6 +59,7 @@ config USB_ARCH_HAS_EHCI default y if PPC_83xx default y if SOC_AU1200 default y if ARCH_IXP4XX + default y if ARCH_W90X900 default PCI # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index f21ca7d27a43..41b8d7de2e07 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -113,6 +113,12 @@ config USB_EHCI_HCD_PPC_OF Enables support for the USB controller present on the PowerPC OpenFirmware platform bus. +config USB_W90X900_EHCI + bool "W90X900(W90P910) EHCI support" + depends on USB_EHCI_HCD && ARCH_W90X900 + ---help--- + Enables support for the W90X900 USB controller + config USB_OXU210HP_HCD tristate "OXU210HP HCD support" depends on USB diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 11c627ce6022..54715b875759 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1117,6 +1117,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ixp4xx_ehci_driver #endif +#ifdef CONFIG_USB_W90X900_EHCI +#include "ehci-w90x900.c" +#define PLATFORM_DRIVER ehci_hcd_w90x900_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) #error "missing bus glue for ehci-hcd" diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c new file mode 100644 index 000000000000..cfa21ea20f82 --- /dev/null +++ b/drivers/usb/host/ehci-w90x900.c @@ -0,0 +1,181 @@ +/* + * linux/driver/usb/host/ehci-w90x900.c + * + * Copyright (c) 2008 Nuvoton technology corporation. + * + * Wan ZongShun + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include + +/*ebable phy0 and phy1 for w90p910*/ +#define ENPHY (0x01<<8) +#define PHY0_CTR (0xA4) +#define PHY1_CTR (0xA8) + +static int __devinit usb_w90x900_probe(const struct hc_driver *driver, + struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + struct resource *res; + int retval = 0, irq; + unsigned long val; + + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + retval = -ENXIO; + goto err1; + } + + hcd = usb_create_hcd(driver, &pdev->dev, "w90x900 EHCI"); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + retval = -EBUSY; + goto err2; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + retval = -EFAULT; + goto err3; + } + + ehci = hcd_to_ehci(hcd); + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + + /* enable PHY 0,1,the regs only apply to w90p910 + * 0xA4,0xA8 were offsets of PHY0 and PHY1 controller of + * w90p910 IC relative to ehci->regs. + */ + val = __raw_readl(ehci->regs+PHY0_CTR); + val |= ENPHY; + __raw_writel(val, ehci->regs+PHY0_CTR); + + val = __raw_readl(ehci->regs+PHY1_CTR); + val |= ENPHY; + __raw_writel(val, ehci->regs+PHY1_CTR); + + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + ehci->sbrn = 0x20; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + goto err4; + + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval != 0) + goto err4; + + ehci_writel(ehci, 1, &ehci->regs->configured_flag); + + return retval; +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + return retval; +} + +static +void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev) +{ + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); +} + +static const struct hc_driver ehci_w90x900_hc_driver = { + .description = hcd_name, + .product_desc = "Nuvoton w90x900 EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_USB2|HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .reset = ehci_init, + .start = ehci_run, + + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, +#endif + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, +}; + +static int __devinit ehci_w90x900_probe(struct platform_device *pdev) +{ + if (usb_disabled()) + return -ENODEV; + + return usb_w90x900_probe(&ehci_w90x900_hc_driver, pdev); +} + +static int __devexit ehci_w90x900_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_w90x900_remove(hcd, pdev); + + return 0; +} + +static struct platform_driver ehci_hcd_w90x900_driver = { + .probe = ehci_w90x900_probe, + .remove = __devexit_p(ehci_w90x900_remove), + .driver = { + .name = "w90x900-ehci", + .owner = THIS_MODULE, + }, +}; + +MODULE_AUTHOR("Wan ZongShun "); +MODULE_DESCRIPTION("w90p910 usb ehci driver!"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:w90p910-ehci"); -- 2.30.2