From 57f0a29c3e089b74a42ff62289a47512ab3f8eba Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Sun, 26 Jan 2020 21:00:13 +0100 Subject: [PATCH] DTS: bindings: wl1251: mark ti,power-gpio as optional It is now only useful for SPI interface. Power control of SDIO mode is done through mmc core. Suggested by: Ulf Hansson Signed-off-by: H. Nikolaus Schaller Signed-off-by: Kalle Valo --- Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt index f38950560982..88fd28d15eac 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt @@ -9,11 +9,12 @@ Required properties: - spi-max-frequency : Maximum SPI clocking speed of device in Hz - interrupts : Should contain interrupt line - vio-supply : phandle to regulator providing VIO -- ti,power-gpio : GPIO connected to chip's PMEN pin Optional properties: - ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which provides configuration data (calibration, MAC, ...) +- ti,power-gpio : GPIO connected to chip's PMEN pin if operated in + SPI mode - Please consult Documentation/devicetree/bindings/spi/spi-bus.txt for optional SPI connection related properties, -- 2.30.2