From 5791eee2647ff358e6cb11b2830c62a92e2674c7 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Sat, 12 Oct 2013 23:45:34 -0300 Subject: [PATCH] [media] rtl2832: remove unused if_dvbt config parameter All used tuners has get_if_frequency() callback and that parameter is not needed and will not needed as all upcoming tuner drivers should implement get_if_frequency(). Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/rtl2832.c | 6 ------ drivers/media/dvb-frontends/rtl2832.h | 7 ------- drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 2 -- 3 files changed, 15 deletions(-) diff --git a/drivers/media/dvb-frontends/rtl2832.c b/drivers/media/dvb-frontends/rtl2832.c index ff73da9365e3..61d4ecbfd180 100644 --- a/drivers/media/dvb-frontends/rtl2832.c +++ b/drivers/media/dvb-frontends/rtl2832.c @@ -514,12 +514,6 @@ static int rtl2832_init(struct dvb_frontend *fe) goto err; } - if (!fe->ops.tuner_ops.get_if_frequency) { - ret = rtl2832_set_if(fe, priv->cfg.if_dvbt); - if (ret) - goto err; - } - /* * r820t NIM code does a software reset here at the demod - * may not be needed, as there's already a software reset at set_params() diff --git a/drivers/media/dvb-frontends/rtl2832.h b/drivers/media/dvb-frontends/rtl2832.h index 2cfbb6a97061..e5430810e9e3 100644 --- a/drivers/media/dvb-frontends/rtl2832.h +++ b/drivers/media/dvb-frontends/rtl2832.h @@ -37,13 +37,6 @@ struct rtl2832_config { */ u32 xtal; - /* - * IFs for all used modes. - * Hz - * 4570000, 4571429, 36000000, 36125000, 36166667, 44000000 - */ - u32 if_dvbt; - /* * tuner * XXX: This must be keep sync with dvb_usb_rtl28xxu demod driver. diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index 5e223e807de1..c6ff39e25388 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -589,14 +589,12 @@ err: static struct rtl2832_config rtl28xxu_rtl2832_fc0012_config = { .i2c_addr = 0x10, /* 0x20 */ .xtal = 28800000, - .if_dvbt = 0, .tuner = TUNER_RTL2832_FC0012 }; static struct rtl2832_config rtl28xxu_rtl2832_fc0013_config = { .i2c_addr = 0x10, /* 0x20 */ .xtal = 28800000, - .if_dvbt = 0, .tuner = TUNER_RTL2832_FC0013 }; -- 2.30.2