From 5745bbe7d5474a9367aae81f6fc22861c821e0a7 Mon Sep 17 00:00:00 2001 From: "Aleksandr V. Piskunov" Date: Sun, 1 Jul 2018 16:40:37 +0300 Subject: [PATCH] ipq806x: fix numbering for Netgear R7800 LAN ports Netgear R7800 switch LAN ports are numbered backwards in LuCI, i.e. numbering is not corresponding to the actual physical port labels, patch fixes that. Signed-off-by: Aleksandr V. Piskunov [merged with existing board using the same config] Signed-off-by: Hannu Nyman --- target/linux/ipq806x/base-files/etc/board.d/02_network | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index f5daf62653..786c6f70e1 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -16,7 +16,6 @@ compex,wpq864 |\ netgear,d7800 |\ netgear,r7500 |\ netgear,r7500v2 |\ -netgear,r7800 |\ qcom,ipq8064-ap148 |\ tplink,vr2600v) ucidef_add_switch "switch0" \ @@ -33,15 +32,16 @@ nec,wg2600hp) ucidef_add_switch "switch0" \ "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0" ;; +netgear,r7800 |\ +tplink,c2600) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0" + ;; qcom,ipq8064-db149) ucidef_set_interface_lan "eth1 eth2 eth3" ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0" ;; -tplink,c2600) - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0" - ;; zyxel,nbg6817) hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr) ucidef_add_switch "switch0" \ -- 2.30.2