From 55545b08701291b404f79cdc644b99d70e7f486e Mon Sep 17 00:00:00 2001 From: Wen Gong Date: Mon, 25 Feb 2019 11:46:01 +0200 Subject: [PATCH] ath10k: sdio: reset chip on power_down() The target device needs to be reset during power_down(), otherwise only the first power_up() will work. And as ath10k calls power_up() during driver initialisation the driver would be otherwise unusable. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00005-QCARMSWP-1. Signed-off-by: Wen Gong Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/sdio.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c index d62502f386f2..fae56c67766f 100644 --- a/drivers/net/wireless/ath/ath10k/sdio.c +++ b/drivers/net/wireless/ath/ath10k/sdio.c @@ -1382,6 +1382,12 @@ static int ath10k_sdio_hif_power_up(struct ath10k *ar, ath10k_dbg(ar, ATH10K_DBG_BOOT, "sdio power on\n"); + ret = ath10k_sdio_config(ar); + if (ret) { + ath10k_err(ar, "failed to config sdio: %d\n", ret); + return ret; + } + sdio_claim_host(func); ret = sdio_enable_func(func); @@ -1419,11 +1425,19 @@ static void ath10k_sdio_hif_power_down(struct ath10k *ar) /* Disable the card */ sdio_claim_host(ar_sdio->func); + ret = sdio_disable_func(ar_sdio->func); - sdio_release_host(ar_sdio->func); + if (ret) { + ath10k_warn(ar, "unable to disable sdio function: %d\n", ret); + sdio_release_host(ar_sdio->func); + return; + } + ret = mmc_hw_reset(ar_sdio->func->card->host); if (ret) - ath10k_warn(ar, "unable to disable sdio function: %d\n", ret); + ath10k_warn(ar, "unable to reset sdio: %d\n", ret); + + sdio_release_host(ar_sdio->func); ar_sdio->is_disabled = true; } @@ -2028,12 +2042,6 @@ static int ath10k_sdio_probe(struct sdio_func *func, ath10k_sdio_set_mbox_info(ar); - ret = ath10k_sdio_config(ar); - if (ret) { - ath10k_err(ar, "failed to config sdio: %d\n", ret); - goto err_free_wq; - } - bus_params.dev_type = ATH10K_DEV_TYPE_HL; /* TODO: don't know yet how to get chip_id with SDIO */ bus_params.chip_id = 0; -- 2.30.2