From 540b573875bd26dfe39aa18d22dc195f275fc0df Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Wed, 13 Jul 2011 15:53:30 +0100 Subject: [PATCH] ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state Currently, the documented kernel entry requirements are not explicit about whether the kernel should be entered in ARM or Thumb, leading to an ambiguitity about how to enter Thumb-2 kernels. As a result, the kernel is reliant on the zImage decompressor to enter the kernel proper in the correct instruction set state. This patch changes the boot entry protocol for head.S and Image to be the same as for zImage: in all cases, the kernel is now entered in ARM. Documentation/arm/Booting is updated to reflect this new policy. A different rule will be needed for Cortex-M class CPUs as and when support for those lands in mainline, since these CPUs don't support the ARM instruction set at all: a note is added to the effect that the kernel must be entered in Thumb on such systems. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- Documentation/arm/Booting | 5 +++++ arch/arm/boot/compressed/head.S | 3 ++- arch/arm/kernel/head-nommu.S | 8 ++++++++ arch/arm/kernel/head.S | 8 ++++++++ 4 files changed, 23 insertions(+), 1 deletion(-) diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting index 4e686a2ed91e..a341d87d276e 100644 --- a/Documentation/arm/Booting +++ b/Documentation/arm/Booting @@ -164,3 +164,8 @@ In either case, the following conditions must be met: - The boot loader is expected to call the kernel image by jumping directly to the first instruction of the kernel image. + On CPUs supporting the ARM instruction set, the entry must be + made in ARM state, even for a Thumb-2 kernel. + + On CPUs supporting only the Thumb instruction set such as + Cortex-M class CPUs, the entry must be made in Thumb state. diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index f9da41921c52..51af7091d84d 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -353,7 +353,8 @@ not_relocated: mov r0, #0 mov r0, #0 @ must be zero mov r1, r7 @ restore architecture number mov r2, r8 @ restore atags pointer - mov pc, r4 @ call kernel + ARM( mov pc, r4 ) @ call kernel + THUMB( bx r4 ) @ entry point is always ARM .align 2 .type LC0, #object diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 6b1e0ad9ec3b..d46f25968bec 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -32,8 +32,16 @@ * numbers for r1. * */ + .arm + __HEAD ENTRY(stext) + + THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled #ifndef CONFIG_CPU_CP15 diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 278c1b0ebb2e..742b6108a001 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -71,8 +71,16 @@ * crap here - that's what the boot loader (or in extreme, well justified * circumstances, zImage) is for. */ + .arm + __HEAD ENTRY(stext) + + THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled mrc p15, 0, r9, c0, c0 @ get processor id -- 2.30.2