From 539a5fd62490c22fdd29ddbc2ccfb2fd25cba610 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Mon, 24 Oct 2022 18:55:44 +0200 Subject: [PATCH] ipq40xx: Convert plasmacloud,pa1200 to DSA * ethernet1: - physical port label "Ethernet 1" - its mac address is printed on the device label * ethernet2: - physical port label "Ethernet 2" - can be used to power the device Both ports are not marked by there role (because the vendor firmware automatically detects roles) but the "Ethernet 2" port was used in the past for "WAN" functionality in OpenWrt. Signed-off-by: Sven Eckelmann --- .../ipq40xx/base-files/etc/board.d/02_network | 3 ++ .../arch/arm/boot/dts/qcom-ipq4018-pa1200.dts | 33 ++++++++++++++++--- target/linux/ipq40xx/image/generic.mk | 3 +- 3 files changed, 33 insertions(+), 6 deletions(-) diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index e682a0fb15..dc111044e8 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -77,6 +77,9 @@ ipq40xx_setup_interfaces() openmesh,a62) ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1" ;; + plasmacloud,pa1200) + ucidef_set_interfaces_lan_wan "ethernet1" "ethernet2" + ;; zte,mf286d) ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan" ;; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts index dac4adbd5f..af4a7b196b 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts @@ -17,10 +17,6 @@ status = "okay"; }; - mdio@90000 { - status = "okay"; - }; - tcsr@194b000 { /* select hostmode */ compatible = "qcom,tcsr"; @@ -75,6 +71,7 @@ led-failsafe = &led_status_yellow; led-running = &led_status_cyan; led-upgrade = &led_status_yellow; + label-mac-device = &swport5; }; leds { @@ -183,6 +180,34 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + +&gmac { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + +&swport4 { + status = "okay"; + label = "ethernet2"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_gmac1>; +}; + +&swport5 { + status = "okay"; + label = "ethernet1"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_gmac0>; +}; + &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200"; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 9553931676..8b2851f83e 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -958,8 +958,7 @@ define Device/plasmacloud_pa1200 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata endef -# Missing DSA Setup -#TARGET_DEVICES += plasmacloud_pa1200 +TARGET_DEVICES += plasmacloud_pa1200 define Device/plasmacloud_pa2200 $(call Device/FitImageLzma) -- 2.30.2