From 52221610dd84dc3e9196554f0292ca9e8ab3541d Mon Sep 17 00:00:00 2001 From: Tim Kryger Date: Wed, 25 Jun 2014 00:25:34 -0700 Subject: [PATCH] mmc: sdhci: Improve external VDD regulator support A standard compliant SDHCI can itself supply VDD at 1.8, 3.0, or 3.3v. Several vendors ignore this and instead rely upon external regulators to supply VDD. While the external regulators typically can supply one of the standard SDHCI voltage levels, there is no real reason for this to be a hard requirement. This patch alters the SDHCI driver such that external VDD regulators that provide voltages other than the three mentioned above may be used so long as they can supply a voltage that meets the needs of the card. In the case that an external VDD regulator is provided, it is reasonable to ignore the voltage capabilities of the host controller and allow the external regulator to set the OCR mask. Additionally, there is no need to convert a VDD voltage request into one of the standard SDHCI voltage levels or program it in the host controller's power control register. Signed-off-by: Tim Kryger Tested-by: Sachin Kamat Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index c23a87285a95..07a242675c0e 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1226,6 +1226,13 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, struct mmc_host *mmc = host->mmc; u8 pwr = 0; + if (!IS_ERR(mmc->supply.vmmc)) { + spin_unlock_irq(&host->lock); + mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd); + spin_lock_irq(&host->lock); + return; + } + if (mode != MMC_POWER_OFF) { switch (1 << vdd) { case MMC_VDD_165_195: @@ -1284,12 +1291,6 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) mdelay(10); } - - if (!IS_ERR(mmc->supply.vmmc)) { - spin_unlock_irq(&host->lock); - mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd); - spin_lock_irq(&host->lock); - } } /*****************************************************************************\ @@ -3092,8 +3093,9 @@ int sdhci_add_host(struct sdhci_host *host) SDHCI_MAX_CURRENT_MULTIPLIER; } + /* If OCR set by external regulators, use it instead */ if (mmc->ocr_avail) - ocr_avail &= mmc->ocr_avail; + ocr_avail = mmc->ocr_avail; if (host->ocr_mask) ocr_avail &= host->ocr_mask; -- 2.30.2