From 51f30359783938a1be7ffbd08e508c1b6c9c449f Mon Sep 17 00:00:00 2001 From: Yen-Ting-Shen Date: Fri, 1 Nov 2019 14:00:40 +0800 Subject: [PATCH] ipq40xx: add support for EnGenius EMD1 SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB NOR: 32 MiB ETH: Qualcomm Atheros QCA8072 (1 port) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button LEDS: White, Blue, Red, Orange Flash instruction: From EnGenius firmware to OpenWrt firmware: In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emd1-squashfs-factory.bin directly. From OpenWrt firmware to EnGenius firmware: 1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8 Put the EnGenius firmware in the TFTP server directory on your computer. 2. Power up EMD1. Press 4 and then press any key to enter u-boot. 3. Download EnGenius firmware (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emd1-nor-fw-s.img 4. Flash the firmware (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script 5. Reboot (IPQ40xx) # reset Signed-off-by: Yen-Ting-Shen [removed BOARD_NAME] Signed-off-by: Christian Lamparter --- package/firmware/ipq-wifi/Makefile | 2 + .../ipq-wifi/board-engenius_emd1.qca4019 | Bin 0 -> 24316 bytes .../ipq40xx/base-files/etc/board.d/02_network | 5 + .../etc/hotplug.d/firmware/11-ath10k-caldata | 8 + .../arch/arm/boot/dts/qcom-ipq4018-emd1.dts | 233 ++++++++++++++++++ target/linux/ipq40xx/image/Makefile | 13 + .../901-arm-boot-add-dts-files.patch | 3 +- 7 files changed, 263 insertions(+), 1 deletion(-) create mode 100644 package/firmware/ipq-wifi/board-engenius_emd1.qca4019 create mode 100644 target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-emd1.dts diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index 065cda160d..eada8baf6f 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -28,6 +28,7 @@ ALLWIFIBOARDS:= \ aruba_ap-303 \ avm_fritzrepeater-1200 \ dlink_dap2610 \ + engenius_emd1 \ ezviz_cs-w3-wd1200g-eup \ linksys_ea8300 \ qxwlan_e2600ac @@ -96,6 +97,7 @@ endef $(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303)) $(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200)) $(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610)) +$(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1)) $(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP)) $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300)) $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC)) diff --git a/package/firmware/ipq-wifi/board-engenius_emd1.qca4019 b/package/firmware/ipq-wifi/board-engenius_emd1.qca4019 new file mode 100644 index 0000000000000000000000000000000000000000..3a2d77597df2899722962245a3832e45b9f3bfa2 GIT binary patch literal 24316 zcmeHPdr(tX8b1UOb+K|ocnEk2;TeShfohZ}PmxDNi;4tT1nPsN26-3|Ll^A$pb$}k zDi8vZ(#WeRBIDupYTaDoZ|Fn=Qg*NkUeE(aS5fQX2QAD=$85wezmpZ|O| znoPDV<9=pX?@aG=j+hBNhcdm*bbTc_&W;7K33hNT#1GjQi;>jzW%TSL)(--;<#_Gh zLr1`#{DB5GZk)_mOlmEf<>268Z*Ol)5ddymuu>N|95uPZIyF&eGe=(u#hiYxL!aV? z0c_h$iebc~1FHJU{aLBWg3+t0rb=1XuH?AUKGo^EQpsD%>qh&bRwhYLe)DH2_rKr< zg3*svb(IBK$*^%yb*@s9wIg}+XfM_c+62&{zOEumlpKXSJP2F^Mz5&Oz!|nBZy5aq zI!JK`EgYmUD^(B#hij}X&Po@AO*#Y`#`l6+C6pI*F>IzC4Dm2tTL>r_U)k$r?XJ(S z*swn^!z=Y}Q)zXgjJMY%?si{EYvSpkQun;p{_NHbr`cuB`P#aC`G$gkovV{?ohz!^ zA_>lR+5CBL<;Cr%d1b5LzR_RNx~)E>!t22BnZl!+_j5Cl4L4!G1Sv1udGlqhq$R0t zZG~sy^^eOtL#w@uo%3EVl;~(l1neD_{c6QZ#M#AdmFH^m1)ox4ud%-*a2$9;gk=l{ z!v@Q3ZQ;M=C6nUNQrATu*Pjl=PV zbN=+x)9)uHusa|D*WZ`0{pb6yzN6Z(j;kFV7{f4G4QW=<321Y;^ zDLtgLbbJVZ{Y6XK4>p>e#phjB;>n!-yF#h@`r z63R#UJpMyIvJu_L+b9Y{!w>;V2GOFPil;?QM$`nYKtqPo({5bVPIc%q-od!lgd4di zP3M$mplYY&BjX*6Tc^CVR5ubzlcjzzJ?l=)_Iit=`oDomdljkXlN8_KwBdKUA zFI5zQMm&i?qR=Q_l;~JB+!`&|RcYvgsj201J2qGwk#}Ls&`>Re-ib*Ek$;3qH`PMu z`smu)i1?@$LdW)Q@%!-lQg5ug#E5ug#E5ug!R#0a?Y-4Ji)R{mCGJ99mMJrd1aN(x9XXzUugN6m$^ zl9_WXBgJZSEaFQ@FWo`}p3M*o2binw=AICk+i$MooTG6?IfcsMM*zU`s8TchXnHw6 zKl7%eves$D9BnJB4I2Xx;QSr827qu70QouIkPYMqNl+Y^u<{%;9G=v8d0{((D$US7 z)5_uGH2DFczy|zy7=UI6#3m*ZfS{!a5CWlH-Vy{bTo}u9VCm$9A39oX9rQr+4}s@{ zjx2`VK6nBFPnQ{XOD{sX1ci)r1j@_UM49l#RWtmhsWLFY-|tl>;^dAvt0PY5L_2n6 z=H%@wRGw>YY1ef33=9sB-2U|bmyaxO0JFMneVv>Dehw;P){-Zo_!+1uu9iFn#m_%Q z{95t^)N&9_dMtc&U#Fe0fMPZ0%s4G0_dvsi4z2Fm*cYbs1q6w~Qdko##0&M}d5Ksc zVIlz$p(370lmH?pA`u}fmTCaDVh1&H#7OKt%E&ciW)`DgfSrzJPNto-@w!EZtKo=N;QF&z zEPy3aTwPrOmPoO%z5)vAI@^*1mY8sjVQE;uW8HCKyY6tUaUIl0X`=sh^FIjrY`WdB z-rhbw-mY!(R-Xdz@H}k?-}& z)F(H$$TwtWDOTs)Q|R|yQ!xpJQ^C;cjO$|#B<6g6LVO2;n&VRu(9d~}y*N_&_L%;X zlzV?sCiX%1?MH_1F!VKS&R>$RhsK)K<%$e(=-1cBRO%{4u2?X3O?^R8B2EicOcV2l|nl2XThSeIWRGcOV9{a7jQ6Uq@3D}s! z?Yn`20PiMMWGFJmZ|K^Ua_LU-dfg4>1!-wgf`AVlniPjfhta!%Trhr1*P$$jx-q3ndL(H}kUKuZJJM_-q_Mj&r19%ImHN0+Cfzc2Mc1XSgU)HXo61&c zc~Vl4=h%q)13V;eETlX4g17)KwNrOiEm!8jkksmv$`XZGcSYSPl_kXrLdS3Fx|EgD zJpvEHfg6CWp;3KIc|ef{8#|Oor8~r-FpyS-T%0Q4j$hNYDNCi>ll(A;Pw#ReN>|5P z)n&?DMZ)+9Y%EjcNK;^#mmrog0u;8kt1G1ONvm*&`*01G$UMB&r$aL50@5haD49TD zA#4p3OQX$;7J-(bqRY|EA+?_6mvp~YC7cbcT2*x9LgEQ-iARBB;+^jOXErH(54wpj z4IQ~0*A!aoDIXdk%yNKeUynD@A)%-#3;Bu&vZzK7g%tNM3$gw%SJzmeZJSn**@Lr|4lp;DE0 zGW>|ko)ufJ_ZBp6tY*LClKt6rMc;N+;Bi-(?uxuCs*Y36+*{YW{ZwSRyVx=5YX9C3 z1n+svTynKKNoT@Ywj9ap?JrXcPjX6}#KWDX4e?dMGS~D6pQO|WSFSqXw5NCQpeC`= z?-=VqOJ7k(bX~wvR{rHyN$qC&nuE@%+MdI0Q73#$S-EY!`K___K4r|@X04=6c*?iT zIp<8no_8aqoNQ*yP+wVl+L@pV_x+1@F_sgs{hY|Q`6ODjT1ZGg~pH1s# zF5$!4{icPn*s3(=e*Qj92jh^>^)r6v|9&U9_5qMZ(+#OZevU9f7EBD};4kmy)?g{+ zuD-;1^9;L5-aN2LfQ+d%8~jS<|2pXirz3!I;_VNDd*mD z5a*|d$qQx02FrJe<&&G-C01-O+?SM^73VPL%-9sqo@#H?YTG*|A3R6ZHCk;~w-GzF z4^@ZXd2++P_cSSPq@q@82o}plH@p?q +#include +#include + +/ { + model = "EnGenius EMD1"; + compatible = "engenius,emd1"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + switch_lan_bmp = <0x20>; + switch_wan_bmp = <0x00>; + }; + + edma@c080000 { + status = "okay"; + qcom,num_gmac = <1>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "emd1:white:power"; + gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "emd1:red:wlan2g"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5g { + label = "emd1:blue:wlan5g"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + + mesh { + label = "emd1:orange:mesh"; + gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio54", "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition0@0 { + label = "0:SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition1@40000 { + label = "0:MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition2@60000 { + label = "0:QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition3@c0000 { + label = "0:CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition4@d0000 { + label = "0:DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition5@e0000 { + label = "0:APPSBLENV"; + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition6@f0000 { + label = "0:APPSBL"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + partition7@170000 { + label = "0:ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + partition8@180000 { + label = "userconfig"; + reg = <0x00180000 0x00080000>; + read-only; + }; + partition9@200000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x200000 0x01e00000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gmac0 { + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <1 0x20>; +}; + +&cryptobam { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-EMD1"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-EMD1"; +}; diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index 41a65280c3..bbe4df9df4 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -278,6 +278,19 @@ define Device/engenius_eap1300 endef TARGET_DEVICES += engenius_eap1300 +define Device/engenius_emd1 + $(call Device/FitImage) + DEVICE_VENDOR := EnGenius + DEVICE_MODEL := EMD1 + DEVICE_DTS_CONFIG := config@4 + SOC := qcom-ipq4018 + IMAGE_SIZE := 30720k + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata + IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += engenius_emd1 + define Device/engenius_ens620ext $(call Device/FitImage) DEVICE_VENDOR := EnGenius diff --git a/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch index 9c9a31e436..11e775a5dc 100644 --- a/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -785,11 +785,41 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -785,11 +785,42 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -20,6 +20,7 @@ Signed-off-by: John Crispin + qcom-ipq4018-cs-w3-wd1200g-eup.dtb \ + qcom-ipq4018-ea6350v3.dtb \ + qcom-ipq4018-eap1300.dtb \ ++ qcom-ipq4018-emd1.dtb \ + qcom-ipq4018-ens620ext.dtb \ + qcom-ipq4018-ex6100v2.dtb \ + qcom-ipq4018-ex6150v2.dtb \ -- 2.30.2