From 51100cfccac710367249515f685f1a33c95cceb4 Mon Sep 17 00:00:00 2001 From: Ajay Bhargav <[ajay.bhargav@einfochips.com]> Date: Mon, 3 Oct 2011 14:00:57 +0530 Subject: [PATCH] SPI: Add SPI driver support for Marvell Armada100 This patch provides support for SPI emulated over SSP for Marvell Armada100 SOC. Signed-off-by: Ajay Bhargav --- arch/arm/include/asm/arch-armada100/spi.h | 95 +++++++++ drivers/spi/Makefile | 1 + drivers/spi/armada100_spi.c | 228 ++++++++++++++++++++++ 3 files changed, 324 insertions(+) create mode 100644 arch/arm/include/asm/arch-armada100/spi.h create mode 100644 drivers/spi/armada100_spi.c diff --git a/arch/arm/include/asm/arch-armada100/spi.h b/arch/arm/include/asm/arch-armada100/spi.h new file mode 100644 index 0000000000..58f0d8f7f3 --- /dev/null +++ b/arch/arm/include/asm/arch-armada100/spi.h @@ -0,0 +1,95 @@ +/* + * (C) Copyright 2011 + * eInfochips Ltd. + * Written-by: Ajay Bhargav + * + * (C) Copyright 2010 + * Marvell Semiconductor + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __ARMADA100_SPI_H_ +#define __ARMADA100_SPI_H_ + +#include + +#define CAT_BASE_ADDR(x) ARMD1_SSP ## x ## _BASE +#define SSP_REG_BASE(x) CAT_BASE_ADDR(x) + +/* + * SSP Serial Port Registers + * refer Appendix A.26 + */ +struct ssp_reg { + u32 sscr0; /* SSP Control Register 0 - 0x000 */ + u32 sscr1; /* SSP Control Register 1 - 0x004 */ + u32 sssr; /* SSP Status Register - 0x008 */ + u32 ssitr; /* SSP Interrupt Test Register - 0x00C */ + u32 ssdr; /* SSP Data Register - 0x010 */ + u32 pad1[5]; + u32 ssto; /* SSP Timeout Register - 0x028 */ + u32 sspsp; /* SSP Programmable Serial Protocol Register - 0x02C */ + u32 sstsa; /* SSP TX Timeslot Active Register - 0x030 */ + u32 ssrsa; /* SSP RX Timeslot Active Register - 0x034 */ + u32 sstss; /* SSP Timeslot Status Register - 0x038 */ +}; + +#define DEFAULT_WORD_LEN 8 +#define SSP_FLUSH_NUM 0x2000 +#define RX_THRESH_DEF 8 +#define TX_THRESH_DEF 8 +#define TIMEOUT_DEF 1000 + +#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ +#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ +#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ +#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity + setting */ +#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ +#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ +#define SSCR1_TFT 0x03c0 /* Transmit FIFO Threshold (mask) */ +#define SSCR1_RFT 0x3c00 /* Receive FIFO Threshold (mask) */ + +#define SSCR1_TXTRESH(x) ((x - 1) << 6) /* level [1..16] */ +#define SSCR1_RXTRESH(x) ((x - 1) << 10) /* level [1..16] */ +#define SSCR1_TINTE (1 << 19) /* Receiver Time-out + Interrupt enable */ + +#define SSCR0_DSS 0x0f /* Data Size Select (mask) */ +#define SSCR0_DATASIZE(x) (x - 1) /* Data Size Select [4..16] */ +#define SSCR0_FRF 0x30 /* FRame Format (mask) */ +#define SSCR0_MOTO (0x0 << 4) /* Motorola's Serial + Peripheral Interface */ +#define SSCR0_TI (0x1 << 4) /* TI's Synchronous + Serial Protocol (SSP) */ +#define SSCR0_NATIONAL (0x2 << 4) /* National Microwire */ +#define SSCR0_ECS (1 << 6) /* External clock select */ +#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port + Enable */ + +#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ +#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ +#define SSSR_BSY (1 << 4) /* SSP Busy */ +#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ +#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ +#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ +#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ + +#endif /* __ARMADA100_SPI_H_ */ diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 96c96423f1..84ad6fade0 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -27,6 +27,7 @@ LIB := $(obj)libspi.o COBJS-$(CONFIG_ALTERA_SPI) += altera_spi.o COBJS-$(CONFIG_ANDES_SPI) += andes_spi.o +COBJS-$(CONFIG_ARMADA100_SPI) += armada100_spi.o COBJS-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o diff --git a/drivers/spi/armada100_spi.c b/drivers/spi/armada100_spi.c new file mode 100644 index 0000000000..7384c9cd2c --- /dev/null +++ b/drivers/spi/armada100_spi.c @@ -0,0 +1,228 @@ +/* + * (C) Copyright 2011 + * eInfochips Ltd. + * Written-by: Ajay Bhargav + * + * (C) Copyright 2009 + * Marvell Semiconductor + * Based on SSP driver + * Written-by: Lei Wen + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + + +#include +#include +#include + +#include +#include +#include + +#define to_armd_spi_slave(s) container_of(s, struct armd_spi_slave, slave) + +struct armd_spi_slave { + struct spi_slave slave; + struct ssp_reg *spi_reg; + u32 cr0, cr1; + u32 int_cr1; + u32 clear_sr; + const void *tx; + void *rx; + int gpio_cs_inverted; +}; + +static int spi_armd_write(struct armd_spi_slave *pss) +{ + int wait_timeout = SSP_FLUSH_NUM; + while (--wait_timeout && !(readl(&pss->spi_reg->sssr) & SSSR_TNF)) + ; + if (!wait_timeout) { + debug("%s: timeout error\n", __func__); + return -1; + } + + if (pss->tx != NULL) { + writel(*(u8 *)pss->tx, &pss->spi_reg->ssdr); + ++pss->tx; + } else { + writel(0, &pss->spi_reg->ssdr); + } + return 0; +} + +static int spi_armd_read(struct armd_spi_slave *pss) +{ + int wait_timeout = SSP_FLUSH_NUM; + while (--wait_timeout && !(readl(&pss->spi_reg->sssr) & SSSR_RNE)) + ; + if (!wait_timeout) { + debug("%s: timeout error\n", __func__); + return -1; + } + + if (pss->rx != NULL) { + *(u8 *)pss->rx = readl(&pss->spi_reg->ssdr); + ++pss->rx; + } else { + readl(&pss->spi_reg->ssdr); + } + return 0; +} + +static int spi_armd_flush(struct armd_spi_slave *pss) +{ + unsigned long limit = SSP_FLUSH_NUM; + + do { + while (readl(&pss->spi_reg->sssr) & SSSR_RNE) + readl(&pss->spi_reg->ssdr); + } while ((readl(&pss->spi_reg->sssr) & SSSR_BSY) && limit--); + + writel(SSSR_ROR, &pss->spi_reg->sssr); + + return limit; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + struct armd_spi_slave *pss = to_armd_spi_slave(slave); + + gpio_set_value(slave->cs, pss->gpio_cs_inverted); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct armd_spi_slave *pss = to_armd_spi_slave(slave); + + gpio_set_value(slave->cs, !pss->gpio_cs_inverted); +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct armd_spi_slave *pss; + + pss = malloc(sizeof(*pss)); + if (!pss) + return NULL; + + pss->slave.bus = bus; + pss->slave.cs = cs; + pss->spi_reg = (struct ssp_reg *)SSP_REG_BASE(CONFIG_SYS_SSP_PORT); + + pss->cr0 = SSCR0_MOTO | SSCR0_DATASIZE(DEFAULT_WORD_LEN) | SSCR0_SSE; + + pss->cr1 = (SSCR1_RXTRESH(RX_THRESH_DEF) & SSCR1_RFT) | + (SSCR1_TXTRESH(TX_THRESH_DEF) & SSCR1_TFT); + pss->cr1 &= ~(SSCR1_SPO | SSCR1_SPH); + pss->cr1 |= (((mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0) + | (((mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0); + + pss->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE; + pss->clear_sr = SSSR_ROR | SSSR_TINT; + + pss->gpio_cs_inverted = mode & SPI_CS_HIGH; + gpio_set_value(cs, !pss->gpio_cs_inverted); + + return &pss->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct armd_spi_slave *pss = to_armd_spi_slave(slave); + + free(pss); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct armd_spi_slave *pss = to_armd_spi_slave(slave); + + debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + if (spi_armd_flush(pss) == 0) + return -1; + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct armd_spi_slave *pss = to_armd_spi_slave(slave); + uint bytes = bitlen / 8; + unsigned long limit; + int ret = 0; + + if (bitlen == 0) + goto done; + + /* we can only do 8 bit transfers */ + if (bitlen % 8) { + flags |= SPI_XFER_END; + goto done; + } + + if (dout) + pss->tx = dout; + else + pss->tx = NULL; + + if (din) + pss->rx = din; + else + pss->rx = NULL; + + if (flags & SPI_XFER_BEGIN) { + spi_cs_activate(slave); + writel(pss->cr1 | pss->int_cr1, &pss->spi_reg->sscr1); + writel(TIMEOUT_DEF, &pss->spi_reg->ssto); + writel(pss->cr0, &pss->spi_reg->sscr0); + } + + while (bytes--) { + limit = SSP_FLUSH_NUM; + ret = spi_armd_write(pss); + if (ret) + break; + + while ((readl(&pss->spi_reg->sssr) & SSSR_BSY) && limit--) + udelay(1); + + ret = spi_armd_read(pss); + if (ret) + break; + } + + done: + if (flags & SPI_XFER_END) { + /* Stop SSP */ + writel(pss->clear_sr, &pss->spi_reg->sssr); + clrbits_le32(&pss->spi_reg->sscr1, pss->int_cr1); + writel(0, &pss->spi_reg->ssto); + spi_cs_deactivate(slave); + } + + return ret; +} -- 2.30.2