From 4f07966696134b270e821246c8fd4624c238f1f6 Mon Sep 17 00:00:00 2001 From: Joao Henrique Albuquerque Date: Fri, 14 Aug 2020 12:04:02 -0300 Subject: [PATCH] ath79: add support for COMFAST CF-E375AC COMFAST CF-E375AC is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9563 + QCA9886 + QCA8337. Short specification: 2x 10/100/1000 Mbps Ethernet, with PoE support 128MB of RAM (DDR2) 16 MB of FLASH 3T3R 2.4 GHz, 802.11b/g/n 2T2R 5 GHz, 802.11ac/n/a, wave 2 built-in 5x 3 dBi antennas output power (max): 500 mW (27 dBm) 1x RGB LED, 1x button built-in watchdog chipset Flash instruction: 1) Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. 2) TFTP 2.1) Set a tftp server on your machine with a fixed IP address of 192.168.1.10. A place the sysupgrade as firmware_auto.bin. 2.2) boot the device with an ethernet connection on fixed ip route 2.3) wait a few seconds and try to login via ssh 3) TFTP trough Bootloader 3.1) open the device case and get a uart connection working 3.2) stop the autoboot process and test connection with serverip 3.3) name the sysupgrade image firmware.bin and run firmware_upg MAC addresses: Though the OEM firmware has four adresses in the usual locations, it appears that the assigned addresses are just incremented in a different way: interface address location LAN: *:DC 0x0 WAN *:DD 0x1002 WLAN 2.4g *:E6 n/a (0x0 + 10) WLAN 5g *:DE 0x6 unused *:DF 0x5006 The MAC address pointed at the label is the one assign to the LAN interface. Signed-off-by: Joao Henrique Albuquerque [add label-mac-device, remove redundant uart status, fix whitespace issues, fix commit message wrapping, remove x bit on DTS file] Signed-off-by: Adrian Schmutzler --- .../ath79/dts/qca9563_comfast_cf-e375ac.dts | 137 ++++++++++++++++++ .../generic/base-files/etc/board.d/01_leds | 4 + .../generic/base-files/etc/board.d/02_network | 7 + .../etc/hotplug.d/firmware/11-ath10k-caldata | 1 + target/linux/ath79/image/generic.mk | 10 ++ 5 files changed, 159 insertions(+) create mode 100644 target/linux/ath79/dts/qca9563_comfast_cf-e375ac.dts diff --git a/target/linux/ath79/dts/qca9563_comfast_cf-e375ac.dts b/target/linux/ath79/dts/qca9563_comfast_cf-e375ac.dts new file mode 100644 index 0000000000..1eeb02f7f9 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_comfast_cf-e375ac.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca956x.dtsi" + +#include +#include + +/ { + model = "COMFAST CF-E375AC"; + compatible = "comfast,cf-e375ac", "qca,qca9563"; + + aliases { + label-mac-device = ð0; + led-boot = &led_lan; + led-failsafe = &led_lan; + led-running = &led_lan; + led-upgrade = &led_lan; + }; + + leds { + compatible = "gpio-leds"; + + led_lan: lan { + label = "green:lan"; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "red:wan"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + + wlan2g { + label = "blue:wlan2g"; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + linux,code = ; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + watchdog { + compatible = "linux,wdt-gpio"; + + gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; + hw_algo = "toggle"; + hw_margin_ms = <500>; + always-running; + }; +}; + +&pcie { + status = "okay"; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + art: partition@40000 { + label = "art"; + reg = <0x040000 0x010000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0xfa0000>; + }; + + partition@ff0000 { + label = "art-backup"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "sgmii"; + qca,mib-poll-interval = <500>; + + qca,ar8327-initvals = < + 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ + 0x7c 0x0000007e /* PORT0_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x03000101 0x00000101 0x00001919>; + + phy-mode = "sgmii"; + mtd-mac-address = <&art 0x0>; + phy-handle = <&phy0>; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x0>; + mtd-mac-address-increment = <10>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 783b55ec32..827055bc1f 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -132,6 +132,10 @@ comfast,cf-e314n-v2) ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimediumhigh" "wlan0" "51" "100" ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan0" "76" "100" ;; +comfast,cf-e375ac) + ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x04" + ucidef_set_led_switch "wan" "WAN" "red:wan" "switch0" "0x02" + ;; comfast,cf-e5) ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x02" ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 52e773fea3..4133b9d7d3 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -186,6 +186,10 @@ ath79_setup_interfaces() ubnt,routerstation) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; + comfast,cf-e375ac) + ucidef_add_switch "switch0" \ + "0@eth0" "1:wan" "2:lan" + ;; comfast,cf-e560ac) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ @@ -487,6 +491,9 @@ ath79_setup_macs() lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)")) ;; + comfast,cf-e375ac) + wan_mac=$(macaddr_add $(mtd_get_mac_binary art 0x0) 1) + ;; compex,wpj344-16m|\ compex,wpj563) wan_mac=$(mtd_get_mac_binary u-boot 0x2e018) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 5a44dd94e5..9e4b4496e5 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -173,6 +173,7 @@ case "$FIRMWARE" in /lib/firmware/ath10k/QCA9888/hw2.0/board.bin rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin ;; + comfast,cf-e375ac|\ comfast,cf-e560ac|\ comfast,cf-ew72|\ comfast,cf-wr752ac-v1) diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 222a1511a7..8c21fdc7f0 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -553,6 +553,16 @@ define Device/comfast_cf-e314n-v2 endef TARGET_DEVICES += comfast_cf-e314n-v2 +define Device/comfast_cf-e375ac + SOC := qca9563 + DEVICE_VENDOR := COMFAST + DEVICE_MODEL := CF-E375AC + DEVICE_PACKAGES := kmod-ath10k-ct \ + ath10k-firmware-qca9888-ct -uboot-envtools + IMAGE_SIZE := 16000k +endef +TARGET_DEVICES += comfast_cf-e375ac + define Device/comfast_cf-e5 SOC := qca9531 DEVICE_VENDOR := COMFAST -- 2.30.2