From 4e6da7969ffecf52a974b165975eb6a3149eeb73 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Marek=20Beh=C3=BAn?= Date: Mon, 26 Aug 2019 23:31:50 +0200 Subject: [PATCH] net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handler MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The mv88e6390_serdes_irq_link_sgmii IRQ handler reads the SERDES PHY status register to determine speed, among other things. If cmode of the port is set to 2500base-x, though, the PHY still reports 1000 Mbps (the PHY register itself does not differentiate between 1000 Mbps and 2500 Mbps - it thinks it is running at 1000 Mbps, although clock is 2.5x faster). Look at the cmode and set SPEED_2500 if cmode is set to 2500base-x. Also tell mv88e6xxx_port_setup_mac the PHY interface mode corresponding to current cmode in terms of phy_interface_t. Signed-off-by: Marek Behún Reviewed-by: Andrew Lunn Tested-by: Vivien Didelot Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/serdes.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c index 20c526c2a9ee..678aaba3d019 100644 --- a/drivers/net/dsa/mv88e6xxx/serdes.c +++ b/drivers/net/dsa/mv88e6xxx/serdes.c @@ -505,9 +505,11 @@ int mv88e6390x_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on) static void mv88e6390_serdes_irq_link_sgmii(struct mv88e6xxx_chip *chip, int port, int lane) { + u8 cmode = chip->ports[port].cmode; struct dsa_switch *ds = chip->ds; int duplex = DUPLEX_UNKNOWN; int speed = SPEED_UNKNOWN; + phy_interface_t mode; int link, err; u16 status; @@ -527,7 +529,10 @@ static void mv88e6390_serdes_irq_link_sgmii(struct mv88e6xxx_chip *chip, switch (status & MV88E6390_SGMII_PHY_STATUS_SPEED_MASK) { case MV88E6390_SGMII_PHY_STATUS_SPEED_1000: - speed = SPEED_1000; + if (cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX) + speed = SPEED_2500; + else + speed = SPEED_1000; break; case MV88E6390_SGMII_PHY_STATUS_SPEED_100: speed = SPEED_100; @@ -541,8 +546,22 @@ static void mv88e6390_serdes_irq_link_sgmii(struct mv88e6xxx_chip *chip, } } + switch (cmode) { + case MV88E6XXX_PORT_STS_CMODE_SGMII: + mode = PHY_INTERFACE_MODE_SGMII; + break; + case MV88E6XXX_PORT_STS_CMODE_1000BASE_X: + mode = PHY_INTERFACE_MODE_1000BASEX; + break; + case MV88E6XXX_PORT_STS_CMODE_2500BASEX: + mode = PHY_INTERFACE_MODE_2500BASEX; + break; + default: + mode = PHY_INTERFACE_MODE_NA; + } + err = mv88e6xxx_port_setup_mac(chip, port, link, speed, duplex, - PAUSE_OFF, PHY_INTERFACE_MODE_NA); + PAUSE_OFF, mode); if (err) dev_err(chip->dev, "can't propagate PHY settings to MAC: %d\n", err); -- 2.30.2