From 4ca560a6d31d1deae004a9977adf64766e87a021 Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Tue, 16 Dec 2014 14:56:28 +0100 Subject: [PATCH] Documentation: usb: EEM function testing Summary of how to test EEM function of USB gadget. Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Felipe Balbi --- Documentation/usb/gadget-testing.txt | 34 ++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt index b40db750890f..50b0a6cc6674 100644 --- a/Documentation/usb/gadget-testing.txt +++ b/Documentation/usb/gadget-testing.txt @@ -4,6 +4,7 @@ provided by gadgets. 1. ACM function 2. ECM function 3. ECM subset function +4. EEM function 1. ACM function @@ -100,3 +101,36 @@ Configure IP addresses of the device and the host. Then: On the device: ping On the host: ping + +4. EEM function +=============== + +The function is provided by usb_f_eem.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "eem". +The EEM function provides these attributes in its function directory: + + ifname - network device interface name associated with this + function instance + qmult - queue length multiplier for high and super speed + host_addr - MAC address of host's end of this + Ethernet over USB link + dev_addr - MAC address of device's end of this + Ethernet over USB link + +and after creating the functions/eem. they contain default +values: qmult is 5, dev_addr and host_addr are randomly selected. +Except for ifname they can be written to until the function is linked to a +configuration. The ifname is read-only and contains the name of the interface +which was assigned by the net core, e. g. usb0. + +Testing the EEM function +------------------------ + +Configure IP addresses of the device and the host. Then: + +On the device: ping +On the host: ping -- 2.30.2