From 4c010932a5fa12b150dfcde773f291e6f906ec60 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 14 Aug 2023 18:45:59 +0200 Subject: [PATCH] ipq40xx: 6.1: adapt and refresh patches Adapt and refresh patches to apply. DSA and ethernet driver patches are dropped as they will be replaced with the latest version that was sent upstream. Signed-off-by: Robert Marko --- ...d-set-ipq40xx-watchdog-to-allow-boot.patch | 2 +- ...msm-use-sdhci_set_clock-instead-of-s.patch | 2 +- ...are-qcom-scm-Add-SDI-disable-support.patch | 4 +- ...-qcom-scm-disable-SDI-on-Google-WiFi.patch | 2 +- ...e-qcom-scm-fix-SCM-cold-boot-address.patch | 10 +- ...pecific-data-to-struct-skb_shared_in.patch | 43 ---- ...019-add-shinfo-based-tagging-driver-.patch | 187 ------------------ ...ethernet-qualcomm-add-IPQESS-support.patch | 43 ---- ...phy-define-PSGMII-PHY-interface-mode.patch | 69 ------- ...comm-IPQ4019-built-in-switch-support.patch | 57 ------ .../706-arm-dts-ipq4019-add-switch-node.patch | 8 +- .../707-dt-bindings-net-add-QCA807x-PHY.patch | 2 +- ...8-net-phy-Add-Qualcom-QCA807x-driver.patch | 21 +- ...9-arm-dts-ipq4019-QCA807x-properties.patch | 8 +- .../850-soc-add-qualcomm-syscon.patch | 27 ++- ...qcom_scm-Clear-download-bit-during-r.patch | 2 +- .../999-atm-mpoa-intel-dsl-phy-support.patch | 8 +- 17 files changed, 46 insertions(+), 449 deletions(-) delete mode 100644 target/linux/ipq40xx/patches-6.1/700-skbuff-add-DSA-specific-data-to-struct-skb_shared_in.patch delete mode 100644 target/linux/ipq40xx/patches-6.1/701-net-dsa-tag_ipq4019-add-shinfo-based-tagging-driver-.patch delete mode 100644 target/linux/ipq40xx/patches-6.1/702-net-ethernet-qualcomm-add-IPQESS-support.patch delete mode 100644 target/linux/ipq40xx/patches-6.1/704-net-phy-define-PSGMII-PHY-interface-mode.patch delete mode 100644 target/linux/ipq40xx/patches-6.1/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch diff --git a/target/linux/ipq40xx/patches-6.1/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch b/target/linux/ipq40xx/patches-6.1/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch index 51891c1f22..4939c56470 100644 --- a/target/linux/ipq40xx/patches-6.1/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch +++ b/target/linux/ipq40xx/patches-6.1/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch @@ -22,7 +22,7 @@ Signed-off-by: John Thomson --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S -@@ -624,6 +624,41 @@ not_relocated: mov r0, #0 +@@ -620,6 +620,41 @@ not_relocated: mov r0, #0 bic r4, r4, #1 blne cache_on diff --git a/target/linux/ipq40xx/patches-6.1/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch b/target/linux/ipq40xx/patches-6.1/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch index 3a3be91709..bf36164aed 100644 --- a/target/linux/ipq40xx/patches-6.1/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch +++ b/target/linux/ipq40xx/patches-6.1/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch @@ -13,7 +13,7 @@ Signed-off-by: Robert Marko --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c -@@ -2447,7 +2447,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat +@@ -2451,7 +2451,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat static const struct sdhci_ops sdhci_msm_ops = { .reset = sdhci_msm_reset, diff --git a/target/linux/ipq40xx/patches-6.1/420-firmware-qcom-scm-Add-SDI-disable-support.patch b/target/linux/ipq40xx/patches-6.1/420-firmware-qcom-scm-Add-SDI-disable-support.patch index e4ee745ff1..732f3c50fb 100644 --- a/target/linux/ipq40xx/patches-6.1/420-firmware-qcom-scm-Add-SDI-disable-support.patch +++ b/target/linux/ipq40xx/patches-6.1/420-firmware-qcom-scm-Add-SDI-disable-support.patch @@ -18,7 +18,7 @@ Acked-by: Mukesh Ojha --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c -@@ -389,6 +389,29 @@ int qcom_scm_set_remote_state(u32 state, +@@ -400,6 +400,29 @@ int qcom_scm_set_remote_state(u32 state, } EXPORT_SYMBOL(qcom_scm_set_remote_state); @@ -56,5 +56,5 @@ Acked-by: Mukesh Ojha #define QCOM_SCM_BOOT_TERMINATE_PC 0x02 +#define QCOM_SCM_BOOT_SDI_CONFIG 0x09 #define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10 + #define QCOM_SCM_BOOT_SET_ADDR_MC 0x11 #define QCOM_SCM_BOOT_SET_REMOTE_STATE 0x0a - #define QCOM_SCM_FLUSH_FLAG_MASK 0x3 diff --git a/target/linux/ipq40xx/patches-6.1/421-firmware-qcom-scm-disable-SDI-on-Google-WiFi.patch b/target/linux/ipq40xx/patches-6.1/421-firmware-qcom-scm-disable-SDI-on-Google-WiFi.patch index 98f02934a9..ff788c5c56 100644 --- a/target/linux/ipq40xx/patches-6.1/421-firmware-qcom-scm-disable-SDI-on-Google-WiFi.patch +++ b/target/linux/ipq40xx/patches-6.1/421-firmware-qcom-scm-disable-SDI-on-Google-WiFi.patch @@ -18,7 +18,7 @@ Signed-off-by: Brian Norris --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c -@@ -1337,6 +1337,13 @@ static int qcom_scm_probe(struct platfor +@@ -1435,6 +1435,13 @@ static int qcom_scm_probe(struct platfor if (download_mode) qcom_scm_set_download_mode(true); diff --git a/target/linux/ipq40xx/patches-6.1/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch b/target/linux/ipq40xx/patches-6.1/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch index a31ea69e89..a92342215e 100644 --- a/target/linux/ipq40xx/patches-6.1/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch +++ b/target/linux/ipq40xx/patches-6.1/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch @@ -53,7 +53,7 @@ Signed-off-by: Brian Norris /** * scm_legacy_call() - Sends a command to the SCM and waits for the command to * finish processing. -@@ -160,10 +182,16 @@ int scm_legacy_call(struct device *dev, +@@ -163,10 +185,16 @@ int scm_legacy_call(struct device *dev, rsp = scm_legacy_command_to_response(cmd); @@ -74,7 +74,7 @@ Signed-off-by: Brian Norris } smc.args[0] = 1; -@@ -179,13 +207,26 @@ int scm_legacy_call(struct device *dev, +@@ -182,13 +210,26 @@ int scm_legacy_call(struct device *dev, goto out; do { @@ -106,7 +106,7 @@ Signed-off-by: Brian Norris if (res) { res_buf = scm_legacy_get_response_buffer(rsp); -@@ -193,7 +234,8 @@ int scm_legacy_call(struct device *dev, +@@ -196,7 +237,8 @@ int scm_legacy_call(struct device *dev, res->result[i] = le32_to_cpu(res_buf[i]); } out: @@ -118,7 +118,7 @@ Signed-off-by: Brian Norris } --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c -@@ -344,6 +344,17 @@ int qcom_scm_set_cold_boot_addr(void *en +@@ -305,6 +305,17 @@ static int qcom_scm_set_boot_addr(void * desc.args[0] = flags; desc.args[1] = virt_to_phys(entry); @@ -135,4 +135,4 @@ Signed-off-by: Brian Norris + return qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL); } - EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr); + diff --git a/target/linux/ipq40xx/patches-6.1/700-skbuff-add-DSA-specific-data-to-struct-skb_shared_in.patch b/target/linux/ipq40xx/patches-6.1/700-skbuff-add-DSA-specific-data-to-struct-skb_shared_in.patch deleted file mode 100644 index 385364c076..0000000000 --- a/target/linux/ipq40xx/patches-6.1/700-skbuff-add-DSA-specific-data-to-struct-skb_shared_in.patch +++ /dev/null @@ -1,43 +0,0 @@ -From da75807ac41175e9db8c95f7a172b4133763b744 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Mon, 11 Jan 2021 17:49:36 +0100 -Subject: [PATCH] skbuff: add DSA specific data to struct skb_shared_info - -All of the already existing DSA tagging protocol drivers -are storing the tagging data directly into the skb. In most -cases that is the only way to send the required information -to the underlying ethernet switch. - -However on certain platforms (like the Qualcomm IPQ40xx -SoCs) the built-in ethernet switch is connected directly -to an ethernet MAC, and the tagging information must be -sent out-of-band which is done directly via the hardware -TX descriptors of the ethernet MAC. - -In such cases, putting the information into the skb causes -unneccesary overhead, because the ethernet driver must -remove that before sending the ethernet frame towards to -the hardware. - -This change adds two new DSA specific fields to struct -skb_shared_info which makes it possible to send the -tagging information via skb->shinfo. With this approach, -the twofold modifications of the skb data can be avoided. - -Signed-off-by: Gabor Juhos ---- - include/linux/skbuff.h | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/include/linux/skbuff.h -+++ b/include/linux/skbuff.h -@@ -564,6 +564,9 @@ struct skb_shared_info { - unsigned int gso_type; - u32 tskey; - -+ unsigned int dsa_tag_proto; -+ unsigned char dsa_tag_data[8]; -+ - /* - * Warning : all fields before dataref are cleared in __alloc_skb() - */ diff --git a/target/linux/ipq40xx/patches-6.1/701-net-dsa-tag_ipq4019-add-shinfo-based-tagging-driver-.patch b/target/linux/ipq40xx/patches-6.1/701-net-dsa-tag_ipq4019-add-shinfo-based-tagging-driver-.patch deleted file mode 100644 index 74079d68a1..0000000000 --- a/target/linux/ipq40xx/patches-6.1/701-net-dsa-tag_ipq4019-add-shinfo-based-tagging-driver-.patch +++ /dev/null @@ -1,187 +0,0 @@ -From 29a0c2fae991cab142575c92276c0afdeb260ebe Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Thu, 28 Oct 2021 21:44:52 +0200 -Subject: [PATCH] net: dsa: tag_ipq4019: add shinfo based tagging driver for - IPQ40xx - -This change adds a tagging protocol driver for the built-in -ethernet switch of the Qualcomm Atheros IPQ4019 SoCs. - -In comparison to the existing tagging protocols this hardware -requires a slightly different approach because the switch does -not use in-band tags. - -On the receive path, the source port information is embedded -into the RX descriptors of the ethernet MAC hardware. Similarly, -the destination port mask must be sent via the TX descriptors -of the ethernet MAC when a packet is sent towards the switch. - -In order to support this special requirements, this patch -adds a new tagging protocol driver. - -The driver extracts the source port information directly -from the 'receive return descriptor' of the ethernet MAC. -It is possible because that descriptor is part of the skb -received from the ethernet driver. - -Unfortunatley, it is not possible to put the destination -port information directly to the TX descriptors, because -those are handled internally by the driver of the ethernet -hardware. - -To overcome this limitation, this tagging driver uses the -DSA specific fields in skb->shinfo to send the destination -port information to the ethernet driver. - -A similar tagging driver is exist but that uses skb -extensions which causes unnecessary overhead. - -Signed-off-by: Gabor Juhos ---- - include/linux/dsa/ipq4019.h | 11 ++++++ - include/net/dsa.h | 2 + - net/dsa/Kconfig | 6 +++ - net/dsa/Makefile | 1 + - net/dsa/tag_ipq4019.c | 79 +++++++++++++++++++++++++++++++++++++ - 5 files changed, 99 insertions(+) - create mode 100644 include/linux/dsa/ipq4019.h - create mode 100644 net/dsa/tag_ipq4019.c - ---- /dev/null -+++ b/include/linux/dsa/ipq4019.h -@@ -0,0 +1,11 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#ifndef DSA_IPQ40XX_H -+#define DSA_IPQ40XX_H -+ -+struct ipq40xx_dsa_tag_data { -+ u8 from_cpu; -+ u8 dp; -+}; -+ -+#endif /* DSA_IPQ40XX_H */ ---- a/include/net/dsa.h -+++ b/include/net/dsa.h -@@ -51,6 +51,7 @@ struct phylink_link_state; - #define DSA_TAG_PROTO_SEVILLE_VALUE 21 - #define DSA_TAG_PROTO_BRCM_LEGACY_VALUE 22 - #define DSA_TAG_PROTO_SJA1110_VALUE 23 -+#define DSA_TAG_PROTO_IPQ4019_VALUE 24 - - enum dsa_tag_protocol { - DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE, -@@ -77,6 +78,7 @@ enum dsa_tag_protocol { - DSA_TAG_PROTO_OCELOT_8021Q = DSA_TAG_PROTO_OCELOT_8021Q_VALUE, - DSA_TAG_PROTO_SEVILLE = DSA_TAG_PROTO_SEVILLE_VALUE, - DSA_TAG_PROTO_SJA1110 = DSA_TAG_PROTO_SJA1110_VALUE, -+ DSA_TAG_PROTO_IPQ4019 = DSA_TAG_PROTO_IPQ4019_VALUE, - }; - - struct dsa_switch; ---- a/net/dsa/Kconfig -+++ b/net/dsa/Kconfig -@@ -57,6 +57,12 @@ config NET_DSA_TAG_HELLCREEK - Say Y or M if you want to enable support for tagging frames - for the Hirschmann Hellcreek TSN switches. - -+config NET_DSA_TAG_IPQ4019 -+ tristate "Tag driver for Qualcomm Atheros IPQ4019 SoC built-in switch" -+ help -+ Say Y or M if you want to enable support for tagging frames for -+ the built-in switch of the Qualcomm Atheros IPQ4019 SoC-s. -+ - config NET_DSA_TAG_GSWIP - tristate "Tag driver for Lantiq / Intel GSWIP switches" - help ---- a/net/dsa/Makefile -+++ b/net/dsa/Makefile -@@ -8,6 +8,7 @@ obj-$(CONFIG_NET_DSA_TAG_AR9331) += tag_ - obj-$(CONFIG_NET_DSA_TAG_BRCM_COMMON) += tag_brcm.o - obj-$(CONFIG_NET_DSA_TAG_DSA_COMMON) += tag_dsa.o - obj-$(CONFIG_NET_DSA_TAG_GSWIP) += tag_gswip.o -+obj-$(CONFIG_NET_DSA_TAG_IPQ4019) += tag_ipq4019.o - obj-$(CONFIG_NET_DSA_TAG_HELLCREEK) += tag_hellcreek.o - obj-$(CONFIG_NET_DSA_TAG_KSZ) += tag_ksz.o - obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o ---- /dev/null -+++ b/net/dsa/tag_ipq4019.c -@@ -0,0 +1,78 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+ -+/* Copyright (c) 2021, Gabor Juhos */ -+ -+#include -+#include -+ -+#include "dsa_priv.h" -+ -+/* Receive Return Descriptor */ -+struct edma_rrd { -+ u16 rrd0; -+ u16 rrd1; -+ u16 rrd2; -+ u16 rrd3; -+ u16 rrd4; -+ u16 rrd5; -+ u16 rrd6; -+ u16 rrd7; -+} __packed; -+ -+#define EDMA_RRD_SIZE sizeof(struct edma_rrd) -+ -+#define EDMA_RRD1_PORT_ID_MASK GENMASK(14, 12) -+ -+static struct sk_buff *ipq4019_sh_tag_xmit(struct sk_buff *skb, -+ struct net_device *dev) -+{ -+ struct dsa_port *dp = dsa_slave_to_port(dev); -+ struct ipq40xx_dsa_tag_data *tag_data; -+ -+ BUILD_BUG_ON(sizeof_field(struct skb_shared_info, dsa_tag_data) < -+ sizeof(struct ipq40xx_dsa_tag_data)); -+ -+ skb_shinfo(skb)->dsa_tag_proto = DSA_TAG_PROTO_IPQ4019; -+ tag_data = (struct ipq40xx_dsa_tag_data *)skb_shinfo(skb)->dsa_tag_data; -+ -+ tag_data->from_cpu = 1; -+ /* set the destination port information */ -+ tag_data->dp = BIT(dp->index); -+ -+ return skb; -+} -+ -+static struct sk_buff *ipq4019_sh_tag_rcv(struct sk_buff *skb, -+ struct net_device *dev) -+{ -+ struct edma_rrd *rrd; -+ int offset; -+ int port; -+ -+ offset = EDMA_RRD_SIZE + ETH_HLEN; -+ if (unlikely(skb_headroom(skb) < offset)) -+ return NULL; -+ -+ rrd = (struct edma_rrd *)(skb->data - offset); -+ port = FIELD_GET(EDMA_RRD1_PORT_ID_MASK, rrd->rrd1); -+ -+ skb->dev = dsa_master_find_slave(dev, 0, port); -+ if (!skb->dev) -+ return NULL; -+ -+ return skb; -+} -+ -+const struct dsa_device_ops ipq4019_sh_tag_dsa_ops = { -+ .name = "ipq4019-sh", -+ .proto = DSA_TAG_PROTO_IPQ4019, -+ .xmit = ipq4019_sh_tag_xmit, -+ .rcv = ipq4019_sh_tag_rcv, -+}; -+ -+MODULE_LICENSE("GPL v2"); -+MODULE_DESCRIPTION("DSA tag driver for the IPQ4019 SoC built-in ethernet switch"); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_IPQ4019); -+ -+module_dsa_tag_driver(ipq4019_sh_tag_dsa_ops); diff --git a/target/linux/ipq40xx/patches-6.1/702-net-ethernet-qualcomm-add-IPQESS-support.patch b/target/linux/ipq40xx/patches-6.1/702-net-ethernet-qualcomm-add-IPQESS-support.patch deleted file mode 100644 index 72e9345118..0000000000 --- a/target/linux/ipq40xx/patches-6.1/702-net-ethernet-qualcomm-add-IPQESS-support.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 4f488235f498db43f2412116dea6e02c7fb20216 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 1 Nov 2021 12:36:51 +0100 -Subject: [PATCH] net: ethernet: qualcomm: add IPQESS support - -Allow compiling the IPQESS driver that supports the -Qualcomm IPQ40xx SoC built-in ethernet controller. - -Signed-off-by: Robert Marko ---- - drivers/net/ethernet/qualcomm/Kconfig | 11 +++++++++++ - drivers/net/ethernet/qualcomm/Makefile | 1 + - 2 files changed, 12 insertions(+) - ---- a/drivers/net/ethernet/qualcomm/Kconfig -+++ b/drivers/net/ethernet/qualcomm/Kconfig -@@ -60,6 +60,17 @@ config QCOM_EMAC - low power, Receive-Side Scaling (RSS), and IEEE 1588-2008 - Precision Clock Synchronization Protocol. - -+config QCOM_IPQ4019_ESS_EDMA -+ tristate "Qualcomm Atheros IPQ4019 ESS EDMA support" -+ depends on OF -+ select PHYLINK -+ help -+ This driver supports the Qualcomm Atheros IPQ40xx built-in -+ ESS EDMA ethernet controller. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called ipqess. -+ - source "drivers/net/ethernet/qualcomm/rmnet/Kconfig" - - endif # NET_VENDOR_QUALCOMM ---- a/drivers/net/ethernet/qualcomm/Makefile -+++ b/drivers/net/ethernet/qualcomm/Makefile -@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o - qcauart-objs := qca_uart.o - - obj-y += emac/ -+obj-y += ipqess/ - - obj-$(CONFIG_RMNET) += rmnet/ diff --git a/target/linux/ipq40xx/patches-6.1/704-net-phy-define-PSGMII-PHY-interface-mode.patch b/target/linux/ipq40xx/patches-6.1/704-net-phy-define-PSGMII-PHY-interface-mode.patch deleted file mode 100644 index 7fbf38a7e3..0000000000 --- a/target/linux/ipq40xx/patches-6.1/704-net-phy-define-PSGMII-PHY-interface-mode.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 157ac9f52fd9b9a22cf12f7755a905fb34ef72f7 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Fri, 25 Dec 2020 08:02:47 +0100 -Subject: [PATCH] net: phy: define PSGMII PHY interface mode - -The PSGMII interface is similar to QSGMII. The main difference -is that the PSGMII interface combines five SGMII lines into a -single link while in QSGMII only four lines are combined. - -Similarly to the QSGMII, this interface mode might also needs -special handling within the MAC driver. - -Add definitions for the PHY layer to allow to express this type -of connection between the MAC and PHY. - -Signed-off-by: Gabor Juhos ---- - Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 + - drivers/net/phy/phylink.c | 2 ++ - include/linux/phy.h | 3 +++ - 3 files changed, 6 insertions(+) - ---- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml -+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml -@@ -64,6 +64,7 @@ properties: - - mii - - gmii - - sgmii -+ - psgmii - - qsgmii - - tbi - - rev-mii ---- a/drivers/net/phy/phylink.c -+++ b/drivers/net/phy/phylink.c -@@ -366,6 +366,7 @@ void phylink_get_linkmodes(unsigned long - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII: -+ case PHY_INTERFACE_MODE_PSGMII: - case PHY_INTERFACE_MODE_QSGMII: - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_GMII: -@@ -629,6 +630,7 @@ static int phylink_parse_mode(struct phy - - switch (pl->link_config.interface) { - case PHY_INTERFACE_MODE_SGMII: -+ case PHY_INTERFACE_MODE_PSGMII: - case PHY_INTERFACE_MODE_QSGMII: - phylink_set(pl->supported, 10baseT_Half); - phylink_set(pl->supported, 10baseT_Full); ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -139,6 +139,7 @@ typedef enum { - PHY_INTERFACE_MODE_XGMII, - PHY_INTERFACE_MODE_XLGMII, - PHY_INTERFACE_MODE_MOCA, -+ PHY_INTERFACE_MODE_PSGMII, - PHY_INTERFACE_MODE_QSGMII, - PHY_INTERFACE_MODE_TRGMII, - PHY_INTERFACE_MODE_100BASEX, -@@ -244,6 +245,8 @@ static inline const char *phy_modes(phy_ - return "xlgmii"; - case PHY_INTERFACE_MODE_MOCA: - return "moca"; -+ case PHY_INTERFACE_MODE_PSGMII: -+ return "psgmii"; - case PHY_INTERFACE_MODE_QSGMII: - return "qsgmii"; - case PHY_INTERFACE_MODE_TRGMII: diff --git a/target/linux/ipq40xx/patches-6.1/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch b/target/linux/ipq40xx/patches-6.1/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch deleted file mode 100644 index 13b169e576..0000000000 --- a/target/linux/ipq40xx/patches-6.1/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch +++ /dev/null @@ -1,57 +0,0 @@ -From b5f71652b85a85ea53162e9e2b760b84fd0d254f Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 1 Nov 2021 18:10:28 +0100 -Subject: [PATCH] net: dsa: add Qualcomm IPQ4019 built-in switch support - -Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in. - -It shares most of the stuff with its external counterpart, however it is -modified for the SoC. -Namely, it doesn't have second CPU port (Port 6), so it has 6 ports -instead of 7. -It also has no built-in PHY-s but rather requires external PSGMII based -companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry -out calibration before using them. -PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which -unfortunately requires some magic values as the datasheet doesnt document -the bits that are being set or the register at all. - -Since its built-in it is MMIO like other peripherals and doesn't have its -own MDIO bus but depends on the SoC provided one. - -CPU connection is at Port 0 and it uses some kind of a internal connection -and no traditional RGMII/SGMII. -It also doesn't use in-band tagging like other qca8k switches so a shinfo -based tagger is used. - -Signed-off-by: Robert Marko ---- - drivers/net/dsa/qca/Kconfig | 9 +++++++++ - drivers/net/dsa/qca/Makefile | 1 + - 2 files changed, 10 insertions(+) - ---- a/drivers/net/dsa/qca/Kconfig -+++ b/drivers/net/dsa/qca/Kconfig -@@ -23,3 +23,13 @@ config NET_DSA_QCA8K_LEDS_SUPPORT - help - This enabled support for LEDs present on the Qualcomm Atheros - QCA8K Ethernet switch chips. -+ -+config NET_DSA_QCA8K_IPQ4019 -+ tristate "Qualcomm Atheros IPQ4019 built-in Ethernet switch support" -+ depends on HAS_IOMEM && NET_DSA -+ select NET_DSA_TAG_IPQ4019 -+ select REGMAP -+ help -+ This enables support for the Qualcomm Atheros IPQ4019 SoC built-in -+ Ethernet switch. -+ ---- a/drivers/net/dsa/qca/Makefile -+++ b/drivers/net/dsa/qca/Makefile -@@ -1,5 +1,6 @@ - # SPDX-License-Identifier: GPL-2.0-only - obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o -+obj-$(CONFIG_NET_DSA_QCA8K_IPQ4019) += qca8k-ipq4019.o - obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o - qca8k-y += qca8k-common.o qca8k-8xxx.o - ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT diff --git a/target/linux/ipq40xx/patches-6.1/706-arm-dts-ipq4019-add-switch-node.patch b/target/linux/ipq40xx/patches-6.1/706-arm-dts-ipq4019-add-switch-node.patch index a231c7331b..b1a6a2bf34 100644 --- a/target/linux/ipq40xx/patches-6.1/706-arm-dts-ipq4019-add-switch-node.patch +++ b/target/linux/ipq40xx/patches-6.1/706-arm-dts-ipq4019-add-switch-node.patch @@ -1,4 +1,4 @@ -From ebb62523990a27b3a25e422fa575619f7f725a20 Mon Sep 17 00:00:00 2001 +From 8cbdb2526c3d7ba2e0c8c771773595f195135f54 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 1 Nov 2021 18:15:04 +0100 Subject: [PATCH] arm: dts: ipq4019: add switch node @@ -8,12 +8,12 @@ for it to work. Signed-off-by: Robert Marko --- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 78 +++++++++++++++++++++++++++++ - 1 file changed, 78 insertions(+) + arch/arm/boot/dts/qcom-ipq4019.dtsi | 76 +++++++++++++++++++++++++++++ + 1 file changed, 76 insertions(+) --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -590,6 +590,82 @@ +@@ -591,6 +591,82 @@ status = "disabled"; }; diff --git a/target/linux/ipq40xx/patches-6.1/707-dt-bindings-net-add-QCA807x-PHY.patch b/target/linux/ipq40xx/patches-6.1/707-dt-bindings-net-add-QCA807x-PHY.patch index dfb8d692ab..e026b7550d 100644 --- a/target/linux/ipq40xx/patches-6.1/707-dt-bindings-net-add-QCA807x-PHY.patch +++ b/target/linux/ipq40xx/patches-6.1/707-dt-bindings-net-add-QCA807x-PHY.patch @@ -1,4 +1,4 @@ -From c66863c1ba8995b61e6d727d78a241c734f5bb57 Mon Sep 17 00:00:00 2001 +From dfba344da3657ee4d91e7ebd1217e93423d03624 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Thu, 1 Oct 2020 15:05:35 +0200 Subject: [PATCH] dt-bindings: net: add QCA807x PHY diff --git a/target/linux/ipq40xx/patches-6.1/708-net-phy-Add-Qualcom-QCA807x-driver.patch b/target/linux/ipq40xx/patches-6.1/708-net-phy-Add-Qualcom-QCA807x-driver.patch index 6a92a103d6..dd2bb33c55 100644 --- a/target/linux/ipq40xx/patches-6.1/708-net-phy-Add-Qualcom-QCA807x-driver.patch +++ b/target/linux/ipq40xx/patches-6.1/708-net-phy-Add-Qualcom-QCA807x-driver.patch @@ -1,6 +1,6 @@ -From f825cdc8bfde7616a14e2163f16303a8973031d2 Mon Sep 17 00:00:00 2001 +From 95179775debad6b0bdab241d4a305135fc5e67dc Mon Sep 17 00:00:00 2001 From: Robert Marko -Date: Wed, 7 Oct 2020 17:38:48 +0200 +Date: Fri, 9 Sep 2022 23:44:42 +0200 Subject: [PATCH] net: phy: Add Qualcom QCA807x driver This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s. @@ -19,32 +19,33 @@ These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards. Signed-off-by: Robert Marko --- - drivers/net/phy/Kconfig | 6 ++++++ + drivers/net/phy/Kconfig | 7 +++++++ drivers/net/phy/Makefile | 1 + - 2 files changed, 7 insertions(+) + 2 files changed, 8 insertions(+) --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -347,6 +347,12 @@ config AT803X_PHY +@@ -362,6 +362,13 @@ config AT803X_PHY Currently supports the AR8030, AR8031, AR8033, AR8035 and internal QCA8337(Internal qca8k PHY) model +config QCA807X_PHY -+ tristate "Qualcomm QCA807X PHYs" ++ tristate "Qualcomm QCA807x PHYs" + depends on OF_MDIO + help -+ Currently supports the QCA8072 and QCA8075 models. ++ Currently supports the Qualcomm QCA8072, QCA8075 and the PSGMII ++ control PHY. + config QSEMI_PHY tristate "Quality Semiconductor PHYs" help --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -92,6 +92,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o +@@ -94,6 +94,7 @@ obj-$(CONFIG_MOTORCOMM_PHY) += motorcomm + obj-$(CONFIG_NATIONAL_PHY) += national.o obj-$(CONFIG_NXP_C45_TJA11XX_PHY) += nxp-c45-tja11xx.o obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o - obj-$(CONFIG_QSEMI_PHY) += qsemi.o +obj-$(CONFIG_QCA807X_PHY) += qca807x.o + obj-$(CONFIG_QSEMI_PHY) += qsemi.o obj-$(CONFIG_REALTEK_PHY) += realtek.o obj-$(CONFIG_RENESAS_PHY) += uPD60620.o - obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o diff --git a/target/linux/ipq40xx/patches-6.1/709-arm-dts-ipq4019-QCA807x-properties.patch b/target/linux/ipq40xx/patches-6.1/709-arm-dts-ipq4019-QCA807x-properties.patch index cc4b44b393..5d8a9bf053 100644 --- a/target/linux/ipq40xx/patches-6.1/709-arm-dts-ipq4019-QCA807x-properties.patch +++ b/target/linux/ipq40xx/patches-6.1/709-arm-dts-ipq4019-QCA807x-properties.patch @@ -1,4 +1,4 @@ -From e0fa88eaa3c176b71e563da68949ac2ab45aaa61 Mon Sep 17 00:00:00 2001 +From 03ebcd291974e4ca5d77026111f63309bc708326 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Fri, 2 Oct 2020 10:43:26 +0200 Subject: [PATCH] arm: dts: ipq4019: QCA807x properties @@ -7,8 +7,8 @@ This adds necessary DT properties for QCA807x PHY-s to IPQ4019 DTSI. Signed-off-by: Robert Marko --- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) + arch/arm/boot/dts/qcom-ipq4019.dtsi | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -20,7 +20,7 @@ Signed-off-by: Robert Marko / { #address-cells = <1>; -@@ -726,22 +727,38 @@ +@@ -724,22 +725,38 @@ ethphy0: ethernet-phy@0 { reg = <0>; diff --git a/target/linux/ipq40xx/patches-6.1/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq40xx/patches-6.1/850-soc-add-qualcomm-syscon.patch index 9b44a4c885..6afb27b178 100644 --- a/target/linux/ipq40xx/patches-6.1/850-soc-add-qualcomm-syscon.patch +++ b/target/linux/ipq40xx/patches-6.1/850-soc-add-qualcomm-syscon.patch @@ -1,20 +1,10 @@ From: Christian Lamparter Subject: SoC: add qualcomm syscon ---- a/drivers/soc/qcom/Makefile -+++ b/drivers/soc/qcom/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o - obj-$(CONFIG_QCOM_SMSM) += smsm.o - obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o - obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o -+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o - obj-$(CONFIG_QCOM_APR) += apr.o - obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o - obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig -@@ -192,6 +192,13 @@ config QCOM_SOCINFO - Say yes here to support the Qualcomm socinfo driver, providing - information about the SoC to user space. +@@ -248,4 +248,11 @@ config QCOM_ICC_BWMON + the fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high + memory throughput even with lower CPU frequencies. +config QCOM_TCSR + tristate "QCOM Top Control and Status Registers" @@ -23,9 +13,14 @@ Subject: SoC: add qualcomm syscon + Say y here to enable TCSR support. The TCSR provides control + functions for various peripherals. + - config QCOM_WCNSS_CTRL - tristate "Qualcomm WCNSS control driver" - depends on ARCH_QCOM || COMPILE_TEST + endmenu +--- a/drivers/soc/qcom/Makefile ++++ b/drivers/soc/qcom/Makefile +@@ -29,3 +29,4 @@ obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o + obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o + obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o + obj-$(CONFIG_QCOM_ICC_BWMON) += icc-bwmon.o ++obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o --- /dev/null +++ b/drivers/soc/qcom/qcom_tcsr.c @@ -0,0 +1,98 @@ diff --git a/target/linux/ipq40xx/patches-6.1/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch b/target/linux/ipq40xx/patches-6.1/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch index b5b89b26f1..f08ff04137 100644 --- a/target/linux/ipq40xx/patches-6.1/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch +++ b/target/linux/ipq40xx/patches-6.1/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch @@ -15,7 +15,7 @@ Signed-off-by: Robert Marko --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c -@@ -1361,7 +1361,8 @@ static int qcom_scm_probe(struct platfor +@@ -1459,7 +1459,8 @@ static int qcom_scm_probe(struct platfor static void qcom_scm_shutdown(struct platform_device *pdev) { /* Clean shutdown, disable download mode to allow normal restart */ diff --git a/target/linux/ipq40xx/patches-6.1/999-atm-mpoa-intel-dsl-phy-support.patch b/target/linux/ipq40xx/patches-6.1/999-atm-mpoa-intel-dsl-phy-support.patch index b774fc39d8..3d5b7afe8c 100644 --- a/target/linux/ipq40xx/patches-6.1/999-atm-mpoa-intel-dsl-phy-support.patch +++ b/target/linux/ipq40xx/patches-6.1/999-atm-mpoa-intel-dsl-phy-support.patch @@ -4,7 +4,7 @@ Subject: [PATCH] UGW_SW-29163: ATM oam support --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c -@@ -2952,6 +2952,22 @@ char *ppp_dev_name(struct ppp_channel *c +@@ -2953,6 +2953,22 @@ char *ppp_dev_name(struct ppp_channel *c return name; } @@ -27,7 +27,7 @@ Subject: [PATCH] UGW_SW-29163: ATM oam support /* * Disconnect a channel from the generic layer. -@@ -3598,6 +3614,7 @@ EXPORT_SYMBOL(ppp_unregister_channel); +@@ -3599,6 +3615,7 @@ EXPORT_SYMBOL(ppp_unregister_channel); EXPORT_SYMBOL(ppp_channel_index); EXPORT_SYMBOL(ppp_unit_number); EXPORT_SYMBOL(ppp_dev_name); @@ -37,7 +37,7 @@ Subject: [PATCH] UGW_SW-29163: ATM oam support EXPORT_SYMBOL(ppp_output_wakeup); --- a/include/linux/ppp_channel.h +++ b/include/linux/ppp_channel.h -@@ -74,6 +74,9 @@ extern int ppp_unit_number(struct ppp_ch +@@ -76,6 +76,9 @@ extern int ppp_unit_number(struct ppp_ch /* Get the device name associated with a channel, or NULL if none */ extern char *ppp_dev_name(struct ppp_channel *); @@ -64,7 +64,7 @@ Subject: [PATCH] UGW_SW-29163: ATM oam support depends on ATM && INET --- a/net/atm/br2684.c +++ b/net/atm/br2684.c -@@ -596,6 +596,11 @@ static int br2684_regvcc(struct atm_vcc +@@ -598,6 +598,11 @@ static int br2684_regvcc(struct atm_vcc atmvcc->push = br2684_push; atmvcc->pop = br2684_pop; atmvcc->release_cb = br2684_release_cb; -- 2.30.2