From 4b19fcc363e9d3886d45818ad72633d5f0cba88d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 10 May 2007 23:04:39 -0400 Subject: [PATCH] [PATCH] libertas: Purge non-mesh ioctls Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/README | 516 --------- drivers/net/wireless/libertas/ioctl.c | 1381 +------------------------ drivers/net/wireless/libertas/join.c | 135 --- drivers/net/wireless/libertas/join.h | 4 - drivers/net/wireless/libertas/wext.c | 274 ----- drivers/net/wireless/libertas/wext.h | 85 -- 6 files changed, 16 insertions(+), 2379 deletions(-) diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README index 688da4c784b1..378577200b56 100644 --- a/drivers/net/wireless/libertas/README +++ b/drivers/net/wireless/libertas/README @@ -40,64 +40,11 @@ NAME SYNOPSIS iwpriv [sub-command] ... - iwpriv ethX version - iwpriv ethX scantype [sub-command] - iwpriv ethX getSNR - iwpriv ethX getNF - iwpriv ethX getRSSI - iwpriv ethX setrxant - iwpriv ethX getrxant - iwpriv ethX settxant - iwpriv ethX gettxant - iwpriv ethX authalgs - iwpriv ethX pre-TBTT - iwpriv ethX 8021xauthalgs - iwpriv ethX encryptionmode iwpriv ethX setregioncode iwpriv ethX getregioncode - iwpriv ethX setbcnavg - iwpriv ethX getbcnavg - iwpriv ethX setdataavg - iwpriv ethX setlisteninter - iwpriv ethX getlisteninter - iwpriv ethX setmultipledtim - iwpriv ethX getmultipledtim - iwpriv ethX atimwindow - iwpriv ethX deauth - iwpriv ethX adhocstop - iwpriv ethX radioon - iwpriv ethX radiooff - iwpriv ethX reasso-on - iwpriv ethX reasso-off - iwpriv ethX scanmode [sub-command] - iwpriv ethX setwpaie - iwpriv ethX wlanidle-off - iwpriv ethX wlanidle-on - iwpriv ethX getcis - iwpriv ethX getlog - iwpriv ethX getadhocstatus - iwpriv ethX adhocgrate - -Version 4 Command: - iwpriv ethX inactvityto - iwpriv ethX sleeppd - iwpriv ethX enable11d - iwpriv ethX tpccfg - iwpriv ethX powercfg - iwpriv ethX setafc - iwpriv ethX getafc Version 5 Command: iwpriv ethX ledgpio - iwpriv ethX scanprobes - iwpriv ethX lolisteninter - iwpriv ethX rateadapt - iwpriv ethX txcontrol - iwpriv ethX psnullinterval - iwpriv ethX prescan - iwpriv ethX getrxinfo - iwpriv ethX gettxrate - iwpriv ethX beaconinterval BT Commands: The blinding table (BT) contains a list of mac addresses that should be @@ -150,114 +97,6 @@ DESCRIPTION The ethX parameter specifies the network device that is to be used to perform this command on. it could be eth0, eth1 etc. -version - This is used to get the current version of the driver and the firmware. - -scantype - This command is used to set the scan type to be used by the driver in - the scan command. This setting will not be used while performing a scan - for a specific SSID, as it is always done with scan type being active. - - where the sub-commands are: - - active -- to set the scan type to active - passive -- to set the scan type to passive - get -- to get the scan type set in the driver - -getSNR - This command gets the average and non average value of Signal to Noise - Ratio of Beacon and Data. - - where value is:- - 0 -- Beacon non-average. - 1 -- Beacon average. - 2 -- Data non-average. - 3 -- Data average. - - If no value is given, all four values are returned in the order mentioned - above. - - Note: This command is available only when STA is connected. - -getRSSI - This command gets the average and non average value os Receive Signal - Strength of Beacon and Data. - - where value is:- - 0 -- Beacon non-average. - 1 -- Beacon average. - 2 -- Data non-average. - 3 -- Data average. - - Note: This command is available only when STA is connected. - -getNF - This command gets the average and non average value of Noise Floor of - Beacon and Data. - - where value is:- - 0 -- Beacon non-average. - 1 -- Beacon average. - 2 -- Data non-average. - 3 -- Data average. - - Note: This command is available only when STA is connected. - -setrxant - This command is used to set the mode for Rx antenna. - - The options that can be sent are:- - 1 -- Antenna 1. - 2 -- Antenna 2. - 0xFFFF -- Diversity. - - Usage: - iwpriv ethX setrxant 0x01: select Antenna 1. - -getrxant - This command is used to get the mode for Rx antenna. - - -settxant - This command is used to set the mode for Tx antenna. - The options that can be sent are:- - 1 -- Antenna 1. - 2 -- Antenna 2. - 0xFFFF -- Diversity. - Usage: - iwpriv ethX settxant 0x01: select Antenna 1. - -gettxant - This command is used to get the mode for Tx antenna. - -authalgs - This command is used by the WPA supplicant to set the authentication - algorithms in the station. - -8021xauthalgs - This command is used by the WPA supplicant to set the 8021.x authentication algorithm type - station. - - where values can be:- - 1 -- None - 2 -- LEAP - 4 -- TLS - 8 -- TTLs - 16 -- MD5 - - -encryptionmode - This command is used by the WPA supplicant to set the encryption algorithm. - - where values can be:- - 0 -- NONE - 1 -- WEP40 - 2 -- TKIP - 3 -- CCMP - 4 -- WEP104 - -pre-TBTT - This command is used to set pre-TBTT time period where value is in microseconds. - setregioncode This command is used to set the region code in the station. where value is 'region code' for various regions like @@ -270,114 +109,6 @@ getregioncode This command is used to get the region code information set in the station. -setbcnavg - Set the weighting factor for calculating RSSI. - -getbcnavg - Get weighting factor for calculating RSSI. - -setdataavg - Set the weighting factor for calculating SNR. - -setlisteninter - This command is used to set the listen interval in the - station. - - where the value ranges between 1 - 255 - -getlisteninter - This command is used to get the listen interval value set in the - station. - -setmultipledtim - This command is used to set the multiple dtim value in the - station. - where the value is 1,2,3,4,5,0xfffe - 0xfffe means the firmware will use listen interval in association - command for waking up - -getmultipledtim - This command is used to get the multiple dtim value set in the station. - -atimwindow - This command is used to set the atim value in the - station. - - where the value ranges between 0 - 50 - -deauth - This command is used to send the de-authentication to the AP with which - the station is associated. This command is valid only when - station is in Infrastructure mode. - - Note: This command is available only when STA is connected. - -adhocstop - This command is used to stop beacon transmission from the station and - go into idle state in ad-hoc mode. - - Note: This command is available only when STA is connected. - -radioon - This command is used to turn on the RF antenna. - -radiooff - This command is sued to turn off the RF antenna. - -scanmode - This command is used to set the station to scan for either IBSS - networks or BSS networks or both BSS and IBSS networks. This - command can be used with sub commands, - - where the value for - bss -- Scan All the BSS networks. - ibss -- Scan All the IBSS networks. - any -- Scan both BSS and IBSS networks. - - - -setwpaie - This command is used by WPA supplicant to send the WPA-IE to the driver. - -wlanidle-off - This command is used to get into idle state. - - Note: This command is available only when STA is connected. - -wlanidle-on - This command is used to get off the idle state. - - Note: This command is available only when STA is connected. - - -getlog - This command is used to get the 802.11 statistics available in the - station. - - Note: This command is available only when STA is connected. - -getadhocstatus - This command is used to get the ad-hoc Network Status. - - The various status codes are: - AdhocStarted - AdhocJoined - AdhocIdle - InfraMode - AutoUnknownMode - - Note: This command is available only when STA is connected. - -adhocgrate - This command is used to enable(1) g_rate, Disable(0) g_rate - and request(2) the status which g_rate is disabled/enabled, - for Ad-hoc creator. - - where value is:- - 0 -- Disabled - 1 -- Enabled - 2 -- Get - ledgpio This command is used to set/get LEDs. @@ -400,253 +131,6 @@ ledgpio Note: LED0 is invalid Note: Maximum Number of LEDs are 16. -inactivityto - This command is used by the host to set/get the inactivity timeout value, - which specifies when WLAN device is put to sleep. - - Usage: - iwpriv ethX inactivityto [] - - where the parameter are: - timeout: timeout value in milliseconds. - - Example: - iwpriv eth1 inactivityto - "get the timeout value" - - iwpriv eth1 inactivityto X - "set timeout value to X ms" - - -sleeppd - This command is used to configure the sleep period of the WLAN device. - - Usage: - iwpriv ethX sleeppd [] - - where the parameter are: - Period: sleep period in milliseconds. Range 10~60. - - Example: - iwpriv eth1 sleeppd 10 - "set period as 10 ms" - iwpriv eth1 sleeppd - "get the sleep period configuration" - -enable11d - This command is used to control 11d - where value is:- - 1 -- Enabled - 0 -- Disabled - 2 -- Get - - - - -tpccfg - Enables or disables automatic transmit power control. - - The first parameter turns this feature on (1) or off (0). When turning - on, the user must also supply four more parameters in the following - order: - -UseSNR (Use SNR (in addition to PER) for TPC algorithm), - -P0 (P0 power level for TPC), - -P1 (P1 power level for TPC), - -P2 (P2 power level for TPC). - - Usage: - iwpriv ethX tpccfg: Get current configuration - iwpriv ethX tpccfg 0: disable auto TPC - iwpriv ethX tpccfg 0x01 0x00 0x05 0x0a 0x0d: enable auto TPC; do not use SNR; - P0=0x05; P1=0x0a; P2=0x0d; - iwpriv ethX tpccfg 0x01 0x01 0x05 0x0a 0x0d: enable auto TPC; use SNR; - P0=0x05; P1=0x0a; P2=0x0d. - -powercfg - Enables or disables power adaptation. - - The first parameter turns this feature on (1) or off (0). When turning - on, the user must also supply three more parameters in the following - order: - -P0 (P0 power level for Power Adaptation), - -P1 (P1 power level for Power Adaptation), - -P2 (P2 power level for Power Adaptation). - - Usage: - iwpriv ethX powercfg: Get current configuration - iwpriv ethX powercfg 0: disable power adaptation - iwpriv ethX powercfg 1 0x0d 0x0f 0x12: enable power adaptation; - P0=0x0d; P1=0x0f; P2=0x12. - -getafc - This command returns automatic frequency control parameters. It returns - three integers: - -P0: automatic is on (1), or off (0), - -P1: current timing offset in PPM (part per million), and - -P2: current frequency offset in PPM. - -setafc - Set automatic frequency control options. - - The first parameter turns automatic on (1) or off (0). - The user must supply two more parameters in either case, in the following - order: - - When auto is on: - - -P0 (automatic adjustment frequency threshold in PPM), - -P1 (automatic adjustment period in beacon period), - - When auto is off: - - -P0 (manual adjustment timing offset in PPM), and - -P1 (manual adjustment frequency offset in PPM). - - Usage: - iwpriv ethX setafc 0 10 10: manual adjustment, both timing and frequcncy - offset are 10 PPM. - - iwpriv ethX setafc 1 10 10 enable afc, automatic adjustment, - frequency threshold 10 PPM, for every 10 beacon periods. - - - -scanprobes - This command sets number of probe requests per channel. - - Usage: - iwpriv ethX scanprobes 3 (set scan probes to 3) - iwpriv ethX scanprobes (get scan probes) - -lolisteninter - This command sets the value of listen interval. - - Usage: - iwpriv ethX lolisteninter 234 (set the lolisteninter to 234) - iwpriv ethX lolisteninter (get the lolisteninter value) - -rateadapt - This command sets the data rates bitmap. - Where - 0: Disable auto rate adapt - 1: Enable auto rate adapt - - - data rate bitmap - Bit Data rate - 0 1 Mbps - 1 2 Mbps - 2 5.5 Mbps - 3 11 Mbps - 4 Reserved - 5 6 Mbps - 6 9 Mbps - 7 12 Mbps - 8 18 Mbps - 9 24 Mbps - 10 36 Mbps - 11 48 Mbps - 12 54 Mbps - 12-15 Reserved - - Usage: - iwpriv ethX rateadapt - read the currect data rate setting - iwpriv ethX rateadapt 1 0x07 - enable auto data rate adapt and - data rates are 1Mbps, 2Mbsp and 5.5Mbps - - -txcontrol - This command is used to set the Tx rate, ack policy, and retry limit on a per packet basis. - - Where value is: - if bit[4] == 1: - bit[3:0] -- 0 1 2 3 4 5 6 7 8 9 10 11 12 13-16 - Data Rate(Mbps) -- 1 2 5.5 11 Rsv 6 9 12 18 24 36 48 54 Rsv - - bit[12:8] - if bit[12] == 1, bit[11:8] specifies the Tx retry limit. - - bit[14:13] specifies per packet ack policy: - bit[14:13] - 1 0 use immediate ack policy for this packet - 1 1 use no ack policy for this packet - 0 x use the per-packet ack policy setting - - Usage: - iwpriv ethX txcontrol 0x7513 - Use no-ack policy, 5 retires for Tx, 11Mbps rate - - - -psnullinterval - This command is used to set/request NULL package interval for Power Save - under infrastructure mode. - - where value is:- - -1 -- Disabled - n>0 -- Set interval as n (seconds) - -prescan - This command is used to enable (1)/disable(0) auto prescan before assoicate to the ap - - where value is:- - 0 -- Disabled - 1 -- Enabled - 2 -- Get - -getrxinfo - This command gets non average value of Signal to Noise Ratio of Data and rate index. - - The following table shows RateIndex and Rate - - RateIndex Data rate - 0 1 Mbps - 1 2 Mbps - 2 5.5 Mbps - 3 11 Mbps - 4 Reserved - 5 6 Mbps - 6 9 Mbps - 7 12 Mbps - 8 18 Mbps - 9 24 Mbps - 10 36 Mbps - 11 48 Mbps - 12 54 Mbps - 13-15 Reserved - -gettxrate - This command gets current Tx rate index of the first packet associated with Rate Adaptation. - - The following table shows RateIndex and Rate - - RateIndex Data rate - 0 1 Mbps - 1 2 Mbps - 2 5.5 Mbps - 3 11 Mbps - 4 Reserved - 5 6 Mbps - 6 9 Mbps - 7 12 Mbps - 8 18 Mbps - 9 24 Mbps - 10 36 Mbps - 11 48 Mbps - 12 54 Mbps - 13-15 Reserved - -bcninterval - This command is used to sets beacon interval in adhoc mode when an argument is given, and gets current adhoc - beacon interval when no argument is given. The valid beacon interval is between 20 - 1000, - default beacon interval is 100. - - Usage: - iwpriv ethX bcninterval 100 (set adhoc beacon interval to 100) - iwpriv ethX bcninterval (get adhoc beacon interval) - fwt_add This command is used to insert an entry into the FWT table. The list of parameters must follow the following structure: diff --git a/drivers/net/wireless/libertas/ioctl.c b/drivers/net/wireless/libertas/ioctl.c index 636a0897150e..42dfd45890c2 100644 --- a/drivers/net/wireless/libertas/ioctl.c +++ b/drivers/net/wireless/libertas/ioctl.c @@ -27,966 +27,31 @@ #define WAIT_FOR_SCAN_RRESULT_MAX_TIME (10 * HZ) -static int setrxantenna(wlan_private * priv, int mode) -{ - int ret = 0; - wlan_adapter *adapter = priv->adapter; - - if (mode != RF_ANTENNA_1 && mode != RF_ANTENNA_2 - && mode != RF_ANTENNA_AUTO) { - return -EINVAL; - } - - adapter->rxantennamode = mode; - - lbs_pr_debug(1, "SET RX Antenna mode to 0x%04x\n", adapter->rxantennamode); - - ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna, - cmd_act_set_rx, - cmd_option_waitforrsp, 0, - &adapter->rxantennamode); - return ret; -} - -static int settxantenna(wlan_private * priv, int mode) -{ - int ret = 0; - wlan_adapter *adapter = priv->adapter; - - if ((mode != RF_ANTENNA_1) && (mode != RF_ANTENNA_2) - && (mode != RF_ANTENNA_AUTO)) { - return -EINVAL; - } - - adapter->txantennamode = mode; - - lbs_pr_debug(1, "SET TX Antenna mode to 0x%04x\n", adapter->txantennamode); - - ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna, - cmd_act_set_tx, - cmd_option_waitforrsp, 0, - &adapter->txantennamode); - - return ret; -} - -static int getrxantenna(wlan_private * priv, char *buf) -{ - int ret = 0; - wlan_adapter *adapter = priv->adapter; - - // clear it, so we will know if the value - // returned below is correct or not. - adapter->rxantennamode = 0; - - ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna, - cmd_act_get_rx, - cmd_option_waitforrsp, 0, NULL); - - if (ret) { - LEAVE(); - return ret; - } - - lbs_pr_debug(1, "Get Rx Antenna mode:0x%04x\n", adapter->rxantennamode); - - return sprintf(buf, "0x%04x", adapter->rxantennamode) + 1; -} - -static int gettxantenna(wlan_private * priv, char *buf) -{ - int ret = 0; - wlan_adapter *adapter = priv->adapter; - - // clear it, so we will know if the value - // returned below is correct or not. - adapter->txantennamode = 0; - - ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna, - cmd_act_get_tx, - cmd_option_waitforrsp, 0, NULL); - - if (ret) { - LEAVE(); - return ret; - } - - lbs_pr_debug(1, "Get Tx Antenna mode:0x%04x\n", adapter->txantennamode); - - return sprintf(buf, "0x%04x", adapter->txantennamode) + 1; -} - -static int wlan_set_region(wlan_private * priv, u16 region_code) -{ - int i; - - for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) { - // use the region code to search for the index - if (region_code == libertas_region_code_to_index[i]) { - priv->adapter->regiontableindex = (u16) i; - priv->adapter->regioncode = region_code; - break; - } - } - - // if it's unidentified region code - if (i >= MRVDRV_MAX_REGION_CODE) { - lbs_pr_debug(1, "region Code not identified\n"); - LEAVE(); - return -1; - } - - if (libertas_set_regiontable(priv, priv->adapter->regioncode, 0)) { - LEAVE(); - return -EINVAL; - } - - return 0; -} - -/** - * @brief Get/Set Firmware wakeup method - * - * @param priv A pointer to wlan_private structure - * @param wrq A pointer to user data - * @return 0--success, otherwise fail - */ -static int wlan_txcontrol(wlan_private * priv, struct iwreq *wrq) -{ - wlan_adapter *adapter = priv->adapter; - int data; - ENTER(); - - if ((int)wrq->u.data.length == 0) { - if (copy_to_user - (wrq->u.data.pointer, &adapter->pkttxctrl, sizeof(u32))) { - lbs_pr_alert("copy_to_user failed!\n"); - return -EFAULT; - } - } else { - if ((int)wrq->u.data.length > 1) { - lbs_pr_alert("ioctl too many args!\n"); - return -EFAULT; - } - if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) { - lbs_pr_alert("Copy from user failed\n"); - return -EFAULT; - } - - adapter->pkttxctrl = (u32) data; - } - - wrq->u.data.length = 1; - - LEAVE(); - return 0; -} - -/** - * @brief Get/Set NULL Package generation interval - * - * @param priv A pointer to wlan_private structure - * @param wrq A pointer to user data - * @return 0--success, otherwise fail - */ -static int wlan_null_pkt_interval(wlan_private * priv, struct iwreq *wrq) -{ - wlan_adapter *adapter = priv->adapter; - int data; - ENTER(); - - if ((int)wrq->u.data.length == 0) { - data = adapter->nullpktinterval; - - if (copy_to_user(wrq->u.data.pointer, &data, sizeof(int))) { - lbs_pr_alert( "copy_to_user failed!\n"); - return -EFAULT; - } - } else { - if ((int)wrq->u.data.length > 1) { - lbs_pr_alert( "ioctl too many args!\n"); - return -EFAULT; - } - if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) { - lbs_pr_debug(1, "Copy from user failed\n"); - return -EFAULT; - } - - adapter->nullpktinterval = data; - } - - wrq->u.data.length = 1; - - LEAVE(); - return 0; -} - -static int wlan_get_rxinfo(wlan_private * priv, struct iwreq *wrq) -{ - wlan_adapter *adapter = priv->adapter; - int data[2]; - ENTER(); - data[0] = adapter->SNR[TYPE_RXPD][TYPE_NOAVG]; - data[1] = adapter->rxpd_rate; - if (copy_to_user(wrq->u.data.pointer, data, sizeof(int) * 2)) { - lbs_pr_debug(1, "Copy to user failed\n"); - return -EFAULT; - } - wrq->u.data.length = 2; - LEAVE(); - return 0; -} - -static int wlan_get_snr(wlan_private * priv, struct iwreq *wrq) -{ - int ret = 0; - wlan_adapter *adapter = priv->adapter; - int data[4]; - - ENTER(); - memset(data, 0, sizeof(data)); - if (wrq->u.data.length) { - if (copy_from_user(data, wrq->u.data.pointer, - min_t(size_t, wrq->u.data.length, 4) * sizeof(int))) - return -EFAULT; - } - if ((wrq->u.data.length == 0) || (data[0] == 0) || (data[0] == 1)) { - if (adapter->connect_status == libertas_connected) { - ret = libertas_prepare_and_send_command(priv, - cmd_802_11_rssi, - 0, - cmd_option_waitforrsp, - 0, NULL); - - if (ret) { - LEAVE(); - return ret; - } - } - } - - if (wrq->u.data.length == 0) { - data[0] = adapter->SNR[TYPE_BEACON][TYPE_NOAVG]; - data[1] = adapter->SNR[TYPE_BEACON][TYPE_AVG]; - data[2] = adapter->SNR[TYPE_RXPD][TYPE_NOAVG]; - data[3] = adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE; - if (copy_to_user(wrq->u.data.pointer, data, sizeof(int) * 4)) - return -EFAULT; - wrq->u.data.length = 4; - } else if (data[0] == 0) { - data[0] = adapter->SNR[TYPE_BEACON][TYPE_NOAVG]; - if (copy_to_user(wrq->u.data.pointer, data, sizeof(int))) - return -EFAULT; - wrq->u.data.length = 1; - } else if (data[0] == 1) { - data[0] = adapter->SNR[TYPE_BEACON][TYPE_AVG]; - if (copy_to_user(wrq->u.data.pointer, data, sizeof(int))) - return -EFAULT; - wrq->u.data.length = 1; - } else if (data[0] == 2) { - data[0] = adapter->SNR[TYPE_RXPD][TYPE_NOAVG]; - if (copy_to_user(wrq->u.data.pointer, data, sizeof(int))) - return -EFAULT; - wrq->u.data.length = 1; - } else if (data[0] == 3) { - data[0] = adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE; - if (copy_to_user(wrq->u.data.pointer, data, sizeof(int))) - return -EFAULT; - wrq->u.data.length = 1; - } else - return -ENOTSUPP; - - LEAVE(); - return 0; -} - -static int wlan_beacon_interval(wlan_private * priv, struct iwreq *wrq) -{ - int data; - wlan_adapter *adapter = priv->adapter; - - if (wrq->u.data.length > 0) { - if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) - return -EFAULT; - - lbs_pr_debug(1, "WLAN SET BEACON INTERVAL: %d\n", data); - if ((data > MRVDRV_MAX_BEACON_INTERVAL) - || (data < MRVDRV_MIN_BEACON_INTERVAL)) - return -ENOTSUPP; - adapter->beaconperiod = data; - } - data = adapter->beaconperiod; - if (copy_to_user(wrq->u.data.pointer, &data, sizeof(int))) - return -EFAULT; - - wrq->u.data.length = 1; - - return 0; -} - -static int wlan_get_rssi(wlan_private * priv, struct iwreq *wrq) -{ - int ret = 0; - wlan_adapter *adapter = priv->adapter; - int temp; - int data = 0; - int *val; - - ENTER(); - data = SUBCMD_DATA(wrq); - if ((data == 0) || (data == 1)) { - ret = libertas_prepare_and_send_command(priv, - cmd_802_11_rssi, - 0, cmd_option_waitforrsp, - 0, NULL); - if (ret) { - LEAVE(); - return ret; - } - } - - switch (data) { - case 0: - - temp = CAL_RSSI(adapter->SNR[TYPE_BEACON][TYPE_NOAVG], - adapter->NF[TYPE_BEACON][TYPE_NOAVG]); - break; - case 1: - temp = CAL_RSSI(adapter->SNR[TYPE_BEACON][TYPE_AVG], - adapter->NF[TYPE_BEACON][TYPE_AVG]); - break; - case 2: - temp = CAL_RSSI(adapter->SNR[TYPE_RXPD][TYPE_NOAVG], - adapter->NF[TYPE_RXPD][TYPE_NOAVG]); - break; - case 3: - temp = CAL_RSSI(adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE, - adapter->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE); - break; - default: - return -ENOTSUPP; - } - val = (int *)wrq->u.name; - *val = temp; - - LEAVE(); - return 0; -} - -static int wlan_get_nf(wlan_private * priv, struct iwreq *wrq) -{ - int ret = 0; - wlan_adapter *adapter = priv->adapter; - int temp; - int data = 0; - int *val; - - data = SUBCMD_DATA(wrq); - if ((data == 0) || (data == 1)) { - ret = libertas_prepare_and_send_command(priv, - cmd_802_11_rssi, - 0, cmd_option_waitforrsp, - 0, NULL); - - if (ret) { - LEAVE(); - return ret; - } - } - - switch (data) { - case 0: - temp = adapter->NF[TYPE_BEACON][TYPE_NOAVG]; - break; - case 1: - temp = adapter->NF[TYPE_BEACON][TYPE_AVG]; - break; - case 2: - temp = adapter->NF[TYPE_RXPD][TYPE_NOAVG]; - break; - case 3: - temp = adapter->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE; - break; - default: - return -ENOTSUPP; - } - - temp = CAL_NF(temp); - - lbs_pr_debug(1, "%s: temp = %d\n", __FUNCTION__, temp); - val = (int *)wrq->u.name; - *val = temp; - return 0; -} - -static int wlan_get_txrate_ioctl(wlan_private * priv, struct ifreq *req) -{ - wlan_adapter *adapter = priv->adapter; - int *pdata; - struct iwreq *wrq = (struct iwreq *)req; - int ret = 0; - adapter->txrate = 0; - lbs_pr_debug(1, "wlan_get_txrate_ioctl\n"); - ret = libertas_prepare_and_send_command(priv, cmd_802_11_tx_rate_query, - cmd_act_get, cmd_option_waitforrsp, - 0, NULL); - if (ret) - return ret; - - pdata = (int *)wrq->u.name; - *pdata = (int)adapter->txrate; - return 0; -} - -static int wlan_get_adhoc_status_ioctl(wlan_private * priv, struct iwreq *wrq) -{ - char status[64]; - wlan_adapter *adapter = priv->adapter; - - memset(status, 0, sizeof(status)); - - switch (adapter->mode) { - case IW_MODE_ADHOC: - if (adapter->connect_status == libertas_connected) { - if (adapter->adhoccreate) - memcpy(&status, "AdhocStarted", sizeof(status)); - else - memcpy(&status, "AdhocJoined", sizeof(status)); - } else { - memcpy(&status, "AdhocIdle", sizeof(status)); - } - break; - case IW_MODE_INFRA: - memcpy(&status, "Inframode", sizeof(status)); - break; - default: - memcpy(&status, "AutoUnknownmode", sizeof(status)); - break; - } - - lbs_pr_debug(1, "status = %s\n", status); - wrq->u.data.length = strlen(status) + 1; - - if (wrq->u.data.pointer) { - if (copy_to_user(wrq->u.data.pointer, - &status, wrq->u.data.length)) - return -EFAULT; - } - - LEAVE(); - return 0; -} - -/** - * @brief Set Auto prescan - * @param priv A pointer to wlan_private structure - * @param wrq A pointer to iwreq structure - * @return 0 --success, otherwise fail - */ -static int wlan_subcmd_setprescan_ioctl(wlan_private * priv, struct iwreq *wrq) -{ - int data; - wlan_adapter *adapter = priv->adapter; - int *val; - - data = SUBCMD_DATA(wrq); - lbs_pr_debug(1, "WLAN_SUBCMD_SET_PRESCAN %d\n", data); - adapter->prescan = data; - - val = (int *)wrq->u.name; - *val = data; - return 0; -} - -static int wlan_set_multiple_dtim_ioctl(wlan_private * priv, struct ifreq *req) -{ - struct iwreq *wrq = (struct iwreq *)req; - u32 mdtim; - int idata; - int ret = -EINVAL; - - ENTER(); - - idata = SUBCMD_DATA(wrq); - mdtim = (u32) idata; - if (((mdtim >= MRVDRV_MIN_MULTIPLE_DTIM) - && (mdtim <= MRVDRV_MAX_MULTIPLE_DTIM)) - || (mdtim == MRVDRV_IGNORE_MULTIPLE_DTIM)) { - priv->adapter->multipledtim = mdtim; - ret = 0; - } - if (ret) - lbs_pr_debug(1, "Invalid parameter, multipledtim not changed.\n"); - - LEAVE(); - return ret; -} - -static void adjust_mtu(wlan_private * priv) -{ - int mtu_increment = 0; - - if (priv->adapter->linkmode == WLAN_LINKMODE_802_11) - mtu_increment += sizeof(struct ieee80211_hdr_4addr); - - if (priv->adapter->radiomode == WLAN_RADIOMODE_RADIOTAP) - mtu_increment += max(sizeof(struct tx_radiotap_hdr), - sizeof(struct rx_radiotap_hdr)); - priv->wlan_dev.netdev->mtu = ETH_FRAME_LEN - - sizeof(struct ethhdr) - + mtu_increment; -} - -/** - * @brief Set Link-Layer Layer mode - * @param priv A pointer to wlan_private structure - * @param req A pointer to ifreq structure - * @return 0 --success, otherwise fail - */ -static int wlan_set_linkmode_ioctl(wlan_private * priv, struct ifreq *req) -{ - int mode; - - mode = (int)((struct ifreq *)((u8 *) req + 4))->ifr_data; - - switch (mode) { - case WLAN_LINKMODE_802_3: - priv->adapter->linkmode = mode; - break; - case WLAN_LINKMODE_802_11: - priv->adapter->linkmode = mode; - break; - default: - lbs_pr_info("usb8388-5: invalid link-layer mode (%#x)\n", - mode); - return -EINVAL; - break; - } - lbs_pr_debug(1, "usb8388-5: link-layer mode is %#x\n", mode); - - adjust_mtu(priv); - - return 0; -} - -/** - * @brief Set Radio header mode - * @param priv A pointer to wlan_private structure - * @param req A pointer to ifreq structure - * @return 0 --success, otherwise fail - */ -static int wlan_set_radiomode_ioctl(wlan_private * priv, struct ifreq *req) -{ - int mode; - - mode = (int)((struct ifreq *)((u8 *) req + 4))->ifr_data; - - switch (mode) { - case WLAN_RADIOMODE_NONE: - priv->adapter->radiomode = mode; - break; - case WLAN_RADIOMODE_RADIOTAP: - priv->adapter->radiomode = mode; - break; - default: - lbs_pr_debug(1, "usb8388-5: invalid radio header mode (%#x)\n", - mode); - return -EINVAL; - } - lbs_pr_debug(1, "usb8388-5: radio-header mode is %#x\n", mode); - - adjust_mtu(priv); - return 0; -} - -/** - * @brief Set Debug header mode - * @param priv A pointer to wlan_private structure - * @param req A pointer to ifreq structure - * @return 0 --success, otherwise fail - */ -static int wlan_set_debugmode_ioctl(wlan_private * priv, struct ifreq *req) -{ - priv->adapter->debugmode = (int)((struct ifreq *) - ((u8 *) req + 4))->ifr_data; - return 0; -} - -static int wlan_subcmd_getrxantenna_ioctl(wlan_private * priv, - struct ifreq *req) -{ - int len; - char buf[8]; - struct iwreq *wrq = (struct iwreq *)req; - - lbs_pr_debug(1, "WLAN_SUBCMD_GETRXANTENNA\n"); - len = getrxantenna(priv, buf); - - wrq->u.data.length = len; - if (wrq->u.data.pointer) { - if (copy_to_user(wrq->u.data.pointer, &buf, len)) { - lbs_pr_debug(1, "CopyToUser failed\n"); - return -EFAULT; - } - } - - return 0; -} - -static int wlan_subcmd_gettxantenna_ioctl(wlan_private * priv, - struct ifreq *req) -{ - int len; - char buf[8]; - struct iwreq *wrq = (struct iwreq *)req; - - lbs_pr_debug(1, "WLAN_SUBCMD_GETTXANTENNA\n"); - len = gettxantenna(priv, buf); - - wrq->u.data.length = len; - if (wrq->u.data.pointer) { - if (copy_to_user(wrq->u.data.pointer, &buf, len)) { - lbs_pr_debug(1, "CopyToUser failed\n"); - return -EFAULT; - } - } - return 0; -} - -/** - * @brief Get the MAC TSF value from the firmware - * - * @param priv A pointer to wlan_private structure - * @param wrq A pointer to iwreq structure containing buffer - * space to store a TSF value retrieved from the firmware - * - * @return 0 if successful; IOCTL error code otherwise - */ -static int wlan_get_tsf_ioctl(wlan_private * priv, struct iwreq *wrq) -{ - u64 tsfval; - int ret; - - ret = libertas_prepare_and_send_command(priv, - cmd_get_tsf, - 0, cmd_option_waitforrsp, 0, &tsfval); - - lbs_pr_debug(1, "IOCTL: Get TSF = 0x%016llx\n", tsfval); - - if (ret != 0) { - lbs_pr_debug(1, "IOCTL: Get TSF; command exec failed\n"); - ret = -EFAULT; - } else { - if (copy_to_user(wrq->u.data.pointer, - &tsfval, - min_t(size_t, wrq->u.data.length, - sizeof(tsfval))) != 0) { - - lbs_pr_debug(1, "IOCTL: Get TSF; Copy to user failed\n"); - ret = -EFAULT; - } else { - ret = 0; - } - } - return ret; -} - -/** - * @brief Get/Set adapt rate - * @param priv A pointer to wlan_private structure - * @param wrq A pointer to iwreq structure - * @return 0 --success, otherwise fail - */ -static int wlan_adapt_rateset(wlan_private * priv, struct iwreq *wrq) -{ - int ret; - wlan_adapter *adapter = priv->adapter; - int data[2]; - - memset(data, 0, sizeof(data)); - if (!wrq->u.data.length) { - lbs_pr_debug(1, "Get ADAPT RATE SET\n"); - ret = libertas_prepare_and_send_command(priv, - cmd_802_11_rate_adapt_rateset, - cmd_act_get, - cmd_option_waitforrsp, 0, NULL); - data[0] = adapter->enablehwauto; - data[1] = adapter->ratebitmap; - if (copy_to_user(wrq->u.data.pointer, data, sizeof(int) * 2)) { - lbs_pr_debug(1, "Copy to user failed\n"); - return -EFAULT; - } -#define GET_TWO_INT 2 - wrq->u.data.length = GET_TWO_INT; - } else { - lbs_pr_debug(1, "Set ADAPT RATE SET\n"); - if (wrq->u.data.length > 2) - return -EINVAL; - if (copy_from_user - (data, wrq->u.data.pointer, - sizeof(int) * wrq->u.data.length)) { - lbs_pr_debug(1, "Copy from user failed\n"); - return -EFAULT; - } - - adapter->enablehwauto = data[0]; - adapter->ratebitmap = data[1]; - ret = libertas_prepare_and_send_command(priv, - cmd_802_11_rate_adapt_rateset, - cmd_act_set, - cmd_option_waitforrsp, 0, NULL); - } - return ret; -} - -/** - * @brief Get/Set inactivity timeout - * @param priv A pointer to wlan_private structure - * @param wrq A pointer to iwreq structure - * @return 0 --success, otherwise fail - */ -static int wlan_inactivity_timeout(wlan_private * priv, struct iwreq *wrq) -{ - int ret; - int data = 0; - u16 timeout = 0; - - ENTER(); - if (wrq->u.data.length > 1) - return -ENOTSUPP; - - if (wrq->u.data.length == 0) { - /* Get */ - ret = libertas_prepare_and_send_command(priv, - cmd_802_11_inactivity_timeout, - cmd_act_get, - cmd_option_waitforrsp, 0, - &timeout); - data = timeout; - if (copy_to_user(wrq->u.data.pointer, &data, sizeof(int))) { - lbs_pr_debug(1, "Copy to user failed\n"); - return -EFAULT; - } - } else { - /* Set */ - if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) { - lbs_pr_debug(1, "Copy from user failed\n"); - return -EFAULT; - } - - timeout = data; - ret = libertas_prepare_and_send_command(priv, - cmd_802_11_inactivity_timeout, - cmd_act_set, - cmd_option_waitforrsp, 0, - &timeout); - } - - wrq->u.data.length = 1; - - LEAVE(); - return ret; -} - -static int wlan_do_getlog_ioctl(wlan_private * priv, struct iwreq *wrq) -{ - int ret; - char buf[GETLOG_BUFSIZE - 1]; - wlan_adapter *adapter = priv->adapter; - - lbs_pr_debug(1, " GET STATS\n"); - - ret = libertas_prepare_and_send_command(priv, cmd_802_11_get_log, - 0, cmd_option_waitforrsp, 0, NULL); - - if (ret) { - return ret; - } - - if (wrq->u.data.pointer) { - sprintf(buf, "\n mcasttxframe %u failed %u retry %u " - "multiretry %u framedup %u " - "rtssuccess %u rtsfailure %u ackfailure %u\n" - "rxfrag %u mcastrxframe %u fcserror %u " - "txframe %u wepundecryptable %u ", - adapter->logmsg.mcasttxframe, - adapter->logmsg.failed, - adapter->logmsg.retry, - adapter->logmsg.multiretry, - adapter->logmsg.framedup, - adapter->logmsg.rtssuccess, - adapter->logmsg.rtsfailure, - adapter->logmsg.ackfailure, - adapter->logmsg.rxfrag, - adapter->logmsg.mcastrxframe, - adapter->logmsg.fcserror, - adapter->logmsg.txframe, - adapter->logmsg.wepundecryptable); - wrq->u.data.length = strlen(buf) + 1; - if (copy_to_user(wrq->u.data.pointer, buf, wrq->u.data.length)) { - lbs_pr_debug(1, "Copy to user failed\n"); - return -EFAULT; - } - } - - return 0; -} - -static int wlan_scan_type_ioctl(wlan_private * priv, struct iwreq *wrq) -{ - u8 buf[12]; - u8 *option[] = { "active", "passive", "get", }; - int i, max_options = (sizeof(option) / sizeof(option[0])); - int ret = 0; - wlan_adapter *adapter = priv->adapter; - - if (priv->adapter->enable11d) { - lbs_pr_debug(1, "11D: Cannot set scantype when 11D enabled\n"); - return -EFAULT; - } - - memset(buf, 0, sizeof(buf)); - - if (copy_from_user(buf, wrq->u.data.pointer, min_t(size_t, sizeof(buf), - wrq->u.data.length))) - return -EFAULT; - - lbs_pr_debug(1, "Scan type Option = %s\n", buf); - - buf[sizeof(buf) - 1] = '\0'; - - for (i = 0; i < max_options; i++) { - if (!strcmp(buf, option[i])) - break; - } - - switch (i) { - case 0: - adapter->scantype = cmd_scan_type_active; - break; - case 1: - adapter->scantype = cmd_scan_type_passive; - break; - case 2: - wrq->u.data.length = strlen(option[adapter->scantype]) + 1; - - if (copy_to_user(wrq->u.data.pointer, - option[adapter->scantype], - wrq->u.data.length)) { - lbs_pr_debug(1, "Copy to user failed\n"); - ret = -EFAULT; - } - - break; - default: - lbs_pr_debug(1, "Invalid Scan type Ioctl Option\n"); - ret = -EINVAL; - break; - } - - return ret; -} - -static int wlan_scan_mode_ioctl(wlan_private * priv, struct iwreq *wrq) +static int wlan_set_region(wlan_private * priv, u16 region_code) { - wlan_adapter *adapter = priv->adapter; - u8 buf[12]; - u8 *option[] = { "bss", "ibss", "any", "get" }; - int i, max_options = (sizeof(option) / sizeof(option[0])); - int ret = 0; - - ENTER(); - - memset(buf, 0, sizeof(buf)); - - if (copy_from_user(buf, wrq->u.data.pointer, min_t(size_t, sizeof(buf), - wrq->u.data.length))) { - lbs_pr_debug(1, "Copy from user failed\n"); - return -EFAULT; - } - - lbs_pr_debug(1, "Scan mode Option = %s\n", buf); - - buf[sizeof(buf) - 1] = '\0'; + int i; - for (i = 0; i < max_options; i++) { - if (!strcmp(buf, option[i])) + for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) { + // use the region code to search for the index + if (region_code == libertas_region_code_to_index[i]) { + priv->adapter->regiontableindex = (u16) i; + priv->adapter->regioncode = region_code; break; - } - - switch (i) { - - case 0: - adapter->scanmode = cmd_bss_type_bss; - break; - case 1: - adapter->scanmode = cmd_bss_type_ibss; - break; - case 2: - adapter->scanmode = cmd_bss_type_any; - break; - case 3: - - wrq->u.data.length = strlen(option[adapter->scanmode - 1]) + 1; - - lbs_pr_debug(1, "Get Scan mode Option = %s\n", - option[adapter->scanmode - 1]); - - lbs_pr_debug(1, "Scan mode length %d\n", wrq->u.data.length); - - if (copy_to_user(wrq->u.data.pointer, - option[adapter->scanmode - 1], - wrq->u.data.length)) { - lbs_pr_debug(1, "Copy to user failed\n"); - ret = -EFAULT; } - lbs_pr_debug(1, "GET Scan type Option after copy = %s\n", - (char *)wrq->u.data.pointer); - - break; - - default: - lbs_pr_debug(1, "Invalid Scan mode Ioctl Option\n"); - ret = -EINVAL; - break; } - LEAVE(); - return ret; -} - -/** - * @brief Get/Set Adhoc G Rate - * - * @param priv A pointer to wlan_private structure - * @param wrq A pointer to user data - * @return 0--success, otherwise fail - */ -static int wlan_do_set_grate_ioctl(wlan_private * priv, struct iwreq *wrq) -{ - wlan_adapter *adapter = priv->adapter; - int data, data1; - int *val; - - ENTER(); + // if it's unidentified region code + if (i >= MRVDRV_MAX_REGION_CODE) { + lbs_pr_debug(1, "region Code not identified\n"); + LEAVE(); + return -1; + } - data1 = SUBCMD_DATA(wrq); - switch (data1) { - case 0: - adapter->adhoc_grate_enabled = 0; - break; - case 1: - adapter->adhoc_grate_enabled = 1; - break; - case 2: - break; - default: + if (libertas_set_regiontable(priv, priv->adapter->regioncode, 0)) { + LEAVE(); return -EINVAL; } - data = adapter->adhoc_grate_enabled; - val = (int *)wrq->u.name; - *val = data; - LEAVE(); + return 0; } @@ -1752,36 +817,8 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd) lbs_pr_debug(1, "libertas_do_ioctl: ioctl cmd = 0x%x\n", cmd); switch (cmd) { - case WLANSCAN_TYPE: - lbs_pr_debug(1, "Scan type Ioctl\n"); - ret = wlan_scan_type_ioctl(priv, wrq); - break; - case WLAN_SETNONE_GETNONE: /* set WPA mode on/off ioctl #20 */ switch (wrq->u.data.flags) { - case WLANDEAUTH: - lbs_pr_debug(1, "Deauth\n"); - libertas_send_deauth(priv); - break; - - case WLANADHOCSTOP: - lbs_pr_debug(1, "Adhoc stop\n"); - ret = libertas_do_adhocstop_ioctl(priv); - break; - - case WLANRADIOON: - wlan_radio_ioctl(priv, 1); - break; - - case WLANRADIOOFF: - wlan_radio_ioctl(priv, 0); - break; - case WLANWLANIDLEON: - libertas_idle_on(priv); - break; - case WLANWLANIDLEOFF: - libertas_idle_off(priv); - break; case WLAN_SUBCMD_BT_RESET: /* bt_reset */ wlan_bt_reset_ioctl(priv); break; @@ -1791,81 +828,6 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd) } /* End of switch */ break; - case WLAN_SETINT_GETINT: - /* The first 4 bytes of req->ifr_data is sub-ioctl number - * after 4 bytes sits the payload. - */ - subcmd = (int)req->ifr_data; //from iwpriv subcmd - switch (subcmd) { - case WLANNF: - ret = wlan_get_nf(priv, wrq); - break; - case WLANRSSI: - ret = wlan_get_rssi(priv, wrq); - break; - case WLANENABLE11D: - ret = libertas_cmd_enable_11d(priv, wrq); - break; - case WLANADHOCGRATE: - ret = wlan_do_set_grate_ioctl(priv, wrq); - break; - case WLAN_SUBCMD_SET_PRESCAN: - ret = wlan_subcmd_setprescan_ioctl(priv, wrq); - break; - } - break; - - case WLAN_SETONEINT_GETONEINT: - switch (wrq->u.data.flags) { - case WLAN_BEACON_INTERVAL: - ret = wlan_beacon_interval(priv, wrq); - break; - - case WLAN_LISTENINTRVL: - if (!wrq->u.data.length) { - int data; - lbs_pr_debug(1, "Get locallisteninterval value\n"); -#define GET_ONE_INT 1 - data = adapter->locallisteninterval; - if (copy_to_user(wrq->u.data.pointer, - &data, sizeof(int))) { - lbs_pr_debug(1, "Copy to user failed\n"); - return -EFAULT; - } - - wrq->u.data.length = GET_ONE_INT; - } else { - int data; - if (copy_from_user - (&data, wrq->u.data.pointer, sizeof(int))) { - lbs_pr_debug(1, "Copy from user failed\n"); - return -EFAULT; - } - - lbs_pr_debug(1, "Set locallisteninterval = %d\n", - data); -#define MAX_U16_VAL 65535 - if (data > MAX_U16_VAL) { - lbs_pr_debug(1, "Exceeds U16 value\n"); - return -EINVAL; - } - adapter->locallisteninterval = data; - } - break; - case WLAN_TXCONTROL: - ret = wlan_txcontrol(priv, wrq); //adds for txcontrol ioctl - break; - - case WLAN_NULLPKTINTERVAL: - ret = wlan_null_pkt_interval(priv, wrq); - break; - - default: - ret = -EOPNOTSUPP; - break; - } - break; - case WLAN_SETONEINT_GETNONE: /* The first 4 bytes of req->ifr_data is sub-ioctl number * after 4 bytes sits the payload. @@ -1876,62 +838,10 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd) subcmd = (int)req->ifr_data; //from iwpriv subcmd switch (subcmd) { - case WLAN_SUBCMD_SETRXANTENNA: /* SETRXANTENNA */ - idata = SUBCMD_DATA(wrq); - ret = setrxantenna(priv, idata); - break; - case WLAN_SUBCMD_SETTXANTENNA: /* SETTXANTENNA */ - idata = SUBCMD_DATA(wrq); - ret = settxantenna(priv, idata); - break; - case WLAN_SET_ATIM_WINDOW: - adapter->atimwindow = SUBCMD_DATA(wrq); - adapter->atimwindow = min_t(__u16, adapter->atimwindow, 50); - break; - case WLANSETBCNAVG: - adapter->bcn_avg_factor = SUBCMD_DATA(wrq); - if (adapter->bcn_avg_factor == 0) - adapter->bcn_avg_factor = - DEFAULT_BCN_AVG_FACTOR; - if (adapter->bcn_avg_factor > DEFAULT_BCN_AVG_FACTOR) - adapter->bcn_avg_factor = - DEFAULT_BCN_AVG_FACTOR; - break; - case WLANSETDATAAVG: - adapter->data_avg_factor = SUBCMD_DATA(wrq); - if (adapter->data_avg_factor == 0) - adapter->data_avg_factor = - DEFAULT_DATA_AVG_FACTOR; - if (adapter->data_avg_factor > DEFAULT_DATA_AVG_FACTOR) - adapter->data_avg_factor = - DEFAULT_DATA_AVG_FACTOR; - break; case WLANSETREGION: idata = SUBCMD_DATA(wrq); ret = wlan_set_region(priv, (u16) idata); break; - - case WLAN_SET_LISTEN_INTERVAL: - idata = SUBCMD_DATA(wrq); - adapter->listeninterval = (u16) idata; - break; - - case WLAN_SET_MULTIPLE_DTIM: - ret = wlan_set_multiple_dtim_ioctl(priv, req); - break; - - case WLAN_SET_LINKMODE: - ret = wlan_set_linkmode_ioctl(priv, req); - break; - - case WLAN_SET_RADIOMODE: - ret = wlan_set_radiomode_ioctl(priv, req); - break; - - case WLAN_SET_DEBUGMODE: - ret = wlan_set_debugmode_ioctl(priv, req); - break; - case WLAN_SUBCMD_MESH_SET_TTL: idata = SUBCMD_DATA(wrq); ret = wlan_mesh_set_ttl_ioctl(priv, idata); @@ -1944,38 +854,8 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd) break; - case WLAN_SETNONE_GETTWELVE_CHAR: /* Get Antenna settings */ - /* - * We've not used IW_PRIV_TYPE_FIXED so sub-ioctl number is - * in flags of iwreq structure, otherwise it will be in - * mode member of iwreq structure. - */ - switch ((int)wrq->u.data.flags) { - case WLAN_SUBCMD_GETRXANTENNA: /* Get Rx Antenna */ - ret = wlan_subcmd_getrxantenna_ioctl(priv, req); - break; - - case WLAN_SUBCMD_GETTXANTENNA: /* Get Tx Antenna */ - ret = wlan_subcmd_gettxantenna_ioctl(priv, req); - break; - - case WLAN_GET_TSF: - ret = wlan_get_tsf_ioctl(priv, wrq); - break; - } - break; - case WLAN_SET128CHAR_GET128CHAR: switch ((int)wrq->u.data.flags) { - - case WLANSCAN_MODE: - lbs_pr_debug(1, "Scan mode Ioctl\n"); - ret = wlan_scan_mode_ioctl(priv, wrq); - break; - - case WLAN_GET_ADHOC_STATUS: - ret = wlan_get_adhoc_status_ioctl(priv, wrq); - break; case WLAN_SUBCMD_BT_ADD: ret = wlan_bt_add_ioctl(priv, req); break; @@ -2008,40 +888,10 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd) case WLAN_SETNONE_GETONEINT: switch ((int)req->ifr_data) { - case WLANGETBCNAVG: - pdata = (int *)wrq->u.name; - *pdata = (int)adapter->bcn_avg_factor; - break; - case WLANGETREGION: pdata = (int *)wrq->u.name; *pdata = (int)adapter->regioncode; break; - - case WLAN_GET_LISTEN_INTERVAL: - pdata = (int *)wrq->u.name; - *pdata = (int)adapter->listeninterval; - break; - - case WLAN_GET_LINKMODE: - req->ifr_data = (char *)((u32) adapter->linkmode); - break; - - case WLAN_GET_RADIOMODE: - req->ifr_data = (char *)((u32) adapter->radiomode); - break; - - case WLAN_GET_DEBUGMODE: - req->ifr_data = (char *)((u32) adapter->debugmode); - break; - - case WLAN_GET_MULTIPLE_DTIM: - pdata = (int *)wrq->u.name; - *pdata = (int)adapter->multipledtim; - break; - case WLAN_GET_TX_RATE: - ret = wlan_get_txrate_ioctl(priv, req); - break; case WLAN_SUBCMD_FWT_CLEANUP: /* fwt_cleanup */ ret = wlan_fwt_cleanup_ioctl(priv, req); break; @@ -2061,196 +911,8 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd) break; - case WLANGETLOG: - ret = wlan_do_getlog_ioctl(priv, wrq); - break; - case WLAN_SET_GET_SIXTEEN_INT: switch ((int)wrq->u.data.flags) { - case WLAN_TPCCFG: - { - int data[5]; - struct cmd_ds_802_11_tpc_cfg cfg; - memset(&cfg, 0, sizeof(cfg)); - if ((wrq->u.data.length > 1) - && (wrq->u.data.length != 5)) - return -1; - - if (wrq->u.data.length == 0) { - cfg.action = - cpu_to_le16 - (cmd_act_get); - } else { - if (copy_from_user - (data, wrq->u.data.pointer, - sizeof(int) * 5)) { - lbs_pr_debug(1, - "Copy from user failed\n"); - return -EFAULT; - } - - cfg.action = - cpu_to_le16 - (cmd_act_set); - cfg.enable = data[0]; - cfg.usesnr = data[1]; - cfg.P0 = data[2]; - cfg.P1 = data[3]; - cfg.P2 = data[4]; - } - - ret = - libertas_prepare_and_send_command(priv, - cmd_802_11_tpc_cfg, - 0, - cmd_option_waitforrsp, - 0, (void *)&cfg); - - data[0] = cfg.enable; - data[1] = cfg.usesnr; - data[2] = cfg.P0; - data[3] = cfg.P1; - data[4] = cfg.P2; - if (copy_to_user - (wrq->u.data.pointer, data, - sizeof(int) * 5)) { - lbs_pr_debug(1, "Copy to user failed\n"); - return -EFAULT; - } - - wrq->u.data.length = 5; - } - break; - - case WLAN_POWERCFG: - { - int data[4]; - struct cmd_ds_802_11_pwr_cfg cfg; - memset(&cfg, 0, sizeof(cfg)); - if ((wrq->u.data.length > 1) - && (wrq->u.data.length != 4)) - return -1; - if (wrq->u.data.length == 0) { - cfg.action = - cpu_to_le16 - (cmd_act_get); - } else { - if (copy_from_user - (data, wrq->u.data.pointer, - sizeof(int) * 4)) { - lbs_pr_debug(1, - "Copy from user failed\n"); - return -EFAULT; - } - - cfg.action = - cpu_to_le16 - (cmd_act_set); - cfg.enable = data[0]; - cfg.PA_P0 = data[1]; - cfg.PA_P1 = data[2]; - cfg.PA_P2 = data[3]; - } - ret = - libertas_prepare_and_send_command(priv, - cmd_802_11_pwr_cfg, - 0, - cmd_option_waitforrsp, - 0, (void *)&cfg); - data[0] = cfg.enable; - data[1] = cfg.PA_P0; - data[2] = cfg.PA_P1; - data[3] = cfg.PA_P2; - if (copy_to_user - (wrq->u.data.pointer, data, - sizeof(int) * 4)) { - lbs_pr_debug(1, "Copy to user failed\n"); - return -EFAULT; - } - - wrq->u.data.length = 4; - } - break; - case WLAN_AUTO_FREQ_SET: - { - int data[3]; - struct cmd_ds_802_11_afc afc; - memset(&afc, 0, sizeof(afc)); - if (wrq->u.data.length != 3) - return -1; - if (copy_from_user - (data, wrq->u.data.pointer, - sizeof(int) * 3)) { - lbs_pr_debug(1, "Copy from user failed\n"); - return -EFAULT; - } - afc.afc_auto = data[0]; - - if (afc.afc_auto != 0) { - afc.threshold = data[1]; - afc.period = data[2]; - } else { - afc.timing_offset = data[1]; - afc.carrier_offset = data[2]; - } - ret = - libertas_prepare_and_send_command(priv, - cmd_802_11_set_afc, - 0, - cmd_option_waitforrsp, - 0, (void *)&afc); - } - break; - case WLAN_AUTO_FREQ_GET: - { - int data[3]; - struct cmd_ds_802_11_afc afc; - memset(&afc, 0, sizeof(afc)); - ret = - libertas_prepare_and_send_command(priv, - cmd_802_11_get_afc, - 0, - cmd_option_waitforrsp, - 0, (void *)&afc); - data[0] = afc.afc_auto; - data[1] = afc.timing_offset; - data[2] = afc.carrier_offset; - if (copy_to_user - (wrq->u.data.pointer, data, - sizeof(int) * 3)) { - lbs_pr_debug(1, "Copy to user failed\n"); - return -EFAULT; - } - - wrq->u.data.length = 3; - } - break; - case WLAN_SCANPROBES: - { - int data; - if (wrq->u.data.length > 0) { - if (copy_from_user - (&data, wrq->u.data.pointer, - sizeof(int))) { - lbs_pr_debug(1, - "Copy from user failed\n"); - return -EFAULT; - } - - adapter->scanprobes = data; - } else { - data = adapter->scanprobes; - if (copy_to_user - (wrq->u.data.pointer, &data, - sizeof(int))) { - lbs_pr_debug(1, - "Copy to user failed\n"); - return -EFAULT; - } - } - wrq->u.data.length = 1; - } - break; case WLAN_LED_GPIO_CTRL: { int i; @@ -2314,17 +976,6 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd) wrq->u.data.length = gpio->header.len; } break; - case WLAN_ADAPT_RATESET: - ret = wlan_adapt_rateset(priv, wrq); - break; - case WLAN_INACTIVITY_TIMEOUT: - ret = wlan_inactivity_timeout(priv, wrq); - break; - case WLANSNR: - ret = wlan_get_snr(priv, wrq); - break; - case WLAN_GET_RXINFO: - ret = wlan_get_rxinfo(priv, wrq); } break; diff --git a/drivers/net/wireless/libertas/join.c b/drivers/net/wireless/libertas/join.c index 2292c14a1531..ec40d32183ed 100644 --- a/drivers/net/wireless/libertas/join.c +++ b/drivers/net/wireless/libertas/join.c @@ -96,20 +96,6 @@ int libertas_send_deauth(wlan_private * priv) return ret; } -int libertas_do_adhocstop_ioctl(wlan_private * priv) -{ - wlan_adapter *adapter = priv->adapter; - int ret = 0; - - if (adapter->mode == IW_MODE_ADHOC && - adapter->connect_status == libertas_connected) - ret = libertas_stop_adhoc_network(priv); - else - ret = -ENOTSUPP; - - return ret; -} - /** * @brief Associate to a specific BSS discovered in a scan * @@ -261,127 +247,6 @@ int libertas_send_deauthentication(wlan_private * priv) 0, cmd_option_waitforrsp, 0, NULL); } -/** - * @brief Set Idle Off - * - * @param priv A pointer to wlan_private structure - * @return 0 --success, otherwise fail - */ -int libertas_idle_off(wlan_private * priv) -{ - wlan_adapter *adapter = priv->adapter; - int ret = 0; - const u8 zeromac[] = { 0, 0, 0, 0, 0, 0 }; - int i; - - ENTER(); - - if (adapter->connect_status == libertas_disconnected) { - if (adapter->mode == IW_MODE_INFRA) { - if (memcmp(adapter->previousbssid, zeromac, - sizeof(zeromac)) != 0) { - - lbs_pr_debug(1, "Previous SSID = %s\n", - adapter->previousssid.ssid); - lbs_pr_debug(1, "Previous BSSID = " - "%02x:%02x:%02x:%02x:%02x:%02x:\n", - adapter->previousbssid[0], - adapter->previousbssid[1], - adapter->previousbssid[2], - adapter->previousbssid[3], - adapter->previousbssid[4], - adapter->previousbssid[5]); - - i = libertas_find_SSID_in_list(adapter, - &adapter->previousssid, - adapter->previousbssid, - adapter->mode); - - if (i < 0) { - libertas_send_specific_BSSID_scan(priv, - adapter-> - previousbssid, - 1); - i = libertas_find_SSID_in_list(adapter, - &adapter-> - previousssid, - adapter-> - previousbssid, - adapter->mode); - } - - if (i < 0) { - /* If the BSSID could not be found, try just the SSID */ - i = libertas_find_SSID_in_list(adapter, - &adapter-> - previousssid, NULL, - adapter->mode); - } - - if (i < 0) { - libertas_send_specific_SSID_scan(priv, - &adapter-> - previousssid, - 1); - i = libertas_find_SSID_in_list(adapter, - &adapter-> - previousssid, NULL, - adapter->mode); - } - - if (i >= 0) { - ret = - wlan_associate(priv, - &adapter-> - scantable[i]); - } - } - } else if (adapter->mode == IW_MODE_ADHOC) { - ret = libertas_prepare_and_send_command(priv, - cmd_802_11_ad_hoc_start, - 0, - cmd_option_waitforrsp, - 0, &adapter->previousssid); - } - } - /* else it is connected */ - - lbs_pr_debug(1, "\nwlanidle is off"); - LEAVE(); - return ret; -} - -/** - * @brief Set Idle On - * - * @param priv A pointer to wlan_private structure - * @return 0 --success, otherwise fail - */ -int libertas_idle_on(wlan_private * priv) -{ - wlan_adapter *adapter = priv->adapter; - int ret = 0; - - if (adapter->connect_status == libertas_connected) { - if (adapter->mode == IW_MODE_INFRA) { - lbs_pr_debug(1, "Previous SSID = %s\n", - adapter->previousssid.ssid); - memmove(&adapter->previousssid, - &adapter->curbssparams.ssid, - sizeof(struct WLAN_802_11_SSID)); - libertas_send_deauth(priv); - - } else if (adapter->mode == IW_MODE_ADHOC) { - ret = libertas_stop_adhoc_network(priv); - } - - } - - lbs_pr_debug(1, "\nwlanidle is on"); - - return ret; -} - /** * @brief This function prepares command of authenticate. * diff --git a/drivers/net/wireless/libertas/join.h b/drivers/net/wireless/libertas/join.h index 0e6d9288506d..115f5a8ba346 100644 --- a/drivers/net/wireless/libertas/join.h +++ b/drivers/net/wireless/libertas/join.h @@ -37,10 +37,6 @@ extern int libertas_ret_80211_disassociate(wlan_private * priv, extern int libertas_ret_80211_associate(wlan_private * priv, struct cmd_ds_command *resp); -extern int libertas_idle_on(wlan_private * priv); -extern int libertas_idle_off(wlan_private * priv); - -extern int libertas_do_adhocstop_ioctl(wlan_private * priv); extern int libertas_reassociation_thread(void *data); struct WLAN_802_11_SSID; diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c index c62ffcd214c2..69f52b6e59c8 100644 --- a/drivers/net/wireless/libertas/wext.c +++ b/drivers/net/wireless/libertas/wext.c @@ -986,136 +986,17 @@ static const struct iw_priv_args wlan_private_args[] = { /* * { cmd, set_args, get_args, name } */ - { - WLANSCAN_TYPE, - IW_PRIV_TYPE_CHAR | 8, - IW_PRIV_TYPE_CHAR | 8, - "scantype"}, - - { - WLAN_SETINT_GETINT, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - ""}, - { - WLANNF, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "getNF"}, - { - WLANRSSI, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "getRSSI"}, - { - WLANENABLE11D, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "enable11d"}, - { - WLANADHOCGRATE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "adhocgrate"}, - - { - WLAN_SUBCMD_SET_PRESCAN, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "prescan"}, - { - WLAN_SETONEINT_GETONEINT, - IW_PRIV_TYPE_INT | 1, - IW_PRIV_TYPE_INT | 1, - ""}, - { - WLAN_BEACON_INTERVAL, - IW_PRIV_TYPE_INT | 1, - IW_PRIV_TYPE_INT | 1, - "bcninterval"}, - { - WLAN_LISTENINTRVL, - IW_PRIV_TYPE_INT | 1, - IW_PRIV_TYPE_INT | 1, - "lolisteninter"}, - { - WLAN_TXCONTROL, - IW_PRIV_TYPE_INT | 1, - IW_PRIV_TYPE_INT | 1, - "txcontrol"}, - { - WLAN_NULLPKTINTERVAL, - IW_PRIV_TYPE_INT | 1, - IW_PRIV_TYPE_INT | 1, - "psnullinterval"}, /* Using iwpriv sub-command feature */ { WLAN_SETONEINT_GETNONE, /* IOCTL: 24 */ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, IW_PRIV_TYPE_NONE, ""}, - - { - WLAN_SUBCMD_SETRXANTENNA, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_NONE, - "setrxant"}, - { - WLAN_SUBCMD_SETTXANTENNA, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_NONE, - "settxant"}, - { - WLANSETENCRYPTIONMODE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_NONE, - "encryptionmode", - }, { WLANSETREGION, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, IW_PRIV_TYPE_NONE, "setregioncode"}, - { - WLAN_SET_LISTEN_INTERVAL, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_NONE, - "setlisteninter"}, - { - WLAN_SET_MULTIPLE_DTIM, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_NONE, - "setmultipledtim"}, - { - WLAN_SET_ATIM_WINDOW, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_NONE, - "atimwindow"}, - { - WLANSETBCNAVG, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_NONE, - "setbcnavg"}, - { - WLANSETDATAAVG, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_NONE, - "setdataavg"}, - { - WLAN_SET_LINKMODE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_NONE, - "linkmode"}, - { - WLAN_SET_RADIOMODE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_NONE, - "radiomode"}, - { - WLAN_SET_DEBUGMODE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - IW_PRIV_TYPE_NONE, - "debugmode"}, { WLAN_SUBCMD_MESH_SET_TTL, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, @@ -1131,41 +1012,6 @@ static const struct iw_priv_args wlan_private_args[] = { IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getregioncode"}, - { - WLAN_GET_LISTEN_INTERVAL, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "getlisteninter"}, - { - WLAN_GET_MULTIPLE_DTIM, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "getmultipledtim"}, - { - WLAN_GET_TX_RATE, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "gettxrate"}, - { - WLANGETBCNAVG, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "getbcnavg"}, - { - WLAN_GET_LINKMODE, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_linkmode"}, - { - WLAN_GET_RADIOMODE, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_radiomode"}, - { - WLAN_GET_DEBUGMODE, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_debugmode"}, { WLAN_SUBCMD_FWT_CLEANUP, IW_PRIV_TYPE_NONE, @@ -1181,61 +1027,11 @@ static const struct iw_priv_args wlan_private_args[] = { IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "mesh_get_ttl"}, - { - WLAN_SETNONE_GETTWELVE_CHAR, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_CHAR | 12, - ""}, - { - WLAN_SUBCMD_GETRXANTENNA, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_CHAR | 12, - "getrxant"}, - { - WLAN_SUBCMD_GETTXANTENNA, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_CHAR | 12, - "gettxant"}, - { - WLAN_GET_TSF, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_CHAR | 12, - "gettsf"}, { WLAN_SETNONE_GETNONE, IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_NONE, ""}, - { - WLANDEAUTH, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_NONE, - "deauth"}, - { - WLANADHOCSTOP, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_NONE, - "adhocstop"}, - { - WLANRADIOON, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_NONE, - "radioon"}, - { - WLANRADIOOFF, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_NONE, - "radiooff"}, - { - WLANWLANIDLEON, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_NONE, - "wlanidle-on"}, - { - WLANWLANIDLEOFF, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_NONE, - "wlanidle-off"}, { WLAN_SUBCMD_FWT_RESET, IW_PRIV_TYPE_NONE, @@ -1298,86 +1094,16 @@ static const struct iw_priv_args wlan_private_args[] = { IW_PRIV_TYPE_CHAR | 128, IW_PRIV_TYPE_CHAR | 128, "fwt_list_route"}, - { - WLANSCAN_MODE, - IW_PRIV_TYPE_CHAR | 128, - IW_PRIV_TYPE_CHAR | 128, - "scanmode"}, - { - WLAN_GET_ADHOC_STATUS, - IW_PRIV_TYPE_CHAR | 128, - IW_PRIV_TYPE_CHAR | 128, - "getadhocstatus"}, - { - WLAN_SETNONE_GETWORDCHAR, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_CHAR | 128, - ""}, - { - WLANGETLOG, - IW_PRIV_TYPE_NONE, - IW_PRIV_TYPE_CHAR | GETLOG_BUFSIZE, - "getlog"}, { WLAN_SET_GET_SIXTEEN_INT, IW_PRIV_TYPE_INT | 16, IW_PRIV_TYPE_INT | 16, ""}, - { - WLAN_TPCCFG, - IW_PRIV_TYPE_INT | 16, - IW_PRIV_TYPE_INT | 16, - "tpccfg"}, - { - WLAN_POWERCFG, - IW_PRIV_TYPE_INT | 16, - IW_PRIV_TYPE_INT | 16, - "powercfg"}, - { - WLAN_AUTO_FREQ_SET, - IW_PRIV_TYPE_INT | 16, - IW_PRIV_TYPE_INT | 16, - "setafc"}, - { - WLAN_AUTO_FREQ_GET, - IW_PRIV_TYPE_INT | 16, - IW_PRIV_TYPE_INT | 16, - "getafc"}, - { - WLAN_SCANPROBES, - IW_PRIV_TYPE_INT | 16, - IW_PRIV_TYPE_INT | 16, - "scanprobes"}, { WLAN_LED_GPIO_CTRL, IW_PRIV_TYPE_INT | 16, IW_PRIV_TYPE_INT | 16, "ledgpio"}, - { - WLAN_ADAPT_RATESET, - IW_PRIV_TYPE_INT | 16, - IW_PRIV_TYPE_INT | 16, - "rateadapt"}, - { - WLAN_INACTIVITY_TIMEOUT, - IW_PRIV_TYPE_INT | 16, - IW_PRIV_TYPE_INT | 16, - "inactivityto"}, - { - WLANSNR, - IW_PRIV_TYPE_INT | 16, - IW_PRIV_TYPE_INT | 16, - "getSNR"}, - { - WLAN_GET_RATE, - IW_PRIV_TYPE_INT | 16, - IW_PRIV_TYPE_INT | 16, - "getrate"}, - { - WLAN_GET_RXINFO, - IW_PRIV_TYPE_INT | 16, - IW_PRIV_TYPE_INT | 16, - "getrxinfo"}, }; static struct iw_statistics *wlan_get_wireless_stats(struct net_device *dev) diff --git a/drivers/net/wireless/libertas/wext.h b/drivers/net/wireless/libertas/wext.h index 39f367c38d90..15cfaaf0797f 100644 --- a/drivers/net/wireless/libertas/wext.h +++ b/drivers/net/wireless/libertas/wext.h @@ -10,88 +10,22 @@ /** PRIVATE CMD ID */ #define WLANIOCTL SIOCIWFIRSTPRIV -#define WLANSETWPAIE (WLANIOCTL + 0) - -#define WLAN_SETINT_GETINT (WLANIOCTL + 7) -#define WLANNF 1 -#define WLANRSSI 2 -#define WLANENABLE11D 5 -#define WLANADHOCGRATE 6 -#define WLAN_SUBCMD_SET_PRESCAN 11 - #define WLAN_SETNONE_GETNONE (WLANIOCTL + 8) -#define WLANDEAUTH 1 -#define WLANRADIOON 2 -#define WLANRADIOOFF 3 -#define WLANREMOVEADHOCAES 4 -#define WLANADHOCSTOP 5 -#define WLANCIPHERTEST 6 -#define WLANCRYPTOTEST 7 - -#define WLANWLANIDLEON 10 -#define WLANWLANIDLEOFF 11 #define WLAN_SUBCMD_BT_RESET 13 #define WLAN_SUBCMD_FWT_RESET 14 -#define WLANGETLOG (WLANIOCTL + 9) -#define GETLOG_BUFSIZE 300 - -#define WLANSCAN_TYPE (WLANIOCTL + 11) - #define WLAN_SETNONE_GETONEINT (WLANIOCTL + 15) #define WLANGETREGION 1 -#define WLAN_GET_LISTEN_INTERVAL 2 -#define WLAN_GET_MULTIPLE_DTIM 3 -#define WLAN_GET_TX_RATE 4 -#define WLANGETBCNAVG 5 -#define WLAN_GET_LINKMODE 6 -#define WLAN_GET_RADIOMODE 7 -#define WLAN_GET_DEBUGMODE 8 #define WLAN_SUBCMD_FWT_CLEANUP 15 #define WLAN_SUBCMD_FWT_TIME 16 #define WLAN_SUBCMD_MESH_GET_TTL 17 -#define WLANREGCFRDWR (WLANIOCTL + 18) - -#define WLAN_SETNONE_GETTWELVE_CHAR (WLANIOCTL + 19) -#define WLAN_SUBCMD_GETRXANTENNA 1 -#define WLAN_SUBCMD_GETTXANTENNA 2 -#define WLAN_GET_TSF 3 - -#define WLAN_SETNONE_GETWORDCHAR (WLANIOCTL + 21) -#define WLANGETADHOCAES 1 - -#define WLAN_SETONEINT_GETONEINT (WLANIOCTL + 23) -#define WLAN_BEACON_INTERVAL 1 -#define WLAN_LISTENINTRVL 4 - -#define WLAN_TXCONTROL 6 -#define WLAN_NULLPKTINTERVAL 7 - #define WLAN_SETONEINT_GETNONE (WLANIOCTL + 24) -#define WLAN_SUBCMD_SETRXANTENNA 1 -#define WLAN_SUBCMD_SETTXANTENNA 2 -#define WLANSETAUTHALG 5 -#define WLANSET8021XAUTHALG 6 -#define WLANSETENCRYPTIONMODE 7 #define WLANSETREGION 8 -#define WLAN_SET_LISTEN_INTERVAL 9 - -#define WLAN_SET_MULTIPLE_DTIM 10 -#define WLAN_SET_ATIM_WINDOW 11 -#define WLANSETBCNAVG 13 -#define WLANSETDATAAVG 14 -#define WLAN_SET_LINKMODE 15 -#define WLAN_SET_RADIOMODE 16 -#define WLAN_SET_DEBUGMODE 17 #define WLAN_SUBCMD_MESH_SET_TTL 18 #define WLAN_SET128CHAR_GET128CHAR (WLANIOCTL + 25) -#define WLANSCAN_MODE 6 - -#define WLAN_GET_ADHOC_STATUS 9 - #define WLAN_SUBCMD_BT_ADD 18 #define WLAN_SUBCMD_BT_DEL 19 #define WLAN_SUBCMD_BT_LIST 20 @@ -103,27 +37,8 @@ #define WLAN_SUBCMD_FWT_LIST_ROUTE 26 #define WLAN_SET_GET_SIXTEEN_INT (WLANIOCTL + 29) -#define WLAN_TPCCFG 1 -#define WLAN_POWERCFG 2 - -#define WLAN_AUTO_FREQ_SET 3 -#define WLAN_AUTO_FREQ_GET 4 #define WLAN_LED_GPIO_CTRL 5 -#define WLAN_SCANPROBES 6 -#define WLAN_ADAPT_RATESET 8 -#define WLAN_INACTIVITY_TIMEOUT 9 -#define WLANSNR 10 -#define WLAN_GET_RATE 11 -#define WLAN_GET_RXINFO 12 - -#define WLANCMD52RDWR (WLANIOCTL + 30) -#define WLANCMD53RDWR (WLANIOCTL + 31) -#define CMD53BUFLEN 32 -#define REG_MAC 0x19 -#define REG_BBP 0x1a -#define REG_RF 0x1b -#define REG_EEPROM 0x59 #define WLAN_LINKMODE_802_3 0 #define WLAN_LINKMODE_802_11 2 #define WLAN_RADIOMODE_NONE 0 -- 2.30.2