From 4ae72a1e469a3bcfd3c1f77dac62392c489bf9ca Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 2 Feb 2007 16:22:30 +0900 Subject: [PATCH] libata: improve probe failure handling * Move forcing device to PIO0 on device disable into ata_dev_disable(). This makes both old and new EHs act the same way. * Speed down only PIO mode on probe failure. All commands used during probing are PIO commands. There's no point in speeding down DMA. * Retry at least once after -ENODEV. Some devices report garbled IDENTIFY data after certain events. This shouldn't cause device detach and re-attach. * Rearrange EH failure path for simplicity. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 39 +++++++++++++++++++-------------------- drivers/ata/libata-eh.c | 35 ++++++++++++++++++----------------- 2 files changed, 37 insertions(+), 37 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 249d487c091e..24c6505f062d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -600,6 +600,8 @@ void ata_dev_disable(struct ata_device *dev) { if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) { ata_dev_printk(dev, KERN_WARNING, "disabled\n"); + ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | + ATA_DNXFER_QUIET); dev->class++; } } @@ -1778,9 +1780,8 @@ int ata_bus_probe(struct ata_port *ap) { unsigned int classes[ATA_MAX_DEVICES]; int tries[ATA_MAX_DEVICES]; - int i, rc, down_xfermask; + int i, rc; struct ata_device *dev; - int dnxfer_sel; ata_port_probe(ap); @@ -1788,8 +1789,6 @@ int ata_bus_probe(struct ata_port *ap) tries[i] = ATA_PROBE_MAX_TRIES; retry: - down_xfermask = 0; - /* reset and determine device classes */ ap->ops->phy_reset(ap); @@ -1837,10 +1836,8 @@ int ata_bus_probe(struct ata_port *ap) /* configure transfer mode */ rc = ata_set_mode(ap, &dev); - if (rc) { - down_xfermask = 1; + if (rc) goto fail; - } for (i = 0; i < ATA_MAX_DEVICES; i++) if (ata_dev_enabled(&ap->device[i])) @@ -1852,27 +1849,29 @@ int ata_bus_probe(struct ata_port *ap) return -ENODEV; fail: + tries[dev->devno]--; + switch (rc) { case -EINVAL: - case -ENODEV: + /* eeek, something went very wrong, give up */ tries[dev->devno] = 0; break; + + case -ENODEV: + /* give it just one more chance */ + tries[dev->devno] = min(tries[dev->devno], 1); case -EIO: - sata_down_spd_limit(ap); - /* fall through */ - default: - tries[dev->devno]--; - dnxfer_sel = ATA_DNXFER_ANY; - if (tries[dev->devno] == 1) - dnxfer_sel = ATA_DNXFER_FORCE_PIO0; - if (down_xfermask && ata_down_xfermask_limit(dev, dnxfer_sel)) - tries[dev->devno] = 0; + if (tries[dev->devno] == 1) { + /* This is the last chance, better to slow + * down than lose it. + */ + sata_down_spd_limit(ap); + ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); + } } - if (!tries[dev->devno]) { - ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0); + if (!tries[dev->devno]) ata_dev_disable(dev); - } goto retry; } diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 7b61562cdd40..1abfdba8d99b 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1964,8 +1964,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, { struct ata_eh_context *ehc = &ap->eh_context; struct ata_device *dev; - int down_xfermask, i, rc; - int dnxfer_sel; + int i, rc; DPRINTK("ENTER\n"); @@ -1994,7 +1993,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, } retry: - down_xfermask = 0; rc = 0; /* if UNLOADING, finish immediately */ @@ -2039,10 +2037,8 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, /* configure transfer mode if necessary */ if (ehc->i.flags & ATA_EHI_SETMODE) { rc = ata_set_mode(ap, &dev); - if (rc) { - down_xfermask = 1; + if (rc) goto dev_fail; - } ehc->i.flags &= ~ATA_EHI_SETMODE; } @@ -2054,22 +2050,27 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, goto out; dev_fail: + ehc->tries[dev->devno]--; + switch (rc) { - case -ENODEV: - /* device missing, schedule probing */ - ehc->i.probe_mask |= (1 << dev->devno); case -EINVAL: + /* eeek, something went very wrong, give up */ ehc->tries[dev->devno] = 0; break; + + case -ENODEV: + /* device missing or wrong IDENTIFY data, schedule probing */ + ehc->i.probe_mask |= (1 << dev->devno); + /* give it just one more chance */ + ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1); case -EIO: - sata_down_spd_limit(ap); - default: - ehc->tries[dev->devno]--; - dnxfer_sel = ATA_DNXFER_ANY; - if (ehc->tries[dev->devno] == 1) - dnxfer_sel = ATA_DNXFER_FORCE_PIO0; - if (down_xfermask && ata_down_xfermask_limit(dev, dnxfer_sel)) - ehc->tries[dev->devno] = 0; + if (ehc->tries[dev->devno] == 1) { + /* This is the last chance, better to slow + * down than lose it. + */ + sata_down_spd_limit(ap); + ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); + } } if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) { -- 2.30.2