From 4a694dc915c9a223044ce21fc0d99e63facd1d64 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 12 Jan 2009 16:13:08 +0200 Subject: [PATCH] omap_hsmmc: Fix response type for busy after response Some MMC commands result in the card becoming busy after the response is received. This needs to be specified for the omap_hsmmc host controller, which is what this patch does. However, the effect is that some commands with no data will cause a Transfer Complete (TC) interrupt in addition to the Command Complete (CC) interrupt. In order to deal with that, the irq handler has needed a few changes also. The benefit of this change is that the omap_hsmmc host controller driver now waits for the TC interrupt while the card is busy, so the mmc_block driver needs to poll the card status just once instead of repeatedly. i.e. the net result is more sleep and less cpu. The command sequence for open-ended multi-block write with DMA is now: Issue write command CMD25 Receive CC interrupt Data is sent Receive TC interrupt (DMA is done) Issue stop command CMD12 Receive CC interrupt Card is busy Receive TC interrupt Card is now ready for next transfer Signed-off-by: Adrian Hunter Signed-off-by: Pierre Ossman --- drivers/mmc/host/omap_hsmmc.c | 38 ++++++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 9 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 5ff2ca22beea..1f84bd4a3b27 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -150,6 +150,7 @@ struct mmc_omap_host { int initstr; int slot_id; int dbclk_enabled; + int response_busy; struct omap_mmc_platform_data *pdata; }; @@ -244,10 +245,14 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd, OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK); OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); + host->response_busy = 0; if (cmd->flags & MMC_RSP_PRESENT) { if (cmd->flags & MMC_RSP_136) resptype = 1; - else + else if (cmd->flags & MMC_RSP_BUSY) { + resptype = 3; + host->response_busy = 1; + } else resptype = 2; } @@ -282,6 +287,15 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd, static void mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data) { + if (!data) { + struct mmc_request *mrq = host->mrq; + + host->mrq = NULL; + mmc_omap_fclk_lazy_disable(host); + mmc_request_done(host->mmc, mrq); + return; + } + host->data = NULL; if (host->use_dma && host->dma_ch != -1) @@ -323,7 +337,7 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd) cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10); } } - if (host->data == NULL || cmd->error) { + if ((host->data == NULL && !host->response_busy) || cmd->error) { host->mrq = NULL; mmc_request_done(host->mmc, cmd->mrq); } @@ -413,7 +427,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) struct mmc_data *data; int end_cmd = 0, end_trans = 0, status; - if (host->cmd == NULL && host->data == NULL) { + if (host->mrq == NULL) { OMAP_HSMMC_WRITE(host->base, STAT, OMAP_HSMMC_READ(host->base, STAT)); return IRQ_HANDLED; @@ -438,18 +452,24 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) } end_cmd = 1; } - if (host->data) { - mmc_dma_cleanup(host, -ETIMEDOUT); + if (host->data || host->response_busy) { + if (host->data) + mmc_dma_cleanup(host, -ETIMEDOUT); + host->response_busy = 0; mmc_omap_reset_controller_fsm(host, SRD); } } if ((status & DATA_TIMEOUT) || (status & DATA_CRC)) { - if (host->data) { - if (status & DATA_TIMEOUT) - mmc_dma_cleanup(host, -ETIMEDOUT); + if (host->data || host->response_busy) { + int err = (status & DATA_TIMEOUT) ? + -ETIMEDOUT : -EILSEQ; + + if (host->data) + mmc_dma_cleanup(host, err); else - mmc_dma_cleanup(host, -EILSEQ); + host->mrq->cmd->error = err; + host->response_busy = 0; mmc_omap_reset_controller_fsm(host, SRD); end_trans = 1; } -- 2.30.2