From 4a5b6a356a79123d3fcd780139629213afcedca8 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sat, 28 Apr 2001 17:59:11 +0000 Subject: [PATCH] Initial revision --- board/RPXlite/Makefile | 40 + board/cogent/u-boot.lds | 121 ++ board/esteem192e/Makefile | 40 + board/etx094/Makefile | 40 + board/fads/Makefile | 40 + board/hermes/Makefile | 40 + board/ip860/Makefile | 40 + board/lwmon/Makefile | 40 + board/lwmon/u-boot.lds | 122 ++ board/mbx8xx/Makefile | 40 + board/mbx8xx/csr.h | 60 + board/mbx8xx/dimm.h | 98 ++ board/mbx8xx/u-boot.lds | 122 ++ board/mbx8xx/vpd.h | 119 ++ board/rpxsuper/u-boot.lds | 117 ++ board/rsdproto/flash_asm.S | 39 + board/rsdproto/u-boot.lds | 122 ++ board/sandpoint/speed.h | 54 + board/sbc8260/u-boot.lds | 117 ++ board/sixnet/Makefile | 40 + board/sixnet/u-boot.lds | 122 ++ board/spd8xx/Makefile | 40 + board/spd8xx/u-boot.lds | 122 ++ cpu/mpc8260/speed.h | 54 + include/405_mal.h | 106 ++ include/asm-ppc/atomic.h | 95 ++ include/asm-ppc/posix_types.h | 109 ++ include/asm-ppc/signal.h | 154 +++ include/linux/posix_types.h | 48 + include/mpc8xx_irq.h | 59 + include/s_record.h | 114 ++ include/zlib.h | 434 +++++++ lib_generic/ldiv.c | 55 + lib_generic/zlib.c | 2161 +++++++++++++++++++++++++++++++++ tools/gdb/remote.c | 928 ++++++++++++++ 35 files changed, 6052 insertions(+) create mode 100644 board/RPXlite/Makefile create mode 100644 board/cogent/u-boot.lds create mode 100644 board/esteem192e/Makefile create mode 100644 board/etx094/Makefile create mode 100644 board/fads/Makefile create mode 100644 board/hermes/Makefile create mode 100644 board/ip860/Makefile create mode 100644 board/lwmon/Makefile create mode 100644 board/lwmon/u-boot.lds create mode 100644 board/mbx8xx/Makefile create mode 100644 board/mbx8xx/csr.h create mode 100644 board/mbx8xx/dimm.h create mode 100644 board/mbx8xx/u-boot.lds create mode 100644 board/mbx8xx/vpd.h create mode 100644 board/rpxsuper/u-boot.lds create mode 100644 board/rsdproto/flash_asm.S create mode 100644 board/rsdproto/u-boot.lds create mode 100644 board/sandpoint/speed.h create mode 100644 board/sbc8260/u-boot.lds create mode 100644 board/sixnet/Makefile create mode 100644 board/sixnet/u-boot.lds create mode 100644 board/spd8xx/Makefile create mode 100644 board/spd8xx/u-boot.lds create mode 100644 cpu/mpc8260/speed.h create mode 100644 include/405_mal.h create mode 100644 include/asm-ppc/atomic.h create mode 100644 include/asm-ppc/posix_types.h create mode 100644 include/asm-ppc/signal.h create mode 100644 include/linux/posix_types.h create mode 100644 include/mpc8xx_irq.h create mode 100644 include/s_record.h create mode 100644 include/zlib.h create mode 100644 lib_generic/ldiv.c create mode 100644 lib_generic/zlib.c create mode 100644 tools/gdb/remote.c diff --git a/board/RPXlite/Makefile b/board/RPXlite/Makefile new file mode 100644 index 0000000000..ef173d0366 --- /dev/null +++ b/board/RPXlite/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds new file mode 100644 index 0000000000..c3474b4550 --- /dev/null +++ b/board/cogent/u-boot.lds @@ -0,0 +1,121 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + *(.text) + common/environment.o(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} + diff --git a/board/esteem192e/Makefile b/board/esteem192e/Makefile new file mode 100644 index 0000000000..ef173d0366 --- /dev/null +++ b/board/esteem192e/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/etx094/Makefile b/board/etx094/Makefile new file mode 100644 index 0000000000..ef173d0366 --- /dev/null +++ b/board/etx094/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/fads/Makefile b/board/fads/Makefile new file mode 100644 index 0000000000..20a19b9987 --- /dev/null +++ b/board/fads/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o lamp.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/hermes/Makefile b/board/hermes/Makefile new file mode 100644 index 0000000000..ef173d0366 --- /dev/null +++ b/board/hermes/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/ip860/Makefile b/board/ip860/Makefile new file mode 100644 index 0000000000..ef173d0366 --- /dev/null +++ b/board/ip860/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/lwmon/Makefile b/board/lwmon/Makefile new file mode 100644 index 0000000000..35b84288da --- /dev/null +++ b/board/lwmon/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds new file mode 100644 index 0000000000..6e5252cf7f --- /dev/null +++ b/board/lwmon/u-boot.lds @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc8xx/start.o (.text) + common/environment.o(.text) + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} + diff --git a/board/mbx8xx/Makefile b/board/mbx8xx/Makefile new file mode 100644 index 0000000000..f8fb581e7c --- /dev/null +++ b/board/mbx8xx/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o vpd.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/mbx8xx/csr.h b/board/mbx8xx/csr.h new file mode 100644 index 0000000000..832e9241f7 --- /dev/null +++ b/board/mbx8xx/csr.h @@ -0,0 +1,60 @@ +#ifndef __csr_h +#define __csr_h + +/* + * (C) Copyright 2000 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * Control and Status Register definitions for the MBX + * + *-------------------------------------------------------------------- + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* bits for control register #1 / status register #1 */ +#define CSR1_ETEN 0x80 /* Ethernet Transceiver Enabled */ +#define CSR1_ELEN 0x40 /* Ethernet XCVR in Internal Loopback */ +#define CSR1_EAEN 0x20 /* Auto selection TP/AUI Enabled */ +#define CSR1_TPEN 0x10 /* TP manually selected */ +#define CSR1_FDDIS 0x08 /* Full Duplex Mode disabled */ +#define CSR1_FCTEN 0x04 /* Collision Testing of XCVR disabled */ +#define CSR1_COM1EN 0x02 /* COM1 signals routed to RS232 Transceiver */ +#define CSR1_XCVRDIS 0x01 /* Onboard RS232 Transceiver Disabled */ + +/* bits for control register #2 */ +#define CR2_VDDSEL 0xC0 /* PCMCIA Supply Voltage */ +#define CR2_VPPSEL 0x30 /* PCMCIA Programming Voltage */ +#define CR2_BRDFAIL 0x08 /* Board fail */ +#define CR2_SWS1 0x04 /* Software Status #2 LED */ +#define CR2_SWS2 0x02 /* Software Status #2 LED */ +#define CR2_QSPANRST 0x01 /* Reset QSPAN */ + +/* bits for status register #2 */ +#define SR2_VDDSEL 0xC0 /* PCMCIA Supply Voltage */ +#define SR2_VPPSEL 0x30 /* PCMCIA Programming Voltage */ +#define SR2_BATGD 0x08 /* Low Voltage indication for onboard bat */ +#define SR2_NVBATGD 0x04 /* Low Voltage indication for NVRAM */ +#define SR2_RDY 0x02 /* Flash programming status bit */ +#define SR2_FT 0x01 /* Reserved for Factory test purposes */ + +#define MBX_CSR1 (*((uchar *)CFG_CSR_BASE)) +#define MBX_CSR2 (*((uchar *)CFG_CSR_BASE + 1)) + +#endif /* __csr_h */ diff --git a/board/mbx8xx/dimm.h b/board/mbx8xx/dimm.h new file mode 100644 index 0000000000..b40f112356 --- /dev/null +++ b/board/mbx8xx/dimm.h @@ -0,0 +1,98 @@ +#ifndef __dimm_h +#define __dimm_h + +/* + * Module name: %M% + * Description: + * Serial Presence Detect Definitions Module + * SCCS identification: %I% + * Branch: %B% + * Sequence: %S% + * Date newest applied delta was created (MM/DD/YY): %G% + * Time newest applied delta was created (HH:MM:SS): %U% + * SCCS file name %F% + * Fully qualified SCCS file name: + * %P% + * Copyright: + * (C) COPYRIGHT MOTOROLA, INC. 1996 + * ALL RIGHTS RESERVED + * Notes: + * 1. All data was taken from an IBM application note titled + * "Serial Presence Detect Definitions". + * History: + * Date Who + * + * 10/24/96 Rob Baxter + * Initial release. + * + */ + +/* + * serial PD byte assignment address map (256 byte EEPROM) + */ +typedef struct dimm +{ + uchar n_bytes; /* 00 number of bytes written/used */ + uchar t_bytes; /* 01 total number of bytes in serial PD device */ + uchar fmt; /* 02 fundamental memory type (FPM/EDO/SDRAM) */ + uchar n_row; /* 03 number of rows */ + uchar n_col; /* 04 number of columns */ + uchar n_banks; /* 05 number of banks */ + uchar data_w_lo; /* 06 data width */ + uchar data_w_hi; /* 07 data width */ + uchar ifl; /* 08 interface levels */ + uchar a_ras; /* 09 RAS access */ + uchar a_cas; /* 0A CAS access */ + uchar ct; /* 0B configuration type (non-parity/parity/ECC) */ + uchar refresh_rt; /* 0C refresh rate/type */ + uchar p_dram_o; /* 0D primary DRAM organization */ + uchar s_dram_o; /* 0E secondary DRAM organization (parity/ECC-checkbits) */ + uchar reserved[17]; /* 0F reserved fields for future offerings */ + uchar ss_info[32]; /* 20 superset information (may be used in the future) */ + uchar m_info[64]; /* 40 manufacturer information (optional) */ + uchar unused[128]; /* 80 unused storage locations */ +} dimm_t; + +/* + * memory type definitions + */ +#define DIMM_MT_FPM 1 /* standard FPM (fast page mode) DRAM */ +#define DIMM_MT_EDO 2 /* EDO (extended data out) */ +#define DIMM_MT_PN 3 /* pipelined nibble */ +#define DIMM_MT_SDRAM 4 /* SDRAM (synchronous DRAM) */ + +/* + * row addresses definitions + */ +#define DIMM_RA_RDNDNT (1<<7) /* redundant addressing */ +#define DIMM_RA_MASK 0x7f /* number of row addresses mask */ + +/* + * module interface levels definitions + */ +#define DIMM_IFL_TTL 0 /* TTL/5V tolerant */ +#define DIMM_IFL_LVTTL 1 /* LVTTL (not 5V tolerant) */ +#define DIMM_IFL_HSTL15 2 /* HSTL 1.5 */ +#define DIMM_IFL_SSTL33 3 /* SSTL 3.3 */ +#define DIMM_IFL_SSTL25 4 /* SSTL 2.5 */ + +/* + * DIMM configuration type definitions + */ +#define DIMM_CT_NONE 0 /* none */ +#define DIMM_CT_PARITY 1 /* parity */ +#define DIMM_CT_ECC 2 /* ECC */ + +/* + * row addresses definitions + */ +#define DIMM_RRT_SR (1<<7) /* self refresh flag */ +#define DIMM_RRT_MASK 0x7f /* refresh rate mask */ +#define DIMM_RRT_NRML 0x00 /* normal (15.625us) */ +#define DIMM_RRT_R_3_9 0x01 /* reduced .25x (3.9us) */ +#define DIMM_RRT_R_7_8 0x02 /* reduced .5x (7.8us) */ +#define DIMM_RRT_E_31_3 0x03 /* extended 2x (31.3us) */ +#define DIMM_RRT_E_62_5 0x04 /* extended 4x (62.5us) */ +#define DIMM_RRT_E_125 0x05 /* extended 8x (125us) */ + +#endif /* __dimm_h */ diff --git a/board/mbx8xx/u-boot.lds b/board/mbx8xx/u-boot.lds new file mode 100644 index 0000000000..d647be362a --- /dev/null +++ b/board/mbx8xx/u-boot.lds @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc8xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} + diff --git a/board/mbx8xx/vpd.h b/board/mbx8xx/vpd.h new file mode 100644 index 0000000000..1d9eb7fe20 --- /dev/null +++ b/board/mbx8xx/vpd.h @@ -0,0 +1,119 @@ +#ifndef __vpd_h +#define __vpd_h + +/* + * Module name: %M% + * Description: + * Vital Product Data (VPD) Header Module + * SCCS identification: %I% + * Branch: %B% + * Sequence: %S% + * Date newest applied delta was created (MM/DD/YY): %G% + * Time newest applied delta was created (HH:MM:SS): %U% + * SCCS file name %F% + * Fully qualified SCCS file name: + * %P% + * Copyright: + * (C) COPYRIGHT MOTOROLA, INC. 1996 + * ALL RIGHTS RESERVED + * Notes: + * History: + * Date Who + * + * 10/24/96 Rob Baxter + * Initial release. + * + */ + +#define VPD_EEPROM_SIZE 256 /* EEPROM size in bytes */ + +/* + * packet tuple identifiers + * + * 0x0D - 0xBF reserved + * 0xC0 - 0xFE user defined + */ +#define VPD_PID_GI 0x00 /* guaranteed illegal */ +#define VPD_PID_PID 0x01 /* product identifier (ASCII) */ +#define VPD_PID_FAN 0x02 /* factory assembly-number (ASCII) */ +#define VPD_PID_SN 0x03 /* serial-number (ASCII) */ +#define VPD_PID_PCO 0x04 /* product configuration options(binary) */ +#define VPD_PID_ICS 0x05 /* internal clock speed in HZ (integer) */ +#define VPD_PID_ECS 0x06 /* external clock speed in HZ (integer) */ +#define VPD_PID_RCS 0x07 /* reference clock speed in HZ(integer) */ +#define VPD_PID_EA 0x08 /* ethernet address (binary) */ +#define VPD_PID_MT 0x09 /* microprocessor type (ASCII) */ +#define VPD_PID_CRC 0x0A /* EEPROM CRC (integer) */ +#define VPD_PID_FMC 0x0B /* FLASH memory configuration (binary) */ +#define VPD_PID_VLSI 0x0C /* VLSI revisions/versions (binary) */ +#define VPD_PID_TERM 0xFF /* termination */ + +/* + * VPD structure (format) + */ +#define VPD_EYE_SIZE 8 /* eyecatcher size */ +typedef struct vpd_header +{ + uchar eyecatcher[VPD_EYE_SIZE]; /* eyecatcher - "MOTOROLA" */ + ushort size; /* size of EEPROM */ +} vpd_header_t; + +#define VPD_DATA_SIZE (VPD_EEPROM_SIZE-sizeof(vpd_header_t)) +typedef struct vpd +{ + vpd_header_t header; /* header */ + uchar packets[VPD_DATA_SIZE]; /* data */ +} vpd_t; + +/* + * packet tuple structure (format) + */ +typedef struct vpd_packet +{ + uchar identifier; /* identifier (PIDs above) */ + uchar size; /* size of the following data area */ + uchar data[1]; /* data (size is dependent upon PID) */ +} vpd_packet_t; + +/* + * MBX product configuration options bit definitions + * + * Notes: + * 1. The bit numbering is reversed in perspective with the C compiler. + */ +#define PCO_BBRAM (1<<0) /* battery-backed RAM (BBRAM) and socket */ +#define PCO_BOOTROM (1<<1) /* boot ROM and socket (i.e., socketed FLASH) */ +#define PCO_KAPWR (1<<2) /* keep alive power source (lithium battey) and control circuit */ +#define PCO_ENET_TP (1<<3) /* ethernet twisted pair (TP) connector (RJ45) */ +#define PCO_ENET_AUI (1<<4) /* ethernet attachment unit interface (AUI) header */ +#define PCO_PCMCIA (1<<5) /* PCMCIA socket */ +#define PCO_DIMM (1<<6) /* DIMM module socket */ +#define PCO_DTT (1<<7) /* digital thermometer and thermostat (DTT) device */ +#define PCO_LCD (1<<8) /* liquid crystal display (LCD) device */ +#define PCO_PCI (1<<9) /* PCI-Bus bridge device (QSpan) and ISA-Bus bridge device (Winbond) */ +#define PCO_PCIO (1<<10) /* PC I/O (COM1, COM2, FDC, LPT, Keyboard/Mouse) */ +#define PCO_EIDE (1<<11) /* enhanced IDE (EIDE) header */ +#define PCO_FDC (1<<12) /* floppy disk controller (FDC) header */ +#define PCO_LPT_8XX (1<<13) /* parallel port header via MPC8xx */ +#define PCO_LPT_PCIO (1<<14) /* parallel port header via PC I/O */ + +/* + * FLASH memory configuration packet data + */ +typedef struct vpd_fmc +{ + ushort mid; /* manufacturer's idenitfier */ + ushort did; /* manufacturer's device idenitfier */ + uchar ddw; /* device data width (e.g., 8-bits, 16-bits) */ + uchar nod; /* number of devices present */ + uchar noc; /* number of columns */ + uchar cw; /* column width in bits */ + uchar wedw; /* write/erase data width */ +} vpd_fmc_t; + +/* function prototypes */ +extern void vpd_init(void); +extern int vpd_read(uint iic_device, uchar *buf, int count, int offset); +extern vpd_packet_t *vpd_find_packet(u_char ident); + +#endif /* __vpd_h */ diff --git a/board/rpxsuper/u-boot.lds b/board/rpxsuper/u-boot.lds new file mode 100644 index 0000000000..1572aca480 --- /dev/null +++ b/board/rpxsuper/u-boot.lds @@ -0,0 +1,117 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc8260/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} + diff --git a/board/rsdproto/flash_asm.S b/board/rsdproto/flash_asm.S new file mode 100644 index 0000000000..c65fb87040 --- /dev/null +++ b/board/rsdproto/flash_asm.S @@ -0,0 +1,39 @@ +/* + * -*- mode:c -*- + * + * (C) Copyright 2000 + * Marius Groeger + * Sysgo Real-Time Solutions, GmbH + * + * void ull_write(unsigned long long volatile *address, + * unsigned long long volatile *data) + * r3 = address + * r4 = data + * + * void ull_read(unsigned long long volatile *address, + * unsigned long long volatile *data) + * r3 = address + * r4 = data + * + * Uses the floating point unit to read and write 64 bit wide + * data (unsigned long long) on the 60x bus. This is necessary + * because all 4 flash chips use the /WE line from byte lane 0 + * + * IMPORTANT: data should always be 8-aligned, otherwise an exception will + * occur. + */ + +#include +#include + +.globl ull_write +ull_write: + lfd 0,0(r4) + stfd 0,0(r3) + blr + + .globl ull_read +ull_read: + lfd 0, 0(r3) + stfd 0, 0(r4) + blr diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds new file mode 100644 index 0000000000..7425be6bb4 --- /dev/null +++ b/board/rsdproto/u-boot.lds @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc8260/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + /*. = env_offset; */ + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} + diff --git a/board/sandpoint/speed.h b/board/sandpoint/speed.h new file mode 100644 index 0000000000..b66393bec5 --- /dev/null +++ b/board/sandpoint/speed.h @@ -0,0 +1,54 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/*----------------------------------------------------------------------- + * Timer value for timer 2, ICLK = 10 + * + * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1)) + * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1 + * + * SPEED_FCOUNT2 timer 2 counting frequency + * GCLK CPU clock + * SPEED_TMR2_PS prescaler + */ +#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */ + +/*----------------------------------------------------------------------- + * Timer value for PIT + * + * PIT_TIME = SPEED_PITC / PITRTCLK + * PITRTCLK = 8192 + */ +#define SPEED_PITC (82 << 16) /* start counting from 82 */ + +/* + * The new value for PTA is calculated from + * + * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS) + * + * gclk CPU clock (not bus clock !) + * Trefresh Refresh cycle * 4 (four word bursts used) + * DFBRG For normal mode (no clock reduction) always 0 + * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh) + * NCS Number of SDRAM banks (chip selects) on this UPM. + */ diff --git a/board/sbc8260/u-boot.lds b/board/sbc8260/u-boot.lds new file mode 100644 index 0000000000..1572aca480 --- /dev/null +++ b/board/sbc8260/u-boot.lds @@ -0,0 +1,117 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc8260/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} + diff --git a/board/sixnet/Makefile b/board/sixnet/Makefile new file mode 100644 index 0000000000..ef173d0366 --- /dev/null +++ b/board/sixnet/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/sixnet/u-boot.lds b/board/sixnet/u-boot.lds new file mode 100644 index 0000000000..25a170bb22 --- /dev/null +++ b/board/sixnet/u-boot.lds @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc8xx/start.o (.text) + common/environment.o(.text) + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} + diff --git a/board/spd8xx/Makefile b/board/spd8xx/Makefile new file mode 100644 index 0000000000..ef173d0366 --- /dev/null +++ b/board/spd8xx/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds new file mode 100644 index 0000000000..27da78c284 --- /dev/null +++ b/board/spd8xx/u-boot.lds @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc8xx/start.o (.text) + common/environment.o(.text) + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} + diff --git a/cpu/mpc8260/speed.h b/cpu/mpc8260/speed.h new file mode 100644 index 0000000000..b66393bec5 --- /dev/null +++ b/cpu/mpc8260/speed.h @@ -0,0 +1,54 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/*----------------------------------------------------------------------- + * Timer value for timer 2, ICLK = 10 + * + * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1)) + * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1 + * + * SPEED_FCOUNT2 timer 2 counting frequency + * GCLK CPU clock + * SPEED_TMR2_PS prescaler + */ +#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */ + +/*----------------------------------------------------------------------- + * Timer value for PIT + * + * PIT_TIME = SPEED_PITC / PITRTCLK + * PITRTCLK = 8192 + */ +#define SPEED_PITC (82 << 16) /* start counting from 82 */ + +/* + * The new value for PTA is calculated from + * + * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS) + * + * gclk CPU clock (not bus clock !) + * Trefresh Refresh cycle * 4 (four word bursts used) + * DFBRG For normal mode (no clock reduction) always 0 + * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh) + * NCS Number of SDRAM banks (chip selects) on this UPM. + */ diff --git a/include/405_mal.h b/include/405_mal.h new file mode 100644 index 0000000000..459924b6be --- /dev/null +++ b/include/405_mal.h @@ -0,0 +1,106 @@ +/* include/mal.h, openbios_walnut, walnut_bios 8/6/99 08:48:40 */ +/*----------------------------------------------------------------------------+ +| +| This source code has been made available to you by IBM on an AS-IS +| basis. Anyone receiving this source is licensed under IBM +| copyrights to use it in any way he or she deems fit, including +| copying it, modifying it, compiling it, and redistributing it either +| with or without modifications. No license under IBM patents or +| patent applications is to be implied by the copyright license. +| +| Any user of this software should understand that IBM cannot provide +| technical support for this software and will not be responsible for +| any consequences resulting from the use of this software. +| +| Any person who transfers this source code or any derivative work +| must include the IBM copyright notice, this paragraph, and the +| preceding two paragraphs in the transferred software. +| +| COPYRIGHT I B M CORPORATION 1999 +| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M ++----------------------------------------------------------------------------*/ +/*----------------------------------------------------------------------------+ +| +| File Name: mal.h +| +| Function: Header file for the MAL (MADMAL) macro on the 405GP. +| +| Author: Mark Wisner +| +| Change Activity- +| +| Date Description of Change BY +| --------- --------------------- --- +| 29-Apr-99 Created MKW +| ++----------------------------------------------------------------------------*/ +#ifndef _mal_h_ +#define _mal_h_ +/* MADMAL transmit and receive status/control bits */ +/* for COMMAC bits, refer to the COMMAC header file */ + +#define MAL_TX_CTRL_READY 0x8000 +#define MAL_TX_CTRL_WRAP 0x4000 +#define MAL_TX_CTRL_CM 0x2000 +#define MAL_TX_CTRL_LAST 0x1000 +#define MAL_TX_CTRL_INTR 0x0400 + +#define MAL_RX_CTRL_EMPTY 0x8000 +#define MAL_RX_CTRL_WRAP 0x4000 +#define MAL_RX_CTRL_CM 0x2000 +#define MAL_RX_CTRL_LAST 0x1000 +#define MAL_RX_CTRL_FIRST 0x0800 +#define MAL_RX_CTRL_INTR 0x0400 + + /* Configuration Reg */ +#define MAL_CR_MMSR 0x80000000 +#define MAL_CR_PLBP_1 0x00400000 /* lowsest is 00 */ +#define MAL_CR_PLBP_2 0x00800000 +#define MAL_CR_PLBP_3 0x00C00000 /* highest */ +#define MAL_CR_GA 0x00200000 +#define MAL_CR_OA 0x00100000 +#define MAL_CR_PLBLE 0x00080000 +#define MAL_CR_PLBLT_1 0x00040000 +#define MAL_CR_PLBLT_2 0x00020000 +#define MAL_CR_PLBLT_3 0x00010000 +#define MAL_CR_PLBLT_4 0x00008000 +#define MAL_CR_PLBLT_DEFAULT 0x00078000 /* ????? */ +#define MAL_CR_PLBB 0x00004000 +#define MAL_CR_OPBBL 0x00000080 +#define MAL_CR_EOPIE 0x00000004 +#define MAL_CR_LEA 0x00000002 +#define MAL_CR_MSD 0x00000001 + + /* Error Status Reg */ +#define MAL_ESR_EVB 0x80000000 +#define MAL_ESR_CID 0x40000000 +#define MAL_ESR_DE 0x00100000 +#define MAL_ESR_ONE 0x00080000 +#define MAL_ESR_OTE 0x00040000 +#define MAL_ESR_OSE 0x00020000 +#define MAL_ESR_PEIN 0x00010000 + /* same bit position as the IER */ + /* VV VV */ +#define MAL_ESR_DEI 0x00000010 +#define MAL_ESR_ONEI 0x00000008 +#define MAL_ESR_OTEI 0x00000004 +#define MAL_ESR_OSEI 0x00000002 +#define MAL_ESR_PBEI 0x00000001 + /* ^^ ^^ */ + /* Mal IER */ +#define MAL_IER_DE 0x00000010 +#define MAL_IER_NE 0x00000008 +#define MAL_IER_TE 0x00000004 +#define MAL_IER_OPBE 0x00000002 +#define MAL_IER_PLBE 0x00000001 + + +/* MAL Buffer Descriptor structure */ +typedef struct { + short ctrl; /* MAL / Commac status control bits */ + short data_len; /* Max length is 4K-1 (12 bits) */ + char *data_ptr; /* pointer to actual data buffer */ +} mal_desc_t; + +#endif + diff --git a/include/asm-ppc/atomic.h b/include/asm-ppc/atomic.h new file mode 100644 index 0000000000..23f22df1b7 --- /dev/null +++ b/include/asm-ppc/atomic.h @@ -0,0 +1,95 @@ +/* + * PowerPC atomic operations + */ + +#ifndef _ASM_PPC_ATOMIC_H_ +#define _ASM_PPC_ATOMIC_H_ + +#include + +#ifdef CONFIG_SMP +typedef struct { volatile int counter; } atomic_t; +#else +typedef struct { int counter; } atomic_t; +#endif + +#define ATOMIC_INIT(i) { (i) } + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v,i) (((v)->counter) = (i)) + +extern void atomic_clear_mask(unsigned long mask, unsigned long *addr); +extern void atomic_set_mask(unsigned long mask, unsigned long *addr); + +extern __inline__ int atomic_add_return(int a, atomic_t *v) +{ + int t; + + __asm__ __volatile__("\n\ +1: lwarx %0,0,%3\n\ + add %0,%2,%0\n\ + stwcx. %0,0,%3\n\ + bne- 1b" + : "=&r" (t), "=m" (*v) + : "r" (a), "r" (v), "m" (*v) + : "cc"); + + return t; +} + +extern __inline__ int atomic_sub_return(int a, atomic_t *v) +{ + int t; + + __asm__ __volatile__("\n\ +1: lwarx %0,0,%3\n\ + subf %0,%2,%0\n\ + stwcx. %0,0,%3\n\ + bne- 1b" + : "=&r" (t), "=m" (*v) + : "r" (a), "r" (v), "m" (*v) + : "cc"); + + return t; +} + +extern __inline__ int atomic_inc_return(atomic_t *v) +{ + int t; + + __asm__ __volatile__("\n\ +1: lwarx %0,0,%2\n\ + addic %0,%0,1\n\ + stwcx. %0,0,%2\n\ + bne- 1b" + : "=&r" (t), "=m" (*v) + : "r" (v), "m" (*v) + : "cc"); + + return t; +} + +extern __inline__ int atomic_dec_return(atomic_t *v) +{ + int t; + + __asm__ __volatile__("\n\ +1: lwarx %0,0,%2\n\ + addic %0,%0,-1\n\ + stwcx. %0,0,%2\n\ + bne 1b" + : "=&r" (t), "=m" (*v) + : "r" (v), "m" (*v) + : "cc"); + + return t; +} + +#define atomic_add(a, v) ((void) atomic_add_return((a), (v))) +#define atomic_sub(a, v) ((void) atomic_sub_return((a), (v))) +#define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0) +#define atomic_inc(v) ((void) atomic_inc_return((v))) +#define atomic_dec(v) ((void) atomic_dec_return((v))) +#define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0) + +#endif /* _ASM_PPC_ATOMIC_H_ */ diff --git a/include/asm-ppc/posix_types.h b/include/asm-ppc/posix_types.h new file mode 100644 index 0000000000..9170728117 --- /dev/null +++ b/include/asm-ppc/posix_types.h @@ -0,0 +1,109 @@ +#ifndef _PPC_POSIX_TYPES_H +#define _PPC_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned int __kernel_dev_t; +typedef unsigned int __kernel_ino_t; +typedef unsigned int __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef long __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned int __kernel_old_uid_t; +typedef unsigned int __kernel_old_gid_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#ifndef __GNUC__ + +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) +#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) +#define __FD_ZERO(set) \ + ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set))) + +#else /* __GNUC__ */ + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \ + || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0) +/* With GNU C, use inline functions instead so args are evaluated only once: */ + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] |= (1UL<<_rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); +} + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *p) +{ + unsigned int *tmp = (unsigned int *)p->fds_bits; + int i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 8: + tmp[0] = 0; tmp[1] = 0; tmp[2] = 0; tmp[3] = 0; + tmp[4] = 0; tmp[5] = 0; tmp[6] = 0; tmp[7] = 0; + return; + } + } + i = __FDSET_LONGS; + while (i) { + i--; + *tmp = 0; + tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ +#endif /* __GNUC__ */ +#endif /* _PPC_POSIX_TYPES_H */ diff --git a/include/asm-ppc/signal.h b/include/asm-ppc/signal.h new file mode 100644 index 0000000000..b11a28efd1 --- /dev/null +++ b/include/asm-ppc/signal.h @@ -0,0 +1,154 @@ +#ifndef _ASMPPC_SIGNAL_H +#define _ASMPPC_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX (_NSIG-1) + +/* + * SA_FLAGS values: + * + * SA_ONSTACK is not currently supported, but will allow sigaltstack(2). + * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND +#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */ + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 +#ifdef __KERNEL__ + +/* + * These values of sa_flags are used only by the kernel as part of the + * irq handling routines. + * + * SA_INTERRUPT is also used by the irq handling routines. + * SA_SHIRQ is for shared interrupt support on PCI and EISA. + */ +#define SA_PROBE SA_ONESHOT +#define SA_SAMPLE_RANDOM SA_RESTART +#define SA_SHIRQ 0x04000000 +#endif + +#define SIG_BLOCK 0 /* for blocking signals */ +#define SIG_UNBLOCK 1 /* for unblocking signals */ +#define SIG_SETMASK 2 /* for setting the signal mask */ + +/* Type of a signal handler. */ +typedef void (*__sighandler_t)(int); + +#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ +#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ +#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ + +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include + +#endif + +#endif diff --git a/include/linux/posix_types.h b/include/linux/posix_types.h new file mode 100644 index 0000000000..bd37e1faf4 --- /dev/null +++ b/include/linux/posix_types.h @@ -0,0 +1,48 @@ +#ifndef _LINUX_POSIX_TYPES_H +#define _LINUX_POSIX_TYPES_H + +#include + +/* + * This allows for 1024 file descriptors: if NR_OPEN is ever grown + * beyond that you'll have to change this too. But 1024 fd's seem to be + * enough even for such "real" unices like OSF/1, so hopefully this is + * one limit that doesn't have to be changed [again]. + * + * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in + * (and thus ) - but this is a more logical + * place for them. Solved by having dummy defines in . + */ + +/* + * Those macros may have been defined in . But we always + * use the ones here. + */ +#undef __NFDBITS +#define __NFDBITS (8 * sizeof(unsigned long)) + +#undef __FD_SETSIZE +#define __FD_SETSIZE 1024 + +#undef __FDSET_LONGS +#define __FDSET_LONGS (__FD_SETSIZE/__NFDBITS) + +#undef __FDELT +#define __FDELT(d) ((d) / __NFDBITS) + +#undef __FDMASK +#define __FDMASK(d) (1UL << ((d) % __NFDBITS)) + +typedef struct { + unsigned long fds_bits [__FDSET_LONGS]; +} __kernel_fd_set; + +/* Type of a signal handler. */ +typedef void (*__kernel_sighandler_t)(int); + +/* Type of a SYSV IPC key. */ +typedef int __kernel_key_t; + +#include + +#endif /* _LINUX_POSIX_TYPES_H */ diff --git a/include/mpc8xx_irq.h b/include/mpc8xx_irq.h new file mode 100644 index 0000000000..d2a81c00dc --- /dev/null +++ b/include/mpc8xx_irq.h @@ -0,0 +1,59 @@ +#ifndef _MPC8XX_IRQ_H +#define _MPC8XX_IRQ_H + +/* The MPC8xx cores have 16 possible interrupts. There are eight + * possible level sensitive interrupts assigned and generated internally + * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer. + * There are eight external interrupts (IRQs) that can be configured + * as either level or edge sensitive. + * + * On some implementations, there is also the possibility of an 8259 + * through the PCI and PCI-ISA bridges. + * + * We don't support the 8259 (yet). + */ +#define NR_SIU_INTS 16 +#define NR_8259_INTS 0 + +#define NR_IRQS (NR_SIU_INTS + NR_8259_INTS) + +/* These values must be zero-based and map 1:1 with the SIU configuration. + * They are used throughout the 8xx I/O subsystem to generate + * interrupt masks, flags, and other control patterns. This is why the + * current kernel assumption of the 8259 as the base controller is such + * a pain in the butt. + */ +#define SIU_IRQ0 (0) /* Highest priority */ +#define SIU_LEVEL0 (1) +#define SIU_IRQ1 (2) +#define SIU_LEVEL1 (3) +#define SIU_IRQ2 (4) +#define SIU_LEVEL2 (5) +#define SIU_IRQ3 (6) +#define SIU_LEVEL3 (7) +#define SIU_IRQ4 (8) +#define SIU_LEVEL4 (9) +#define SIU_IRQ5 (10) +#define SIU_LEVEL5 (11) +#define SIU_IRQ6 (12) +#define SIU_LEVEL6 (13) +#define SIU_IRQ7 (14) +#define SIU_LEVEL7 (15) + +/* The internal interrupts we can configure as we see fit. + * My personal preference is CPM at level 2, which puts it above the + * MBX PCI/ISA/IDE interrupts. + */ + +#ifdef CFG_CPM_INTERRUPT +# define CPM_INTERRUPT CFG_CPM_INTERRUPT +#else +# define CPM_INTERRUPT SIU_LEVEL2 +#endif + +/* Some internal interrupt registers use an 8-bit mask for the interrupt + * level instead of a number. + */ +#define mk_int_int_mask(IL) (1 << (7 - (IL/2))) + +#endif /* _MPC8XX_IRQ_H */ diff --git a/include/s_record.h b/include/s_record.h new file mode 100644 index 0000000000..07806d5cd8 --- /dev/null +++ b/include/s_record.h @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/*-------------------------------------------------------------------------- + * + * Motorola S-Record Format: + * + * Motorola S-Records are an industry-standard format for + * transmitting binary files to target systems and PROM + * programmers. LSI Logic have extended this standard to include + * an S4-record containing an address and a symbol. + * + * The extended S-record standard is as follows: + * + * S
+ * S4
, + * + * Where: + * + * type + * is the record type. Where: + * + * 0 starting record (optional) + * 1 data record with 16-bit address + * 2 data record with 24-bit address + * 3 data record with 32-bit address + * 4 symbol record (LSI extension) + * 5 number of data records in preceeding block + * 6 unused + * 7 ending record for S3 records + * 8 ending record for S2 records + * 9 ending record for S1 records + * + * length + * is two hex characters. This defines the length of the + * record in bytes (not characters). It includes the address + * field, the data field, and the checksum field. + * + * address + * is 4, 6, or 8 characters. Corresponding to a 16-, 24-, or + * 32-bit address. The address field for S4 records is + * always 32 bits. + * + * data + * + * Are the data bytes. Each pair of hex characters represent + * one byte in memory. + * + * name + * Is the symbol name. The symbol is terminated by a ','. + * + * checksum + * Is the one's complement of the 8-bit checksum. + * + * Example + * + * S0030000FC + * . + * . + * S325000004403C0880018D08DD900000000011000026000000003C0880012508DC50C50000B401 + * S32500000460C50100B8C50200BCC50300C0C50400C4C50500C8C50600CCC50700D0C50800D4FA + * S32500000480C50900D8C50A00DCC50B00E0C50C00E4C50D00E8C50E00ECC50F00F0C51000F49A + * S325000004A0C51100F8C51200FCC5130100C5140104C5150108C516010CC5170110C518011434 + * . + * . + * S70500000000FA + * + * The S0 record starts the file. The S3 records contain the + * data. The S7 record contains the entry address and terminates + * the download. + * + *-------------------------------------------------------------------------- + */ + +#define SREC_START 0 /* Start Record (module name) */ +#define SREC_DATA2 1 /* Data Record with 2 byte address */ +#define SREC_DATA3 2 /* Data Record with 3 byte address */ +#define SREC_DATA4 3 /* Data Record with 4 byte address */ +#define SREC_COUNT 5 /* Count Record (previously transmitted) */ +#define SREC_END4 7 /* End Record with 4 byte start address */ +#define SREC_END3 8 /* End Record with 3 byte start address */ +#define SREC_END2 9 /* End Record with 2 byte start address */ +#define SREC_EMPTY 10 /* Empty Record without any data */ + +#define SREC_REC_OK SREC_EMPTY /* last code without error condition */ + +#define SREC_E_BADTYPE -1 /* no valid S-Record */ +#define SREC_E_NOSREC -2 /* line format differs from s-record */ +#define SREC_E_BADCHKS -3 /* checksum error in an s-record line */ + +#define SREC_MAXRECLEN (512 + 4) /* max ASCII record length */ +#define SREC_MAXBINLEN 255 /* resulting binary length */ + +int srec_decode (char *input, int *count, ulong *addr, char *data); diff --git a/include/zlib.h b/include/zlib.h new file mode 100644 index 0000000000..6958ab8e77 --- /dev/null +++ b/include/zlib.h @@ -0,0 +1,434 @@ +/* + * This file is derived from zlib.h and zconf.h from the zlib-0.95 + * distribution by Jean-loup Gailly and Mark Adler, with some additions + * by Paul Mackerras to aid in implementing Deflate compression and + * decompression for PPP packets. + */ + +/* + * ==FILEVERSION 960122== + * + * This marker is used by the Linux installation script to determine + * whether an up-to-date version of this file is already installed. + */ + +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 0.95, Aug 16th, 1995. + + Copyright (C) 1995 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + gzip@prep.ai.mit.edu madler@alumni.caltech.edu + */ + +#ifndef _ZLIB_H +#define _ZLIB_H + +/* #include "zconf.h" */ /* included directly here */ + +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */ + +/* + The library does not install any signal handler. It is recommended to + add at least a handler for SIGSEGV when decompressing; the library checks + the consistency of the input data whenever possible but may go nuts + for some forms of corrupted input. + */ + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints + * at addresses which are not a multiple of their size. + * Under DOS, -DFAR=far or -DFAR=__far may be needed. + */ + +#ifndef STDC +# if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus) +# define STDC +# endif +#endif + +#ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */ +# include +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +#ifndef FAR +# define FAR +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2 */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + 1 << (windowBits+2) + 1 << (memLevel+9) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +typedef unsigned char Byte; /* 8 bits */ +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +typedef Byte FAR Bytef; +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +/* end of original zconf.h */ + +#define ZLIB_VERSION "0.95P" + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms may be added later and will have the same + stream interface. + + For compression the application must provide the output buffer and + may optionally provide the input buffer for optimization. For decompression, + the application must provide the input buffer and may optionally provide + the output buffer for optimization. + + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes)); + +typedef void (*cb_func) OF((Bytef *buf, uInt len)); + +struct internal_state; + +typedef struct z_stream_s { + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + + char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidp opaque; /* private data object passed to zalloc and zfree */ + + Byte data_type; /* best guess about the data type: ascii or binary */ + + cb_func outcb; /* called regularly just before blocks of output */ + +} z_stream; + +/* + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 +#define Z_FULL_FLUSH 2 +#define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */ +#define Z_FINISH 4 +#define Z_PACKET_FLUSH 5 +/* See deflate() below for the usage of these constants */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +/* error codes for the compression/decompression functions */ + +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_DEFAULT_STRATEGY 0 + +#define Z_BINARY 0 +#define Z_ASCII 1 +#define Z_UNKNOWN 2 +/* Used to set the data_type field */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +extern char *zlib_version; +/* The application can compare zlib_version and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + */ + + /* basic functions */ + +extern int inflateInit OF((z_stream *strm)); +/* + Initializes the internal stream state for decompression. The fields + zalloc and zfree must be initialized before by the caller. If zalloc and + zfree are set to Z_NULL, inflateInit updates them to use default allocation + functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory. msg is set to null if there is no error message. + inflateInit does not perform any decompression: this will be done by + inflate(). +*/ + + +extern int inflate OF((z_stream *strm, int flush)); +/* + Performs one or both of the following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() always provides as much output as possible + (until there is no more input data or no more space in the output buffer). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). + + If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH, + inflate flushes as much output as possible to the output buffer. The + flushing behavior of inflate is not specified for values of the flush + parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the + current implementation actually flushes as much output as possible + anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data + has been consumed, it is expecting to see the length field of a stored + block; if not, it returns Z_DATA_ERROR. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster routine + may be used for the single inflate() call. + + inflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if the end of the + compressed data has been reached and all uncompressed output has been + produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if + the stream structure was inconsistent (for example if next_in or next_out + was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no + progress is possible or if there was not enough room in the output buffer + when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then + call inflateSync to look for a good compression block. */ + + +extern int inflateEnd OF((z_stream *strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + /* advanced functions */ + +extern int inflateInit2 OF((z_stream *strm, + int windowBits)); +/* + This is another version of inflateInit with more compression options. The + fields next_out, zalloc and zfree must be initialized before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library (the value 16 will be allowed soon). The + default value is 15 if inflateInit is used instead. If a compressed stream + with a larger window size is given as input, inflate() will return with + the error code Z_DATA_ERROR instead of trying to allocate a larger window. + + If next_out is not null, the library will use this buffer for the history + buffer; the buffer must either be large enough to hold the entire output + data, or have at least 1<= 0, but REM < 0, we got the wrong answer. In that + case, to get the right answer, add 1 to QUOT and subtract + DENOM from REM. */ + + if (numer >= 0 && result.rem < 0) + { + ++result.quot; + result.rem -= denom; + } + + return result; +} diff --git a/lib_generic/zlib.c b/lib_generic/zlib.c new file mode 100644 index 0000000000..3b7ab25e54 --- /dev/null +++ b/lib_generic/zlib.c @@ -0,0 +1,2161 @@ +/* + * This file is derived from various .h and .c files from the zlib-0.95 + * distribution by Jean-loup Gailly and Mark Adler, with some additions + * by Paul Mackerras to aid in implementing Deflate compression and + * decompression for PPP packets. See zlib.h for conditions of + * distribution and use. + * + * Changes that have been made include: + * - changed functions not used outside this file to "local" + * - added minCompression parameter to deflateInit2 + * - added Z_PACKET_FLUSH (see zlib.h for details) + * - added inflateIncomp + */ + +/*+++++*/ +/* zutil.h -- internal interface and configuration of the compression library + * Copyright (C) 1995 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */ + +#define _Z_UTIL_H + +#include "zlib.h" + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +#define FAR + +typedef unsigned char uch; +typedef uch FAR uchf; +typedef unsigned short ush; +typedef ush FAR ushf; +typedef unsigned long ulg; + +extern char *z_errmsg[]; /* indexed by 1-zlib_error */ + +#define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err) +/* To be used only when the state is known to be valid */ + +#ifndef NULL +#define NULL ((void *) 0) +#endif + + /* common constants */ + +#define DEFLATED 8 + +#ifndef DEF_WBITS +# define DEF_WBITS MAX_WBITS +#endif +/* default windowBits for decompression. MAX_WBITS is for compression only */ + +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +/* default memLevel */ + +#define STORED_BLOCK 0 +#define STATIC_TREES 1 +#define DYN_TREES 2 +/* The three kinds of block type */ + +#define MIN_MATCH 3 +#define MAX_MATCH 258 +/* The minimum and maximum match lengths */ + + /* functions */ + +#include +#define zmemcpy memcpy +#define zmemzero(dest, len) memset(dest, 0, len) + +/* Diagnostic functions */ +#ifdef DEBUG_ZLIB +# include +# ifndef verbose +# define verbose 0 +# endif +# define Assert(cond,msg) {if(!(cond)) z_error(msg);} +# define Trace(x) fprintf x +# define Tracev(x) {if (verbose) fprintf x ;} +# define Tracevv(x) {if (verbose>1) fprintf x ;} +# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} +# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + + +typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len)); + +/* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */ +/* void zcfree OF((voidpf opaque, voidpf ptr)); */ + +#define ZALLOC(strm, items, size) \ + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr, size) \ + (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size)) +#define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);} + +/* deflate.h -- internal compression state + * Copyright (C) 1995 Jean-loup Gailly + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/*+++++*/ +/* infblock.h -- header to use infblock.c + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +struct inflate_blocks_state; +typedef struct inflate_blocks_state FAR inflate_blocks_statef; + +local inflate_blocks_statef * inflate_blocks_new OF(( + z_stream *z, + check_func c, /* check function */ + uInt w)); /* window size */ + +local int inflate_blocks OF(( + inflate_blocks_statef *, + z_stream *, + int)); /* initial return code */ + +local void inflate_blocks_reset OF(( + inflate_blocks_statef *, + z_stream *, + uLongf *)); /* check value on output */ + +local int inflate_blocks_free OF(( + inflate_blocks_statef *, + z_stream *, + uLongf *)); /* check value on output */ + +local int inflate_addhistory OF(( + inflate_blocks_statef *, + z_stream *)); + +local int inflate_packet_flush OF(( + inflate_blocks_statef *)); + +/*+++++*/ +/* inftrees.h -- header to use inftrees.c + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Huffman code lookup table entry--this entry is four bytes for machines + that have 16-bit pointers (e.g. PC's in the small or medium model). */ + +typedef struct inflate_huft_s FAR inflate_huft; + +struct inflate_huft_s { + union { + struct { + Byte Exop; /* number of extra bits or operation */ + Byte Bits; /* number of bits in this code or subcode */ + } what; + uInt Nalloc; /* number of these allocated here */ + Bytef *pad; /* pad structure to a power of 2 (4 bytes for */ + } word; /* 16-bit, 8 bytes for 32-bit machines) */ + union { + uInt Base; /* literal, length base, or distance base */ + inflate_huft *Next; /* pointer to next level of table */ + } more; +}; + +#ifdef DEBUG_ZLIB + local uInt inflate_hufts; +#endif + +local int inflate_trees_bits OF(( + uIntf *, /* 19 code lengths */ + uIntf *, /* bits tree desired/actual depth */ + inflate_huft * FAR *, /* bits tree result */ + z_stream *)); /* for zalloc, zfree functions */ + +local int inflate_trees_dynamic OF(( + uInt, /* number of literal/length codes */ + uInt, /* number of distance codes */ + uIntf *, /* that many (total) code lengths */ + uIntf *, /* literal desired/actual bit depth */ + uIntf *, /* distance desired/actual bit depth */ + inflate_huft * FAR *, /* literal/length tree result */ + inflate_huft * FAR *, /* distance tree result */ + z_stream *)); /* for zalloc, zfree functions */ + +local int inflate_trees_fixed OF(( + uIntf *, /* literal desired/actual bit depth */ + uIntf *, /* distance desired/actual bit depth */ + inflate_huft * FAR *, /* literal/length tree result */ + inflate_huft * FAR *)); /* distance tree result */ + +local int inflate_trees_free OF(( + inflate_huft *, /* tables to free */ + z_stream *)); /* for zfree function */ + + +/*+++++*/ +/* infcodes.h -- header to use infcodes.c + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +struct inflate_codes_state; +typedef struct inflate_codes_state FAR inflate_codes_statef; + +local inflate_codes_statef *inflate_codes_new OF(( + uInt, uInt, + inflate_huft *, inflate_huft *, + z_stream *)); + +local int inflate_codes OF(( + inflate_blocks_statef *, + z_stream *, + int)); + +local void inflate_codes_free OF(( + inflate_codes_statef *, + z_stream *)); + + +/*+++++*/ +/* inflate.c -- zlib interface to inflate modules + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* inflate private state */ +struct internal_state { + + /* mode */ + enum { + METHOD, /* waiting for method byte */ + FLAG, /* waiting for flag byte */ + BLOCKS, /* decompressing blocks */ + CHECK4, /* four check bytes to go */ + CHECK3, /* three check bytes to go */ + CHECK2, /* two check bytes to go */ + CHECK1, /* one check byte to go */ + DONE, /* finished check, done */ + BAD} /* got an error--stay here */ + mode; /* current inflate mode */ + + /* mode dependent information */ + union { + uInt method; /* if FLAGS, method byte */ + struct { + uLong was; /* computed check value */ + uLong need; /* stream check value */ + } check; /* if CHECK, check values to compare */ + uInt marker; /* if BAD, inflateSync's marker bytes count */ + } sub; /* submode */ + + /* mode independent information */ + int nowrap; /* flag for no wrapper */ + uInt wbits; /* log2(window size) (8..15, defaults to 15) */ + inflate_blocks_statef + *blocks; /* current inflate_blocks state */ + +}; + + +int inflateReset(z) +z_stream *z; +{ + uLong c; + + if (z == Z_NULL || z->state == Z_NULL) + return Z_STREAM_ERROR; + z->total_in = z->total_out = 0; + z->msg = Z_NULL; + z->state->mode = z->state->nowrap ? BLOCKS : METHOD; + inflate_blocks_reset(z->state->blocks, z, &c); + Trace((stderr, "inflate: reset\n")); + return Z_OK; +} + + +int inflateEnd(z) +z_stream *z; +{ + uLong c; + + if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) + return Z_STREAM_ERROR; + if (z->state->blocks != Z_NULL) + inflate_blocks_free(z->state->blocks, z, &c); + ZFREE(z, z->state, sizeof(struct internal_state)); + z->state = Z_NULL; + Trace((stderr, "inflate: end\n")); + return Z_OK; +} + + +int inflateInit2(z, w) +z_stream *z; +int w; +{ + /* initialize state */ + if (z == Z_NULL) + return Z_STREAM_ERROR; +/* if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */ +/* if (z->zfree == Z_NULL) z->zfree = zcfree; */ + if ((z->state = (struct internal_state FAR *) + ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) + return Z_MEM_ERROR; + z->state->blocks = Z_NULL; + + /* handle undocumented nowrap option (no zlib header or check) */ + z->state->nowrap = 0; + if (w < 0) + { + w = - w; + z->state->nowrap = 1; + } + + /* set window size */ + if (w < 8 || w > 15) + { + inflateEnd(z); + return Z_STREAM_ERROR; + } + z->state->wbits = (uInt)w; + + /* create inflate_blocks state */ + if ((z->state->blocks = + inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w)) + == Z_NULL) + { + inflateEnd(z); + return Z_MEM_ERROR; + } + Trace((stderr, "inflate: allocated\n")); + + /* reset state */ + inflateReset(z); + return Z_OK; +} + + +int inflateInit(z) +z_stream *z; +{ + return inflateInit2(z, DEF_WBITS); +} + + +#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;} +#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) + +int inflate(z, f) +z_stream *z; +int f; +{ + int r; + uInt b; + + if (z == Z_NULL || z->next_in == Z_NULL) + return Z_STREAM_ERROR; + r = Z_BUF_ERROR; + while (1) switch (z->state->mode) + { + case METHOD: + NEEDBYTE + if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED) + { + z->state->mode = BAD; + z->msg = "unknown compression method"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + if ((z->state->sub.method >> 4) + 8 > z->state->wbits) + { + z->state->mode = BAD; + z->msg = "invalid window size"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + z->state->mode = FLAG; + case FLAG: + NEEDBYTE + if ((b = NEXTBYTE) & 0x20) + { + z->state->mode = BAD; + z->msg = "invalid reserved bit"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + if (((z->state->sub.method << 8) + b) % 31) + { + z->state->mode = BAD; + z->msg = "incorrect header check"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + Trace((stderr, "inflate: zlib header ok\n")); + z->state->mode = BLOCKS; + case BLOCKS: + r = inflate_blocks(z->state->blocks, z, r); + if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0) + r = inflate_packet_flush(z->state->blocks); + if (r == Z_DATA_ERROR) + { + z->state->mode = BAD; + z->state->sub.marker = 0; /* can try inflateSync */ + break; + } + if (r != Z_STREAM_END) + return r; + r = Z_OK; + inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); + if (z->state->nowrap) + { + z->state->mode = DONE; + break; + } + z->state->mode = CHECK4; + case CHECK4: + NEEDBYTE + z->state->sub.check.need = (uLong)NEXTBYTE << 24; + z->state->mode = CHECK3; + case CHECK3: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE << 16; + z->state->mode = CHECK2; + case CHECK2: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE << 8; + z->state->mode = CHECK1; + case CHECK1: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE; + + if (z->state->sub.check.was != z->state->sub.check.need) + { + z->state->mode = BAD; + z->msg = "incorrect data check"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + Trace((stderr, "inflate: zlib check ok\n")); + z->state->mode = DONE; + case DONE: + return Z_STREAM_END; + case BAD: + return Z_DATA_ERROR; + default: + return Z_STREAM_ERROR; + } + + empty: + if (f != Z_PACKET_FLUSH) + return r; + z->state->mode = BAD; + z->state->sub.marker = 0; /* can try inflateSync */ + return Z_DATA_ERROR; +} + +/* + * This subroutine adds the data at next_in/avail_in to the output history + * without performing any output. The output buffer must be "caught up"; + * i.e. no pending output (hence s->read equals s->write), and the state must + * be BLOCKS (i.e. we should be willing to see the start of a series of + * BLOCKS). On exit, the output will also be caught up, and the checksum + * will have been updated if need be. + */ + +int inflateIncomp(z) +z_stream *z; +{ + if (z->state->mode != BLOCKS) + return Z_DATA_ERROR; + return inflate_addhistory(z->state->blocks, z); +} + + +int inflateSync(z) +z_stream *z; +{ + uInt n; /* number of bytes to look at */ + Bytef *p; /* pointer to bytes */ + uInt m; /* number of marker bytes found in a row */ + uLong r, w; /* temporaries to save total_in and total_out */ + + /* set up */ + if (z == Z_NULL || z->state == Z_NULL) + return Z_STREAM_ERROR; + if (z->state->mode != BAD) + { + z->state->mode = BAD; + z->state->sub.marker = 0; + } + if ((n = z->avail_in) == 0) + return Z_BUF_ERROR; + p = z->next_in; + m = z->state->sub.marker; + + /* search */ + while (n && m < 4) + { + if (*p == (Byte)(m < 2 ? 0 : 0xff)) + m++; + else if (*p) + m = 0; + else + m = 4 - m; + p++, n--; + } + + /* restore */ + z->total_in += p - z->next_in; + z->next_in = p; + z->avail_in = n; + z->state->sub.marker = m; + + /* return no joy or set up to restart on a new block */ + if (m != 4) + return Z_DATA_ERROR; + r = z->total_in; w = z->total_out; + inflateReset(z); + z->total_in = r; z->total_out = w; + z->state->mode = BLOCKS; + return Z_OK; +} + +#undef NEEDBYTE +#undef NEXTBYTE + +/*+++++*/ +/* infutil.h -- types and macros common to blocks and codes + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* inflate blocks semi-private state */ +struct inflate_blocks_state { + + /* mode */ + enum { + TYPE, /* get type bits (3, including end bit) */ + LENS, /* get lengths for stored */ + STORED, /* processing stored block */ + TABLE, /* get table lengths */ + BTREE, /* get bit lengths tree for a dynamic block */ + DTREE, /* get length, distance trees for a dynamic block */ + CODES, /* processing fixed or dynamic block */ + DRY, /* output remaining window bytes */ + DONEB, /* finished last block, done */ + BADB} /* got a data error--stuck here */ + mode; /* current inflate_block mode */ + + /* mode dependent information */ + union { + uInt left; /* if STORED, bytes left to copy */ + struct { + uInt table; /* table lengths (14 bits) */ + uInt index; /* index into blens (or border) */ + uIntf *blens; /* bit lengths of codes */ + uInt bb; /* bit length tree depth */ + inflate_huft *tb; /* bit length decoding tree */ + int nblens; /* # elements allocated at blens */ + } trees; /* if DTREE, decoding info for trees */ + struct { + inflate_huft *tl, *td; /* trees to free */ + inflate_codes_statef + *codes; + } decode; /* if CODES, current state */ + } sub; /* submode */ + uInt last; /* true if this block is the last block */ + + /* mode independent information */ + uInt bitk; /* bits in bit buffer */ + uLong bitb; /* bit buffer */ + Bytef *window; /* sliding window */ + Bytef *end; /* one byte after sliding window */ + Bytef *read; /* window read pointer */ + Bytef *write; /* window write pointer */ + check_func checkfn; /* check function */ + uLong check; /* check on output */ + +}; + + +/* defines for inflate input/output */ +/* update pointers and return */ +#define UPDBITS {s->bitb=b;s->bitk=k;} +#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} +#define UPDOUT {s->write=q;} +#define UPDATE {UPDBITS UPDIN UPDOUT} +#define LEAVE {UPDATE return inflate_flush(s,z,r);} +/* get bytes and bits */ +#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} +#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} +#define NEXTBYTE (n--,*p++) +#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<>=(j);k-=(j);} +/* output bytes */ +#define WAVAIL (qread?s->read-q-1:s->end-q) +#define LOADOUT {q=s->write;m=WAVAIL;} +#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}} +#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} +#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} +#define OUTBYTE(a) {*q++=(Byte)(a);m--;} +/* load local pointers */ +#define LOAD {LOADIN LOADOUT} + +/* + * The IBM 150 firmware munges the data right after _etext[]. This + * protects it. -- Cort + */ +#if 0 +local uInt protect_mask[] = {0, 0, 0, 0, 0, 0, 0, 0, 0 ,0 ,0 ,0}; +#endif +/* And'ing with mask[n] masks the lower n bits */ +local uInt inflate_mask[] = { + 0x0000, + 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, + 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff +}; + +/* copy as much as possible from the sliding window to the output area */ +local int inflate_flush OF(( + inflate_blocks_statef *, + z_stream *, + int)); + +/*+++++*/ +/* inffast.h -- header to use inffast.c + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +local int inflate_fast OF(( + uInt, + uInt, + inflate_huft *, + inflate_huft *, + inflate_blocks_statef *, + z_stream *)); + + +/*+++++*/ +/* infblock.c -- interpret and process block types to last block + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* Table for deflate from PKZIP's appnote.txt. */ +local uInt border[] = { /* Order of the bit length code lengths */ + 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + +/* + Notes beyond the 1.93a appnote.txt: + + 1. Distance pointers never point before the beginning of the output + stream. + 2. Distance pointers can point back across blocks, up to 32k away. + 3. There is an implied maximum of 7 bits for the bit length table and + 15 bits for the actual data. + 4. If only one code exists, then it is encoded using one bit. (Zero + would be more efficient, but perhaps a little confusing.) If two + codes exist, they are coded using one bit each (0 and 1). + 5. There is no way of sending zero distance codes--a dummy must be + sent if there are none. (History: a pre 2.0 version of PKZIP would + store blocks with no distance codes, but this was discovered to be + too harsh a criterion.) Valid only for 1.93a. 2.04c does allow + zero distance codes, which is sent as one code of zero bits in + length. + 6. There are up to 286 literal/length codes. Code 256 represents the + end-of-block. Note however that the static length tree defines + 288 codes just to fill out the Huffman codes. Codes 286 and 287 + cannot be used though, since there is no length base or extra bits + defined for them. Similarily, there are up to 30 distance codes. + However, static trees define 32 codes (all 5 bits) to fill out the + Huffman codes, but the last two had better not show up in the data. + 7. Unzip can check dynamic Huffman blocks for complete code sets. + The exception is that a single code would not be complete (see #4). + 8. The five bits following the block type is really the number of + literal codes sent minus 257. + 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits + (1+6+6). Therefore, to output three times the length, you output + three codes (1+1+1), whereas to output four times the same length, + you only need two codes (1+3). Hmm. + 10. In the tree reconstruction algorithm, Code = Code + Increment + only if BitLength(i) is not zero. (Pretty obvious.) + 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) + 12. Note: length code 284 can represent 227-258, but length code 285 + really is 258. The last length deserves its own, short code + since it gets used a lot in very redundant files. The length + 258 is special since 258 - 3 (the min match length) is 255. + 13. The literal/length and distance code bit lengths are read as a + single stream of lengths. It is possible (and advantageous) for + a repeat code (16, 17, or 18) to go across the boundary between + the two sets of lengths. + */ + + +local void inflate_blocks_reset(s, z, c) +inflate_blocks_statef *s; +z_stream *z; +uLongf *c; +{ + if (s->checkfn != Z_NULL) + *c = s->check; + if (s->mode == BTREE || s->mode == DTREE) + ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt)); + if (s->mode == CODES) + { + inflate_codes_free(s->sub.decode.codes, z); + inflate_trees_free(s->sub.decode.td, z); + inflate_trees_free(s->sub.decode.tl, z); + } + s->mode = TYPE; + s->bitk = 0; + s->bitb = 0; + s->read = s->write = s->window; + if (s->checkfn != Z_NULL) + s->check = (*s->checkfn)(0L, Z_NULL, 0); + if (z->outcb != Z_NULL) + (*z->outcb)(Z_NULL, 0); + Trace((stderr, "inflate: blocks reset\n")); +} + + +local inflate_blocks_statef *inflate_blocks_new(z, c, w) +z_stream *z; +check_func c; +uInt w; +{ + inflate_blocks_statef *s; + + if ((s = (inflate_blocks_statef *)ZALLOC + (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) + return s; + if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL) + { + ZFREE(z, s, sizeof(struct inflate_blocks_state)); + return Z_NULL; + } + s->end = s->window + w; + s->checkfn = c; + s->mode = TYPE; + Trace((stderr, "inflate: blocks allocated\n")); + inflate_blocks_reset(s, z, &s->check); + return s; +} + + +local int inflate_blocks(s, z, r) +inflate_blocks_statef *s; +z_stream *z; +int r; +{ + uInt t; /* temporary storage */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + + /* copy input/output information to locals (UPDATE macro restores) */ + LOAD + + /* process input based on current state */ + while (1) switch (s->mode) + { + case TYPE: + NEEDBITS(3) + t = (uInt)b & 7; + s->last = t & 1; + switch (t >> 1) + { + case 0: /* stored */ + Trace((stderr, "inflate: stored block%s\n", + s->last ? " (last)" : "")); + DUMPBITS(3) + t = k & 7; /* go to byte boundary */ + DUMPBITS(t) + s->mode = LENS; /* get length of stored block */ + break; + case 1: /* fixed */ + Trace((stderr, "inflate: fixed codes block%s\n", + s->last ? " (last)" : "")); + { + uInt bl, bd; + inflate_huft *tl, *td; + + inflate_trees_fixed(&bl, &bd, &tl, &td); + s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); + if (s->sub.decode.codes == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + s->sub.decode.tl = Z_NULL; /* don't try to free these */ + s->sub.decode.td = Z_NULL; + } + DUMPBITS(3) + s->mode = CODES; + break; + case 2: /* dynamic */ + Trace((stderr, "inflate: dynamic codes block%s\n", + s->last ? " (last)" : "")); + DUMPBITS(3) + s->mode = TABLE; + break; + case 3: /* illegal */ + DUMPBITS(3) + s->mode = BADB; + z->msg = "invalid block type"; + r = Z_DATA_ERROR; + LEAVE + } + break; + case LENS: + NEEDBITS(32) + if (((~b) >> 16) != (b & 0xffff)) + { + s->mode = BADB; + z->msg = "invalid stored block lengths"; + r = Z_DATA_ERROR; + LEAVE + } + s->sub.left = (uInt)b & 0xffff; + b = k = 0; /* dump bits */ + Tracev((stderr, "inflate: stored length %u\n", s->sub.left)); + s->mode = s->sub.left ? STORED : TYPE; + break; + case STORED: + if (n == 0) + LEAVE + NEEDOUT + t = s->sub.left; + if (t > n) t = n; + if (t > m) t = m; + zmemcpy(q, p, t); + p += t; n -= t; + q += t; m -= t; + if ((s->sub.left -= t) != 0) + break; + Tracev((stderr, "inflate: stored end, %lu total out\n", + z->total_out + (q >= s->read ? q - s->read : + (s->end - s->read) + (q - s->window)))); + s->mode = s->last ? DRY : TYPE; + break; + case TABLE: + NEEDBITS(14) + s->sub.trees.table = t = (uInt)b & 0x3fff; +#ifndef PKZIP_BUG_WORKAROUND + if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) + { + s->mode = BADB; + z->msg = "too many length or distance symbols"; + r = Z_DATA_ERROR; + LEAVE + } +#endif + t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); + if (t < 19) + t = 19; + if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + s->sub.trees.nblens = t; + DUMPBITS(14) + s->sub.trees.index = 0; + Tracev((stderr, "inflate: table sizes ok\n")); + s->mode = BTREE; + case BTREE: + while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) + { + NEEDBITS(3) + s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; + DUMPBITS(3) + } + while (s->sub.trees.index < 19) + s->sub.trees.blens[border[s->sub.trees.index++]] = 0; + s->sub.trees.bb = 7; + t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, + &s->sub.trees.tb, z); + if (t != Z_OK) + { + r = t; + if (r == Z_DATA_ERROR) + s->mode = BADB; + LEAVE + } + s->sub.trees.index = 0; + Tracev((stderr, "inflate: bits tree ok\n")); + s->mode = DTREE; + case DTREE: + while (t = s->sub.trees.table, + s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) + { + inflate_huft *h; + uInt i, j, c; + + t = s->sub.trees.bb; + NEEDBITS(t) + h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); + t = h->word.what.Bits; + c = h->more.Base; + if (c < 16) + { + DUMPBITS(t) + s->sub.trees.blens[s->sub.trees.index++] = c; + } + else /* c == 16..18 */ + { + i = c == 18 ? 7 : c - 14; + j = c == 18 ? 11 : 3; + NEEDBITS(t + i) + DUMPBITS(t) + j += (uInt)b & inflate_mask[i]; + DUMPBITS(i) + i = s->sub.trees.index; + t = s->sub.trees.table; + if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || + (c == 16 && i < 1)) + { + s->mode = BADB; + z->msg = "invalid bit length repeat"; + r = Z_DATA_ERROR; + LEAVE + } + c = c == 16 ? s->sub.trees.blens[i - 1] : 0; + do { + s->sub.trees.blens[i++] = c; + } while (--j); + s->sub.trees.index = i; + } + } + inflate_trees_free(s->sub.trees.tb, z); + s->sub.trees.tb = Z_NULL; + { + uInt bl, bd; + inflate_huft *tl, *td; + inflate_codes_statef *c; + + bl = 9; /* must be <= 9 for lookahead assumptions */ + bd = 6; /* must be <= 9 for lookahead assumptions */ + t = s->sub.trees.table; + t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), + s->sub.trees.blens, &bl, &bd, &tl, &td, z); + if (t != Z_OK) + { + if (t == (uInt)Z_DATA_ERROR) + s->mode = BADB; + r = t; + LEAVE + } + Tracev((stderr, "inflate: trees ok\n")); + if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) + { + inflate_trees_free(td, z); + inflate_trees_free(tl, z); + r = Z_MEM_ERROR; + LEAVE + } + ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt)); + s->sub.decode.codes = c; + s->sub.decode.tl = tl; + s->sub.decode.td = td; + } + s->mode = CODES; + case CODES: + UPDATE + if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) + return inflate_flush(s, z, r); + r = Z_OK; + inflate_codes_free(s->sub.decode.codes, z); + inflate_trees_free(s->sub.decode.td, z); + inflate_trees_free(s->sub.decode.tl, z); + LOAD + Tracev((stderr, "inflate: codes end, %lu total out\n", + z->total_out + (q >= s->read ? q - s->read : + (s->end - s->read) + (q - s->window)))); + if (!s->last) + { + s->mode = TYPE; + break; + } + if (k > 7) /* return unused byte, if any */ + { + Assert(k < 16, "inflate_codes grabbed too many bytes") + k -= 8; + n++; + p--; /* can always return one */ + } + s->mode = DRY; + case DRY: + FLUSH + if (s->read != s->write) + LEAVE + s->mode = DONEB; + case DONEB: + r = Z_STREAM_END; + LEAVE + case BADB: + r = Z_DATA_ERROR; + LEAVE + default: + r = Z_STREAM_ERROR; + LEAVE + } +} + + +local int inflate_blocks_free(s, z, c) +inflate_blocks_statef *s; +z_stream *z; +uLongf *c; +{ + inflate_blocks_reset(s, z, c); + ZFREE(z, s->window, s->end - s->window); + ZFREE(z, s, sizeof(struct inflate_blocks_state)); + Trace((stderr, "inflate: blocks freed\n")); + return Z_OK; +} + +/* + * This subroutine adds the data at next_in/avail_in to the output history + * without performing any output. The output buffer must be "caught up"; + * i.e. no pending output (hence s->read equals s->write), and the state must + * be BLOCKS (i.e. we should be willing to see the start of a series of + * BLOCKS). On exit, the output will also be caught up, and the checksum + * will have been updated if need be. + */ +local int inflate_addhistory(s, z) +inflate_blocks_statef *s; +z_stream *z; +{ + uLong b; /* bit buffer */ /* NOT USED HERE */ + uInt k; /* bits in bit buffer */ /* NOT USED HERE */ + uInt t; /* temporary storage */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + + if (s->read != s->write) + return Z_STREAM_ERROR; + if (s->mode != TYPE) + return Z_DATA_ERROR; + + /* we're ready to rock */ + LOAD + /* while there is input ready, copy to output buffer, moving + * pointers as needed. + */ + while (n) { + t = n; /* how many to do */ + /* is there room until end of buffer? */ + if (t > m) t = m; + /* update check information */ + if (s->checkfn != Z_NULL) + s->check = (*s->checkfn)(s->check, q, t); + /* output callback */ + if (z->outcb != Z_NULL) + (*z->outcb)(q, t); + zmemcpy(q, p, t); + q += t; + p += t; + n -= t; + z->total_out += t; + s->read = q; /* drag read pointer forward */ +/* WRAP */ /* expand WRAP macro by hand to handle s->read */ + if (q == s->end) { + s->read = q = s->window; + m = WAVAIL; + } + } + UPDATE + return Z_OK; +} + + +/* + * At the end of a Deflate-compressed PPP packet, we expect to have seen + * a `stored' block type value but not the (zero) length bytes. + */ +local int inflate_packet_flush(s) + inflate_blocks_statef *s; +{ + if (s->mode != LENS) + return Z_DATA_ERROR; + s->mode = TYPE; + return Z_OK; +} + + +/*+++++*/ +/* inftrees.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* simplify the use of the inflate_huft type with some defines */ +#define base more.Base +#define next more.Next +#define exop word.what.Exop +#define bits word.what.Bits + + +local int huft_build OF(( + uIntf *, /* code lengths in bits */ + uInt, /* number of codes */ + uInt, /* number of "simple" codes */ + uIntf *, /* list of base values for non-simple codes */ + uIntf *, /* list of extra bits for non-simple codes */ + inflate_huft * FAR*,/* result: starting table */ + uIntf *, /* maximum lookup bits (returns actual) */ + z_stream *)); /* for zalloc function */ + +local voidpf falloc OF(( + voidpf, /* opaque pointer (not used) */ + uInt, /* number of items */ + uInt)); /* size of item */ + +local void ffree OF(( + voidpf q, /* opaque pointer (not used) */ + voidpf p, /* what to free (not used) */ + uInt n)); /* number of bytes (not used) */ + +/* Tables for deflate from PKZIP's appnote.txt. */ +local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + /* actually lengths - 2; also see note #13 above about 258 */ +local uInt cplext[] = { /* Extra bits for literal codes 257..285 */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, + 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */ +local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577}; +local uInt cpdext[] = { /* Extra bits for distance codes */ + 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, + 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, + 12, 12, 13, 13}; + +/* + Huffman code decoding is performed using a multi-level table lookup. + The fastest way to decode is to simply build a lookup table whose + size is determined by the longest code. However, the time it takes + to build this table can also be a factor if the data being decoded + is not very long. The most common codes are necessarily the + shortest codes, so those codes dominate the decoding time, and hence + the speed. The idea is you can have a shorter table that decodes the + shorter, more probable codes, and then point to subsidiary tables for + the longer codes. The time it costs to decode the longer codes is + then traded against the time it takes to make longer tables. + + This results of this trade are in the variables lbits and dbits + below. lbits is the number of bits the first level table for literal/ + length codes can decode in one step, and dbits is the same thing for + the distance codes. Subsequent tables are also less than or equal to + those sizes. These values may be adjusted either when all of the + codes are shorter than that, in which case the longest code length in + bits is used, or when the shortest code is *longer* than the requested + table size, in which case the length of the shortest code in bits is + used. + + There are two different values for the two tables, since they code a + different number of possibilities each. The literal/length table + codes 286 possible values, or in a flat code, a little over eight + bits. The distance table codes 30 possible values, or a little less + than five bits, flat. The optimum values for speed end up being + about one bit more than those, so lbits is 8+1 and dbits is 5+1. + The optimum values may differ though from machine to machine, and + possibly even between compilers. Your mileage may vary. + */ + + +/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ +#define BMAX 15 /* maximum bit length of any code */ +#define N_MAX 288 /* maximum number of codes in any set */ + +#ifdef DEBUG_ZLIB + uInt inflate_hufts; +#endif + +local int huft_build(b, n, s, d, e, t, m, zs) +uIntf *b; /* code lengths in bits (all assumed <= BMAX) */ +uInt n; /* number of codes (assumed <= N_MAX) */ +uInt s; /* number of simple-valued codes (0..s-1) */ +uIntf *d; /* list of base values for non-simple codes */ +uIntf *e; /* list of extra bits for non-simple codes */ +inflate_huft * FAR *t; /* result: starting table */ +uIntf *m; /* maximum lookup bits, returns actual */ +z_stream *zs; /* for zalloc function */ +/* Given a list of code lengths and a maximum table size, make a set of + tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR + if the given code set is incomplete (the tables are still built in this + case), Z_DATA_ERROR if the input is invalid (all zero length codes or an + over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */ +{ + + uInt a; /* counter for codes of length k */ + uInt c[BMAX+1]; /* bit length count table */ + uInt f; /* i repeats in table every f entries */ + int g; /* maximum code length */ + int h; /* table level */ + register uInt i; /* counter, current code */ + register uInt j; /* counter */ + register int k; /* number of bits in current code */ + int l; /* bits per table (returned in m) */ + register uIntf *p; /* pointer into c[], b[], or v[] */ + inflate_huft *q; /* points to current table */ + struct inflate_huft_s r; /* table entry for structure assignment */ + inflate_huft *u[BMAX]; /* table stack */ + uInt v[N_MAX]; /* values in order of bit length */ + register int w; /* bits before this table == (l * h) */ + uInt x[BMAX+1]; /* bit offsets, then code stack */ + uIntf *xp; /* pointer into x */ + int y; /* number of dummy codes added */ + uInt z; /* number of entries in current table */ + + + /* Generate counts for each bit length */ + p = c; +#define C0 *p++ = 0; +#define C2 C0 C0 C0 C0 +#define C4 C2 C2 C2 C2 + C4 /* clear c[]--assume BMAX+1 is 16 */ + p = b; i = n; + do { + c[*p++]++; /* assume all entries <= BMAX */ + } while (--i); + if (c[0] == n) /* null input--all zero length codes */ + { + *t = (inflate_huft *)Z_NULL; + *m = 0; + return Z_OK; + } + + + /* Find minimum and maximum length, bound *m by those */ + l = *m; + for (j = 1; j <= BMAX; j++) + if (c[j]) + break; + k = j; /* minimum code length */ + if ((uInt)l < j) + l = j; + for (i = BMAX; i; i--) + if (c[i]) + break; + g = i; /* maximum code length */ + if ((uInt)l > i) + l = i; + *m = l; + + + /* Adjust last length count to fill out codes, if needed */ + for (y = 1 << j; j < i; j++, y <<= 1) + if ((y -= c[j]) < 0) + return Z_DATA_ERROR; + if ((y -= c[i]) < 0) + return Z_DATA_ERROR; + c[i] += y; + + + /* Generate starting offsets into the value table for each length */ + x[1] = j = 0; + p = c + 1; xp = x + 2; + while (--i) { /* note that i == g from above */ + *xp++ = (j += *p++); + } + + + /* Make a table of values in order of bit lengths */ + p = b; i = 0; + do { + if ((j = *p++) != 0) + v[x[j]++] = i; + } while (++i < n); + + + /* Generate the Huffman codes and for each, make the table entries */ + x[0] = i = 0; /* first Huffman code is zero */ + p = v; /* grab values in bit order */ + h = -1; /* no tables yet--level -1 */ + w = -l; /* bits decoded == (l * h) */ + u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ + q = (inflate_huft *)Z_NULL; /* ditto */ + z = 0; /* ditto */ + + /* go through the bit lengths (k already is bits in shortest code) */ + for (; k <= g; k++) + { + a = c[k]; + while (a--) + { + /* here i is the Huffman code of length k bits for value *p */ + /* make tables up to required level */ + while (k > w + l) + { + h++; + w += l; /* previous table always l bits */ + + /* compute minimum size table less than or equal to l bits */ + z = (z = g - w) > (uInt)l ? l : z; /* table size upper limit */ + if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ + { /* too few codes for k-w bit table */ + f -= a + 1; /* deduct codes from patterns left */ + xp = c + k; + if (j < z) + while (++j < z) /* try smaller tables up to z bits */ + { + if ((f <<= 1) <= *++xp) + break; /* enough codes to use up j bits */ + f -= *xp; /* else deduct codes from patterns */ + } + } + z = 1 << j; /* table entries for j-bit table */ + + /* allocate and link in new table */ + if ((q = (inflate_huft *)ZALLOC + (zs,z + 1,sizeof(inflate_huft))) == Z_NULL) + { + if (h) + inflate_trees_free(u[0], zs); + return Z_MEM_ERROR; /* not enough memory */ + } + q->word.Nalloc = z + 1; +#ifdef DEBUG_ZLIB + inflate_hufts += z + 1; +#endif + *t = q + 1; /* link to list for huft_free() */ + *(t = &(q->next)) = Z_NULL; + u[h] = ++q; /* table starts after link */ + + /* connect to last table, if there is one */ + if (h) + { + x[h] = i; /* save pattern for backing up */ + r.bits = (Byte)l; /* bits to dump before this table */ + r.exop = (Byte)j; /* bits in this table */ + r.next = q; /* pointer to this table */ + j = i >> (w - l); /* (get around Turbo C bug) */ + u[h-1][j] = r; /* connect to last table */ + } + } + + /* set up table entry in r */ + r.bits = (Byte)(k - w); + if (p >= v + n) + r.exop = 128 + 64; /* out of values--invalid code */ + else if (*p < s) + { + r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ + r.base = *p++; /* simple code is just the value */ + } + else + { + r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */ + r.base = d[*p++ - s]; + } + + /* fill code-like entries with r */ + f = 1 << (k - w); + for (j = i >> w; j < z; j += f) + q[j] = r; + + /* backwards increment the k-bit code i */ + for (j = 1 << (k - 1); i & j; j >>= 1) + i ^= j; + i ^= j; + + /* backup over finished tables */ + while ((i & ((1 << w) - 1)) != x[h]) + { + h--; /* don't need to update q */ + w -= l; + } + } + } + + + /* Return Z_BUF_ERROR if we were given an incomplete table */ + return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; +} + + +local int inflate_trees_bits(c, bb, tb, z) +uIntf *c; /* 19 code lengths */ +uIntf *bb; /* bits tree desired/actual depth */ +inflate_huft * FAR *tb; /* bits tree result */ +z_stream *z; /* for zfree function */ +{ + int r; + + r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z); + if (r == Z_DATA_ERROR) + z->msg = "oversubscribed dynamic bit lengths tree"; + else if (r == Z_BUF_ERROR) + { + inflate_trees_free(*tb, z); + z->msg = "incomplete dynamic bit lengths tree"; + r = Z_DATA_ERROR; + } + return r; +} + + +local int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z) +uInt nl; /* number of literal/length codes */ +uInt nd; /* number of distance codes */ +uIntf *c; /* that many (total) code lengths */ +uIntf *bl; /* literal desired/actual bit depth */ +uIntf *bd; /* distance desired/actual bit depth */ +inflate_huft * FAR *tl; /* literal/length tree result */ +inflate_huft * FAR *td; /* distance tree result */ +z_stream *z; /* for zfree function */ +{ + int r; + + /* build literal/length tree */ + if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK) + { + if (r == Z_DATA_ERROR) + z->msg = "oversubscribed literal/length tree"; + else if (r == Z_BUF_ERROR) + { + inflate_trees_free(*tl, z); + z->msg = "incomplete literal/length tree"; + r = Z_DATA_ERROR; + } + return r; + } + + /* build distance tree */ + if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK) + { + if (r == Z_DATA_ERROR) + z->msg = "oversubscribed literal/length tree"; + else if (r == Z_BUF_ERROR) { +#ifdef PKZIP_BUG_WORKAROUND + r = Z_OK; + } +#else + inflate_trees_free(*td, z); + z->msg = "incomplete literal/length tree"; + r = Z_DATA_ERROR; + } + inflate_trees_free(*tl, z); + return r; +#endif + } + + /* done */ + return Z_OK; +} + + +/* build fixed tables only once--keep them here */ +local int fixed_lock = 0; +local int fixed_built = 0; +#define FIXEDH 530 /* number of hufts used by fixed tables */ +local uInt fixed_left = FIXEDH; +local inflate_huft fixed_mem[FIXEDH]; +local uInt fixed_bl; +local uInt fixed_bd; +local inflate_huft *fixed_tl; +local inflate_huft *fixed_td; + + +local voidpf falloc(q, n, s) +voidpf q; /* opaque pointer (not used) */ +uInt n; /* number of items */ +uInt s; /* size of item */ +{ + Assert(s == sizeof(inflate_huft) && n <= fixed_left, + "inflate_trees falloc overflow"); + if (q) s++; /* to make some compilers happy */ + fixed_left -= n; + return (voidpf)(fixed_mem + fixed_left); +} + + +local void ffree(q, p, n) +voidpf q; +voidpf p; +uInt n; +{ + Assert(0, "inflate_trees ffree called!"); + if (q) q = p; /* to make some compilers happy */ +} + + +local int inflate_trees_fixed(bl, bd, tl, td) +uIntf *bl; /* literal desired/actual bit depth */ +uIntf *bd; /* distance desired/actual bit depth */ +inflate_huft * FAR *tl; /* literal/length tree result */ +inflate_huft * FAR *td; /* distance tree result */ +{ + /* build fixed tables if not built already--lock out other instances */ + while (++fixed_lock > 1) + fixed_lock--; + if (!fixed_built) + { + int k; /* temporary variable */ + unsigned c[288]; /* length list for huft_build */ + z_stream z; /* for falloc function */ + + /* set up fake z_stream for memory routines */ + z.zalloc = falloc; + z.zfree = ffree; + z.opaque = Z_NULL; + + /* literal table */ + for (k = 0; k < 144; k++) + c[k] = 8; + for (; k < 256; k++) + c[k] = 9; + for (; k < 280; k++) + c[k] = 7; + for (; k < 288; k++) + c[k] = 8; + fixed_bl = 7; + huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z); + + /* distance table */ + for (k = 0; k < 30; k++) + c[k] = 5; + fixed_bd = 5; + huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z); + + /* done */ + fixed_built = 1; + } + fixed_lock--; + *bl = fixed_bl; + *bd = fixed_bd; + *tl = fixed_tl; + *td = fixed_td; + return Z_OK; +} + + +local int inflate_trees_free(t, z) +inflate_huft *t; /* table to free */ +z_stream *z; /* for zfree function */ +/* Free the malloc'ed tables built by huft_build(), which makes a linked + list of the tables it made, with the links in a dummy first entry of + each table. */ +{ + register inflate_huft *p, *q; + + /* Go through linked list, freeing from the malloced (t[-1]) address. */ + p = t; + while (p != Z_NULL) + { + q = (--p)->next; + ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft)); + p = q; + } + return Z_OK; +} + +/*+++++*/ +/* infcodes.c -- process literals and length/distance pairs + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* simplify the use of the inflate_huft type with some defines */ +#define base more.Base +#define next more.Next +#define exop word.what.Exop +#define bits word.what.Bits + +/* inflate codes private state */ +struct inflate_codes_state { + + /* mode */ + enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ + START, /* x: set up for LEN */ + LEN, /* i: get length/literal/eob next */ + LENEXT, /* i: getting length extra (have base) */ + DIST, /* i: get distance next */ + DISTEXT, /* i: getting distance extra */ + COPY, /* o: copying bytes in window, waiting for space */ + LIT, /* o: got literal, waiting for output space */ + WASH, /* o: got eob, possibly still output waiting */ + END, /* x: got eob and all data flushed */ + BADCODE} /* x: got error */ + mode; /* current inflate_codes mode */ + + /* mode dependent information */ + uInt len; + union { + struct { + inflate_huft *tree; /* pointer into tree */ + uInt need; /* bits needed */ + } code; /* if LEN or DIST, where in tree */ + uInt lit; /* if LIT, literal */ + struct { + uInt get; /* bits to get for extra */ + uInt dist; /* distance back to copy from */ + } copy; /* if EXT or COPY, where and how much */ + } sub; /* submode */ + + /* mode independent information */ + Byte lbits; /* ltree bits decoded per branch */ + Byte dbits; /* dtree bits decoder per branch */ + inflate_huft *ltree; /* literal/length/eob tree */ + inflate_huft *dtree; /* distance tree */ + +}; + + +local inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z) +uInt bl, bd; +inflate_huft *tl, *td; +z_stream *z; +{ + inflate_codes_statef *c; + + if ((c = (inflate_codes_statef *) + ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) + { + c->mode = START; + c->lbits = (Byte)bl; + c->dbits = (Byte)bd; + c->ltree = tl; + c->dtree = td; + Tracev((stderr, "inflate: codes new\n")); + } + return c; +} + + +local int inflate_codes(s, z, r) +inflate_blocks_statef *s; +z_stream *z; +int r; +{ + uInt j; /* temporary storage */ + inflate_huft *t; /* temporary pointer */ + uInt e; /* extra bits or operation */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + Bytef *f; /* pointer to copy strings from */ + inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ + + /* copy input/output information to locals (UPDATE macro restores) */ + LOAD + + /* process input and output based on current state */ + while (1) switch (c->mode) + { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ + case START: /* x: set up for LEN */ +#ifndef SLOW + if (m >= 258 && n >= 10) + { + UPDATE + r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); + LOAD + if (r != Z_OK) + { + c->mode = r == Z_STREAM_END ? WASH : BADCODE; + break; + } + } +#endif /* !SLOW */ + c->sub.code.need = c->lbits; + c->sub.code.tree = c->ltree; + c->mode = LEN; + case LEN: /* i: get length/literal/eob next */ + j = c->sub.code.need; + NEEDBITS(j) + t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); + DUMPBITS(t->bits) + e = (uInt)(t->exop); + if (e == 0) /* literal */ + { + c->sub.lit = t->base; + Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", t->base)); + c->mode = LIT; + break; + } + if (e & 16) /* length */ + { + c->sub.copy.get = e & 15; + c->len = t->base; + c->mode = LENEXT; + break; + } + if ((e & 64) == 0) /* next table */ + { + c->sub.code.need = e; + c->sub.code.tree = t->next; + break; + } + if (e & 32) /* end of block */ + { + Tracevv((stderr, "inflate: end of block\n")); + c->mode = WASH; + break; + } + c->mode = BADCODE; /* invalid code */ + z->msg = "invalid literal/length code"; + r = Z_DATA_ERROR; + LEAVE + case LENEXT: /* i: getting length extra (have base) */ + j = c->sub.copy.get; + NEEDBITS(j) + c->len += (uInt)b & inflate_mask[j]; + DUMPBITS(j) + c->sub.code.need = c->dbits; + c->sub.code.tree = c->dtree; + Tracevv((stderr, "inflate: length %u\n", c->len)); + c->mode = DIST; + case DIST: /* i: get distance next */ + j = c->sub.code.need; + NEEDBITS(j) + t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); + DUMPBITS(t->bits) + e = (uInt)(t->exop); + if (e & 16) /* distance */ + { + c->sub.copy.get = e & 15; + c->sub.copy.dist = t->base; + c->mode = DISTEXT; + break; + } + if ((e & 64) == 0) /* next table */ + { + c->sub.code.need = e; + c->sub.code.tree = t->next; + break; + } + c->mode = BADCODE; /* invalid code */ + z->msg = "invalid distance code"; + r = Z_DATA_ERROR; + LEAVE + case DISTEXT: /* i: getting distance extra */ + j = c->sub.copy.get; + NEEDBITS(j) + c->sub.copy.dist += (uInt)b & inflate_mask[j]; + DUMPBITS(j) + Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist)); + c->mode = COPY; + case COPY: /* o: copying bytes in window, waiting for space */ +#ifndef __TURBOC__ /* Turbo C bug for following expression */ + f = (uInt)(q - s->window) < c->sub.copy.dist ? + s->end - (c->sub.copy.dist - (q - s->window)) : + q - c->sub.copy.dist; +#else + f = q - c->sub.copy.dist; + if ((uInt)(q - s->window) < c->sub.copy.dist) + f = s->end - (c->sub.copy.dist - (q - s->window)); +#endif + while (c->len) + { + NEEDOUT + OUTBYTE(*f++) + if (f == s->end) + f = s->window; + c->len--; + } + c->mode = START; + break; + case LIT: /* o: got literal, waiting for output space */ + NEEDOUT + OUTBYTE(c->sub.lit) + c->mode = START; + break; + case WASH: /* o: got eob, possibly more output */ + FLUSH + if (s->read != s->write) + LEAVE + c->mode = END; + case END: + r = Z_STREAM_END; + LEAVE + case BADCODE: /* x: got error */ + r = Z_DATA_ERROR; + LEAVE + default: + r = Z_STREAM_ERROR; + LEAVE + } +} + + +local void inflate_codes_free(c, z) +inflate_codes_statef *c; +z_stream *z; +{ + ZFREE(z, c, sizeof(struct inflate_codes_state)); + Tracev((stderr, "inflate: codes free\n")); +} + +/*+++++*/ +/* inflate_util.c -- data and routines common to blocks and codes + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* copy as much as possible from the sliding window to the output area */ +local int inflate_flush(s, z, r) +inflate_blocks_statef *s; +z_stream *z; +int r; +{ + uInt n; + Bytef *p, *q; + + /* local copies of source and destination pointers */ + p = z->next_out; + q = s->read; + + /* compute number of bytes to copy as far as end of window */ + n = (uInt)((q <= s->write ? s->write : s->end) - q); + if (n > z->avail_out) n = z->avail_out; + if (n && r == Z_BUF_ERROR) r = Z_OK; + + /* update counters */ + z->avail_out -= n; + z->total_out += n; + + /* update check information */ + if (s->checkfn != Z_NULL) + s->check = (*s->checkfn)(s->check, q, n); + + /* output callback */ + if (z->outcb != Z_NULL) + (*z->outcb)(q, n); + + /* copy as far as end of window */ + zmemcpy(p, q, n); + p += n; + q += n; + + /* see if more to copy at beginning of window */ + if (q == s->end) + { + /* wrap pointers */ + q = s->window; + if (s->write == s->end) + s->write = s->window; + + /* compute bytes to copy */ + n = (uInt)(s->write - q); + if (n > z->avail_out) n = z->avail_out; + if (n && r == Z_BUF_ERROR) r = Z_OK; + + /* update counters */ + z->avail_out -= n; + z->total_out += n; + + /* update check information */ + if (s->checkfn != Z_NULL) + s->check = (*s->checkfn)(s->check, q, n); + + /* output callback */ + if (z->outcb != Z_NULL) + (*z->outcb)(q, n); + + /* copy */ + zmemcpy(p, q, n); + p += n; + q += n; + } + + /* update pointers */ + z->next_out = p; + s->read = q; + + /* done */ + return r; +} + + +/*+++++*/ +/* inffast.c -- process literals and length/distance pairs fast + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* simplify the use of the inflate_huft type with some defines */ +#define base more.Base +#define next more.Next +#define exop word.what.Exop +#define bits word.what.Bits + +/* macros for bit input with no checking and for returning unused bytes */ +#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<>3);p-=c;k&=7;} + +/* Called with number of bytes left to write in window at least 258 + (the maximum string length) and number of input bytes available + at least ten. The ten bytes are six bytes for the longest length/ + distance pair plus four bytes for overloading the bit buffer. */ + +local int inflate_fast(bl, bd, tl, td, s, z) +uInt bl, bd; +inflate_huft *tl, *td; +inflate_blocks_statef *s; +z_stream *z; +{ + inflate_huft *t; /* temporary pointer */ + uInt e; /* extra bits or operation */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + uInt ml; /* mask for literal/length tree */ + uInt md; /* mask for distance tree */ + uInt c; /* bytes to copy */ + uInt d; /* distance back to copy from */ + Bytef *r; /* copy source pointer */ + + /* load input, output, bit values */ + LOAD + + /* initialize masks */ + ml = inflate_mask[bl]; + md = inflate_mask[bd]; + + /* do until not enough input or output space for fast loop */ + do { /* assume called with m >= 258 && n >= 10 */ + /* get literal/length code */ + GRABBITS(20) /* max bits for literal/length code */ + if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) + { + DUMPBITS(t->bits) + Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? + "inflate: * literal '%c'\n" : + "inflate: * literal 0x%02x\n", t->base)); + *q++ = (Byte)t->base; + m--; + continue; + } + do { + DUMPBITS(t->bits) + if (e & 16) + { + /* get extra bits for length */ + e &= 15; + c = t->base + ((uInt)b & inflate_mask[e]); + DUMPBITS(e) + Tracevv((stderr, "inflate: * length %u\n", c)); + + /* decode distance base of block to copy */ + GRABBITS(15); /* max bits for distance code */ + e = (t = td + ((uInt)b & md))->exop; + do { + DUMPBITS(t->bits) + if (e & 16) + { + /* get extra bits to add to distance base */ + e &= 15; + GRABBITS(e) /* get extra bits (up to 13) */ + d = t->base + ((uInt)b & inflate_mask[e]); + DUMPBITS(e) + Tracevv((stderr, "inflate: * distance %u\n", d)); + + /* do the copy */ + m -= c; + if ((uInt)(q - s->window) >= d) /* offset before dest */ + { /* just copy */ + r = q - d; + *q++ = *r++; c--; /* minimum count is three, */ + *q++ = *r++; c--; /* so unroll loop a little */ + } + else /* else offset after destination */ + { + e = d - (q - s->window); /* bytes from offset to end */ + r = s->end - e; /* pointer to offset */ + if (c > e) /* if source crosses, */ + { + c -= e; /* copy to end of window */ + do { + *q++ = *r++; + } while (--e); + r = s->window; /* copy rest from start of window */ + } + } + do { /* copy all or what's left */ + *q++ = *r++; + } while (--c); + break; + } + else if ((e & 64) == 0) + e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop; + else + { + z->msg = "invalid distance code"; + UNGRAB + UPDATE + return Z_DATA_ERROR; + } + } while (1); + break; + } + if ((e & 64) == 0) + { + if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0) + { + DUMPBITS(t->bits) + Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? + "inflate: * literal '%c'\n" : + "inflate: * literal 0x%02x\n", t->base)); + *q++ = (Byte)t->base; + m--; + break; + } + } + else if (e & 32) + { + Tracevv((stderr, "inflate: * end of block\n")); + UNGRAB + UPDATE + return Z_STREAM_END; + } + else + { + z->msg = "invalid literal/length code"; + UNGRAB + UPDATE + return Z_DATA_ERROR; + } + } while (1); + } while (m >= 258 && n >= 10); + + /* not enough input or output--restore pointers and return */ + UNGRAB + UPDATE + return Z_OK; +} + + +/*+++++*/ +/* zutil.c -- target dependent utility functions for the compression library + * Copyright (C) 1995 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */ + +char *zlib_version = ZLIB_VERSION; + +char *z_errmsg[] = { +"stream end", /* Z_STREAM_END 1 */ +"", /* Z_OK 0 */ +"file error", /* Z_ERRNO (-1) */ +"stream error", /* Z_STREAM_ERROR (-2) */ +"data error", /* Z_DATA_ERROR (-3) */ +"insufficient memory", /* Z_MEM_ERROR (-4) */ +"buffer error", /* Z_BUF_ERROR (-5) */ +""}; + + +/*+++++*/ +/* adler32.c -- compute the Adler-32 checksum of a data stream + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */ + +#define BASE 65521L /* largest prime smaller than 65536 */ +#define NMAX 5552 +/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ + +#define DO1(buf) {s1 += *buf++; s2 += s1;} +#define DO2(buf) DO1(buf); DO1(buf); +#define DO4(buf) DO2(buf); DO2(buf); +#define DO8(buf) DO4(buf); DO4(buf); +#define DO16(buf) DO8(buf); DO8(buf); + +/* ========================================================================= */ +uLong adler32(adler, buf, len) + uLong adler; + Bytef *buf; + uInt len; +{ + unsigned long s1 = adler & 0xffff; + unsigned long s2 = (adler >> 16) & 0xffff; + int k; + + if (buf == Z_NULL) return 1L; + + while (len > 0) { + k = len < NMAX ? len : NMAX; + len -= k; + while (k >= 16) { + DO16(buf); + k -= 16; + } + if (k != 0) do { + DO1(buf); + } while (--k); + s1 %= BASE; + s2 %= BASE; + } + return (s2 << 16) | s1; +} diff --git a/tools/gdb/remote.c b/tools/gdb/remote.c new file mode 100644 index 0000000000..b8b2470219 --- /dev/null +++ b/tools/gdb/remote.c @@ -0,0 +1,928 @@ +/* + * taken from gdb/remote.c + * + * I am only interested in the write to memory stuff - everything else + * has been ripped out + * + * all the copyright notices etc have been left in + */ + +/* enough so that it will compile */ +#include +#include +#include +#include + +/*nicked from gcc..*/ + +#ifndef alloca +#ifdef __GNUC__ +#define alloca __builtin_alloca +#else /* not GNU C. */ +#if (!defined (__STDC__) && defined (sparc)) || defined (__sparc__) || defined (__sparc) || defined (__sgi) +#include +#else /* not sparc */ +#if defined (MSDOS) && !defined (__TURBOC__) +#include +#else /* not MSDOS, or __TURBOC__ */ +#if defined(_AIX) +#include + #pragma alloca +#else /* not MSDOS, __TURBOC__, or _AIX */ +#ifdef __hpux +#endif /* __hpux */ +#endif /* not _AIX */ +#endif /* not MSDOS, or __TURBOC__ */ +#endif /* not sparc. */ +#endif /* not GNU C. */ +#ifdef __cplusplus +extern "C" { +#endif + void* alloca(size_t); +#ifdef __cplusplus +} +#endif +#endif /* alloca not defined. */ + + +#include "serial.h" +#include "error.h" +#include "remote.h" +#define REGISTER_BYTES 0 +#define fprintf_unfiltered fprintf +#define fprintf_filtered fprintf +#define fputs_unfiltered fputs +#define fputs_filtered fputs +#define fputc_unfiltered fputc +#define fputc_filtered fputc +#define printf_unfiltered printf +#define printf_filtered printf +#define puts_unfiltered puts +#define puts_filtered puts +#define putchar_unfiltered putchar +#define putchar_filtered putchar +#define fputstr_unfiltered(a,b,c) fputs((a), (c)) +#define gdb_stdlog stderr +#define SERIAL_READCHAR(fd,timo) serialreadchar((fd), (timo)) +#define SERIAL_WRITE(fd, addr, len) serialwrite((fd), (addr), (len)) +#define error Error +#define perror_with_name Perror +#define gdb_flush fflush +#define max(a,b) (((a)>(b))?(a):(b)) +#define min(a,b) (((a)<(b))?(a):(b)) +#define target_mourn_inferior() {} +#define ULONGEST unsigned long +#define CORE_ADDR unsigned long + +static int putpkt (char *); +static int putpkt_binary(char *, int); +static void getpkt (char *, int); + +static int remote_debug = 0, remote_register_buf_size = 0, watchdog = 0; + +int remote_desc = -1, remote_timeout = 10; + +static void +fputstrn_unfiltered(char *s, int n, int x, FILE *fp) +{ + while (n-- > 0) + fputc(*s++, fp); +} + +void +remote_reset(void) +{ + SERIAL_WRITE(remote_desc, "+", 1); +} + +void +remote_continue(void) +{ + putpkt("c"); +} + +/* Remote target communications for serial-line targets in custom GDB protocol + Copyright 1988, 91, 92, 93, 94, 95, 96, 97, 98, 1999 + Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ +/* *INDENT-OFF* */ +/* Remote communication protocol. + + A debug packet whose contents are + is encapsulated for transmission in the form: + + $ # CSUM1 CSUM2 + + must be ASCII alphanumeric and cannot include characters + '$' or '#'. If starts with two characters followed by + ':', then the existing stubs interpret this as a sequence number. + + CSUM1 and CSUM2 are ascii hex representation of an 8-bit + checksum of , the most significant nibble is sent first. + the hex digits 0-9,a-f are used. + + Receiver responds with: + + + - if CSUM is correct and ready for next packet + - - if CSUM is incorrect + + is as follows: + Most values are encoded in ascii hex digits. Signal numbers are according + to the numbering in target.h. + + Request Packet + + set thread Hct... Set thread for subsequent operations. + c = 'c' for thread used in step and + continue; t... can be -1 for all + threads. + c = 'g' for thread used in other + operations. If zero, pick a thread, + any thread. + reply OK for success + ENN for an error. + + read registers g + reply XX....X Each byte of register data + is described by two hex digits. + Registers are in the internal order + for GDB, and the bytes in a register + are in the same order the machine uses. + or ENN for an error. + + write regs GXX..XX Each byte of register data + is described by two hex digits. + reply OK for success + ENN for an error + + write reg Pn...=r... Write register n... with value r..., + which contains two hex digits for each + byte in the register (target byte + order). + reply OK for success + ENN for an error + (not supported by all stubs). + + read mem mAA..AA,LLLL AA..AA is address, LLLL is length. + reply XX..XX XX..XX is mem contents + Can be fewer bytes than requested + if able to read only part of the data. + or ENN NN is errno + + write mem MAA..AA,LLLL:XX..XX + AA..AA is address, + LLLL is number of bytes, + XX..XX is data + reply OK for success + ENN for an error (this includes the case + where only part of the data was + written). + + write mem XAA..AA,LLLL:XX..XX + (binary) AA..AA is address, + LLLL is number of bytes, + XX..XX is binary data + reply OK for success + ENN for an error + + continue cAA..AA AA..AA is address to resume + If AA..AA is omitted, + resume at same address. + + step sAA..AA AA..AA is address to resume + If AA..AA is omitted, + resume at same address. + + continue with Csig;AA..AA Continue with signal sig (hex signal + signal number). If ;AA..AA is omitted, + resume at same address. + + step with Ssig;AA..AA Like 'C' but step not continue. + signal + + last signal ? Reply the current reason for stopping. + This is the same reply as is generated + for step or cont : SAA where AA is the + signal number. + + detach D Reply OK. + + There is no immediate reply to step or cont. + The reply comes when the machine stops. + It is SAA AA is the signal number. + + or... TAAn...:r...;n...:r...;n...:r...; + AA = signal number + n... = register number (hex) + r... = register contents + n... = `thread' + r... = thread process ID. This is + a hex integer. + n... = other string not starting + with valid hex digit. + gdb should ignore this n,r pair + and go on to the next. This way + we can extend the protocol. + or... WAA The process exited, and AA is + the exit status. This is only + applicable for certains sorts of + targets. + or... XAA The process terminated with signal + AA. + or (obsolete) NAA;tttttttt;dddddddd;bbbbbbbb + AA = signal number + tttttttt = address of symbol "_start" + dddddddd = base of data section + bbbbbbbb = base of bss section. + Note: only used by Cisco Systems + targets. The difference between this + reply and the "qOffsets" query is that + the 'N' packet may arrive spontaneously + whereas the 'qOffsets' is a query + initiated by the host debugger. + or... OXX..XX XX..XX is hex encoding of ASCII data. This + can happen at any time while the + program is running and the debugger + should continue to wait for + 'W', 'T', etc. + + thread alive TXX Find out if the thread XX is alive. + reply OK thread is still alive + ENN thread is dead + + remote restart RXX Restart the remote server + + extended ops ! Use the extended remote protocol. + Sticky -- only needs to be set once. + + kill request k + + toggle debug d toggle debug flag (see 386 & 68k stubs) + reset r reset -- see sparc stub. + reserved On other requests, the stub should + ignore the request and send an empty + response ($#). This way + we can extend the protocol and GDB + can tell whether the stub it is + talking to uses the old or the new. + search tAA:PP,MM Search backwards starting at address + AA for a match with pattern PP and + mask MM. PP and MM are 4 bytes. + Not supported by all stubs. + + general query qXXXX Request info about XXXX. + general set QXXXX=yyyy Set value of XXXX to yyyy. + query sect offs qOffsets Get section offsets. Reply is + Text=xxx;Data=yyy;Bss=zzz + + Responses can be run-length encoded to save space. A '*' means that + the next character is an ASCII encoding giving a repeat count which + stands for that many repititions of the character preceding the '*'. + The encoding is n+29, yielding a printable character where n >=3 + (which is where rle starts to win). Don't use an n > 126. + + So + "0* " means the same as "0000". */ +/* *INDENT-ON* */ + +/* This variable (available to the user via "set remotebinarydownload") + dictates whether downloads are sent in binary (via the 'X' packet). + We assume that the stub can, and attempt to do it. This will be cleared if + the stub does not understand it. This switch is still needed, though + in cases when the packet is supported in the stub, but the connection + does not allow it (i.e., 7-bit serial connection only). */ +static int remote_binary_download = 1; + +/* Have we already checked whether binary downloads work? */ +static int remote_binary_checked; + +/* Maximum number of bytes to read/write at once. The value here + is chosen to fill up a packet (the headers account for the 32). */ +#define MAXBUFBYTES(N) (((N)-32)/2) + +/* Having this larger than 400 causes us to be incompatible with m68k-stub.c + and i386-stub.c. Normally, no one would notice because it only matters + for writing large chunks of memory (e.g. in downloads). Also, this needs + to be more than 400 if required to hold the registers (see below, where + we round it up based on REGISTER_BYTES). */ +/* Round up PBUFSIZ to hold all the registers, at least. */ +#define PBUFSIZ ((REGISTER_BYTES > MAXBUFBYTES (400)) \ + ? (REGISTER_BYTES * 2 + 32) \ + : 400) + + +/* This variable sets the number of bytes to be written to the target + in a single packet. Normally PBUFSIZ is satisfactory, but some + targets need smaller values (perhaps because the receiving end + is slow). */ + +static int remote_write_size = 0x7fffffff; + +/* This variable sets the number of bits in an address that are to be + sent in a memory ("M" or "m") packet. Normally, after stripping + leading zeros, the entire address would be sent. This variable + restricts the address to REMOTE_ADDRESS_SIZE bits. HISTORY: The + initial implementation of remote.c restricted the address sent in + memory packets to ``host::sizeof long'' bytes - (typically 32 + bits). Consequently, for 64 bit targets, the upper 32 bits of an + address was never sent. Since fixing this bug may cause a break in + some remote targets this variable is principly provided to + facilitate backward compatibility. */ + +static int remote_address_size; + +/* Convert hex digit A to a number. */ + +static int +fromhex (int a) +{ + if (a >= '0' && a <= '9') + return a - '0'; + else if (a >= 'a' && a <= 'f') + return a - 'a' + 10; + else if (a >= 'A' && a <= 'F') + return a - 'A' + 10; + else { + error ("Reply contains invalid hex digit %d", a); + return -1; + } +} + +/* Convert number NIB to a hex digit. */ + +static int +tohex (int nib) +{ + if (nib < 10) + return '0' + nib; + else + return 'a' + nib - 10; +} + +/* Return the number of hex digits in num. */ + +static int +hexnumlen (ULONGEST num) +{ + int i; + + for (i = 0; num != 0; i++) + num >>= 4; + + return max (i, 1); +} + +/* Set BUF to the hex digits representing NUM. */ + +static int +hexnumstr (char *buf, ULONGEST num) +{ + int i; + int len = hexnumlen (num); + + buf[len] = '\0'; + + for (i = len - 1; i >= 0; i--) + { + buf[i] = "0123456789abcdef"[(num & 0xf)]; + num >>= 4; + } + + return len; +} + +/* Mask all but the least significant REMOTE_ADDRESS_SIZE bits. */ + +static CORE_ADDR +remote_address_masked (CORE_ADDR addr) +{ + if (remote_address_size > 0 + && remote_address_size < (sizeof (ULONGEST) * 8)) + { + /* Only create a mask when that mask can safely be constructed + in a ULONGEST variable. */ + ULONGEST mask = 1; + mask = (mask << remote_address_size) - 1; + addr &= mask; + } + return addr; +} + +/* Determine whether the remote target supports binary downloading. + This is accomplished by sending a no-op memory write of zero length + to the target at the specified address. It does not suffice to send + the whole packet, since many stubs strip the eighth bit and subsequently + compute a wrong checksum, which causes real havoc with remote_write_bytes. + + NOTE: This can still lose if the serial line is not eight-bit clean. In + cases like this, the user should clear "remotebinarydownload". */ +static void +check_binary_download (CORE_ADDR addr) +{ + if (remote_binary_download && !remote_binary_checked) + { + char *buf = alloca (PBUFSIZ); + char *p; + remote_binary_checked = 1; + + p = buf; + *p++ = 'X'; + p += hexnumstr (p, (ULONGEST) addr); + *p++ = ','; + p += hexnumstr (p, (ULONGEST) 0); + *p++ = ':'; + *p = '\0'; + + putpkt_binary (buf, (int) (p - buf)); + getpkt (buf, 0); + + if (buf[0] == '\0') + remote_binary_download = 0; + } + + if (remote_debug) + { + if (remote_binary_download) + fprintf_unfiltered (gdb_stdlog, + "binary downloading suppported by target\n"); + else + fprintf_unfiltered (gdb_stdlog, + "binary downloading NOT suppported by target\n"); + } +} + +/* Write memory data directly to the remote machine. + This does not inform the data cache; the data cache uses this. + MEMADDR is the address in the remote memory space. + MYADDR is the address of the buffer in our space. + LEN is the number of bytes. + + Returns number of bytes transferred, or 0 for error. */ + +int +remote_write_bytes (memaddr, myaddr, len) + CORE_ADDR memaddr; + char *myaddr; + int len; +{ + unsigned char *buf = alloca (PBUFSIZ); + int max_buf_size; /* Max size of packet output buffer */ + int origlen; + extern int verbose; + + /* Verify that the target can support a binary download */ + check_binary_download (memaddr); + + /* Chop the transfer down if necessary */ + + max_buf_size = min (remote_write_size, PBUFSIZ); + if (remote_register_buf_size != 0) + max_buf_size = min (max_buf_size, remote_register_buf_size); + + /* Subtract header overhead from max payload size - $M,:#nn */ + max_buf_size -= 2 + hexnumlen (memaddr + len - 1) + 1 + hexnumlen (len) + 4; + + origlen = len; + while (len > 0) + { + unsigned char *p, *plen; + int todo; + int i; + + /* construct "M"","":" */ + /* sprintf (buf, "M%lx,%x:", (unsigned long) memaddr, todo); */ + memaddr = remote_address_masked (memaddr); + p = buf; + if (remote_binary_download) + { + *p++ = 'X'; + todo = min (len, max_buf_size); + } + else + { + *p++ = 'M'; + todo = min (len, max_buf_size / 2); /* num bytes that will fit */ + } + + p += hexnumstr ((char *)p, (ULONGEST) memaddr); + *p++ = ','; + + plen = p; /* remember where len field goes */ + p += hexnumstr ((char *)p, (ULONGEST) todo); + *p++ = ':'; + *p = '\0'; + + /* We send target system values byte by byte, in increasing byte + addresses, each byte encoded as two hex characters (or one + binary character). */ + if (remote_binary_download) + { + int escaped = 0; + for (i = 0; + (i < todo) && (i + escaped) < (max_buf_size - 2); + i++) + { + switch (myaddr[i] & 0xff) + { + case '$': + case '#': + case 0x7d: + /* These must be escaped */ + escaped++; + *p++ = 0x7d; + *p++ = (myaddr[i] & 0xff) ^ 0x20; + break; + default: + *p++ = myaddr[i] & 0xff; + break; + } + } + + if (i < todo) + { + /* Escape chars have filled up the buffer prematurely, + and we have actually sent fewer bytes than planned. + Fix-up the length field of the packet. */ + + /* FIXME: will fail if new len is a shorter string than + old len. */ + + plen += hexnumstr ((char *)plen, (ULONGEST) i); + *plen++ = ':'; + } + } + else + { + for (i = 0; i < todo; i++) + { + *p++ = tohex ((myaddr[i] >> 4) & 0xf); + *p++ = tohex (myaddr[i] & 0xf); + } + *p = '\0'; + } + + putpkt_binary ((char *)buf, (int) (p - buf)); + getpkt ((char *)buf, 0); + + if (buf[0] == 'E') + { + /* There is no correspondance between what the remote protocol uses + for errors and errno codes. We would like a cleaner way of + representing errors (big enough to include errno codes, bfd_error + codes, and others). But for now just return EIO. */ + errno = EIO; + return 0; + } + + /* Increment by i, not by todo, in case escape chars + caused us to send fewer bytes than we'd planned. */ + myaddr += i; + memaddr += i; + len -= i; + + if (verbose) + putc('.', stderr); + } + return origlen; +} + +/* Stuff for dealing with the packets which are part of this protocol. + See comment at top of file for details. */ + +/* Read a single character from the remote end, masking it down to 7 bits. */ + +static int +readchar (int timeout) +{ + int ch; + + ch = SERIAL_READCHAR (remote_desc, timeout); + + switch (ch) + { + case SERIAL_EOF: + error ("Remote connection closed"); + case SERIAL_ERROR: + perror_with_name ("Remote communication error"); + case SERIAL_TIMEOUT: + return ch; + default: + return ch & 0x7f; + } +} + +static int +putpkt (buf) + char *buf; +{ + return putpkt_binary (buf, strlen (buf)); +} + +/* Send a packet to the remote machine, with error checking. The data + of the packet is in BUF. The string in BUF can be at most PBUFSIZ - 5 + to account for the $, # and checksum, and for a possible /0 if we are + debugging (remote_debug) and want to print the sent packet as a string */ + +static int +putpkt_binary (buf, cnt) + char *buf; + int cnt; +{ + int i; + unsigned char csum = 0; + char *buf2 = alloca (PBUFSIZ); + char *junkbuf = alloca (PBUFSIZ); + + int ch; + int tcount = 0; + char *p; + + /* Copy the packet into buffer BUF2, encapsulating it + and giving it a checksum. */ + + if (cnt > BUFSIZ - 5) /* Prosanity check */ + abort (); + + p = buf2; + *p++ = '$'; + + for (i = 0; i < cnt; i++) + { + csum += buf[i]; + *p++ = buf[i]; + } + *p++ = '#'; + *p++ = tohex ((csum >> 4) & 0xf); + *p++ = tohex (csum & 0xf); + + /* Send it over and over until we get a positive ack. */ + + while (1) + { + int started_error_output = 0; + + if (remote_debug) + { + *p = '\0'; + fprintf_unfiltered (gdb_stdlog, "Sending packet: "); + fputstrn_unfiltered (buf2, p - buf2, 0, gdb_stdlog); + fprintf_unfiltered (gdb_stdlog, "..."); + gdb_flush (gdb_stdlog); + } + if (SERIAL_WRITE (remote_desc, buf2, p - buf2)) + perror_with_name ("putpkt: write failed"); + + /* read until either a timeout occurs (-2) or '+' is read */ + while (1) + { + ch = readchar (remote_timeout); + + if (remote_debug) + { + switch (ch) + { + case '+': + case SERIAL_TIMEOUT: + case '$': + if (started_error_output) + { + putchar_unfiltered ('\n'); + started_error_output = 0; + } + } + } + + switch (ch) + { + case '+': + if (remote_debug) + fprintf_unfiltered (gdb_stdlog, "Ack\n"); + return 1; + case SERIAL_TIMEOUT: + tcount++; + if (tcount > 3) + return 0; + break; /* Retransmit buffer */ + case '$': + { + /* It's probably an old response, and we're out of sync. + Just gobble up the packet and ignore it. */ + getpkt (junkbuf, 0); + continue; /* Now, go look for + */ + } + default: + if (remote_debug) + { + if (!started_error_output) + { + started_error_output = 1; + fprintf_unfiltered (gdb_stdlog, "putpkt: Junk: "); + } + fputc_unfiltered (ch & 0177, gdb_stdlog); + } + continue; + } + break; /* Here to retransmit */ + } + +#if 0 + /* This is wrong. If doing a long backtrace, the user should be + able to get out next time we call QUIT, without anything as + violent as interrupt_query. If we want to provide a way out of + here without getting to the next QUIT, it should be based on + hitting ^C twice as in remote_wait. */ + if (quit_flag) + { + quit_flag = 0; + interrupt_query (); + } +#endif + } +} + +/* Come here after finding the start of the frame. Collect the rest + into BUF, verifying the checksum, length, and handling run-length + compression. Returns 0 on any error, 1 on success. */ + +static int +read_frame (char *buf) +{ + unsigned char csum; + char *bp; + int c; + + csum = 0; + bp = buf; + + while (1) + { + c = readchar (remote_timeout); + + switch (c) + { + case SERIAL_TIMEOUT: + if (remote_debug) + fputs_filtered ("Timeout in mid-packet, retrying\n", gdb_stdlog); + return 0; + case '$': + if (remote_debug) + fputs_filtered ("Saw new packet start in middle of old one\n", + gdb_stdlog); + return 0; /* Start a new packet, count retries */ + case '#': + { + unsigned char pktcsum; + + *bp = '\000'; + + pktcsum = fromhex (readchar (remote_timeout)) << 4; + pktcsum |= fromhex (readchar (remote_timeout)); + + if (csum == pktcsum) + { + return 1; + } + + if (remote_debug) + { + fprintf_filtered (gdb_stdlog, + "Bad checksum, sentsum=0x%x, csum=0x%x, buf=", + pktcsum, csum); + fputs_filtered (buf, gdb_stdlog); + fputs_filtered ("\n", gdb_stdlog); + } + return 0; + } + case '*': /* Run length encoding */ + csum += c; + c = readchar (remote_timeout); + csum += c; + c = c - ' ' + 3; /* Compute repeat count */ + + if (c > 0 && c < 255 && bp + c - 1 < buf + PBUFSIZ - 1) + { + memset (bp, *(bp - 1), c); + bp += c; + continue; + } + + *bp = '\0'; + printf_filtered ("Repeat count %d too large for buffer: ", c); + puts_filtered (buf); + puts_filtered ("\n"); + return 0; + default: + if (bp < buf + PBUFSIZ - 1) + { + *bp++ = c; + csum += c; + continue; + } + + *bp = '\0'; + puts_filtered ("Remote packet too long: "); + puts_filtered (buf); + puts_filtered ("\n"); + + return 0; + } + } +} + +/* Read a packet from the remote machine, with error checking, and + store it in BUF. BUF is expected to be of size PBUFSIZ. If + FOREVER, wait forever rather than timing out; this is used while + the target is executing user code. */ + +static void +getpkt (buf, forever) + char *buf; + int forever; +{ + int c; + int tries; + int timeout; + int val; + + strcpy (buf, "timeout"); + + if (forever) + { + timeout = watchdog > 0 ? watchdog : -1; + } + + else + timeout = remote_timeout; + +#define MAX_TRIES 3 + + for (tries = 1; tries <= MAX_TRIES; tries++) + { + /* This can loop forever if the remote side sends us characters + continuously, but if it pauses, we'll get a zero from readchar + because of timeout. Then we'll count that as a retry. */ + + /* Note that we will only wait forever prior to the start of a packet. + After that, we expect characters to arrive at a brisk pace. They + should show up within remote_timeout intervals. */ + + do + { + c = readchar (timeout); + + if (c == SERIAL_TIMEOUT) + { + if (forever) /* Watchdog went off. Kill the target. */ + { + target_mourn_inferior (); + error ("Watchdog has expired. Target detached.\n"); + } + if (remote_debug) + fputs_filtered ("Timed out.\n", gdb_stdlog); + goto retry; + } + } + while (c != '$'); + + /* We've found the start of a packet, now collect the data. */ + + val = read_frame (buf); + + if (val == 1) + { + if (remote_debug) + { + fprintf_unfiltered (gdb_stdlog, "Packet received: "); + fputstr_unfiltered (buf, 0, gdb_stdlog); + fprintf_unfiltered (gdb_stdlog, "\n"); + } + SERIAL_WRITE (remote_desc, "+", 1); + return; + } + + /* Try the whole thing again. */ + retry: + SERIAL_WRITE (remote_desc, "-", 1); + } + + /* We have tried hard enough, and just can't receive the packet. Give up. */ + + printf_unfiltered ("Ignoring packet error, continuing...\n"); + SERIAL_WRITE (remote_desc, "+", 1); +} -- 2.30.2